I've never messed with honda EFI but I know for most basic auto manufacturer EFIs that the coolant temp sensor directly affects the idle air control valve so maybe it's the engine dropping down in temp dramatically thats causing the temp sensor to tell the ecm it needs a rush of more fuel and may be the reason it stalls out. Possibly find the resistance of the ECT when up to temp and just not run the ECT for a test in the water with a set resistance.
@xzachx21123 жыл бұрын
There is an idle adjustment. If you take the plastic cover off the right side of the throttle body where the cable goes in, there is an idle set screw just like the older carbureted Honda’s. There’s a lock nut on the idle set screw and you use a small Allen to adjust it. I turned mine up a little and I’m curious if it’ll help idle underwater
@jasonbubley94273 жыл бұрын
Good to know. Thanks mud puppy. Make these companies step up their game and make products that actually do something.
@ProjectAjax3 жыл бұрын
Good video sir
@yohanathandowns90573 жыл бұрын
Just need to wait for the next gen 2 cyl machines ;)
@jrproductions73193 жыл бұрын
Just idle it up on the throttle cable a little bit
@rockerby97722 жыл бұрын
bro it took me a year to think of this and i just came to comment it i feel so dumb rn
@colbystidham38553 жыл бұрын
Wassup mud puppy big fan
@JamesParus3 жыл бұрын
Maybe the cylinder shrinks and the piston is too hot and big. If you easy into water the piston cools also and has room to move.
@colingrippi24352 жыл бұрын
what rims are on the 300
@tylerwise5053 жыл бұрын
all my buddies and I got copper 90 and all got 02 deletes from Ashton and it does help out a lot. all of our bikes will idle now
@Tylerrogers58072 жыл бұрын
He has provided proof in his videos that those "mods" dont do anything
@Stufferburg3 жыл бұрын
Ever try snorkeling the exhaust? Isn’t the psi from the water pushing against the exhaust messing with the back pressure? Just a thought
@elicarsonl Жыл бұрын
then you can’t water wheelie
@SoggyBottomConcepts4 ай бұрын
I think it’s bc there is to much back pressure in the stock exhaust so when you take it deep, it causes more pressure. I’ve heard people fixing this issue by pulling out the clean out plug in the exhaust. I’m gonna try it
@drqqo2 ай бұрын
did pulling the plug on exhaust help?
@RcBasher50003 жыл бұрын
Had an issue with my 2020 had it rebuilt and now I don’t have the problem I used to when it would touch water and die did fine on the ride I took it when I got it back only died once
@loganthomas50433 жыл бұрын
I have a 1998 Honda 300 fourtrax 4x4. Would I be able to mount a 2” bracket lift and still use some 420 shocks?
@MudPuppyOffroad3 жыл бұрын
No. And 2" lifts are trash
@loganthomas50433 жыл бұрын
What kind of lift would you recommend and where can I get one if I ever decide to go bigger?
@eddie.ls.c1032 жыл бұрын
I need help I was mudding water knee high I got stuck then my 2022 Honda foreman 520 turned off. There was no water in oil no water in gas tank no major water in air filter. Spark plug is good what can it be
@NoSend9017 ай бұрын
Tilt sensor activating?
@4968Pete3 жыл бұрын
Would a weak fuel pump cause under water idling issues?
@rednecksdoitbetter4913 жыл бұрын
How do you know it’s the pump
@misaelsoler7093 жыл бұрын
No don’t see why it would.
@NightHawkRIP3 жыл бұрын
Could you get a fuel controller with fuel maps for mixtures that would help it idle under water?
@MudPuppyOffroad3 жыл бұрын
I've tried that did not have good success on the newer models
@NightHawkRIP3 жыл бұрын
@@MudPuppyOffroad gotcha
@NightHawkRIP3 жыл бұрын
In that case I won’t put one on my 520. Thanks
@jacksonboler39053 жыл бұрын
Wut is the biggest Aztex I can fit on a strat axle Forman 520 I have a 2 inch lift and a chip but I drive in thick clay mud I don’t know wut size I need
@flbassmaster55513 жыл бұрын
I wouldnt go any bigger than a 28 of your not going to do a gear reduction but if so 29.5 or bigger
@stonewintjen5053 жыл бұрын
When did fourwheelers change to the point that you can’t just screw in a screw on the carb
@MudPuppyOffroad3 жыл бұрын
When they stopped having carburetors...
