Morris Minor - Welding Work & Future Plans

No video

Morris Minor - Welding Work & Future Plans - Project Daily Drive #11

Рет қаралды 5,054

Күн бұрын

My friend Astral forced me to use this thumbnail against my will.
Link to Morris Millenium - morris-minor-m...
TipJar - ko-fi.com/thef...
In this episode we go into detail about all of the welding that Jean has gone through in the two months she has been away. There was so much work done that the car is basically new underneith and I have lots more to do to make her roadworthy! Massive thanks to Morris Millenium who did the welding work and did an incredible job as well.
Follow me on Twitter - / thefatfrier
Discovery Hit by Kevin MacLeod
Link: incompetech.fi...
License: creativecommons...

Пікірлер: 43

@craigpests_channel 4 жыл бұрын

Finally! I've wanted more of this so much that I went out and bought my own minor

@thefatfrierunleshed 4 жыл бұрын

Oh blimey! Best of luck to you with your moggy

@craigpests_channel 4 жыл бұрын

@@thefatfrierunleshed thanks. It's a 1959 2dr saloon. Here's a video of the car kzfaq.info/get/bejne/mbl3ldyI3dKXfac.html I was wondering if you could also subscribe to my channel? It would be greatly appreciated

@roverben5251 4 жыл бұрын

Glad you have Jean back have been doing mine up for a year now.they have done a great job.keep up the good work take care ben

@thefatfrierunleshed 4 жыл бұрын

Ah thank you. Best of luck with your moggy

@timchilds6071 3 жыл бұрын

Loving the whole series. New Minor owner myself - your series is giving me confidence to get stuck in.

@thefatfrierunleshed 3 жыл бұрын

Good luck! Im glad that this series can help you! Get stuck in, theyre great fun cars

@antonyspencer6619 4 жыл бұрын

Iv been on mine 6 years I do it when I can ,money and time never go hand in hand ,its been my mental health saviour ,If i get bored of it i walk away for abit then start again when i can be arsed ,also no garage so depends on the weather ,anyway keep ok keeping on all the best n thanks for the videos 😁

@thefatfrierunleshed 4 жыл бұрын

Ah. Good luck with yours! Its always rewarding working on a classic

@FMuscleZ28 2 жыл бұрын

The wiring is the only major job I did on my 53. I looked at that same spot out of the firewall, and just decided to throw the side cutters at it right there and then. 8 wires needed in the back and 9 in the front including fog lights and spot lights. Also added fuse and relay boxes.

@andrewnelson6183 4 жыл бұрын

Great to see the car back, enjoyed the video, looking forward to the boot repair the boot on my Morris is in similar condition. Keep the videos coming

@kathrynparsons3347 4 жыл бұрын

I'm really enjoying this (your) channel. Very informative and entertaining to boot. Very well done. Can't wait for more Thank you

@bobspeller2225 Жыл бұрын

Good luck with your work on the car and what is needed to be done by the welding company. (I have a similar problem with my Lancia coupe) Cheers Bob

@MrNomadnero 4 жыл бұрын

Good choice to do a full and proper resto, do it once and do it right and all that. Good luck with it.

@thefatfrierunleshed 4 жыл бұрын

Aye. Going to get her right. There isnt too much, as Ive sorted the big issues already, but im looking forward to it

@alanhoward6553 4 жыл бұрын

Ok all the very best with the restoration I’m sure you will do a great job! Years ago I bought a Fiat Amigo caravanette from a Vicar in rural west Wales months later when I jacked it up and the sills just collapsed found that he had fibreglassed the sills and filled the sills with religious newspapers the sills cost about £3 each from Fiat at that time l! Days later the engine blew up ! After renovating it I made the mistake of starting it in gear it ran straight into a steel skip demolishing the front end Happy days ! Good luck

@Des911 4 жыл бұрын

Yes a cost might help people decide whether to use your tip jar. Good to have you back though

@Ribeirasacra 4 жыл бұрын

Whist the car was bodged and took a lot of work to correct glad you saved it. Thankfully the car is a popular classic and panel work can be purchased new. Imagine if these parts were not available? You should seriously think about protecting the new panels before the onset of damper colder weather. Wax oiling the box sections is best done when the ambient temps are relatively high.

@Scrubworks 3 жыл бұрын

You can also fit a tappet chest cover with a breather if you don't fancy changing the rocker cover.

@andy40456 4 жыл бұрын

I think Intermittent wipers are a cheap and useful upgrade. You can get a variable timer online for around £20 . I kept the original switch on the dash and added an extra switch below the dashboard for the timer also you need to take a wire from the motor side of the original switch and take it through the relay switch on the timer. My car is negative earth and has a single speed wiper.

@stephenevans3824 4 жыл бұрын

hi if you dont mind what was the cost of just of the welding thanks

@oldclassiccarUK 4 жыл бұрын

Good job, keep it nice and oily/greasy underneath and it should be reet for years

@TKPETERTJE 3 жыл бұрын

Hi there. Spend the whole morning watching your video's. Keep up the good work. I'm restoring a Morris Minor Van (1971) myself at the moment. I'm doing all of the welding and straitening etc. myself. I like to replace a lot of the worn parts and did quit some upgrades like disc brakes, 5 speed gear box, PU bushes, CSI distributor and lots more. I'm pretty sure the costs will grow up to 10.000 pound. I'm curious what you had to pay for all the welding or is this a to bold of a question?

@thefatfrierunleshed 3 жыл бұрын

Because of a few reasons I havent gonei ntro the cost of the welding yet but it certainly wasnt cheap, but you get what you pay for. Im sure your van is going to be incredible once its finished, and those are sensible upgrades to go with.

@andy40456 4 жыл бұрын

I've been using waxoil for years. get plenty in the box sections it really seems to help.

@dori-brainfarts 4 жыл бұрын

-violent circus music in the background-

@thefatfrierunleshed 4 жыл бұрын

DA DA DADADA DA CIRCUS

@stevegreenwood7837 4 жыл бұрын

WHAT WAS THE COST OF THE WELDING ???????????????????????

@mickbottomley6815 3 жыл бұрын

the wiring is dead easy to do use heritage wiring harnesse there is only two fuses in the sistem all you've got to remember is make sure all the grounds are fitted to bear metal

@NomadTheProtogen 4 жыл бұрын

Are you turning this vehicle into your daily drive?

@thefatfrierunleshed 4 жыл бұрын

I actually daily drove her for about 2 years, and once restored I will be using her as my daily again.

@mickbottomley6815 3 жыл бұрын

what's happening to the canal project

@thefatfrierunleshed 3 жыл бұрын

Because of covid, we have not been able to safely work on any work parties. However we are workong on getting back to them and getting back to workong on the canal

@mickbottomley6815 3 жыл бұрын

hope so it be ashamed to let all that hard work go waste nice to see it in water lock gates on etc

@alanhoward6553 4 жыл бұрын

What a shed! a Dacia Sandero would be a much better investment for you

@thefatfrierunleshed 4 жыл бұрын

Too late, already putting the car back together

@alanhoward6553 4 жыл бұрын

TheFatFrier Productions I’ve seen better minors than that going for £15 at East Lancs Motor Auctions

@thefatfrierunleshed 4 жыл бұрын

Alan Howard ah you see, there's the problem. I ain't got £15 left in my wallet

@Nureon9 4 жыл бұрын

The feeling of giving some tlc to the things you love and enjoy though, priceless.