Really did a great job on the review man! Been looking around for a thourough and detailed review on this chassis for a while now and you sealed the deal for me!

Thank you so much for this great review! I've been waiting for a while now and you delivered!

Nice review...logically laid out pros and cons...very well done...thanks for taking the time to put this together...

Just bought this chassis for my rem 700 in 300 blk. Can't wait to try it out!!!

I've put my Savage 10T into the LSS XL Gen 2 chassis along with their rifle stock & a Timney trigger. Love these guys gear.

I've had mine for some time and it's a great chassis... could not be more happy with it.

Watched the video....now ordering the system....great review

thought about getting one of these till i seen the xlr element! love it!!

This is a great review, thanks! I'm probably going to go this route for my Savage 10 FCP. One question: Is that the mil-spec buffer tube or the commercial version?

The Olive Drab option is only by special order and adds an extra $20 and 2 weeks to the cost. I was qouted 4 weeks but it arrived in 2. It is beautiful and very functional. I also bought the long top rail. Now I am going through some things trying to find the right height Vortex scope rings. Why Vortex? That's because you must coordinate (my riflescope is a Viper PST 6-24x50 FFP).

John, I wonder if some grip tape in that area in front of the mag well would help it "grip" on a slick barricade? Might want to try that and see how it works. Thanks for the great reviews!!

Nice review. I love mine with a Tikka action in it. Did you try their rail with qd sling mount? And would you say that i could fit their recoil pad to my MFT BUS stock?

What scope, ring, and base set up are you using in this video? I'm gettin a Remington 700 AAC-sd in .308 soon and would like that setup. Love the vids!

Hey brother, will you be doing a review on the MDT LSS XL version?

Great review. I recently purchased this chassis, I am undecided about keeping it, because of price and stability with the adjustable stock. What is your opinion on this chassis after time?

Super review. It would have nice to have had a weight for that system there just as an example. It gives us an option here in the UK if you don't want a straight pull AR.

How does the trigger reach on this chassis compare with other ones you have used? I am using the Bell and Carlson M40 style stock you featured on your "Budget Precision" build, and while the LOP is fine, the reach to the trigger from the pistol grip is further than I find comfortable. Can you recommend any other stock/chassis system with a shorter reach to the trigger?

Thanks for the alternative and more affordable stock suggestion!

Did you ever review the adjustable butt pad?

Orded the Gen 2 in 17 HMR - Absolutely beautiful and worth every cent.

2021 and thank you!

Hey john. Great review. Answers all questions but one. For the MDT do they make a hand rail assembly that fits this system??? In one of the trailers you have it looks like there is one that comes with it. Which is that? Be awesome to hear back from you. Your very knowledgable and thanks for all the helpful information. Thanks Hope to hear from you. In process of changing out the stock on my 700 308 rifle.

You mentioned its a 40mm scope but I'm curious what scope is it exactly? And what kind of groupings? Thanks and great review!

Really good review!

That recoil pad looks like the one for the PRS stock on the MDT website, is that the recoil pad used in this video? It seems to be the PRS pad, not the CTR pad.

Dose Mdt sell chassis kits with stocks grip ? (All on one)

I've been thinking about getting into long range shooting , I have a military surplus 30.06 with a mouser action , I plan to get a new barrel through Proof research . what chassis system would you recommend ? this currently has a box mag. and want to go with a detachable mag.

Another option on that pistol drip issue is cutting off the dovetail. I wanted to use my Mako AGR-43, so I cut it off - straight across to remove the dovetail with a dremel, unless you have a band saw. But it works and looks great. No problem.

Great video how does this compare to oryx chassis?

I have the LSS on my Savage 10 FCP. Easy drop in, very please. After having the Magpul stock, I chose the MDT stock because it's more of a sturdy stock.

