Honda electric shift sticking going half way won't shift back only forwards ! Fixed !!!
Пікірлер: 74
@albond11 Жыл бұрын
I just took mine apart and cleaned it and regreased it, shifts great , thanks 🍻
@albond11 Жыл бұрын
Wheeler is a 2003 trx 350 ES foreman, it was struggling to change gears, especially when cold, would slowly get slightly better to shift, but also would trigger something and then gear indicator would flash. Just took it for a little rip and working good 🤞🏼🍻
@WaldensWorld Жыл бұрын
Love to hear it whoooo yes !
@zaxfourtrax3 жыл бұрын
“There’s that cat that ate that sandwich 😂🤣🤣🤣”
@WaldensWorld3 жыл бұрын
Don't leave your food un attended . Them cats will take down a small cow if provoked ! Lol .
@davidchapman7113 Жыл бұрын
I don’t mind the animals unlike dude below me and it helped me a lot.my shift motor was completely different.wish I could show u what I had to do but the brushes came out and was no way to get them back in aside from using paper clips poked through the plastic housing,jammed in front of brushes to hold them in so I could position the shift motor back in place then pull pins out slowly so brushes set correctly.but my gears in there were awfull too.thanks for the video
@WaldensWorld Жыл бұрын
People like yourself is why I do the videos! Thanks for the thanks n hope your good to go !
@fiske74Ай бұрын
Gonna give it a try got a used one I’m replacing parts on and this could maybe fix this one issue I have too Thanks
@patrickboal8486 Жыл бұрын
Inside these control motors are brushes. A lot of you guys issues are most likely the brushes pull it apart the one we just messed with today had no springs behind the brushes forcing them outward to make connection. If no spring behind them toss a spring in there of some sort we used a spring from a lighter for the time being but it worked and now shifts
@WaldensWorld Жыл бұрын
lol we’re the heck the spring go ? Was someone already in it before or it detirate?
@arkansasoutdooradventures4933 Жыл бұрын
2010 rancher electric shift. Shifts through all gears fine if you’re stopped but if you get on it it will go from 3-5 or shifting down it goes from 5-3. Only when going kinda fast.
@WaldensWorld Жыл бұрын
There is a shift sensor it may be the issue but I’ve not ran into that issue the worst would be internal shift fork bent ! Hopefully it’s sensor ! There is a shift star somewhere too that it pops into to stay in gear ! But I’m not sure !
@bretbyer10483 жыл бұрын
Work excellent for me, keep making good videos. Thanks
@WaldensWorld3 жыл бұрын
Good to hear n thank you for the response !
@artbjerken85123 жыл бұрын
Your cat& dog really helped your video.stick to the point!!
@oqvirtuoso22683 жыл бұрын
Hey he’s just making some helpful videos with a few animals don’t need to be mad
@davidgrant23494 жыл бұрын
I had my shift motor apart. your motor and under body was quite dirty. my inside after dropping the motor was spotless.
@WaldensWorld4 жыл бұрын
That's cool . This whole quad had dirt on it . I guess my buddy rides his . They get dirty . N blow up n pop tires ECT thanks for watching
@johnwudarcki93153 жыл бұрын
Except a "GOOD" Mechanic would wash it to avoid dirt getting in
@WaldensWorld3 жыл бұрын
By all means take your stuff to a good mechanic please ! Pay that bill !
@hattersequiptmentrepairllc46613 жыл бұрын
What an idiot. Keep doing good videos Walden!
@EXDAMDEM3 жыл бұрын
@@johnwudarcki9315 If you know a good mechanic ... maybe you should go to work for him washing his work ... lmao!
@Bob-gn8ph3 ай бұрын
Thanks ❤John 3,16 ❤
@blairkrutkewich8264 жыл бұрын
At 4:17 you said “oh gotta put it back into default because it is unhooked” what exactly do you meant by that? I have taken my shifter motor off and I’m wondering if I have to be in default or whatever you were saying to make it work. Thanks
@WaldensWorld4 жыл бұрын
Turn it off n wait minute for flashing on cluster to stop . Or did connect battery . It should reset if I remember correctly
@ministrydrummer Жыл бұрын
I have an 03 Honda Foreman 500 and it is stuck in 4th. Replaced shift sensor. Didn't fix the problem. ??
@WaldensWorld Жыл бұрын
Does it have the manual shift lever and will it shift with it ? The shift motor may need new grease it turns to tar n will cause hard shift ! Also do you have a good battery double check these will not shift with a low amp battery even if it reads 12 volts may be weak !
@wayloncourvell67193 жыл бұрын
4:24 - my motor is not responding when I do that. 1998 foreman 450 es Battery is good New control motor, New angle sensor, Both hooked up. Machine turned on I've got a multimeter but do not fully understand how to use it. What is my next inspection step. I cannot figure out how to use the multimeter to check the shift switch out the control and angle wires
@WaldensWorld3 жыл бұрын
You may need volt meter to check current ! If it don't move at all ! May have bad shift switch !
