MOPAR COLD AIR INTAKE & RAM AIR HOOD KIT ANY GOOD??? 5.7 HEMI RAM

  Рет қаралды 111,670

Mopar Motorsports

Mopar Motorsports

5 жыл бұрын

Dont forget to subscribe and tap the bell. In this video I review the mopar performance cold air intake kit and the ram rt/sport upper ram air hood kit for the 5.7 hemi ram trucks.
check out the frostbite ram store for cool tee shirts and merch
teespring.com/stores/frostbit...
Instagram@frostbite_ram
/ frostbite-ram-10588992...

Пікірлер: 295
@colegardner165
@colegardner165 5 жыл бұрын
Your videos have really helped me out lately, I have a ‘13 charger rt with the same exact lifter problem at 114k on the motor. What a shame haha however I’m going with a cam and heads set up from demon performance and can’t wait to get it back. Very cool channel man!
@FrostbiteRam
@FrostbiteRam 5 жыл бұрын
I'm glad my videos are helping you out bro And thanks for hanging out on the channel very Much appreciated. Every mod and repair I do on frostbite I do myself I'm trying to make this channel a very helpful DIY channel for all 5.7 hemi's no matter what the engine is in. Yes it's a shame that Chrysler made such a crapy lifter design but it is what it is. once you upgrade it and go with those hellcat lifters you will make a ton more power and be much more reliable.
@colegardner165
@colegardner165 5 жыл бұрын
Frostbite Ram I’ll definitely post a video or two of it when it gets done, I’m going with the “Chucky Norris” cam, it’s basically a comp 270 just easier to tune. What part of Ga are you from man?
@FrostbiteRam
@FrostbiteRam 5 жыл бұрын
@@colegardner165 I'm in gwinnett county
@colegardner165
@colegardner165 5 жыл бұрын
Frostbite Ram I’m not too far from you, I’d love to meet up one day with you whenever I get my car back, maybe do some runs on motor against each other for your channel.
@FrostbiteRam
@FrostbiteRam 5 жыл бұрын
@@colegardner165 definitely sounds good
@itzreece6347
@itzreece6347 5 жыл бұрын
To you Sir I say thank you, I stumbled upon your channel while looking for something totally not dealing with the Ram. I am glad I stumbled upon you because I said to myself many times that I wished they made an intake system that made the hood vents functional and you have made my day. The price is a bit high but I think I would bite the bullet for that setup. Seeing that it does work very good and add in again that the hood vents aren't just there for show. Thank You Sir & I also subbed for more content on your channel. God Bless
@FrostbiteRam
@FrostbiteRam 5 жыл бұрын
Thanks brother for the support I'm happy the channel helped you out.
@isaacleon3943
@isaacleon3943 5 жыл бұрын
You have inspired me to start modifying my ram rt !!
@FrostbiteRam
@FrostbiteRam 5 жыл бұрын
That's awesome I appreciate you supporting the channel I'm doing my best to put up content and work a full time job lol.
@NarcRider2
@NarcRider2 6 ай бұрын
A good thing about the mopar performance upgrade is you add value to your vehicle its not considered aftermarket its factory performance.
@FrostbiteRam
@FrostbiteRam 6 ай бұрын
Exactly
@shyshotcaller27
@shyshotcaller27 3 жыл бұрын
So many ideas. I've been researching for almost three weeks straight. I need to find some custom spots in paulding County 💨💨💨
@chadkinard9925
@chadkinard9925 Жыл бұрын
Thanks for all your videos they very informative. I'd like to get some advice on a project I have coming up for my 05 ram 1500 slt. Thanks for your time
@TaylorMadejdm1975
@TaylorMadejdm1975 2 жыл бұрын
Great video bro and very detailed don't listen to that guy in the comments about you talking too much if you don't articulate you cannot communicate you know what I mean that's what KZfaq is for. For people to help each other and relay information anyway great job will be subscribing from now🍺👍
@FrostbiteRam
@FrostbiteRam 2 жыл бұрын
Awesome thanks for stopping by the channel 👍
@dennismillus4581
@dennismillus4581 3 жыл бұрын
Thanks for the honest review. Nice system
@FrostbiteRam
@FrostbiteRam 3 жыл бұрын
Thanks 👍
@high_octane_hemi1433
@high_octane_hemi1433 5 жыл бұрын
Bro that's a nice setup. I like how it's a 2 way system to get more air flowing in.
@FrostbiteRam
@FrostbiteRam 5 жыл бұрын
Yea, I love the kit plus it's a factory part so fits like a glove.
@berardoferrari
@berardoferrari 3 жыл бұрын
@@FrostbiteRam what if you have plastic wheel well covers?? it blocks the air. and that little vent on the hood seems too small to get enough air into the air box.
