Mods Needed to Boost Your Car

Mods Needed to Boost Your Car | The Build Sheet

Рет қаралды 189,817

5 жыл бұрын

Is your car feeling a little sluggish? Are you struggling to get out of your own way? So maybe you're thinking about adding a little forced induction to the mix. Today Gels talks about some of the modifications needed to boost your car. Depending on what you drive it might not be the easiest mod, but it's definitely doable, and we're here to help!
Cop the giveaway shirt and get entered to win here!
bit.ly/2GZDRPc
Add your car to the largest online growing fitment gallery!
bit.ly/2obqAZQ
Subscribe here► bit.ly/2x8fvNX
Right now is the best time to get a new set of wheels:
bit.ly/2Imgo9B
Get low with some new suspension!
We carry both Accuair and Airlift Performance!:
bit.ly/2AeSSI8
We have plenty of Coilover options as well!:
bit.ly/2ChmsRw
Check out more videos like this!
/ fitmentindustries
#Boost #Turbo #Supercharger

Пікірлер: 387

@FitmentIndustries 5 жыл бұрын

If you could boost one car that didn't come from the factory with a turbo or supercharger what would it be and why?! Reply and let us know!

@LegoDude182 5 жыл бұрын

Miata, any generation should have came with a boosted option from factory

@FitmentIndustries 5 жыл бұрын

I feel the same about the S2000!

@joonaslaakkonen8096 5 жыл бұрын

Viper 2nd gen

@Flewkey1337 5 жыл бұрын

@@FitmentIndustries I'm going to put an RB20DET into Ford Sierra this summer 🤣🤣🤣 Sierra original hp is about 80hp. It probably will have +400hp when putting 1,4 bar (~20psi) boost too 😍 The project car can be checked in Instagram > teemu_0

@sebastianmorrison6114 5 жыл бұрын

I’m going to supercharge my ion 3 because it’s the naturally aspirated highest trim level and the only one above it was a Saturn ion redline which was a supercharged 2.0 lsj ecotec and mine is a 2.4 LE5 from 06 so it can handle the boost ima grab the supercharger kit from zzp

@JayVon_Ro 5 жыл бұрын

Mods needed to boost your car--- WOAH WOAH der guy. How aboot you fix your car first.

@Nick_Tank 5 жыл бұрын

Jay'Von Ro “HEY GUYS, CHRISFIX HERE!!”

@aoi89387 4 жыл бұрын

You forgot to say bud at the end ( assumimg this is a Canadian accent

@mrwisher1250 4 жыл бұрын

how did you type with a Canadian accent

@JayVon_Ro 4 жыл бұрын

@@mrwisher1250 Eyy bud I was born in Mini-sota. Dontya know aboot how its basically like a small Caanada with all our trees n what-nots.

@mrwisher1250 4 жыл бұрын

@@JayVon_Ro lmao imma hear that in my nightmares

@samr.1321 5 жыл бұрын

I usually do air first. Than fuel. Than electronics. Blow motor. Than internals.

@0hjaa3.06 5 жыл бұрын

Then type then instead of than.

@samr.1321 5 жыл бұрын

Sorry I a fob from faa east

@ruikazane5123 5 жыл бұрын

Yea dem crank, pistons and things like that. Yo can't blow 2JZ easy tho

@eriv4735 4 жыл бұрын

Internals should always be first in any serious build

@austinpaine6782 4 жыл бұрын

Only way to do it

@ruikazane5123 5 жыл бұрын

Typical rules: More compression--less boost Less compression--more boost Advanced rules: High compression and high boost--stronger crank, con-rod, pistons and good cylinder and head Not-so-high compression and ultra boost -- *COOLING* You're right. Cooling is the thing that is always overlooked. I would usually increase the waterpump flow by replacing the pump, or the pulley for more rotation. Add a larger or a second radiator, and use an oil cooler that uses coolant as the cooler. A dry sump is also a good idea!