@WaldensWorld3 жыл бұрын
Put volt meter in DC Put both end in shift motor connection hit shift button check for 12 volts
@lisaharper25603 жыл бұрын
So we accidentally got our 500 rubicon under water now it sounds like a grind when you put it in gear. Also we had extra motor and trans that we knew worked so we just swapped them out and it does exactly the same thing so what could be the issue. We're lost..
@WaldensWorld3 жыл бұрын
I’d check that your wheels are not stuck like brakes full of mud or diff case going out ! Sound like strain on either motor so I’d look at the rest of it ! Had guy bring one while back thought tranny was out nope back brakes locked up real good !
@TalksWithRyan2 жыл бұрын
There’s probably something lodged somewhere if they both have the same noise it must not be from the engine itself
@WaldensWorld2 жыл бұрын
When back hand brake cable sticks the lever itself will flop with play a bit usually because the cable got pulled n didn’t retract to give tension on the lever
@kylekill495410 ай бұрын
And the water accidentally jumped in front of you 😮
@thecrittergitter75763 жыл бұрын
I have a cat just like that. I call him Fat Boy Shadow Dude
@WaldensWorld3 жыл бұрын
These cats are like raptors ! Lol just wish people wouldn’t drop them off in my neighborhood ! My pit bulls made friends with them uhgg !!
@christopherstevens56033 жыл бұрын
My rincon 680 shifts down from 3rd to 1st even in manual any suggestions
@WaldensWorld3 жыл бұрын
Mabey your shift selector or gear selector sensor is bad I don’t think you can shift two gears on one shot so I think it may be closer to wiring and gear sensor !! You say this because it says it on digit display ! Shift manual n check that all gears are there then check the cluster to see if it matches
@christopherstevens56033 жыл бұрын
@@WaldensWorld I’m sorry I worded that poorly it will shift to whatever I want in manual but after about 30 seconds it goes in to automatic and won’t go above 1st gear
@christopherstevens56033 жыл бұрын
@@WaldensWorld also thanks for the response
@WaldensWorld3 жыл бұрын
@@christopherstevens5603 have you removed the front shift motor n the sensor next to it ! There is a sensor next to it also ! I’d remove both check sensor plug clean the grease off the shift motor n replace it ! Also you do have good battery n good ground
@christopherstevens56033 жыл бұрын
@@WaldensWorld I will try the sensors and yes I do have a good battery and a good ground just replaced both of those about six months ago i’ll try to do it tonight and let you know tomorrow thanks again
@burnthepoliticians3 жыл бұрын
My 1999 foreman 450 es wouldn’t shift properly or even make the sound, was stuck in neutral. Let it run for 10 minutes and tried shifting and it was fine. Only plays up when it’s cold
@WaldensWorld3 жыл бұрын
It's an electronic sylionoind so mabey a low battery would cause that too ! Volts n amps !!! But hay as long as you can ride that's what counts !
@KirkA09063 жыл бұрын
I have one doing that. Won't shift when you first start it. Have to manually shift to N so it will start. It will shift UP but not DOWN. Reached Angle Sensor but that didn't help. Voltage is good.
@headpainter12 жыл бұрын
Here's my story with the 99 450es. I finally found my problem after a couple years trying to deal with it. Pulled gas tank off to route a shift bypass cable because I had had enough! Under the tank there a group of wires grounded with a bolt through an eyelet. My bolt was several threads loose. That's why it would work sometimes and not others. Tightened bolt and wala, it works. I also would note it had some rust on it, so it's worth looking at. Good luck guys!
@WaldensWorld2 жыл бұрын
Thanks for the info good information dang bad grounds are tricky to find
@muthatrucka762 жыл бұрын
I love the "Honda shift" these folks put.....Like they are all the same .
@cb4lk5253 жыл бұрын
Mike bike wont shift out wen its n last gear ! Whats the problem & its electric shift
@WaldensWorld3 жыл бұрын
Either weak batter electric shift motor or bent shift fork !
@tommycox94114 жыл бұрын
Couldn't hear half of what you were saying.
@WaldensWorld4 жыл бұрын
Hopefully you heard the important half then !
@tipatlittle26023 жыл бұрын
@@WaldensWorld hahaha good reply Thanks for the tips I thinks it should get my shifter issue fixed
@frankiethompson85684 жыл бұрын
Where do I by the head for elc shifter
@WaldensWorld4 жыл бұрын
Prolly Honda
@luisergon4 жыл бұрын
El gato de mierda no te deja ver ni un carajo.
@daviddelburgo64684 жыл бұрын
Ii chsnge my ddi an now my atv don make the cheef
@WaldensWorld4 жыл бұрын
I'm not sure what you mean ? U changed cdi ? No spark idk