How to FINALLY DISASTERPROOF your 6.7 POWERSTROKE!

How to FINALLY DISASTERPROOF your 6.7 POWERSTROKE! - HOLY GRAIL MOD!

Рет қаралды 416,828

3 жыл бұрын

DISASTERPROOF your 6.7 Powerstroke with this! Full overview and first impressions of the new SPE cp4 disaster prevention kit!
GET THIS KIT HERE:
bit.ly/Disaster_prevention
Powerstroke master upgrade: bit.ly/powerstrokeupgrade
POWERSTROKE STAGE TWO KITS:
bit.ly/stage_two_kit
MY TURBO KIT:
bit.ly/STAGE_four
S&B OPEN STYLE INTAKE:
bit.ly/SB_OpenStyle
Follow my instagram:
bit.ly/COREYINSTAGRAM
The Best Foam Canon
amzn.to/333Drkd
Pressure Washer
amzn.to/2xGl6xW
Iron Remover
amzn.to/2R6g58D
My soap
[TOP SECRET] for now
Clay Bar I use
amzn.to/2R7lZ9D
toyota
cars
JDM
Supra
2020 supra
mkv
a90
b58
ford superduty
f250
diesel trucks
moderndieselcorey
Corey vlogs
diy install
6.7 powerstroke
diesel straight pipe
lifted trucks

Пікірлер: 495

@flyinghigh5531 3 жыл бұрын

most descriptive and simple video I’ve seen on the cp4. Same with All your videos and products for the 6.7. thanks for the video

@hunterwanabe 3 жыл бұрын

i bought this kit because of this video and how easy it looks and the fact that the parts look heavy duty. Great video keep it up!!!!!!!!!!!!!!

@leelucas2935 3 жыл бұрын

I have mine ordered can’t wait to get it!! By far the Best design in the industry!

@millerjacob75 3 жыл бұрын

If I had a 6.7 (got a 6.2) I would get this kit, looks well thought out and user friendly on the install.

@jeremywininger506 3 жыл бұрын

Thank you so much man!!! I was just looking at cp4 protection yesterday and everything looked like a pain. This just answered my prayers!

@wheelinndealin 3 жыл бұрын

This is sick, perfect explanation

@stephengutsch6366 3 жыл бұрын

That is wicked sick, that’s my next upgrade right there bro.

@dustinperrier502 3 жыл бұрын

Great informative video. Thanks buddy, been watching your videos for some time. You have come a long way with your videos. Keep it up

@Trav450ER 2 жыл бұрын

New viewer/subscriber here and also a new Powerstroker owner. Just wanted to say, this is by far the best video showcasing the ease of install and how this kit works. About an hour after watching this, I watched the episode on TruckU where they halfass explained what the "Disaster whatever kits" as they said, do and how they installed it. I stopped watching once they got to the part where they cut the line... Your video made me a buyer, so keep up the good content sir 👍

@acdii 3 жыл бұрын

Waiting on SPE to start shipping these out, ordered one a month ago. BTW your run down using the actual pump in hand was the best on the nets and cleared up a lot of questions I had regarding the way the pump is fed. I was confused on how it separated the crank from the heads, but have a very clear understanding of it now. 2 thumbs up, while I still have them.

@acdii 3 жыл бұрын

I got mine last week and installed it Sunday!!!! Beautiful kit!

@Rozza43 2 жыл бұрын

Did for me too, I have installed a handful of a different brands kits...and I would always scratch my head on how the fuck it was redirecting metal from the system. The kits we use, you have to cut the fuel line and use a compression fitting to attach to it.

@goldenboygq9 2 жыл бұрын

I dont even own a 6.7 and I want to buy this kit! 😂 looks awsome easy to install and you explained very well 👍🏼 time to buy a 6.7!

@JaydenBlakley 3 жыл бұрын

U should make a package that has all of your personal favorites to do to the trucks

@billwaterhouse5894 3 жыл бұрын

Very good and clear explanation on how this new part(s), work. Looking forward to the install video...and some review/feedback. Thanks Cory

@TopCorey 3 жыл бұрын

Thanks for the support bill!