@Chev_chevo 5 жыл бұрын

Just slap some V-tec stickers on the rear bumper to get the same result. Easy 100+ HP

@sjeffy5137 5 жыл бұрын

For the best results, though you’re gonna need some experience with a hot glue gun along with the necessary safety equipment, I just glue a Shelby badge on the side.

@FitmentIndustries 5 жыл бұрын

Love you guys! 😂😂😂

@Chev_chevo 5 жыл бұрын

@@FitmentIndustries 😂😭

@ghostwarhammer007 5 жыл бұрын

@@FitmentIndustries lol..., yeep .. big toys for BIG boyz

@Sub4CarClips 3 жыл бұрын

@@Chev_chevo lmao 😐

@HerrZenki 5 жыл бұрын

Mo' boos' Mo' powa' Mo' powa' bebe

@chrishernandez2490 4 жыл бұрын

Get out of here, James

@ez_v7076 4 жыл бұрын

Mo..Mo..Mo...Mo Powa Babeh🎶🎶

@94neuman 4 жыл бұрын

MOOO POWA BEBE

@Juhkwez 4 жыл бұрын

Zenki Akuma Mo powa babeh, mo powa babeh, mo powa babeh.

@insiditious6203 3 жыл бұрын

🍩

@swizzy6010 5 жыл бұрын

There’s this channel called Nunfancy who had a boosted 350z without a tune... I’m sure you can guess what happened.

@slizer452 5 жыл бұрын

>had a boosted 350z >HAD oof.

@Treaxvour 4 жыл бұрын

RIP 🙏

@judahweesner2651 4 жыл бұрын

350z go boom

@jafethgarcia4819 3 жыл бұрын

Right! Tunes are so underrated! they’re even good when you have a new car &/or have some bolt ons.

@mowflexthesubnegro1846 5 жыл бұрын

I did this to my 86 two years ago and paid $3900 for 150 more hp for install and tuning combined. But I also had a full catless 2.5 exhaust + oil cooler + boost guage and catch can for another $1700 with some of that being used.

@cursedracing8247 5 жыл бұрын

Damn my cousin needs to watch this, he thinks he can bolt a eBay turbo universal kit up to his charger and make like 600hp. And I've tried to explain to him that it's not that simple

@FitmentIndustries 5 жыл бұрын

Lol show him this video please! 😂

@mattevans1643 5 жыл бұрын

It is that simple. It can make 600hp, for about a second before it blows, but it made 600hp.

@eriv4735 4 жыл бұрын

I say let him spend the time and money and figure it out for himself 🤣😂

@thattayloredguy 4 жыл бұрын

🤣🤣🤣

@rushking19 4 жыл бұрын

Lmao I had to help attempt to install a turbo kit for someone like that I say attempt because they bought the wrong Ebay kit and me and my friend didn't want to have to cut it apart to make it fit lol,the guy got a turbo kit ment for a Honda civic for his interga so everything didn't match up he didn't have any injectors ,fuel pumps gauges or even a way to tune it lol so we said never mind

@alex-zr2by 5 жыл бұрын

I think we all know that stickers add a lot of horsepower

@crustys0cc 5 жыл бұрын

Shhhhhhh, don't tell them our secrets

@FitmentIndustries 5 жыл бұрын

Cheat codes 😂

@lntercooler 5 жыл бұрын

im watching this as if im even close to being able to boost my brz. hell i havent even gotten around to buying a decent set of wheels for the damn thing

@Twig2250 4 жыл бұрын

lil depressed hold off for 2021 the new gr 86 is said to have a 2.4 turbo engine for the new gen

@JoeIsCrazyWillman 4 жыл бұрын

You don’t need different wheels for boost, however, according to this guy, you do need a better set of rear axles....

@lilcholo2097 2 жыл бұрын

@@JoeIsCrazyWillman i feel like this video is pretty misleading, he’s only talking about high compression and high performance for the car when most don’t and can’t afford to make 1000+ hp drag monster but just want more fun from their car. He’s right on the part that most parts should be upgraded but most cars especially na muscle/ sport cars can handle 500 ho on almost stock internals usually just have a air and fuel upgrade but that’s really it

@jordancerace9310 4 жыл бұрын

“Stock ones are made of F**king GLASS!” Laughed my ass off 😂😂

@MidnightClubStillCancelledSoz 5 жыл бұрын

"I need NOS."

