kurtis definitely put us on a winner when he suggested following your content 👍

When you no someone is sick (and likely hurting) but they appear calm and stoic, like they haven't a care in the world? That's called class

Hi Matty. This is a great little build. You make it look easy. Hope your treatment went well and your not feling too off. You called yourself lazy but i highly doubt that is the case. You're doing stuff and mzking these videos for us to sit on our backsides and enjoy. Get your legs under you and dont rush. We'll be here.

Good to see you busy, take it easy when you need, or have too 😉. Another great build Matty. Thanks for sharing.

Great build. Very smart little bit of kit to have! All the best with the second round of chemo mate, hopefully the recovery will go well!

Superb surface finish Matty! Glad to see that you are still in high spirit.

I like the threader you just made because it really keeps your hands and fingers out of harms way when it is threading your work piece. Rest up Matty, don't over do it you have to recharge your body after a treatment. I know because my best friend is going through it with brain cancer, and I take him to all his treatments, some days it is good after the treatment , we even go to dinner in a steak house. so Cheers always

There’s a dearth of good content from my (extensive) list of subscriptions on Thursday mornings (UK time) so thank you so much for what you do. Wishing you a full and speedy recovery Marty. Mike

Another great build and top tool there mate. Thanks for your time and the video Matty. Have a good one 👍🇦🇺

Great job Matty. Dont do too much if you feel like crap. We are here for you. ATB regards from the UK

That’s a really neat die holder. And a great job on the making of it. Very nice job. You take it easy with the treatment and we will see you when you feel like it no pressure. We are glad to give you some support 👍👍

Matty, this video shows you are at 20K plus. Great work on your side, always a huge pleasure. Thank you 👍💪✌

Matty still praying for you.. keep on fighting. Cair for you like a brother man.

young man, you got this, we'll all be waiting, your health must come first. and the die holder, it came out awesome, very well made, nice work. keep it up.

You made a stunning job of that Matty! Keep rolling with the punches buddy, hope round 2 is not too rough. Cheers, Jon

Hi Matty. All the best for the treatment. The die holder looks and performed very well. Have a great week.

Hang in there Matty, hopefully the future chemo sessions don't hit too hard. Great to see you back in the shop for what looks like a very useful addition to the shop made tools. Regards from Canada's banana belt.🤞🇨🇦🍌🥋🇺🇦🕊️🇦🇺🐨👍

G'day Matt. I hope all went well with today's treatment. A fantastic build of this kit. Top job mate 👍👍👍

Great project and a really nice job on building it Matty. Thanks for sharing.

Great work mate a tool of beauty....looks like a fun build

The unplanned decorative machining at 29:08 should go viral on machining channels to show the effects of unbalanced vise loading. We can all learn from this. At least the tool didn't break !

A very small amount? A “poofteenth” of course !

For anyone interested it is really worthwhile watching his previous videos they are all top notch

Thanks Matty. Hope the chemo is bearable and you feel better as the treatment progresses. Another excellent build!

That was a beautiful job Matty. You certainly can call yourself a machinist of the highest calibre! ( true machinists are allowed only one fuck up per job so you're on the money mate!) Your finishes are bloody awesome ! Good luck for your next treatment my friend. And don't rush back out to the workshop if it knocks you about a bit. We can wait! Cheers from England, Sam

God Bless you and your Family We will keep you in our Prayers.

Your quite the metal guru - nice job with the threading it does spin good. Good prang, I usually bust the tool as well! All the best Matty

Another nice build! Thanks for filming it! Take it easy during your treatments and I'm wishing the best for you!!

Clever design. Nicely made, as usual. Good work Matty

You deserve all the support you are getting Matty. And then some.. Great build showing your skills and honesty, so thanks again.

Excellent job Matty, nice looking kit...best wishes my friend..