@cclcanadiancountrylife3628 2 жыл бұрын

@@TopCorey hey I was on the website trying to buy this spe kit and there was no option to ship to Canada, can I get this shipped to Canada? Or am I out of luck? Lmk thanks

@DieselLegiance 3 жыл бұрын

Nice 👍🏼 I have been thinking of getting a Powerstroke and this is great info.

@kylenelson6947 3 жыл бұрын

Welcome back brother!

@stevens4321 2 ай бұрын

Now I'll buy it, thanks for your video man!!!

@Akhazmat907 3 жыл бұрын

Thank you. I just got a 2017 f450 with 6.7l flat bed. Has 80k miles on it and I want it to last. I don't plan to boost up the turbos but this kit is more my speed. Thanks again.

@LynnDixon Жыл бұрын

S&S Diesel's kit includes a big filter for the return. It uses a Donaldson filter, which are readily available, and filters far better than a screen. All the fuel line connections on their kits if using all the Ford OE style click-fit fittings.

@marymenant9661 3 жыл бұрын

Great video. I have need working with my brother thy is a diesel mechanic since I bought a truck. All though I have a 6.0. I still like to learn about everything all these truck have.

@MKV.Joshhh 3 жыл бұрын

I don’t even own a powerstroke but I’m lovin this video lol

@realcdcruze3558 3 жыл бұрын

Glad you are ok. My Dad just got diagnosed with stage 4 big C, been killing me.

@samgonzalez6859 11 ай бұрын

How cool!! Awesome video! Will get one for my truck right away!

@danepedregon 10 ай бұрын

SPE IS A BLESSING

@willb7975 3 жыл бұрын

Eagerly awaiting the follow-up for the install ... hope the other distractions are resolved, wishing the best.

@fredluden2298 2 жыл бұрын

Can’t forget the ceramic bearings in the turbo. That’s a fun weekend when those go out….

@mikebennett5284 3 жыл бұрын

Ordered mine on Black Friday! Love the channel! Any thoughts on spin on fuel filters under the hood?

@aceseights8815 3 жыл бұрын

Well done! 👍🏼

@ZachClynes 3 жыл бұрын

Definitely going with this Kit

@blainemaestas88 3 жыл бұрын

Good video. Love look of the platinum with those wheels. How much offset do you have on your wheels? What tires are those?

@Livin_my_best_life 3 жыл бұрын

Stoked to see the install. Will this work for the ‘16? Not sure if anything other than tuning is different between the years. Already took my truck to Mexico and lost “some parts”

@rt427lsx6 11 ай бұрын

Awesome video buddy

@adriansmeds4800 2 жыл бұрын

Well this was good to know since my Volvo 2L 5cyl is equipped with the same pump😅

@xmarcos0922 3 жыл бұрын

Would love to see it on your truck. Had issues with the S&S one causing low rail pressure so I took it off.

@carls2210 3 жыл бұрын

Can’t wait to get mine in. Also ordered a new MPROP. After watching Ronnie install it he suggested just in case the o rings are bad.

@kylebrenay174 3 жыл бұрын

What bad oring is he referring to? Seems like you dont need the MPROB with this kit. It gets fuel right from the filter.

@carls2210 3 жыл бұрын

Kyle Brenay the o-rings on the inlet metering valve (MPROP) that you connect to on the CP4

@jroddri 3 жыл бұрын

I love my 6.0 and yes I had it BP Zero issues, when i tell people its BP they actually u can shoot at it 😂🤣

@jadyngross9097 2 жыл бұрын

Yessir 6.0 is a good truck

@Johnny-lm4qu 3 жыл бұрын

i just got a diesel truck and i can i love it its not that bad and i was kinda dissing trucks for a while thinking they wouldnt be good but they changed my mind

@TopCorey 3 жыл бұрын

👍👍

@Rebel-Neck 3 жыл бұрын

My 2012 f350 is still going strong at 135,000 miles. All stock on 35 in tires. Even my Ford buddies think it's lifted with all these aftermarket parts and in reality I haven't added anything lmao pulls better than any of my buddies vehicles by a longshot.