@thefloridaman23483 жыл бұрын
how do you like the motohavoks?
@MudPuppyOffroad3 жыл бұрын
Decent on sxs
@threewheelerboyz57713 жыл бұрын
🤘
@MrSteve85113 жыл бұрын
What if the whole problem is simply a back pressure issue? Vs a sensor problem??? How do you change the exhaust so less water pressure is going against the exhaust... smaller pipes allow some kawasaki engines to run under water and duals kill it. Just my 2 cents. Great video.
@MrSteve85113 жыл бұрын
And the more I think about my Honda Rubicon 500 has run -15 with no problems... even is some water slowing walking up the exhaust could steam the combustion causing problems??
@MrSteve85113 жыл бұрын
And... I wonder if a venturi inserted in the exhaust which would speed up the gases and fix this?
@kanemullins94953 жыл бұрын
I want this bike if you ever sell it!!!!
@highlandsoutdoors20412 жыл бұрын
O2 Sensors are only resistors ,, all that is done is they matched up the plug soldiered in the correct tolerance resisters melted plastic over it all and called it a o2 delete
@logantito3272 Жыл бұрын
what i do is i turn the throttle cable tension up and that turns it up
@codypruett97273 жыл бұрын
Why don’t you like stall kits for Honda’s???
@MudPuppyOffroad3 жыл бұрын
They make the machine very hard to control in a lot of different situations. They increase clutch wear. And they add a little bit of stress to the rest of the drivetrain
@cadentolliver22153 жыл бұрын
I have a 98 foreman and it has no problem underwater so idk if it cuz it’s an older bike or what
@cameronthomas77482 жыл бұрын
This bike is not carburated like the older ones. This is fuel injected
@flbassmaster55513 жыл бұрын
Why dont you just turn up the idle on the cable line on the bar?
@mudwalker52093 жыл бұрын
You got some motohavoks Thoes are nice
@grantjeansonne64563 жыл бұрын
Where is the talon
@DieselSmokenFool3 жыл бұрын
Would it work to turn the idle up
@MudPuppyOffroad3 жыл бұрын
There is no idle adjustment
@flbassmaster55513 жыл бұрын
@@MudPuppyOffroad yes there is its on the handle bars
@tristonbrannen38043 жыл бұрын
Aye mud puppy there is a idle screw on your handle bars
@MudPuppyOffroad3 жыл бұрын
Bypassing the idle air control is not the right method
@MudPuppyOffroad3 жыл бұрын
That is cable free play adjustment
@scottishmudders83573 жыл бұрын
We solved ( kinda ) this issue lol check out our brand new build spoiler alert we run air and exhaust snorkels but we go deep and we are on tracks so we can’t float
@loganpait37293 жыл бұрын
Did you ever sell the can-am ?
@loganpait37293 жыл бұрын
The 570
@thefloridaman23483 жыл бұрын
sorry not him but yea it was long gone
@bossfataxel6403 жыл бұрын
That’s y I hate electronics y can’t it just have a carb on it just turn the idle up with a screw driver and ur set 😂
@pacesends25213 жыл бұрын
Just idle it up at the throttle the snallest bit thats what helped mine
@MudPuppyOffroad3 жыл бұрын
Not the way to do it it changes when you steer and when the cable wears
@MudPuppyOffroad3 жыл бұрын
Usually makes it hard to shift
@pacesends25213 жыл бұрын
@@MudPuppyOffroad yeah true
@pacesends25213 жыл бұрын
@@MudPuppyOffroad and do you think a honda rubicon would turn 33 aztecs with 35% reduction
@blakemarkin97833 жыл бұрын
So is it me or did you just prove that O2 deletes are shit and we're back to square one on idling underwater?
@taylorwyant82313 жыл бұрын
Without saying it that's exactly what he done
@Ace-bk9yg3 жыл бұрын
6 let’s gooooooo
@hvac402 Жыл бұрын
Why not just buy a boat?😊
@MudPuppyOffroad Жыл бұрын
Man what an original comment you're the first person to ever post that on this page! Thanks for the brilliant idea