@pewpew-_-2157 5 жыл бұрын

I seen you on blackpanthass vid

@joedenhardt4604 5 жыл бұрын

Wal-Mart sells them 9.99 for 8 😂

@ruikazane5123 5 жыл бұрын

"Speed and NOS are the same thing."

@rollthelosingdice 5 жыл бұрын

My car only goes 140...

@eriv4735 4 жыл бұрын

Kevin H. Nitrous has to be refilled quite often making the overall price far exceed that of a turbo or Supercharger..not to mention the actual kit itself plus supporting mods and tune..clearly you don’t race or build cars..

@EduardoReyes-up6zo 5 жыл бұрын

The fact that every time I get more info on turbos I notice how much more research I actually need to do on it is killing me 😂 I miss jasper btw :/

@edward1937 5 жыл бұрын

A cool engine is a cool car. That’s all I learned.

@JustSolarize 5 жыл бұрын

i want to put bags on my car, so a “so you want bags” video would be really helpful 😭😭

@zachr21897 5 жыл бұрын

Biggest and most important thing before you even start the upgrades to get your car ready to boost is too know what you want to achieve, have a general idea of the power you want to make and how far you want to push your car. It's a lot easier knowing what specific mods you need when you have a clear set power goal, could even save you money potentially cause it prevents you from going out and buying stuff that either is overqualified or just not needed

@rushking19 4 жыл бұрын

I've been working on turbocharging my v6 tiburon turbo kit is all custom have dc headers and custom fitted to a atp that is supposed to bolt to the stock catted manifolds but got it to sit these after market headers ,also got a megasquirt ecu to run it with a load of other things I still have to get a lot more now like lsd ,clutch ,injectors and gauges and other things but I'm getting there and like I say to everyone who ask me research is key ,this video has everything I always tell people and what people need to know when boosting a car

@zaydoesninjayt7022 3 жыл бұрын

I have a v6 07 tib. I’m hoping to boost it by next summer. Do you know how much boost the stock internals can handle? If not, which ones should get upgraded first

@pontiacmaniac7772 5 жыл бұрын

I’m getting forged internals before I boost my car. Why run the risk of kaboom.

@CuttinChris 5 жыл бұрын

I know alot of folks with stock internals running high compression with boost. It's all about fuel and heat control to keep it from killing itself lol

@swizzy6010 5 жыл бұрын

Better safe than sorry

@CuttinChris 5 жыл бұрын

@@swizzy6010 yep that's true. If you're broke and cant afford a rebuild or new block you can get away with it but that's one reason I have mine at 8.5:1 compression. Not too sluggish when off boost

@rushking19 4 жыл бұрын

I'm running on stock internals and plan on pushing it hard because if it blows it blows I can get a engine for this thing for like 250 at the junkyard and have it in in a weekend

@luisromo9722 3 жыл бұрын

I have a 1.6 Miata can’t wait til the kaboom

@NocturnalDistortion 2 жыл бұрын

Great video, currently in the process of getting my 300C (5.7 Hemi, rwd) ready for a set of twins, excellent list to start with. Going in to have the body kit molded, and have 3 inch header back exhaust fabricated within the next month. Long way to go yet, planning on installing forged internals before I even think about boost.

@FitmentIndustries 2 жыл бұрын

Keep us updated! Sounds wild. -Edgar

@freedomswitch 5 жыл бұрын

Very informative. Planning to boost the G20 down the road. Probably gonna go with swapping in a Bluebird or a W11 Avenir. I’ll have to manual swap the Avenir if I go that route though... they only came in an auto from what I have seen :( Looking at a T25 dual ball bearing turbo.

