Going to buy that servo. Especially knowing Raz is involved

I wanted to know the actual specs on that servo anyway you can help out with that.

@@fattymoore8889 yes. Click on the link above. There's a full description of the exact specs 🤗

@@richduperbash2966 the link above takes you to Amazon and has some specs but I'm looking for the speed and torque ratings at the different operating voltages

@@fattymoore8889 sorry, not sure why the speed/torque at all voltages wasn't listed in the description 🤔. 6 volts: true speed (30°/60°) 0.068/0.136), peak torque 42kg, 583oz 7.4 volts: 0.056/0.113, 48kg/687oz 8.4 volts: 0.048/0.097, 56kg/778oz Rated amps (stalled) 4.2, 4.8, 5.5.

Thanks so much Brother 😜. Love the FT 6s with this setup!!! Really appreciate it my friend 🍻😎💪👊👊

Indeed Kimberly 😍. I almost forgot to mention your saver because it works so good.... literally set it and forget it 🥰🥰. Raz's servo looks awesome with your mount too 🤗. Thanks so much for all your incredible upgrades!!!! 😘😘😎💪👊👊

Thanks so very much Raz 🤗. Loving this Monster PP servo!!! Killer speed, power, and precise control 👌. Truly appreciate the kind words Brother. 🍻🚀🚀😎💪👊👊

Thanks Brother Aaron 😜. The Fireteam is so dang FUN!!! Loving the power and precise steering with this Monster PP servo. 🍻🚀🚀😎💪👊👊

Thanks so much Brother 🤗. Who knows, maybe the same manufacturer 🤔. I'm super impressed with the speed and torque!!!! Very precise control. 🍻😎💪👊👊

Thanks so much Robert 🤗. Truly appreciate it Brother!!! 🍻😎💪👊👊

Thanks so much Brother Chris 😜!!!! I could've swapped my arm, but the sun was setting and I already had my fill at the urban spot 😍. Loving this PP Monster servo!!! Definitely passed the durability test. The power is wicked even on 6V. Definitely ramping it up next run. The group bash was awesome FUN 😁. The Truggified XL just screams. Days are getting shorter, but we had a blast laughing our asses off 😂🤙🤙😎💪👊👊

Thanks so very much Chad 🤗. Definitely had a Blast with the FT at both spots 😍. The upgrades have worked Killer and the big power and wide stance have turned her into a terrain Beast!!! The stock chassis has held, but it wants to bend downwards in the rear and puts more strain on the braces and connection points. The truck will run more planted with M2C 😍. Strength aside, the extra 100g down low makes a big difference in CG and overall handling. 🍻😎💪👊👊

Thanks Robert 🤗. Another nice thing is the electronics run cooler with all the air flow. 🍻😎💪👊👊

Thanks so very much dear Brother 😍. LOVE the FT 6s with big power and wider stance. So plush with the ZRS bladderless set-up 🥰🥰. The PP servo is killer even on only 6V. Mega ramp is so FUN 😱🚀🚀. The Truggified Typhon XL was getting it done too. 👍👍😎💪👊👊

Thanks so very much Claire 🤗. Bashing the Fireteam is about as fun as it gets for me 😍. Have to get her out more often. 🍻😎💪👊👊

Thanks so much Brother Clarence 😜!!! You'll definitely LOVE this ripper 😍. Don't forget to shift the battery tray to the rearward position on the chassis. It goes back about 2" and drastically improves the handling and overall balance. Helps her jump nice and level 👌👌😎💪👊👊

Thanks so much for the feedback Brother 🤗. Stoked to hear good things about this PP Servo. Definitely impressed so far. 😎💪👊👊

Thank you Brother 🤗

Thanks so very much Brother 😜. Truly appreciate it. 🍻😎💪👊👊

Thanks so much Brother 🤗. LOVE this versatile Ripper!!!🍻😎💪👊👊

Thanks so much John 🤗. I absolutely LOVE the Fireteam 😍. The handling and raw fun factor is off the hook. Suspension is so plush and she just tumbles right back to her wheels 😂. Raz definitely has me sold on this PP 56kg. Killer control and power for days even on 6V 👀. Truly appreciate it Brother!!! 🍻😎💪👊👊

