Modify a USB wire to Power a DASHCAM - No PC Mode Tutorial Guide

Рет қаралды 30,543

6 жыл бұрын

In this tutorial we show you how you can modify a standard usb wire to power your dashcam or whatever other usb based device in your car without entering data or pc mode.

Пікірлер: 33

@kamehamehaiv2780 2 жыл бұрын

Thanks for that perfect video. I clipped the white and green wires, and now it works perfectly. My new car has five USB-C ports, and one of them is located at the top of the windshield to the right of the rear-view mirror. Therefore, I have no need for a cable hanging down and getting in the way when I shift. Your solution was a godsend. Thanks a million!

@mjr333 4 жыл бұрын

It works in my 2017 Mazda 3. Big thumbs up. Now i can use the cigarette lighter socket for charging my phone.

@thewishmastur 2 жыл бұрын

this is the video i was looking for. thanks

@davidlampe4153 7 ай бұрын

Nicely done, brilliant fix simple and clean. Thank you doesn’t seem like enough.

@kayemcee9967 Жыл бұрын

Thanks for the very informative video. I had the same exact issue and followed your video step by step. Worked perfectly and fixed the issue that I was having with the USB cable.

@andrewfinck6320 4 жыл бұрын

Great this worked a treat!

@oscardiaz3968 3 жыл бұрын

It worked for me. Thank you!!!!

@user-bi6vi1zv6i Жыл бұрын

Good job, thank you.

@bfred3784 2 жыл бұрын

Sort of works with my Garmin 2595 GPS. It goes into the computer mode at first for about 30 sec and then changes over to the power mode. Garmin products detect something's plugged into USB port and then asks if you want Mass Storage etc. To make the modification really work I wonder if you have to also remove the two data pins at the plug end?

@mikehawk4517 3 жыл бұрын

Thank you!

@777koreli 3 жыл бұрын

It was working great 2 years, with the same cable and same adapter, but started showing "Mass Storage " now! :( its dashcam broke? or something else ??????????????????????

@maxlandy7642 Жыл бұрын

Would this help to prevent interference. My dab drops out when I plug my dash cam in. Some people say use USB cable as its shielded?

@alanhershkowitz181 4 жыл бұрын

Very helpful

@hippa2dahoppa2 8 ай бұрын

they make "power only" wires. i have a dash cam that runs on usb, in the instructions it says for data use your own data wire. the factory wire that comes with some dashcams are power only. the reason no camera view pops up is the cable. and while your technique works it would be easier to just find a power only wire

@timbrink 4 жыл бұрын

Didn't work with a garmin dash cam 20

@thewishmastur 2 жыл бұрын

i was hoping it would work on Garmin dash cam 20

@radpeak1297 4 жыл бұрын

great vid! so what cable i need to cut if i want the other way around? like using it just as webcam and i dont like it asks each time it asks what i wanna do as storage or pc?

@eriksrensen6369 4 жыл бұрын

Silly question.....the other way around? I don't think you know what you are asking.. It's like bla bla bla....rubbish. If you wanna use it as webcam you just cut the wire like in the video. That's the point of the video .-How stupid and ignorant are you?

@xipxip3784 Жыл бұрын

Although I’m sure this works, I was able to find a random micro usb cable that was power only. I think it came with a cheap usb lamp or something. So I would suggest checking around before cutting into a cable because it works just fine for me.

@richardmcleod4658 Жыл бұрын

Wow. This video is going to reduce the number of my cuss words by .................. a lot. Thanks.

@daviddavenport9312 4 жыл бұрын

I have the same issue but interestingly Mass Storage Mode (thinking its connected to a PC) just started happening in a camera and car that have been the same for 4 years - nothing changed as far as I know - weird - maybe something had a software update but no ideal which or how...

@eriksrensen6369 4 жыл бұрын

no no it's not software related....

@FestusHaggen1 4 жыл бұрын

Thanks for the video. My new truck doesn't have a 12v cigarette lighter . All I have is USB. I'll give this a try.

@rommelmiranda8475 4 жыл бұрын

Festus Haggen did it work?

@thewishmastur 2 жыл бұрын

did it work?

@buraionline 3 жыл бұрын

I tried connecting the black to black and red to red wires from 2 cutted usb cables intended for a LED strip light, still doesn't light though. Any thoughts as to why?

@11bsavage64 2 жыл бұрын

Shoot this is old but I will give you my opinion to you so every who has this problem can read it. The case maybe wire are mixing keep them apart or it could be they aren’t making proper connection. Recommendation make sure all wires are separate and you might need to solder the wires.