Mortise And Tenon Joint By Hand - Table Apron (2020)

Рет қаралды 455,475

3 жыл бұрын

Mortise And Tenon Joint By Hand (2020). In this video Rob Cosman teaches you how to cut a mortise and tenon joint by hand. Using traditional hand tools and techniques Rob shows you all his secrets to using the traditional mortise and tenon joint to connect an apron to a table leg. Mastering the mortise and tenon joint by hand tools is a critical skill for both the professional and hobby woodworker.
----------
If you like our content please LIKE us, SUBSCRIBE to our KZfaq channel, and RING THE BELL to be notified whenever we release a new video.
_______
* VIDEO SECTIONS
3:07: MORTISE & TENON TOOLS
7:23: LAYING OUT THE JOINT
18:18: CUTTING THE MORTISE
34:33: CUTTING THE TENON
51:20: FITTING THE JOINT
* ROB'S ONLINE WORKSHOP - robcosman.com/pages/rob-s-onl...
* SUBSCRIBE TO ROB"S MONTHLY WOODWORKING TIPS NEWSLETTER - lp.constantcontactpages.com/s...
* QUESTIONS - Have a question about the Tools, Techniques, or Anything Else you saw in this video? Post your question in the comments section of this video!
* VISIT OUR STORE - To learn more or purchase any of the tools you saw Rob use in this video, please visit our retail store at www.robcosman.com
* SUBSCRIBE TO ROB'S KZfaq CHANNEL - / robcosmancom
* LEARN ABOUT ROB'S PURPLE HEART PROJECT: robcosman.com/pages/php-what-...
* DONATE TO THE PURPLE HEART PROJECT: robcosman.com/products/how-to...
* FOLLOW US ON SOCIAL MEDIA:
FACEBOOK - / robcosman
INSTAGRAM - / robcosman_handtoolwood...

Пікірлер: 413

@tommcnally3646 3 жыл бұрын

This is so informative, it's rare to see a great craft person be able teach so well

@ottomaselli7762 3 жыл бұрын

I admire the amount of detail you put in every procedure description. It shows the Love you have for woodworking. You are a great teacher. Please keep making theese videos !!!!!

@RobCosmanWoodworking 3 жыл бұрын

If you keep watching and commenting we will keep filming

@matthewthompson6719 2 жыл бұрын

I agree. The level of detail is great, and it's rare. Great job, Rob.

@ryanlemons7831 2 ай бұрын

Best I can tell by everything I’ve seen on the KZfaq is be it dovetails, mortise and tenons or any other joint- if they are created by machine they are loose fitting and practically useless. It’s amazing to me how many people think that glue can compensate for a loose joint. The only successful machine made joints I’ve seen done were only accomplished because the craftsman made the tennons intentionally a hair over sized and the mortises a hair small and use hand tools to sneak up on the fine tuned fit by hand. Same with other joinery types. I’m so happy that thanks to men like Rob and many many others have really revived the traditional hand tool woodworking.

@lencranston8183 3 жыл бұрын

Your videos are so well done and informative. Thank you for sharing your skills and knowledge with us, Rob.

@polenick 3 жыл бұрын

What a masterclass. Thank you!

@Stelios.Posantzis 3 жыл бұрын

I haven't seen a more masterful carpentry demonstration than this as yet on youtube. A veritable master craftsman's course!

@Mr_Rick 3 жыл бұрын

What a pleasure Rob. Very much enjoy & appreciate all the sharing you do. Especially every detail and nuance. Thank you.

@donniecatalano 3 жыл бұрын

Absolutely beautiful, as I'm a beginner, I'm fascinated. Thank you

@jsimon179662 Жыл бұрын

You describe all the details that make all the difference. One of the most professional “ teachers “ out there. Thank you!

@ForestWoodworks 3 жыл бұрын

A rare video that I came back to in the same evening after needing to break for a bit. I then went to your Website and saw the words Peace and Joy there on the landing page. So exactly the sentiment as to why I am learning to be a woodworking craftsman; It brings me peace and joy to build beautiful things and to take my time with the details. Extremely satisfying! More so than Slime Falls ;) I mirror other commenters that this instructional video will be my go-to. And now it has a designated playlist. Thank you for this masterpiece of craftsmanship. I have bookmarked your Website as well. Have a good one and take care!

@davidkoba 3 жыл бұрын

I have been a union carpenter for over 15 years. Finally started to get into wood working. Thanks to you I have been recently getting into hand tools. The satisfaction of using hand tools is incredible.

@thehowlandworkbench5849 Жыл бұрын

Thank you for this video. Your explanations are detailed and precise, and your delivery is well paced with the camera work. The result is that we feel as if we are privy to your thought process at the precise time you are working on any part of a procedure. We can see the why as well as the how, and at the same time. You are a great teacher!

@2bmade-projects594 2 жыл бұрын

Thank you Rob. Your a fantastic teacher!