That's awesome Brother 😱!!!! Love your idea too. A caged 1/5 Fireteam would be so SICK 👀. Probably be tough as heck too. 🍻😎💪👊👊

Thanks so very much Brother 🤗

Thanks so very much Nick 😜!!! The Fireteam was a dream come true for me personally.... 1/7th K6s XL concept plus a caged body 😱. I'd been hoping for both for years!!! Such a versatile and FUN platform 😍. Using the smaller ramps for a boost on existing jumps works awesome Brother. So long as they're built sturdy, they'll handle both 6 and 8s rigs. 🍻😎💪👊👊

Thanks Jon 🤗. It's definitely my favorite RTR 😍. The fun factor and laughs are like no other 😂. Haven't had her out much recently because of parts testing with the Sledge and other rigs. The Truggified Typhon is still my all-time favorite RC 🚀🚀

Thanks so very much Brother 🤗. Truly appreciate the kind words. Happy bashing!!! 🍻😎💪👊👊

So awesome to hear Brother 🍻

Thanks so much Brother Avery 😜. Felt so awesome to get the FT back out 😍. The fun factor is off the charts 😂. Can't wait to get the chassis swapped for proper M2C Beef!!! 🍻🚀🚀😎💪👊👊

Thanks so much for the kind words Dhon 🤗. Had such an awesome time out there 😍. The group session was filled with laughs of course 😱😂😎💪👊👊

Thanks so very much Ervin 😜!!!! The Fireteam is SO much more raw fun than the Sludge 🤣. I'd pick the Fireteam over it any day. Bone stock it'll take more beating. Doesn't have a flawed motor mount design or pot metal gears 😝. Yes the Sludge has incredibly strong hubs and arms, but it's super overpriced IMO. Of coarse you can purchase their hardened steel gears for another 100$ 😂. Had a Blast out their with the gang as always 🚀🚀. Really appreciate it Brother!!!! 🍻😎💪👊👊

Thanks Rob 🤗. Yeah the O-ring style pistons and bladderless caps are so plush 😍

Thanks so much Brother 😜!!! Dust trails for days with all the heat we've had this summer. 🍻😎💪👊👊

Thanks so much Brother 😜. Such a FUN and versatile rig 😍. Love the cage, the stance, and Killer overall handling!!! She's crazy durable and fly's awesome with the right setup 🍻😎💪👊👊

It's a BEAST 😱. I didn't know what I've seen missing 😂

Thanks so much Brother 🤗. I got several requests to keep the chassis stock for awhile which I've definitely done 😂. It's like old days (before M2C) just straighten the stocker periodically as needed. Definitely gets old. The chassis is like the foundation of a house. Everything above it is safer with a solid base 💪. Definitely swapping her out. The 4mm connectors can definitely been a pain sometimes. It's best to clock the motor face plate so the wires and connectors sit directly above the motor and get zip tied on a cushion for impacts when possible. Thomas P with tppartsrcxtreme made me a believer of this practice 😍. I haven't tried the G2 2250kv, but think it's probably best on a Typhon or lighter set-up. The heavier 1/8 rigs do best between around 1500-2000kv to afford better gearing options with less heat issues. They're simply more efficient and capable of producing more torque. If I try the G2, it'll be on a buggy or one of my road rigs. 🍻😎💪👊👊

Thanks so much Brother 😜. Happy bashing as always!!! 🍻😎💪👊👊

Awesome to hear your feedback about the PP servo Austin 🤗. I normally run Hobbystar 5000mah 100c 6s single hardpacks with a single EC5 connector off the ESC. The body makes contact, but fits no problem. I also run a Spectrum Smart 4000mah 50c 6s pack that is super compact. That pack has crazy kick for it's rating and good runtime in the Typhon. 🍻😎💪👊👊

@@richduperbash2966 thank you! I’d like to see if you kill the pp servo or not. I highly recommend to anyone.