@FrostbiteRam
@FrostbiteRam 3 жыл бұрын
@@berardoferrari gets plenty of air from the fender and hood
@silverbautista1101
@silverbautista1101 2 жыл бұрын
“Air can actually ram through the vent” I see what you did there lol
@123antknee
@123antknee 4 жыл бұрын
Thank Upper Kit is BAD ASS!!!!
@MiguelHernandez-iw1lx
@MiguelHernandez-iw1lx 4 жыл бұрын
Nice set up bro all it needs is an oil catch can
@backupweedman
@backupweedman 5 ай бұрын
Im getting one thats awesome
@lizzardmoto9386
@lizzardmoto9386 3 жыл бұрын
Good information 💪
@supercuda1950
@supercuda1950 2 жыл бұрын
I think you will find that the single scoop inlet (especially when shooting nitrous) does not flow enough. Granted it does flow cold outside air but so does the fender inlet. This is why Mopar factory cars always had huge hood scoops. I doubt if both scoops would flow enough. The advantage is that even the small amount of cold air gained is better than none at all, especially when mixed with the air from the fender. I went to a supercharger, which uses an intercooler mounted in front of the radiator, but that is a completely different animal.
@RTLife
@RTLife 5 жыл бұрын
That is actually a really awesome intake setup - very big upgrade!
@FrostbiteRam
@FrostbiteRam 5 жыл бұрын
Thanks man I really love it and its mopar 😜
@black_hearted6925
@black_hearted6925 3 жыл бұрын
The other hood vent is for heat extraction
@MrKingVulture
@MrKingVulture 3 жыл бұрын
Nice wish I could do this on a 300s
@canadaplace2be176
@canadaplace2be176 4 жыл бұрын
My cold air. I use vents on top of top of hood. Lots of air and lots of water n salt to
@justinllamas4518
@justinllamas4518 2 жыл бұрын
Hey I’m very interested in going this route after having the s&b the only thing that stopping me from going this route is could I upgrade the manifold possibly the 6.4 one but could I still use it
@MrHRDGAMER
@MrHRDGAMER 4 жыл бұрын
This was a great find for you on offer up
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
Indeed 👍
@MrHRDGAMER
@MrHRDGAMER 4 жыл бұрын
Frostbite Ram quick question I’m new to the dodge/ram world. What would be the difference from an 2014 r/t to a new 2018 ram sport night? Other then some cosmetics Thanks
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
@@MrHRDGAMER I believe the rt will have better gearing in the rear possibly
@YTLuc
@YTLuc 4 жыл бұрын
Thank you for the review! Question: Mopar Performance Cold Air Kit 5.7L, Part# 77072428AB. Is this the cold air intake that you are reviewing? Thanks.
@TonyTheTruckGuy
@TonyTheTruckGuy 4 жыл бұрын
I thought you were saying “sill”, but it was “seal” 😂 Looks like a nice setup!
@chrisdejong2481
@chrisdejong2481 4 жыл бұрын
Cool beans!
@malcolmmclean7325
@malcolmmclean7325 2 жыл бұрын
hey man, great vid. about to install the ram air hood vent on mine. just wondering : in your vid, about 3:30 , to the right of your cold air you can see some aftermarket wiring or hoses? how do I do that or what did you replace. I like the look. looks clean as hell up under that hood
@FrostbiteRam
@FrostbiteRam 2 жыл бұрын
Perhaps your talking about the nitrous kit wires?
@malcolmmclean7325
@malcolmmclean7325 2 жыл бұрын
@@FrostbiteRam oh snap! You got nitrous in your ram haha? That's crazy! Cool af though
@thegreatempire3882
@thegreatempire3882 5 жыл бұрын
How much did the Cai and the ram air scooter run you? It’s about $933 for both kits for me.
@Kiwitakimago
@Kiwitakimago 2 жыл бұрын
Why didn’t they make the rubber tube smooth? With the grooves in it it seems a little inefficient!
@unixdoes
@unixdoes 3 жыл бұрын
looks nice, but not sure why they used aluminum tube...seems like it'd heatsoak
@kimojon9665
@kimojon9665 4 жыл бұрын
Ram trucks are so awesome!!!
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
Hell yea🍻
@kevinp4531
@kevinp4531 4 жыл бұрын
Awesome video! Just wondering if you've ever looked at the Vararam air grabber intake? Wondering if it's any better. Massively less expensive. I've looked at your system and the price is the only thing stopping me.
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
Yes it's good as well but not a factory part. I also like the hood being functional also.