@zachward6441 5 жыл бұрын

Thank you! Real car education us what we need

@FitmentIndustries 5 жыл бұрын

Thank you!! Glad to hear you found this informational that's what we aim for! 🤘

@connerhendrickson8418 5 жыл бұрын

Working on building my 2.0l neon. However the tune for it might be to much and I might be selling it to get a srt4

@DankBoyy00 5 жыл бұрын

This is for the people who want to do it for cheap, the eBay turbos are decent... but JESUS CHRIST! Don't buy the kits with all the tubing and stuff, just get the turbo alone That is all, thank you

@munin9530 5 жыл бұрын

just wanna know, can i bolt on a turbo and be done with it? the only experience i have on engines is v12 swapping on forza

@DankBoyy00 5 жыл бұрын

@@munin9530 No

@munin9530 5 жыл бұрын

@@DankBoyy00 thanks

@CuttinChris 5 жыл бұрын

Trueish. I got my front mount piping generic kit off Ebay, had to cut a few pieces but everything fit up nice. Replaced the crappy t clamps they come with though

@DankBoyy00 5 жыл бұрын

@@munin9530 You're welcome

@CuttinChris 5 жыл бұрын

Boosted my ej251 with 250k on it. Fmic, fuel regulator, voltage clamp, 3" downpipe 2" up, Walbro 255, stock injectors. Had a boost spike and took a 1inch chunk out of my #4 piston. Tossed a wrx 255 shortblock under my sohc heads and it's been all gravy on the stock n/a ecu still. But swapping to my standalone soon. Probably the easiest turbo conversion I've done.

@OTBspeed6 5 жыл бұрын

Vroom vroom. Couple videos of my na+t legacy gt here. Still slow but much faster than it was na!

@rex_s80 5 жыл бұрын

Lol meanwhile 850 owners get away with adding a turbo on a stock tune because Volvo. Sure you can’t run a lot of boost, but it works well and doesn’t actually run poorly at all. The NA motors have a really forgiving tune that adjusts a lot. You can usually port and change the exhaust and it will adjust accordingly. Sadly not many people try to keep them NA. Later NA engines could not take the boost without a tune as those had high compression. To the extent of my knowledge. I plan for all motor build and probably do a ecu flash tune.

@jessepagenkopf3653 5 жыл бұрын

Congrats on 200k

@MassiveLoop 5 жыл бұрын

Always wanted to do the VRT kit for my MK3 GTI VR6 but those were frequent ramen days just keeping power NA. These days it feels better to start with a OE boosted engine. I'm running a MK6 GTI (TSI) and looking to do a K04 swap with S4 IC with new piping perhaps.

@OctaneStreet 4 жыл бұрын

sound fx on fleek 👌

@coyhunsucker1386 4 жыл бұрын

4 inch hood exit best exhaust flow and of course the flames are cool too

@zackbennett545 2 жыл бұрын

I'm looking to procharging my truck (2015 ram 2500 6.4) but I don't know where to start because it's my daily but I found out with the kit I have picked out it can handle 6 pounds at most but I'm learning on what I can do to make more boost and not blow the motor.

@curtaugust4174 5 жыл бұрын

These sound effects crack me up every time

@82toyotalandcruiser 4 жыл бұрын

I took a 91 NA 4g63 galant and did my homework to install a stock size turbo set up from a 4g63t. She ran great for a few year and even tho she had good compression, ultimately the blow by was so extremely on a cold winter day my catch can froze and blew out every seal in the engine. She would push out 2lds of oil a week killing my alternator. The rest of the car was soo rusty that it's now time to close that chapter and move on me new 2014 ralliart. I will say your 100% right DO YOUR HOMEWORK when it comes to mods. Only cause I did mine was I able to get 10psi on stock engine for 3yr no problems

@2JZLS 3 жыл бұрын

Id turbo a $3k reg-cab 2500hd. Cheap, huge potential, already have a 4l80e, same weight as a 2010 Camaro with 2 passengers. 8k turbo kit is 950hp s475 t6, t51r’d & coated. 14k twin turbo kit is up to 1482.7hp at 28 psi stock bottom end. Only stock bottom end i’ve ever seen as strong as that is a 12 valve cummins. You could argue LS7 but they have branded pistons rods etc.