Have you had a chance to use the Huber 2-stage trigger? Huber Concepts

I just got the LSS chassis for a Savage Axis .308 Winchester/ 7.62x51 NATO, with a Fab Defence shock absorbing adjustable but stock and the Magpul MOE + grip and a Harris bipod. Topped with a ffp 4-16x50

At 2:23, how did you get the rails on the flat sides of the forend? Did you drill and thread that area?

Very cool stock system thanx for sharing!

Quick question I just got a McMillian A5 installed and bedded to my rifle. I went out the other day shooting and had a hard time because my face kept slipping off the riser from the sweat. Would mole skin be a good solution? what would you recommend? Nice video as always

is it available for a Savage axis 2 xp?

Have you had the chance to look at their Tac21 chassis? It looks like the safety is hard to use when installed. Is this true

did this add or subtract from the original stocks weight? does it actually save any weight after a buttstock gets put on?

Glad you finally posted a review! I was going crazy :) Did it change the accuracy from the other stock you had mounted on that action? Hope all is well John.

Mdt now offers a barricade stop attachment that will take care of all the barricade issues you stated. I know this is 7 years later but figured I'd mention it.

Does the chassis support free floating barrels? For instance the mossberg .308 patriot.

Awsome chassis system,John i shot my first F class last Sunday.And i have to say with a factory 700 Action,Bell & Carlson A-2 stock,Timney tigger and Atlas bipod with a 26" barrel chambered in 243 i shot almost as good as some guys with 2-5 thousand dollar rifles.Most of my builds, And all 3 caliber fifles i own now shoot half MOA or better.Thanks for your knowledge,time,and sharing your thoughts i shot a 514-7-X at mid range 600 yrd.Thanks for the vids,By the way any more reloading videos in the future?

Lss vs xlr carbon chassis, which do you prefer?

Do they still not come with a magazine?

Hey, whats up with the night vision hood? standard hood is very tiny and if you have scope mounted at the front part of the rail, then there isnt enough space to mound the night vision... theres the xl version but also its littlebit to short... can you talk about that also? or recommend solutions for that problem... moving the scope also dont help... Taavi T.

Are you able to use the magpul mags with this chassis?

How does the MDT LSS compare to the KRG X-Ray? The price ends up being about the same, the weight is very close with buttstock and pistol grip. What are the pros and cons to each?

I'm thinking about building a ruger American mountain gun. Any recommendations???

👍🏼 I got a SPS Remington.308 with a 16.5 barrel, adding a hinge down the road .....

Good review. I have been waiting for it, and hating it at the same time. Been thinking of buying this chassis for my rem 700 varmint and now this makes me want it even more, just to get rid of the cheap stock which throws my shots around with the bipod attached. Curse you.

Are they offer in L/H , S/A 700 Remington?

The LSS chassis accepts "MTU" contour barrel?

Where did you get that camo skull?

Great video! I found that the Accurate AICS compatible mags were a good cost effective option. I believe I got my 10 round .308 for around $70

I noticed that the stock mounts farther behind the pistol grip than some other chassis systems. Would you anticipate any problems for smaller stature shooters (women) who need shorter lengths of pull? I was concerned that if a folding stock adapter was added a 5'2" shooter (my wife) would not be able to collapse the butt stock enough for their short LOP. Could you publish LOP data?

Hi, May i have the stockbutt model # and all accessory on it? Thank you

What do you think of the Tac21. I have narrowed it down to the Xray/180 alpha (depending on R700 or Savage 10) and the Tac 21.

Good review! But you know what I would really like to see that I rarely see on the net? Do a vid where you start with a off the shelf gun such as a Savage 10 FP in 308 and what it does at the range group wise. Then drop it in a chassis that you review and show the improvement in consistency that you achieved down range with the groups. That would make for a much more impressive and informative video in my humble opinion. As a shooter....I wanna see what I am getting for my efforts and if its really worth the bang for the buck. Surely in your collection you have a rifle you started bone stock with, then added a trigger, then added a stock or chassis, then added a barrel to, that you documented the build over time, and then show the results each step in the build improved the rifles capability. Just a suggestion...