@snookymaguire4570 Жыл бұрын

I 'm glad you don't have the big C, You don't have your heath you got nothing! Love your truck man,Great Vid, Keep up the good work!!!!!!

@travhxc1174 3 жыл бұрын

Deff gonna pick one of these up

@theneverman 3 жыл бұрын

Very well done video.

@Moes_Adventures 3 жыл бұрын

Thanks for showing this kit. I will be buying one.

@TopCorey 3 жыл бұрын

No problem!! Thanks for watching

@jimmysmith7007 2 жыл бұрын

@@TopCorey can I get the website to other the kit plz

@worm1300 3 жыл бұрын

Man you are so much better at this than Dan is 😂 it was cool watching his product drop video but he is definitely not cut out for that aspect of all this haha

@LikeNew77 3 жыл бұрын

cp4 is the heart of the truck

@rstrick1978 3 жыл бұрын

Thanks for the simple yet effective explanation! Seams like less than an hour install. Next addition to my truck, aka Snow Goose.

@cantwalkful 3 жыл бұрын

I wish buddy. It takes at least a hour just to get to the top of the cp4 and I have done 4 times installing exenrgey mprop valves. Also reinstalling the upper intake manifold is a bit#h

@adamhudson784 3 жыл бұрын

Awesome explanation. Are you also running a Fass fuel system?

@Hoghunter245 3 жыл бұрын

This video is so much better than that dumpster fire of a video that results will vary came out with

@c.mcdonald5338 3 жыл бұрын

Funny, I just ordered it... installing this weekend...

@c.mcdonald5338 3 жыл бұрын

Once it arrives, that is.... they’re slammed with orders, still waiting.

@playingoutsideafter50 Жыл бұрын

Thanks for this I definitely want to get it done I see this was two years ago Has anything better come out? If not I plan to get this kit you featured Any idea about how much someone would charge to install it?

@seanyoung7184 3 жыл бұрын

I can't wait to hit 36k. I'll be on SPE's Fanboy list! Installed their high flow low temp thermostat, very happy!

@curtisbull1583 3 жыл бұрын

Why did you install a different thermostat, what are your benifits? Thanks

@TheKing-nu4fk 3 жыл бұрын

@@curtisbull1583 well probably the whole "high flow low temp" part but thats just a guess

@elic5355 3 жыл бұрын

I’m saving to drop that on my town car,it’s going to be funny and fun.

@Andyblasz 3 жыл бұрын

Great Video

@herbdeazvedo1993 3 жыл бұрын

What size lift did you need for that wheel/tire combo? And what size, offset are they? Looks nice man!

@safjimmytovarofficial2492 3 жыл бұрын

24x14 on 35s. Stock lift he put bumper spacers so he doesn’t rub. Check his channel out he made various videos about the wheels

@Mrsineauctore 3 жыл бұрын

If your fuel pump fails, won't pressure in the fuel rail return line also drop? And if it drops, is it possible for return fuel from the cp4 to migrate into the fuel rail by short circuiting the t and new inline filter? The micron filter will create backpressure, so there needs to be assurance that the fuel rail return pressure will remain higher than the filter back pressure in a failure scenario.

@amcneil4625 3 жыл бұрын

I was wondering when and if there will be a stage 2 upgrade kit for the 2020 model f250.

@lakendrickcantlow1343 3 жыл бұрын

Does running Lucas fuel treatment help at all to prevent bad fuel contamination or poor cp4 lubrication

@glennbreaux4270 2 жыл бұрын

Love the video Just had to replace all fuel parts because CP4 ate shit. Looking into getting this product today. My question is what tuner do you run and what MODs. do you have. I have a stock 2011 F350 SRW that has a lot more power that's being held back. Don't want to do anything stupid to old for that. I want something for fuel mileage and towing. Any help is appreciated.