@eltonjohnkyeremeh5191 4 жыл бұрын

Any suggestions on how to get more horse power for my 2018 Toyota chr ,body kits suggestions, & best coils &tires

@JustinCFC 5 жыл бұрын

Smart Plugs lol got ya Gels!!

@austink6448 5 жыл бұрын

My 1995 mustang seems like it's gonna be a pain in the ass now to modify when I plan to do it

@eriv4735 4 жыл бұрын

There is nothing difficult about modifying an sn95 mustang..they have one of the largest network for parts especially with a pushrod 5.0..it’s cake lol

@Manoah. 3 жыл бұрын

But, if I want to boost the car I am going to buy (European Eclipse GS, so with the N/A 4G63) does that mean I have to upgrade all those things aswell when it gets boosted? I am not entirely sure if they have the same for example cooling system as the GST and GSX.

@youngforever0511 5 жыл бұрын

I know everybody loves Alex but other Alex is pretty cool too. Great vid

@wottle-b335 5 жыл бұрын

Hey so uhh...how about a 2008 3.0 Ford Escape? I mean the Noble M400 uses the same engine and those come twin turboed, but I can’t find anything at all to purchase.

@Lilmiddwest 5 жыл бұрын

Turbo my 05 hyundai tiburon gt 5 speed. Hard part is try to find someone to tune your standalone ecu. I notice a lot people don't do any research how to turbo their car/truck.

@chandlerlaruex 5 жыл бұрын

HELL YEA BRO I GOT A 5 SPD GT TIB TOO

@BerryFluffyHusky 4 жыл бұрын

Ha, you guys with your ecus, I got a blown 1972 mustang with the 351 Cleveland, all I have to do is spin 4 screws to adjust my fuel air ratio on my blower.

@bukharimaunda179 4 жыл бұрын

I want to boost my xpander glx manual 2019.. wat should i do? Any advys?

@DallasCS2 5 жыл бұрын

I’m planning on boosting my ‘15 Focus hatch. I coulda bought an ST but I want to stand out and I like the sleeper look.

@marknaidoo5819 4 жыл бұрын

It can be done!

@user-di8kp8ln9w 3 жыл бұрын

that was a nice video thank u

@amadorogel8586 5 жыл бұрын

... yeah I’m not boosting my car lmaooo

@frod116 3 жыл бұрын

You guys have one of these videos for tuning a stock turbo car?

@orlandorivera6617 2 жыл бұрын

If I up grade my fuel pump, injectors, rails, cams, calipers for braking power, exhaust & cold air intake…can I add a turbo/supercharger!?.. Do I have modify my pistons exc…..?..

@SpartanRacing1989 4 жыл бұрын

I am in process of boosting my First Gen tC and I do plan on Upgrading all of these. However, I have to wait on a lot og tgid stuff becaise you know...life....money...family....time. lol. Its just stupid hard to buy these thing for some people.

@brunolang210 4 жыл бұрын

Do i need a better radiator if im pushing 350 horses on a turbocharged gt86

@kevinwiltshire2217 5 жыл бұрын

Who makes those rims? Best rim for the supra

@saby8765 5 жыл бұрын

Common stop pickin on Dakota...we all broke something when we yanked it for the first time. I still have broken plastic parts in my garage and I don't actually know what broke when I yanked my bumper cover...

@DanielSantos-of1id 4 жыл бұрын

What are the gold/yellow rims in the bottom right?

@santosdelafuente7175 4 жыл бұрын

So basicslly add the turbo or supercharger last?

@justinb1536 3 жыл бұрын

If you are runing anymore then 5 lbs of boost you need to gap the rings. if you can when running a turbo cool the oil going in the turbo and out for a reliable daily driver included a oil suction pump for the radiator add some ducting to help with cooling and fans on the oil cooler's for the turbo

@MrNdfs 5 жыл бұрын

I want to boost my dad's fiat multipla diesel now

@nicolapalmieri7344 4 жыл бұрын

Isn't the Multijet diesel engine already Turbo Diesel?