Did mossberg just license this chassis and changed over to magpul mags?

what if you placed a strip of Velcro on the front to get the grip needed? (hooks not the loops)

what kind of a bipod was that?

What stock are you using?

Do you find that this chassis is too light weight (effecting stability) for long range? Im torn between going with this or a traditional stock like the Manners MCS-T.

Glad you got that one out. It is an interesting system. Which reminds me, did I miss the KRG x-ray review, or is that one still coming?

Thanks for this review. I think this chassis might be a good option for me since my wife wants to shoot with me and we have over 1 ft difference in height between us. Chassis that support as much change to length of pull as this one are not so common.

Did you use just a basic carbine buffer tube? Love the info you give keep up the good work man.

At the 2:25 mark of the video. You have a picatinny rail mounted to side of the LSS chassis. How did you mount that rail?

Is the barrel free floated by just dropping it in the chassis?

Does this not use ar10 pmags ?

Well after watching your review, I've decided to go with the new Mossberg mvp lc.

Not really for me but an excellent review none the less. I'm definitely looking forward to the review of the buttpad.

Going to buy one when I buy a Savage Axis 7mm08. Need a better hunting rifle.

you see the Weatherby Vanguard Modular Chassis Bolt Action Rifle 6.5 Creedmoor

will the LSS chassis fit my Remington 700 VTR 308 with its Unique barrel thanks for your time

morning boss I am from India one question is here how much that price in Indian rupees what about clip possible to give the answer have a great day.

I have a SPS Tactical .308 and have wanted to put the action into the LSS Chassis. In your opinion, what is the biggest take away of the chassis system versus a Houge over mode system?

Sorry if I missed it, but what is the weight penalty over a Hogue over moulded?

mossberg has the MVP LC in 7.62 uses FAL, Pmag, AR_10 and mossberg mags at a fraction of the price. the Pmags are the dealbreaker when your using a LR308 and the mags are the same. MVP varment, predator. their flex MVP uses a stock system copmpatable with all their flex shotguns. quick changes, and you an use a shotgun stock for range shooting with a recoil pad. I have the M4 collapsable stock on my MVP flex 7.62, and the stocks are about 50 on ebay.

I have the savage arms 10 fcp-k rifle which has a bolt release just in front of the trigger on a accustock. If i got this chassis how would i be able to release my bolt for cleaning if someone could help please.

They just came out with one of these for my Savage Axis and I've been looking at getting one for awhile. Totally on my buy list for my tax return aka "gun money".

Thanks! I have been waiting for this review! How would you compare it with the XLR element chassis? it seems that they are about in the same price range (once you add the stock to the LSS), but I can't seem to find any stats on the weight of the element. Thanks again! Love your videos!

Does the LSS chassis take commercial or mill spec ARstock? Thanks

will this chasis work on a savage 10tr with the bolt release by the trigger guard?

Might do this with my 270

Think it would work with the remington 700 VTR with the triangle barrel?

Does the lss fit the 450 bushmaster ruger

I have a Rugar American 30.06 do they make a loss chassis for it.

Does the Magpul PRS stock suffer with the same issues as the Magpul MBR stock ?

Will this fit a Savage Axis 308?

i would love to see a Mcree chassis review!

How much did it cost you to build that hole system together??

What height cheek riser are you using?

Falcon still going well John?

It's also 399$ Canadian $s.if you know a buddy in Canada, get him to buy you one. Then come pick it up. Will save you about a 100$

Will this chassis fit an M40 barrel contour?

Hmmmm. Mossberg MVP lc looks identical? What's going on with that? I'm glad I went Mossberg though only because I can use 25rd pmags and it comes with a silencerco saker brake and does what it days it prints 1 moa at 100

By the time you add stock/grip/mag.. you might as well buy a Savage Stealth. Less than $900 and you get a factory blue printed Savage 10 action.

Anyone got one for sale

What kinda Micky Mouse shit is this!!!!!!!! Get it, the shirt... :) Seriously, great video.

What butt stock is that?