@kevinp4531
@kevinp4531 4 жыл бұрын
Thats true. Just trying to justify the price. I'm in Canada and the price for me is over a grand for top & bottom so have to think on it a little longer.
@johnqpublic1079
@johnqpublic1079 3 жыл бұрын
Would been nice and more useful if you started ut so we could hear the difference
@jaysonwheat2344
@jaysonwheat2344 3 жыл бұрын
Do you have a video installing the upper kit?
@SuperSaiyanX-0014
@SuperSaiyanX-0014 5 жыл бұрын
What type and year is your Ram? I have the 2019 new body style, 5.7 eTorque. Trying to get a CIA, but I've been told that mopar hasn't released one yet for that year, unless it's the classic. I'm thinking either Mopar or Vararam. And seeing your video, now I'm thinking maybe to cutouts for the hood as well.
@mike-nd7um
@mike-nd7um 5 жыл бұрын
Hi, I had a Vararam intake and in my opinion, it was not worth the money. Negligible performance gains without a tune and really, negligible performance gains over other CAIs. It didn't fit very well. The filter is really frustrating to attach in the body of the intake. The kit requires that you cut or remove the front sight shield on top of the radiator so the intake scoop can have access to the grille. Bolt holes didn't line up where the scoop attached to the body of the intake. The only thing supporting the weight of the intake is the rubberized tube that sits on top of the throttle body. My biggest gripe with it was that it looked really junky. The rubber bellows on the bottom of the intake look weird and are obviously a design afterthought. It seriously looked like an unfinished test rig for a future finished product. I would go with literally any other CAI and a good tune.
@angryace4017
@angryace4017 2 жыл бұрын
I know this is an older video, but I just picked up a 2022 1500 Built To Serve Edition and the Mopar cold air intake "lower" kit is $944, over double of a K&N or S&B kit. I could not believe the price I was quoted... good video though!
@FrostbiteRam
@FrostbiteRam 2 жыл бұрын
Dang I would look on ebay and Amazon
@1234tellmewhatyourlookingfor
@1234tellmewhatyourlookingfor 4 жыл бұрын
Most cold air kits 400 dollars and less do not add a lot of hp. A full function factory ram air hood, along with the pickup from the lower may be worth 800 bucks if you have a high flow exhaust and a tuner. I cant see any other air kit that would be true ram air.
@darrellsyrnyk6875
@darrellsyrnyk6875 5 жыл бұрын
Looks great . but I don't think that 4 in intake would still fit after installation of a supercharger ?? I have a 2014 crew cab Dodge Ram 1500 . no sport hood . I was thinking of letter box the hood for my intake.
@FrostbiteRam
@FrostbiteRam 5 жыл бұрын
Probably not
@ianhinkle1878
@ianhinkle1878 5 жыл бұрын
This is the only 15+ second channel intro that I don’t mind
@FrostbiteRam
@FrostbiteRam 5 жыл бұрын
Hot damn hell yea🤘👍👊
@pzpinkslip123
@pzpinkslip123 4 жыл бұрын
Is the other one that nba guy.
@qazwsx80
@qazwsx80 3 жыл бұрын
Hello. Great review. I just ordered mine from local dealer. Curious if after all this time you would still recommend installing this and for a daily driver. Thanks.
@FrostbiteRam
@FrostbiteRam 3 жыл бұрын
Definitely this is my favorite cai
@NCICRESQ
@NCICRESQ Жыл бұрын
What’s the bottom line? Does it improve on the mileage? Better than 14 mpg? Or was that 14 gpm?
@moralescesar19
@moralescesar19 5 жыл бұрын
Loving The channel, Hey Frostbite I have the lower mopar intake system for my ram rt, would you say its worth it to buy the upper ram air kit? Been debating if I should pull the trigger or not
@FrostbiteRam
@FrostbiteRam 5 жыл бұрын
If you have the lower already and the sport hood I would for sure
@moralescesar19
@moralescesar19 5 жыл бұрын
Frostbite Ram Thank You, just pulled the trigger on it, also did the breather tube delete thanks to your video !
@FrostbiteRam
@FrostbiteRam 5 жыл бұрын
@@moralescesar19 you wont be disappointed it's a very good kit,the upper hood kit can be a little aggravating to install but fits like a glove. Thanks for the support with the channel 🤙
@mightymikeamps9317
@mightymikeamps9317 3 жыл бұрын
@@FrostbiteRam Was there a noticeable difference in performance before and after the upper part was installed.