@yoaiou 5 жыл бұрын

Wait 3 inch tips or the whole pipe?

@tiskilwaindian 3 жыл бұрын

I’m looking for a supercharger for my 2019 Buick Regal GS 3.6 LGX. Something easy, 8-10 lb of boost

@melsantiago1841 4 жыл бұрын

thanks, just boosted my prius

@brandonvanderveen1332 5 жыл бұрын

So what I’m hearing is.... you need to replace just about everything on your car to put a turbo or supercharger in. Lol, just kidding. I thought this video was great and really made me realize how much goes in to boosting a car

@UpperRobin29 5 жыл бұрын

This video will save a lot of motors

@justinb1536 4 жыл бұрын

I have a 1996 to nobody's ever touched for moding so there no aftermarket engine parts (only suspension).my buld is all custom fabricated it is a good way to learn new skills it is a twin turbo 3.5 bord 30 over and pushing 700hp and 600+ tq the best sleeper nobody even looks twice just the way I like it and when I race I never get pulled over it is always the flashy car

@RussianZOmBieATTACK 5 жыл бұрын

Boosting 2jz-ge, is that a good idea? Got an N/A 2jz toyota mark 2 recently

@blu3flare25 5 жыл бұрын

If its a 2jz-ge NON VVTI. It should be able too handle 8psi no problem with a good tune.

@deltacx1059 4 жыл бұрын

What about a early 90s Buick Roadmaster or a 1997 GMC Sierra 1500 with the 5.7 v8?

@daltonmohr9327 5 жыл бұрын

Anyone know where to get a turbo kit for the mazda2 I have a 2012 Mazda2 I want to turbo but cant find any kits for them

@earlgray7920 5 жыл бұрын

www.knightsports.co.jp/ check here

@trisatnwashere 5 жыл бұрын

Copped me 2 shirt for the my 350z my girl love the pink.

@FitmentIndustries 5 жыл бұрын

AYEEEE!!!! We see you!!!! Thank you for the support man!

@skizzie6923 5 жыл бұрын

Process my order ☺️ thanks... I kind you guys tho for real

@FitmentIndustries 5 жыл бұрын

Thanks for the support!!! Can't wait to see your ride on our gallery sometime! www.fitmentindustries.com/add-wheel-offset

@t.kickstartbun1e797 5 жыл бұрын

Going to be buolding a 1994 honda civic dx 1.5lb7 (non vtec) supercharging it

@cristianescalera5832 4 жыл бұрын

can anyone help?? I have some questions...I have a 2011 370z that i want to turbo and I honestly don't know what to do first... Maintenance is all good and just got a stage 2 clutch but whats next? fuel pump? upgrade radiator? someone help please and thank you

@chrism340i 5 жыл бұрын

What if I hook up an air compressor to my intake and set the regulator to 90psi and full send!!!

@FitmentIndustries 5 жыл бұрын

💥😂

@kingstyle7314 5 жыл бұрын

I have a 2000 4.2 v6 f150 and I can’t find any info on a turbo kit for it no one that I can tell has done it but I want to where do I go from here?

@FitmentIndustries 5 жыл бұрын

Possibly a subreddit? Otherwise it is a possibility that our brother company Custom Offsets might have something one their KZfaq that might help!

@kingstyle7314 5 жыл бұрын

Fitment Industries I took a look at the other channel they cover lifted trucks I’m trying to do a lowered street truck with a turbo v6 just to confuse people who see the lightning front end and then hear a v6 then a bov

@joedenhardt4604 5 жыл бұрын

Step 1 cold air intake and Cat back exhaust (does alot more than u think)

@kettlemypedals 4 жыл бұрын

What if I bought a boosted car and I want to install a bigger turbo kit?

@2jzxjv848 4 жыл бұрын

Getting ready to boost my is300 👋🏽

@timothygarrett8077 5 жыл бұрын

Boosted Boiz!!!! Go Kyle!!!