@kylebuckner4784 3 жыл бұрын

Soooooo we gonna get a direct link on where to purchase this particular one?

@Prestige.Worldwide 3 жыл бұрын

Will the fuel screen on the mini keg cause any issue from flow restriction? How often should that screen be checked and/or replaced? If the screen starts to plug off, what issues could arise?

@nfox0607 3 жыл бұрын

Its a return, so no, there would be no issue with fuel restriction.

@richardc7721 2 жыл бұрын

@@nfox0607 something has to happen if there's no return.

@jeremydesrosiers4355 Жыл бұрын

@@nfox0607 that is not true. A restriction in the return can cause cavitation issues

@stngstr Жыл бұрын

If the filter screen in the mini keg is obstructed, that means your fuel pump has shit the bed. You'll know it when the truck runs like garbage, check engine lights, etc. You'll have to replace the CP4 pump, but at least you won't need a new engine and/or entire fuel system/injectors/etc.

@joelmartin2826 3 жыл бұрын

I’m wondering if I can use parts of this on my TDI’s Bosch CP4 HPFP. Any thoughts? I’ve emailed the maker too-just waiting to hear back

@Rebel-Neck 3 жыл бұрын

Best kit I had seen was the fuel reroute kit that re-routes your fuel back through an additional filter before it goes to the fuel rails.

@DynoDieselWagon 2 жыл бұрын

That's a bypass system mo

@jottow680 2 жыл бұрын

You know of a filter that handles 20000psi?

@llmitche1 3 жыл бұрын

I appreciate the step by step!

@onesilentarrow 3 жыл бұрын

My 2017 now has 39k miles. Was in the shop with engine and transmission pulled out to replace the rear main seal. Starting severely leaking at 36k miles.

@damienrodriguez3288 Жыл бұрын

Well thank you sir. I’ve been running 7.3s since they came out. Finally got a ‘15 king ranch for pulling( definitely a non regrettable upgrade), so been doing some research on the 2gen 6.7 which seems to be the pick, unless they got that 10 speed figured out now. Anyways. Thanks for the detailed video. I will now be ordering this based on your review. Thanks a lot man! You earned my sub!

@joeshmoe8952 3 жыл бұрын

Besides this cp4 fix, what other things is there to fix on these trucks? I heard replacing the radiator is also good.

@philenglish8916 7 күн бұрын

Sounds like a great kit. I live in the Dallas area so do you know a shop to do instillation. Great video.

@PowerStrokeTechTalkwARod 3 жыл бұрын

When we gonna get you on the Podcast?!?!🙋‍♂️🤔💯

@littlefinkle7757 3 жыл бұрын

My 6.0L has over 340k and love it! EPA is the enemy of diesel trucks. Do the deletes and make any of them offroad trucks and you will have a much improved experience. I also love my 6.7L, my 2020 is a much improved over my 2016. Just gave my son the 6.0L.

@richardpatton4108 3 жыл бұрын

Pretty new to the channel, can I ask what you do for a living,and how you started?

@DavidBowen 3 жыл бұрын

I am new to the 6.7, I just deleted my truck @ 99,000 miles. I'm looking to do as much to my 2016 F-350 as I can to improve the longevity of it. I don't know much about the CP4 and had no idea that it was a problem. Does the 2016 have the CP4?

@ryanbunnell3752 3 жыл бұрын

Just had the CP4 failure on my 2016 6.7 Powerstroke. $8000. Forgot to have them “bulletproof” it. Must do this ASAP!

@christopherkoch5516 3 жыл бұрын

Just picked one up glad to help you out however possible. Which do you prefer Teflon tape or liquid thread sealant?

@JohnSmith-lw2bm 3 жыл бұрын

Not regular plumbing tape. Need whatever you decide to be rated for hydrocarbon service. Teflon tape leaks when used on diesel.

@mollyboland4704 3 жыл бұрын

Thanks for the video! Hope you're Family is safe and healthy. Do you recommend this kit on every 6.7?