@FrostbiteRam
@FrostbiteRam 3 жыл бұрын
@@mightymikeamps9317 not much just lower ait
@ppen62
@ppen62 3 жыл бұрын
Great informant video frostbite sir ! I had installed the low mopar cold air intake 4 years ago never had any issues. After seeing your video hearing your opinion on it I’m glad I made the purchase but I have ran in to a problem and wondering if this has occurred to you if you still have yours. I still have some of my mopar air intake filter cleaner but just enough for one more cleaning. For some reason I can’t find the official mopar cold air intake cleaning kit no where on line or either showing out of stock have you ran into that problem and if so can or do the cold air intake filter for changer have a cleaning kit cause I saw 1 video where the guy one installed and the filter looked exactly like my filter same blue color ,size and shape. Thank You it you know any other Sesser to to clean my filter
@FrostbiteRam
@FrostbiteRam 3 жыл бұрын
K&n sells filter cleaner its the same thing.
@ppen62
@ppen62 3 жыл бұрын
Thanks for replying back. But from reading Mopar only recommends their cleaning kit. Also K&N air intake filter is black and I think the oil is gonna be black. Anyway i’ll figure it out I’ll call the dealership tomorrow and see was going on but hey man thanks for replying and give me your info on it have a great start of the new year 2021
@FrostbiteRam
@FrostbiteRam 3 жыл бұрын
@@ppen62 the kn stuff i have is slightly pink not black.
@ppen62
@ppen62 3 жыл бұрын
@@FrostbiteRam oh ok I will check it if everything else fails THANKS
@canadaplace2be176
@canadaplace2be176 4 жыл бұрын
I use my hood vents for clean air. U got sitting in a box. Open it up flow flow brother
@19five7
@19five7 5 жыл бұрын
I'm running the vararam I like it..
@FrostbiteRam
@FrostbiteRam 5 жыл бұрын
That's a good one also.
@SuperSaiyanX-0014
@SuperSaiyanX-0014 5 жыл бұрын
Big Joe, what year is yours? I'm looking at a vararam for my 2019. I'm worried about it not fitting.
@19five7
@19five7 5 жыл бұрын
@@SuperSaiyanX-0014 mine is a 2011 ram RT
@brewaire
@brewaire 4 жыл бұрын
That was my thought in a money comparison. You could get a vararam intake and a ported or bigger throttle body vs. the cost of the complete mopar air intake.
@dengel2
@dengel2 5 жыл бұрын
Great vid! Does it sound different now??
@FrostbiteRam
@FrostbiteRam 5 жыл бұрын
Yes it did make it sound really throaty
@joeorlando1955
@joeorlando1955 2 жыл бұрын
I will soon be buying a RAM and planned on adding Mopar Accessories. Question - driving in the rain - won't that cause problems with water getting into the box?
@FrostbiteRam
@FrostbiteRam 2 жыл бұрын
No issues at all
@tonyh4381
@tonyh4381 5 жыл бұрын
Good video! Any idea if it will fit a 2019 Ram Classic with the 5.7?
@FrostbiteRam
@FrostbiteRam 5 жыл бұрын
It should
@SuperSaiyanX-0014
@SuperSaiyanX-0014 5 жыл бұрын
@@FrostbiteRam How about the 2019 New Body 5.7 with eTorque? My local mopar dealer claims that Mopar has yet to release a CIA for the All new 2019 models.
@kayway9329
@kayway9329 5 жыл бұрын
@@SuperSaiyanX-0014 go to mopars website and they have a 5th gen CAI system available
@joe7528
@joe7528 3 жыл бұрын
2 part question Q#1 do you have to get a tune after install cold air intake or can you still keep factory specs? Q#2 does the upper setup allow water or moisture to be sucked into the box and possibly get into the throttle?
@FrostbiteRam
@FrostbiteRam 3 жыл бұрын
No tune necessary and I never had water get in to be a problem its a genuine mopar factory part if it didn't work they wouldn't offer it.
@joe7528
@joe7528 3 жыл бұрын
@@FrostbiteRam okay thank you ... i might get me the lower part
@reggiecoles6616
@reggiecoles6616 5 жыл бұрын
YOU LUCKY 🍀 DOG!!!!!!!!!
@clipvue222
@clipvue222 3 жыл бұрын
Do you know the part numbers on this Mopar parts
@hwsfinnest986
@hwsfinnest986 4 жыл бұрын
Let me ask , with the rt sport hood , don't you get rain and dirt in there ..?? This is the only thing I'm afraid of because I have the mopar instake and mopar exhaust on mine but I'm going to order the hood but wondering if I should order the functional or nonfunctional hood because of the rain and dirt which I. Afraid of
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
I didn't have any issues at all .
@toofastnobrakes
@toofastnobrakes 5 жыл бұрын
Do you think the cold air intake and an APM air hood would do well for a 2500 with the 6.4 hemi?