Thanks Brother 🤗. Absolutely LOVE this rig 😍. The Mojave chassis "Kraton XL" platform is a totally different experience. So stoked ARRMA adopted the concept with the Fireteam!!! I'd been wanting a caged body for so long. Just takes a hammering. 😎💪👊👊

Thank you Brother 🤗

Thanks Brother Dennis 🤗. Felt awesome to get the Fireteam and Truggified XL back out 😍. Love all the rigs, but those 2 are my favorites for pure FUN factor. 🚀🚀😎💪👊👊

My Truggified Typhon XL (last part of video) is my all around favorite RC 😍🚀🚀. Absolute screamer 👀. It's sporting wider Mojave arms, shafts, and links plus Kraton hubs and stub axels with M2C +5mm hexes. With Mojave wheels, she has the perfect amount of ground clearance while still having buggy like speed and handling. Yes... she's tiny compared to the Fireteam, but her speed and agility is ridiculous. 😎💪👊👊

@@richduperbash2966 I put Kraton hubs, stubs and hexes on mine with the stock arms for now and felony rear wheels on all 4 corners. The stance looks awesome. I saw they have katars for the Mojave I think I’ll try for dirt on it. I’ll try the arms later lol but then +5mm hexes? Hahaha isn’t that as wide as a standard outcast

Thanks very much Brother 🤗. The Mojave is one of the few ARRMA's I haven't owned. Some guys have ran the Talion Katars. I've only ran the stock Mojave wheels on my buddies rig. You could probably run a slightly bigger wheel with some body modification. 🍻

The rear M2C tower support is a must with the longer 1/7 Mojave style chassis 😱. It keeps the wing mount from busting where it attaches to the rear chassis support and bulkhead. The Basherqueen top brace ties in perfectly👌. Tiny amount of flex with no bendage and much lighter than stock. 😎💪👊👊

I agree 100% Brother 🤗. Lots of guys fretted over the little soldier dudes and appearance, but I absolutely LOVE my Fireteam 😍. The fun factor and durability is ridiculous 😂🍻😎💪👊👊

It is fundamentally the same, just a bit heavier with the caged body and beefy bumpers. Same chassis, braces, arms, and driveshafts. 🍻

@Rich Duperbash woulda been nice if they named it that.. with the soldiers and all. 😂 jk.

I bought a few sets of rears, just haven't ran them yet. They're definitely stiffer and heavier than the V1 RPM arms. Think Aldo Loyal has busted a set, but hopefully they're more forgiving than the stock V5/EXB arms. 😎💪👊👊

@@richduperbash2966 I'm just worried about bending dog bones. I cant land on wheels for the life of me. I'll let y'all know how it goes.

I generally run Power HD 23kg in my 6s rigs. Extremely durable with solid performance at a budget price. 🍻

LMFAO 😂. I here you Brother. The temptation is real and ever present 😍

Yes indeed. ARRMA rigs are wonderfully interchangeable. You must pair the Kraton hubs with Kraton stub axels and hexes (front and rear) Not sure why ARRMA didn't use this wider option to begin with given the Mojave chassis is 2 inches longer than the Kraton 🤔

@@richduperbash2966 right on! Thanks Rich, is there a hot racing or aluminum option for those aswell? I might try those out to make it more planted and the m2c hex’s

@@WildBoyRC I've always stayed with the stock plastic hubs. They're light and don't bust very often. The M2C chassis is what really makes these rigs planted in my opinion.

@@richduperbash2966 that makes sense! And I agree, I’ve stayed plastic everywhere on my sledge besides bulkheads and m2c chassis, m2c hub extensions & motor mount I’m going to do that. So just kraton hubs and stub axles is all I need ?

@@WildBoyRC yes but you need the Kraton hexes too. Best to check eBay or Jenny's RC. Usually cheaper than buying individual bits.

My son Andrew just got a Fireteam too 😱🥰🥰. Probably do some wrenching and building with my boy soon 🍻

@@richduperbash2966 I just traded a Traxxas Maxx V1 for a lightly used fireteam. I’ve stripped it down quite a bit and it needs some replacements so I’m going to get that M2C order in soon! Those new towers look beefy! Can’t wait to see you and your boy rip it up with the D-teams 😎👍🏻

@@RC_Berserker thanks Brother 😜. Can't wait to get Andrew back out 😍. The new M2C FT towers look so sick 👀