@haasehaase2176 3 жыл бұрын

I had a question about your sport transmission tuning I bought by ez lync tuner from some place because I did not know about your so the only way for me to get the sport trans tune for my power stroke would be to buy another tuner from you or how would that work?

@michaelawe3681 2 жыл бұрын

Thanks for sharing. I would agree, this is a simple insurance policy. I own a near end of production 2011 6.7. If I am correct, this kit fits on all 6.7's (Want to make sure.) While looking at some of the other kits listed, the tuner caught my eye. But it does not work o a 2011. Can you recommend one for my '11 F350?

@madbommer2843 2 жыл бұрын

Curious too.

@juanandrade3038 3 жыл бұрын

This is awesome!! My only issue is I found this a week too late! I have/had a 2012 F350 with 228,000 miles on it. was running great, interior an body were solid. The fuel filter cracked and sprayed fuel all over the engine compartment. Easy fix, replace the filter right......wrong! Not enough fuel was feeding the pump causing catastrophic failure. Long story short Ford is asking $11,000 another shop will do it for $9,900 (including a disaster kit). A $20 fuel filter turns out is going to cost me $11,020.....unbelievable.

@scottjohnson676 3 жыл бұрын

My failure on 2011 F350 was two summers ago. $7200. Plus I had to wait a couple months for the parts which were on backorder. Apparently this is a common and profitable repair.

@HarryDangler69 2 жыл бұрын

That’s what scares the shit out of me to buy one of these.

@arfatstroller3681 3 жыл бұрын

These rim are perfect match

@joeymerrell8585 3 жыл бұрын

Just got my email from spe yesterday that mine is on the way. I’m like a kid waiting on Santa

@chrisosborn2274 3 жыл бұрын

I got an email also, not good the news you got tho lol

@MrBubinski777 3 жыл бұрын

MCDONALD'S COFFEE IS PHUKING AWESOME MAN!!!

@MW3HAXX 3 жыл бұрын

Got mine ordered! What are you doing with that old CP4? Is that the one you pulled off your 17? I’ll take it off your hands if you ever wanna sell it. I have a 13 and want to run 10mm fuel

@PickledPubes 2 жыл бұрын

I’m looking for a good reliable truck that’ll last me a long time, is a later 6.7 a good option? I’m stuck between a Toyota Tundra and a newer 6.7. Any opinions?

@seejay8907 3 жыл бұрын

Can you post ride height in the front? Ground to top front bumper be helpful thanks or wheel well

@choo03 2 жыл бұрын

I want to DIY the disaster prevention kit but a little timid for the where the supplied o-rings go on the part that attahes to the Cp4. When removing the EGR and plenum will any coolant leak?

@nstewart636 2 жыл бұрын

What about the plastic clips on the rocker arms? I didn’t see them but we had a guy at my work break them in the work truck. I haven’t had any issues with my personal 6.7 so I don’t know.

@ljs2274 3 жыл бұрын

How long does the factory set up usually last ? And does this void warranties ??

@kyleneufang6379 2 жыл бұрын

I would 100% void warranty on any fuel related issues. HOWEVER if it was brought to me and asked to install it I would and keep your warranty cause I know I did the work.

@DavidLenarz-dv6ez 2 ай бұрын

Hey Brother, I am happy to announce that I've purchased my retirement truck. The proud owner of an F350, 2019, 6.7 PowerStroke! I'm a retired Marine and want to BOSS it up! after watching several 6.7 channels the decision has been made. We are subscribing to you and hope you'll help us turn the beautiful truck into a head-turner. As of now, I've got to replace the glow plug 6 LOL, I'll be doing the whole side and the other side next week. Other than the SPE, what else would you recommend? OUTSTANDING VIDEO! Ya'll be cool, SSGT DAVID E R L USMC

@wretchedrider2157 3 жыл бұрын

If there's debris clogging the little beer keg, a) wouldn't it clog/backup return fuel going back towards the tank? B) overall with a disaster prevention system like this, how do you know a cp4 breakdown or explosion occurred? Will the truck throw a code? A good awful noise from the engine bay? Great video though, I finally understand with visuals what happens with a cp4 failure. Thank you!!