@FrostbiteRam
@FrostbiteRam 5 жыл бұрын
I would think so,probably not huge difference but should help.
@moparlife3499
@moparlife3499 3 жыл бұрын
Yea I can’t find one for 2020 ram ... ughhh
@ROADWARRIOR21
@ROADWARRIOR21 4 жыл бұрын
if you install one of these Mopar kits what happens to that small hose that goes to the box if you have a oil catch can?
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
It has a hook up for breather
@dayylevi
@dayylevi 5 ай бұрын
Quick question bro I have the kit and I’m getting ready to install but I’m in Ohio and the weather is crazy should I worry about rain or snow going through the vent or will it be fine with just regular maintenance
@FrostbiteRam
@FrostbiteRam 5 ай бұрын
Not at all
@MrHRDGAMER
@MrHRDGAMER 4 жыл бұрын
You ever get rid of this set up (air intake and hood dump) let me know I’ll buy it ASAP
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
I sold the lower unit and I'm still using the upper for the supercharger it works well with blowing air on the supercharger.
@MrKingVulture
@MrKingVulture 3 жыл бұрын
I’d by it too and I don’t even have the truck
@Careertruckingschool
@Careertruckingschool 3 жыл бұрын
What u think if I just get the top set up I have a k&n intake but don’t want to spin 500 on the bottom set up just want the hood working
@FrostbiteRam
@FrostbiteRam 3 жыл бұрын
Just drill and mill out your factory scoops with a dremel.
@abdullahal-shimri3091
@abdullahal-shimri3091 5 жыл бұрын
I'd rather buy this setup than an aftermarket CAI. Pricey but I know it was designed for my truck only. Where can I buy that hood? ADD: Money comes and goes my friend. Work hard and spend it on what you enjoy!
@FrostbiteRam
@FrostbiteRam 5 жыл бұрын
You can get it from mopar performance
@armandniosi7657
@armandniosi7657 3 жыл бұрын
Is this cold air intake a good match with the factory exhaust? Or do you recommend after market like corsa or borla?
@FrostbiteRam
@FrostbiteRam 3 жыл бұрын
It works great with either.
@lysias55
@lysias55 3 жыл бұрын
go with Carven Competitor system
@mytexaslife3584
@mytexaslife3584 2 жыл бұрын
So I hear if you install an after market intake you will void the factory warranty. Does using the Mopar intake system protect from that. Been wanting to install one on my RAM.
@FrostbiteRam
@FrostbiteRam 2 жыл бұрын
The Mopar system is a factory part should not void the warranty.
@charleslincoln7497
@charleslincoln7497 Жыл бұрын
What’s your take on ported throttle Or should I just buy bigger throttle from my local parts place
@FrostbiteRam
@FrostbiteRam Жыл бұрын
Stock tb is more than enough I'm still using the stock 5.7 bigger is waste of money.
@mikeyd8384
@mikeyd8384 3 жыл бұрын
Does Mopar make this style intake for the 2020 ram? I can't seem to find one , can only find the upper style for almost a thousand bucks🤷🏼‍♂️
@FrostbiteRam
@FrostbiteRam 3 жыл бұрын
Not sure on the newer trucks.
@purplehaze9565
@purplehaze9565 5 жыл бұрын
I’ve been considering getting one of these. I think I’m going to bite the bullet and expense.
@FrostbiteRam
@FrostbiteRam 5 жыл бұрын
Its definitely a nice piece you will like it.
@adventuresoftheuneducatedh7813
@adventuresoftheuneducatedh7813 5 жыл бұрын
Frostbite ram would you say that would be the best intake for the ram trucks in your opinion
@FrostbiteRam
@FrostbiteRam 5 жыл бұрын
It's very expensive, but I believe so and it's a factory mopar performance part.
@timmartin4798
@timmartin4798 5 жыл бұрын
I have the vararam and it made a noticeable difference even without a tune.
@HotOneRecordz
@HotOneRecordz 3 жыл бұрын
I bought this about 5 years ago. I don't have a sport hood and still don't use the Mopar lid 🤣
@FrostbiteRam
@FrostbiteRam 3 жыл бұрын
Awesome 👍
@HotOneRecordz
@HotOneRecordz 6 ай бұрын
I got a sport hood now 😂
@donearl6675
@donearl6675 5 жыл бұрын
👍👍😎!
@dallastexas4503
@dallastexas4503 2 жыл бұрын
Had a cai in my last truck man it seemed to get the oil dirty quicker after i installed it idk if i wanna do rhat again
@FrostbiteRam
@FrostbiteRam 2 жыл бұрын
This is mopar oem works great
@justinp9647
@justinp9647 4 жыл бұрын
What happens when you drive 4-5 hours in a downpour of rain? There’s no way the filter doesn’t get wet right? Just wondering. Thanks!!!
