Good, Good, God Damn it...

There is, probably, but u can disassmble the key plate from the door, so it stucks in the security switch all the time. Useful, but dangerous, per example, someone leans on the door while the machine is running.

some bypass the doorlock to open it mid-operation. its veeery dangerouse and if a supervisory authority catches you having an accident with an bypassed door..ohhh boy your boss is getting roasted. but still, lot of employees do it because its handy and you can look better at your part at critical situations..just never let it open when you actually run the machine because a part can always fly out or you take a lil cooling shower. beside that. older machines just dont have this kind of safty. look at very old mills. they dont give a fuck

Fair use? Not even close. The use of material was not transformative and was taken for views without even mentioning the original content creator. They proudly reference the public domain music but deliberatley obfuscate video to disguise its origins

OH, but you can't tell THESE guys! They are professionals! NOT!

@@pomonabill220 I learned not to trust anybody but myself, you got a CNC programmer been with the company for many years, knows his job. He will not be offended, if you check his work on a dry run, because you're just doing your job, as a machine operator.

너무 무섭다.....

I have used sticky two faced taped (also called manager tape) for years and years to hold hold down alot of flat work even up to .250 thick. Just need to be cautious of how aggressive you are and you have to use air blast rather than coolant. Then just use some mek to clean it all up. Sticky tape can do wonders in a cnc shop

Thanks captain

So that youtube does not detect that the clips were taken from the original copyright holders and most likely not used with permission

@@iitool ok

as a cnc programmer and operator at the same time, I think those crashes happen bcuz programmers are sepparated, they don't communicate together

@@just_Lee2not only that. The operator, programmer, engineer of design of the CNC machine , safety officer are often work separately & lack communication with each other.

Probaby another one that believes in taking 3-inch cuts with no coolant and a chip like a hay bale wrapped around the spindle.

I was wondering as well... But looking closer there's a fire-extinguisher on the side of the machine, so they might be cutting some kind of easily flammable material, maybe some sort of plastic?

Looks like magnesium or titanium chips caught fire. Fine chips from these metals especially magnesium are VERY flammable! How do I know this? Been witness to a few in the shop I used to work at. They require a specialized type of fire extinguisher to put the fire out as well. Probably what that extinguisher is on the machine.