Absolutely made my morning Matty. The filming to the finish part was more than first class. I am so glade to see one of us felling better, cause the MaPom they are pumping in my vains really suck. Thinking of you after, and Keep on Let us all know how you are progressing. I am on my third round of chemo this coming Monday. Number 2 blow my doors off. Not sure if I will make all 6, but going to give it Hell! Bear

Nice job Matty. You will hit 20K with no problem. Take care of yourself.

Hi Matty That was a neat little build. I am intrigued by the clutch mechanism. Looking forward to the next build. I hope everything went well with the treatment.

Good to see you in the shop doing what you enjoy.

Beautiful work, hope round two goes well and you don’t feel too💩. 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

Great job as usual, hope you don't feel to crook after the treatment. It's a cruel world when an absolute top guy as yourself get the dreaded human rust. I just hope that the treatment is successful sooner rather than later

Bloody fine engineering skills Matty. I'm rooting for ya mate. Take your time and if you feel a bit crook, lay off a bit, we can wait and if you didn't have a cock-up now and then you wouldn't be human. All the best.

Hi Matty Great to see you doing well, hope the next treatment is easier than the last. As far as the die holder goes, jobs a good ‘un. Always like your videos, no time wasting repeating yourself, just good honest machining, warts and all.

began watching last night but ended up finishing today, thanks for keeping us updated with your health, Matty, keep going strong. Enjoy watching your experience and builds, much appreciated.

Nicely done Matty, the die holder looks great!

Another quality, educational and entertaining build 👍🏻. Our prayers are with you Math from the US 🙏🏻

I don't know if I would ever use a tool like this but the quality of the kit really makes me consider buying them to have fun machining them in some spare time. Another great shop tool build Matty.

eres un genio amigo te felicito saludos desde Chile

Superb work on the die holder Matty. You made a wonderful job of it. Hope you recover the next treatment quickly. All the best. Cheers Nobby

Great tool, great video Matty and a great give-away, congratulations on the sub count, well done friend, cheers!

20.3K. Three days later! Congratulations Matty! Hopefully you are doing well, looking forward to seeing more of your work, always a treat.

That is an awesome die holder, and I enjoy watching you work with the commentary. We are praying for you and the family.

Dam that's nice great job Matty I'm going to order one glad to see your doing well

CEE sent me. I'm already a subscriber, but I'm just hearing the news. Much love from MI, US.

Dang, I would actually go for your die holder except I already have the Hemingway one. Thanks for sharing 👍

That's a pretty cool die holder ... and incredible workmanship on your part! I'm guessing the handle really only needs to be strong enough to engage the clutches. Thanks for sharing 🇨🇦

Seems like a nice bit of tooling to have. Enjoyed watching it. Hope you bounce back from this round quickly.

That's a great tool, I really like it. Beautiful job.

GOOD morning from Oregon Matty hope your doing well!! Got me coffee and stayed upto catch your video.. CHEERS!!🙏👍 Works quite nicely mate!!

Hang in there brother, you bring great joy to your fans!!!!

Subscribed, god bless you and I'm with you on your fight with cancer. God bless from the USA!!

Goodluck with your chemo Matty. I jumped on board when CEEA mentioned you and have enjoyed this channel.

Another beautifully made piece of kit Matty, you should be proud. I have just started making a new button die holder myself, but my little homemade lathe would struggle to hold the tolerances needed to make something like that. I hope the Chemo doesn't knock you around too much, I watched my dear old dad go through it 25+ years ago, but I'm kind of assuming they have managed to refine that gunk a bit since then. 👍

That's going to be a very nice gift. Good idea to make something yourself. Hope you're doing OK with the chemo treatment.

Hi Matty, outstanding work buddy. Keep up the good work.I hope everything goes well with your treatment, Hang in there buddy. Stand strong. Your going to beat it..

Thinking about you with your chimo..... All the best Matthew

Thanks Matty, that was informative 👍. I had wondered how that cone clutch worked, now it’s quite clear. Good video editing, too! Feel better fast.

An amazing tool👍

Very nice build! Looks like it works really well. A lot more complicate than a short handle you just let go of at a shoulder, but really nice to see how it works. Good luck with the chemo. Hope it works well for you and you dont feel too crap!