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
No problems at all, considering it's Manufactured from mopar I'm sure they thought about that. I've been in plenty of rain never a problem.
@corporateair4853
@corporateair4853 3 жыл бұрын
What Kit would you recommend for ...2003 5.7.... I bought the truck new and I will die with it.. Thank you for your videos...
@FrostbiteRam
@FrostbiteRam 3 жыл бұрын
Not sure whats available for the 03 but can't go wrong with mopar kits
@corporateair4853
@corporateair4853 3 жыл бұрын
@@FrostbiteRam Thank you
@robertworley2280
@robertworley2280 Жыл бұрын
Did you remove the felt underneath the hood? Does that make it hotter inside the engine???
@FrostbiteRam
@FrostbiteRam Жыл бұрын
Yes I did and didn't notice any difference at all.
@Red-Eagle
@Red-Eagle 2 жыл бұрын
I know it's 2 years old but I just got a 3.6L 2017 Dodge Journey. Would this be a good idea?
@FrostbiteRam
@FrostbiteRam 2 жыл бұрын
I would probably just get a drop in k&n filter for that personally
@jbirdbson
@jbirdbson 4 жыл бұрын
I'm sure this has been answered, but I cant seem to find it. Any issues with rain? Washing?
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
No problems with water at all for me.
@jbirdbson
@jbirdbson 4 жыл бұрын
@@FrostbiteRam Any issues with it at all? Check engine light? Mass airflow sensor?
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
@@jbirdbson nope fits and works great factory manufactured part
@12ez4U
@12ez4U 4 жыл бұрын
Did you had any issues lining up the top part with the bottom box, I bought mine and I can not get it to line up, the reason I'm asking is because I noticed your 4 inch tube looks like is bend?
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
The top was tricky to get in but it all fits great for me.
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
This may help you kzfaq.info/get/bejne/iq5gntBqssrMYnU.html
@12ez4U
@12ez4U 4 жыл бұрын
@@FrostbiteRam I think my box bottom may be a little warped with the heat since I have had it for about 3 1/2 years now(2 years on a 2014 and 1 1/2 on a 2018 Rebel. No matter how I try to rearrange the box it will not line up, I wonder if it has warranty?
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
@@12ez4U it might but your sure you got the top piece in right.
@12ez4U
@12ez4U 4 жыл бұрын
@@FrostbiteRam I'm sure everything seats and lines up perfectly on the top, especially since I still have the hood liner and I cut the hole with the paper that comes in the installation kit. The hole lined up perfectly with the hood light and the other metal bracket on the side that holds the side of the liner. I'm not sure what else could I adjust on the top.
@Logan-ix8vh
@Logan-ix8vh 2 жыл бұрын
Brother I meant no offense by my comment of you going this route because I myself am going to take this route 😆 any way you have any info where I can find the intake and the kit to the hood my truck is 2018
@FrostbiteRam
@FrostbiteRam 2 жыл бұрын
I've seen them on ebay and online mopar parts dealers. Not cheap but worth it. The lower setup is around 500$ and the upper piece is about 300$ however I still have the upper hood kit if intrested i could sell it to you a little cheaper then all you need is the lower setup message me on Facebook or Instagram if intrested.
@Logan-ix8vh
@Logan-ix8vh 2 жыл бұрын
@@FrostbiteRam ok I will try to look you up on instagram and face book
@velocityworks
@velocityworks 3 жыл бұрын
Whats about rain water running through the hood scoop
@FrostbiteRam
@FrostbiteRam 3 жыл бұрын
Not an issue
@mr.gtmsworld2494
@mr.gtmsworld2494 2 жыл бұрын
What about water getting inside the air box thru the hood vent?
@FrostbiteRam
@FrostbiteRam 2 жыл бұрын
Not a problem
@huntersmith8878
@huntersmith8878 3 жыл бұрын
What is this part name?
@jasonhoover1707
@jasonhoover1707 2 жыл бұрын
I just installed the ram air and it made a big difference one question do u have to take the upper off when I use the lower section
@FrostbiteRam
@FrostbiteRam 2 жыл бұрын
If you have the hood kit then you take off the lid on the lower box to ram air from the hood.