@ANiSoBeast 5 жыл бұрын

What about a idrive ?

@arjundargula9355 5 жыл бұрын

I love these instructional videos from u guys I’ve been trying to find things like this forever thanks firmest industries -a long time sub

@FitmentIndustries 5 жыл бұрын

Glad to hear that you found this informational, Thank you again for the support! 🙌

@johnathanthornton7256 5 жыл бұрын

How long until FI is the new CarID? Would love to buy all the other accessory shit here.

@FitmentIndustries 5 жыл бұрын

SOOOON BROTHER!! 🤞🏼

@F87_jey 5 жыл бұрын

Needs more boost

@mr.ytramos3503 5 жыл бұрын

Is a tune needed even at 5 psi with upgraded fuel pump and injectors

@gstpierre69 5 жыл бұрын

MR.YTRAMOS Yup, especially since the new due pump and injectors now have different constants than the factory ones.

@mattevans1643 5 жыл бұрын

Yes, you will always need to tune it, even if you are running 1psi. You are changing how the engine works, even the slightest bit puts too much stress on the engine. At that low you probably won't blow it, but after a while things will start happening, and you'll need a new engine. The biggest one is probably your internals. They are designed to work in a specific way, and if you change anything about them, you are throwing off their balance. They were built for a specific ratio, and changing that changes how hard they have to work. And if you know anything about physics, objects like to maintain their equilibrium. And adding boost to a N/A engine throws everything off. So alway get it tuned, so it alleviates some of the stress. You're best bet is to replace the internals with stronger ones as well, because depending on what materials were used for the internals has a huge impact on whether they break under boost, which is not a good time.

@SBE_Senju 4 жыл бұрын

are automatics worth boosting? i’m kinda new to the car scene and i’m trying my best to research so i won’t be called a ricer any tips?

@zaydoesninjayt7022 3 жыл бұрын

Year late but I wouldn’t worry about it. Personally, manuals are more fun but just do what you want

@EbolaSquirrel 4 жыл бұрын

Wait what are brakes for again?

@trulyboosted1264 5 жыл бұрын

Upgrade internals?? Never heard of it🤔 Stock internals all the way😈

@isaiahrios2244 4 жыл бұрын

Anyone know how to boost a scion xb

@manuelgutierrez1557 3 жыл бұрын

What car model is in the thumb nail?

@daltonmohr9327 5 жыл бұрын

Maybe you guys can make a video about what it would take to turbo and Mazda2 😂

@adamhayden5152 2 жыл бұрын

The biggest thing you need to do before you think about adding boost is making sure your stock internals can handle it. If you don’t have some forged parts at least crank and rods your prob not gonna have a good time.

@FitmentIndustries 2 жыл бұрын

👏👏👏 good knowledge to have for everyone! -Edgar

@adamhayden5152 2 жыл бұрын

@@FitmentIndustries thanks homie!

@rafaelrodriguez172 4 жыл бұрын

Wtf was that never seen a stang with a engine on the back what!!!!! That’s so cool

@kolinmartz 5 жыл бұрын

If you want a fast car that leaks oil everywhere, you might as well just get an exotic.

@Prestiged_peck 4 жыл бұрын

We blew a 351 Cleveland in a 68 2+2 once, it's a lot easier when you don't have a carburetor in the way

@gingersquatch9844 2 жыл бұрын

I'm going to go as far as cerakoting my combustion chambers in order to attempt to control the additional heat produced from turbo charging my 97 Honda Civic.

@Deiphobuzz 4 жыл бұрын

Lowering the compression is way more important unless you like getting e85 all the time..

@rushking19 4 жыл бұрын

Not always true it all depends on how much boost your running and the timing also

@antofrancisco9435 5 жыл бұрын

Has anyone boosted a rev up 350z?

@jrc5001 5 жыл бұрын

Judge me if you will but a Prius. I know but think about it...Ls Swap some beefy tires fresh wheels , Coilovers. Make it an Ultra Sleeper. Geebus Hate me if you will but it has been done