Nice work on that one Matty.

Another great vid Matty, thoroughly enjoyed it. Best wishes for your next round of treatment.

It's good to see you making things , I'd guess you'd say "what else would I be doing " Good luck on the treatment.

Looks the part ! 👍

Great work! Hang in there buddy!

You really are doing some great work. Kind of amazing given your circumstances. Hang in there!

Very nice build.

Hi Matty. Another very good video. Hope you are felling ok after your treatment. Cheers

Pretty nice design. Well executed build (minus the oops). Keeping you in my thought and prayers, Matty.

Get well. I hope your treatment goes well

I see elsewhere you say "I got luck on this build with only the one fuck up thankfully," ..... I think on this one you can blame the tools and we will not complain! Though it was probably an imperfection in the metal...... Meanwhile - good luck on round 3.

Hey Matty 👋🏼 Very noice ( as we say in Western Sinney) 👍 Good luck with the treatments…. we’re all with you 1000 % 👍 Keep Punchin’ mate… Robert

Nice bit of kit Matty. Nicely made and i assume the clutch faces must remain oil free to avoid slippage.

Hi Matty I hope the treatment has gone well and not knocked you back too much. My very first KZfaq video was a die holder. At that time I could not understand how I had worked so long without a die holder. But the issue I have with my one is that I use it manually, without power from the lathe. I'm too scared to make threads with it under power. Now your die holder with the clutch is exactly what I need to cut threads under power. If something goes wrong then you can just release the handle and everything spins. Thanks for the video, I'm going to add this to my list of builds.

Far out Matty, g'day mate, good luck with the treatment, great chatting the other day by the way, nice to see you swear as much as me in real life too lol, keep at it my friend, you're a star

G'day Matt great from start to finish!! i did'nt notice any fuck up, only quality workmanship!!👍👍👍

Looking good, Matty. Sending chooch from the states.

Great job mate nice to see you working😂

Thanks for ANOTHER GREAT BUILD... TOOL MAKING AT IT'S BEST 👏👏👏👏👏 Sorry Matty, just a fan of great craftsmanship. Stay STRONG BUDDY from da Bronx jb

I've been thinking about making this, might try following you along. Hope the treatment's going to plan, glad you're in the shop keeping busy. Take care mate.

Great job as always. Prayers to you Matty. You are fortunate to be living in this generation buddy as they have wonderful treatments now days so keep your spirits up and fight the good fight my friend as I am sure you will come through it.

I found you through Kurtis at CCE, wishing you the best Matty! Great videos.

hi from Denmark .. and the Curtis famely dog bird´s wife

Hi Matty, popping over from the Cutting Edge Engineering Australia channel with Kurtis. Wishing you well and may you health improve. Greetings from Belgium.

Hi Marty, I hope you’re doing better after your procedure. I just bought those Hemingway plans for the tail stock die holder the shipping was jest as much as the plans and stock in the United States, but after watching you make yours I thought I would give it a try. Take care my frend.

Matty nice bit of kit!

Hi Matty. You are going through what i have been through & it is not nice. But what i will say is you are handling it better than I did. I locked myself away & that was the wrong thing to do. Chin up fella. Steve.

RightOn

Great job! I wish I could do as good a job as you do! I hope your treatment goes well for you!

Very well done and the finish turned out awesome! Not sure if you follow CEE, but I really enjoy watching both you guys. 😉

You're a bloody master! Just a question on forming the male cones. Did you just machine down to a similar "point" by eyeballing it to get them consistant? Because that looks a pretty difficult edge/point to measure accurately. Again, a masterful job! All the best with the rust removal. If you're having teament in Canberra, remember; I'm here - ready, willing and able to provide any support that I can.

Matty get well soon

Another great video thanks Matty. I must be a dummy, I couldn’t figure out how it actually works, with the cone clutch and the handle thing. But the build you did was great.

Nice job my brother from down under. Hope the chemo treatment went as well as can be expected.

Awesome job as always Matty.