@jasonhoover1707
@jasonhoover1707 2 жыл бұрын
I mean when I'm not racing it do I put the lid back on when I'm daily driving
@FrostbiteRam
@FrostbiteRam 2 жыл бұрын
@@jasonhoover1707 nope no need to
@jasonhoover1707
@jasonhoover1707 2 жыл бұрын
Thanks man ik this intake Is got it dialed in 6.4 heads and manifold is next we going to have to get the twins together ❤
@FrostbiteRam
@FrostbiteRam 2 жыл бұрын
@@jasonhoover1707 awesome 👍
@jcesparza7490
@jcesparza7490 4 жыл бұрын
Anyone know where to buy vents that already have the holes open, I know I can drill mine, but rather just buy them.
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
You can buy the passenger side vent for the kit but for the driver I had to drill mine out.
@jcesparza7490
@jcesparza7490 4 жыл бұрын
Frostbite Ram got a link, or name of website, please.
@anthonymudboss
@anthonymudboss 4 жыл бұрын
Where can I buy the mopar cold air and the duct intake 2019 ram classic I’m in Canada and can’t seem to find it anywhere
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
Ebay
@anthonymudboss
@anthonymudboss 4 жыл бұрын
Frostbite Ram thanks I’ll Check it out
@chrissnyder2680
@chrissnyder2680 4 жыл бұрын
www.moparpartscanada.ca/oem-parts/mopar-cold-air-intake-system-82214741ab www.moparpartscanada.ca/oem-parts/mopar-cold-air-intake-77070023ac
@aaronrivas3418
@aaronrivas3418 5 жыл бұрын
Have you had any issues with water getting in??
@FrostbiteRam
@FrostbiteRam 5 жыл бұрын
Nope
@kmerdita84
@kmerdita84 5 ай бұрын
Any problems with water would it suck in all the rain and car washes
@FrostbiteRam
@FrostbiteRam 5 ай бұрын
No problems with that
@jamesbilof4201
@jamesbilof4201 4 жыл бұрын
When it rains, is water an issue?
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
Nope not at all and drive it alot 🤘
@Tsworld_193
@Tsworld_193 4 жыл бұрын
What’s the name of the upper system for good I’m looking for it but can’t find it ?
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F362598104107
@christopherfrye8115
@christopherfrye8115 4 жыл бұрын
I'm guessing you need a tune with this? Also, what year is that truck?
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
2011 and no tune needed but you will get the most power out with a tune.
@christopherfrye8115
@christopherfrye8115 4 жыл бұрын
@@FrostbiteRam did you use diablo tuner to tune it?
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
@@christopherfrye8115 I use a diablo trinity programmer and I use jay greene for custom tuning.
@dgutierrez104
@dgutierrez104 4 жыл бұрын
I got the same cold air intake in my 2014 Ram 1500 sport. I notice a difference when accelerating on the gas. Sounds mean
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
Its definitely I nice unit
@jayce2299
@jayce2299 3 жыл бұрын
Really don’t get why they just can’t make “air vents” real and not just some fake “looks” cool part
@JOSEGUTIERREZ-pb2nv
@JOSEGUTIERREZ-pb2nv 4 жыл бұрын
Did it increase your MPG’s
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
I wouldn't say I could notice but definitely a power increase up top.
@chrissnyder2680
@chrissnyder2680 4 жыл бұрын
Do you have a part number for the hood vent ? Can't seem to find it anywhere.
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
I sure dont but I found it on Ebay
@chrissnyder2680
@chrissnyder2680 4 жыл бұрын
@@FrostbiteRam Found it www.moparpartscanada.ca/oem-parts/mopar-cold-air-intake-system-82214741ab
@bruhshutup4828
@bruhshutup4828 4 жыл бұрын
I have a 2014 ram 1500 sport is this any good for it?
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
It's a great cai kit
@nathancole9823
@nathancole9823 4 жыл бұрын
I am looking to have my hemi cammed but I can’t find a person around who can install it and tune it. Everyone around me just does Chevy LS engines. I’m in Alabama. Anyone have any ideas on what I should do?
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
If you bring it to GA I would recommend allpar garage in Lilburn
@nathancole9823
@nathancole9823 4 жыл бұрын
Frostbite Ram oh my gosh thank you. I just checked out their webpage and they do everything that needs to be done. Thank you so much. It’s only 2hr 40 minutes which isn’t even a bad drive.
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
@@nathancole9823 no problem bro be sure to tell em I sent you🙏
@nathancole9823
@nathancole9823 4 жыл бұрын
Frostbite Ram oh yes for sure I will. It will be a bit before I can get down there as I just spent money on other things for my truck I’m doing a race build.
@baljinderbenipal2663
@baljinderbenipal2663 5 жыл бұрын
Does the mpg go up with that system?
@FrostbiteRam
@FrostbiteRam 5 жыл бұрын
Cant say I noticed a difference but it definitely didn't go down.
@mike-nd7um
@mike-nd7um 5 жыл бұрын
Not without a tune. The mass air flow sensor adjusts for the increase in air flow.