@wretchedrider2157 3 жыл бұрын

@Michael Smith it does help, thank you. Run poorly or not at all, but the kit prevents the engine from grenading?

@masterofnone6620 2 жыл бұрын

Yeah pretty much. This just happened to my brother. Cost 11 grand to fix. He told me to do this to my 6.7....so I will.

@masterofnone6620 2 жыл бұрын

Yeah pretty much. This just happened to my brother. Cost 11 grand to fix. He told me to do this to my 6.7....so I will.

@stngstr Жыл бұрын

@@wretchedrider2157 It prevents metal from a failed pump from screwing your injectors but it ALSO prevents that same metal from going back to the fuel tank and screwing up your tank and fuel lines. It contains the metal shavings from the failed pump. Yeah...you'll still have to replace the CP4, but you won't have to replace injectors, the whole fuel system, and possibly the engine.

@kylecampbell1891 3 жыл бұрын

when is SPE going to start shipping to Canada?

@carl2591 3 жыл бұрын

according to the website it fits to the 2021 model.. its 50 state compliant so it should not affect warranty if needed. If I had a newish truck it would be added just as a protection measure that you hope is NEVER needed.. aka.. cheap insurance.

@pagecampbell2385 3 жыл бұрын

Corey I am going to install the cp4disaster kit should I go ahead and up grade to the Exergy CP4 Inlit Metering Valve it's a 2015 with 68000 miles on it

@tedbarnett6280 Ай бұрын

That’s funny you where a hotshot I was a Drilling Consultant for the oil field in penn and Ohio I called all the time. I wonder what year u where doing this

@assassinsfear2052 3 жыл бұрын

Turbos and EGR coolers as well.

@HTSS8 2 жыл бұрын

And that return isn't pressure backing up the return fuel with that super restrictive screen?

@Yooper05 2 жыл бұрын

I have to ask, does this void your warranty at all? The other question is, is this necessary if your truck is still covered under warranty? It’s in the cart and I’m ready to order. Just want to make sure before I do.. thanks for all your amazing videos and knowledge sharing.

@TopCorey 2 жыл бұрын

The dealer can attempt to tell you any modification can void the warranty. Im sure if you have injector or pump failure and they see this on there they will tell you it was from this. They can even tell you that it was caused from fuel contamination or water in the fuel and not cover it (that's a bit extreme). It depends on the dealer/tech. If your super concerned with the warranty then i would keep the truck stock and keep a detailed service record of all maintenance. Or make a friend that's a ford tech 😜

@ivansolis2465 3 жыл бұрын

Are those injectors leak oil cuz I have a 2017 f350 and I see like a little oil leak on the passenger side injectors it seems it comes from the injectors but those days was very cold I don’t know maybe its a gasket but I don’t know whats your opinion help me I don’t wanna take it to the dealer cuz I deleted the truck and only has 70k miles. What u think should I put back the original exhaust????? Help you smart boy

@tonyodom4214 10 ай бұрын

Is there an additive to help prolong this issue.?

@apdiesel6634 3 жыл бұрын

Do u have after market fuel injectors

@BooneTang250 3 жыл бұрын

With just a deleted truck, 19f350, so you need to worry about the pump taking a shit?

@johnholems7147 7 ай бұрын

I have 2016 F-250 diesel. 46,000 miles all factory. What do you recommend I do first!!!

@enterprise59 2 жыл бұрын

One has to ask, WHY does FORD not put these things in their trucks anyways!?!?!?

@tylerhansen4489 7 ай бұрын

Gotta make sure the mechanics have a job

@LUCKYSOB 5 ай бұрын

Gotta make that dolla

@TunaCat929 3 ай бұрын

I think they just didn’t know the longevity problem, also people tuning them and all the new emissions. It definitely cost them a lot of money and that’s why they cut ties with International

@rolexshine923 3 ай бұрын

I disagree the REAL question here is why not just install a CP3?