@jcampa8761
@jcampa8761 2 жыл бұрын
Will this kit fit a 2021 ram rebel 5.7?? Or do they have a different kit for it??
@FrostbiteRam
@FrostbiteRam 2 жыл бұрын
Should fit fine the hood kit only fits the sport hoods like mine.
@jcampa8761
@jcampa8761 2 жыл бұрын
@@FrostbiteRam nice brother thank you. Yeah the RT hood. I looked up if they had the hood kit for the rebel hood but no luck 😞
@kokkolino1196
@kokkolino1196 4 жыл бұрын
My question is from the functional sport hood is it any water and dirt come in the air box / filter??
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
Nope I never had any issues
@kokkolino1196
@kokkolino1196 4 жыл бұрын
Frostbite Ram awesome thank you!!! Have you notice any significant HP increase or dyno test? Asking to see if the price can get justified as like the whole set up!! Thanks bro
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
I'm sure gains would be minimal just like any other cai but atleast this one is mopar made.
@kokkolino1196
@kokkolino1196 4 жыл бұрын
Frostbite Ram excellent thank you bro keep up the honest reviews!!!
@ricktheprick577
@ricktheprick577 4 жыл бұрын
YES, you do get dust and bug parts, if you didn’t you would never have to clean your filter!
@PointWithin
@PointWithin 2 жыл бұрын
Will this fit a 2016 Rebel?
@FrostbiteRam
@FrostbiteRam 2 жыл бұрын
Yes should fit fine
@azm690
@azm690 3 жыл бұрын
Can anyone tell me where I can get that black rubber elbow ??
@FrostbiteRam
@FrostbiteRam 3 жыл бұрын
Probably have to check with dealership or mopar parts online.
@Dr._Swash_Buckler
@Dr._Swash_Buckler 4 жыл бұрын
How does it keep the water out?
@FrostbiteRam
@FrostbiteRam 4 жыл бұрын
The filter is set back away from any drips but I've never had water get on the filter
@sherwanlewis9179
@sherwanlewis9179 3 жыл бұрын
So do you need the hood and upper kit ?
@FrostbiteRam
@FrostbiteRam 3 жыл бұрын
No its optional
@richardelfstrom2322
@richardelfstrom2322 3 жыл бұрын
Whats the part number for the upper kit?
@FrostbiteRam
@FrostbiteRam 3 жыл бұрын
Not sure any more but ill see if I can find it.
@DJlokoShred
@DJlokoShred 5 жыл бұрын
Fuck idk I seen that the k&n has finally updated their website for the new model but idk what to go with fuck afe,mopar,or K&n lmao
@FrostbiteRam
@FrostbiteRam 5 жыл бұрын
The Mopar kit it is very nice It by far has the biggest air Box but cost more.
@dylansmith3628
@dylansmith3628 3 жыл бұрын
What years of rams is this compatible with ?
@FrostbiteRam
@FrostbiteRam 3 жыл бұрын
Any with the hemi and the sport hood pretty much all the 4th gens
@dylansmith3628
@dylansmith3628 3 жыл бұрын
@@FrostbiteRam ok but nothing like this for 3rd gens
Vararam Air Intake - Ram Rebel
15:59
Waterfowler 41
Рет қаралды 83 М.
BEST THREE EASY DIY PERFORMANCE MODS FOR YOUR 5.7 HEMI
12:21
Mopar Motorsports
Рет қаралды 607 М.
Gym belt !! 😂😂  @kauermtt
00:10
Tibo InShape
Рет қаралды 15 МЛН
Stay on your way 🛤️✨
00:34
A4
Рет қаралды 8 МЛН
Despicable Me Fart Blaster
00:51
_vector_
Рет қаралды 26 МЛН
You Laugh You Lose | Dumb Fails
19:18
FailArmy
Рет қаралды 1,9 МЛН
Customer States Compilation (Best of May & June 2024) | Just Rolled In
13:42
2009-2018 RAM 1500 5.7L HEMI Rough Country Cold Air Intake Review & Install
16:48
HOW TO: Turn Off MDS On Hemi Ram Trucks
6:00
IWrocker
Рет қаралды 504 М.
How To Clean Your MOPAR CAI Air Filter
11:44
Offbeat Motors
Рет қаралды 10 М.
K&N Intake For the Ram 1500 (HP GAINS)
10:01
Trey D Kicks
Рет қаралды 63 М.
Vararam Air Grabber Test and Review: 2019 Ram Rebel 5.7 Hemi
20:48
Gym belt !! 😂😂  @kauermtt
00:10
Tibo InShape
Рет қаралды 15 МЛН