@milosgrujic9118 2 жыл бұрын

Very encouraging seeing how with basic tools you can make something great as this joint. Thanks!!

@cuebj Жыл бұрын

We mitred the tenons when I was at school from 1969 to 1972. Sitting by a coffee table chess table I made in 1970 with that method. Won the school woodwork prize and selected Lord of the Rings (three hardback books) from the options offered. Still got them too

@bubba8 3 жыл бұрын

Such diligence and attention to detail. Excellent craftsmanship

@TWC6724 2 жыл бұрын

Thanks for this video. You are more detailed than a lot of woodworkers and it shows in your work. There were several things I learned in this video that I haven’t seen before I’m going to apply to my technique. Appreciate you and your time Rob.

@WolfinWolvesClothing713 3 жыл бұрын

Just getting into woodworking a little more seriously. You've been a great teacher so far. Today I learned it's dumb to touch the sharp part, 😄 and don't slap my gauge off the table. Seriously though I appreciate it when someone has a passion for doing things right. Keep em coming, maybe by the time I retire I'll be building something I can sell. P.s. I meant the great teacher part. Thanks for sharing.

@ww89 2 жыл бұрын

Can't belief making mortise and tenon can be so precise, thanks for this excellent video!

@manuzach 3 жыл бұрын

So good! Held my attention for 60mins!

@davehumphreys1725 3 жыл бұрын

I enjoyed your video. Nice to see an expert fixing problems on the fly, as they occur. Thanks.

@markvogt9462 3 жыл бұрын

By far the best woodworking channel on KZfaq. Rob Cosman is the GOAT!

@GARDENER42 2 жыл бұрын

I think this video has done more to give me the confidence to raise my game above basic "wood butchery" than anything else. Many useful tips on how to accurise sawing & using chisels to create clean, well fitting joints. Thanks from the UK.

@nikoscuatro7251 2 жыл бұрын

Thanks a lot!, This helps a lot to understand all the process, and seeing how works a true professional and teacher.

@bobbramlett1678 3 жыл бұрын

Thanks for your service, thanks for sharing your knowledge.

@jackleg693 3 жыл бұрын

I’m brand new to woodworking so these videos are exceptional for learning from all your years of experience! Thank you for sharing these. I seriously need to expand my chisel range.

@charlesdall8165 2 жыл бұрын

Very good thanks

@discipleofjesus253 3 жыл бұрын

I don't want to puff you up with pride, but what a great craftsman and teacher you are. I thoroughly enjoyed watching. Thanks

@Polish2317 Жыл бұрын

Thank you for the attention you give our heros.

@gilbertomanzanilla4333 3 жыл бұрын

A 58.38 mns worth to watch it to the end, thanks rob for putting great effort and time on teaching us, you realy are our woodworking couch💯

@RobCosmanWoodworking 3 жыл бұрын

Thnaks for your support

@lonniecrook1684 3 жыл бұрын

Sure wish I had watched this a week ago. Now I see I have much cleanup to do on my mortises before cutting my tenon's. Great video, great technique, as usual.

@ThatNinja1 3 жыл бұрын

It's all most impossible to stop myself from blowing the wood away along with Rob lol. All woodworkers should understand my plight.

@RobCosmanWoodworking 3 жыл бұрын

blowing or bleeding?

@ThatNinja1 3 жыл бұрын

@@RobCosmanWoodworking blowing of course

@WolfinWolvesClothing713 3 жыл бұрын

😄

@WesleyBrace 3 жыл бұрын

Great video. I picked up several useful "tips" in this tutorial. Thanks!

@jamesomalley4257 3 жыл бұрын

Great instructions. Now I just need a router plane, mortise chisels, a better workbench, more saws, etc.

@dominicc3521 3 жыл бұрын

You can use a normal chisel, works fine as wine. A very good stable levelled workbench is beneficial and crucial though.

@jamesomalley4257 3 жыл бұрын

I made a slightly smaller version of that table. I used my regular chisel to chop the mortise. It works but takes a bit longer. I have since acquired a mortise chisel and appreciate its value.

@micdiva 2 жыл бұрын

@@jamesomalley4257 don't know if you've bought his saws but I wouldn't. In my opinion there's much better and cheaper options out there

@keithscriven724 2 жыл бұрын

@@dominicc3521 àà q

@ARMYStrongHOOAH17 2 жыл бұрын

You just don't get it do you? 🤦‍♂️

@byronforehand 2 жыл бұрын

Bring new to woodworking its great to come across such a wonderful teacher. I never knew there were different types of chisels - a chisel was a chisel was a chisel I thought🤷‍♂️

@JDDupuy 3 жыл бұрын

Hand tool Master. Outstanding teaching video. One of those times where folks will never see your work but will enjoy the strength and longevity of your work. If only they knew the amount of effort that goes into the joint. Great video work by your camera person! Excellant gluing tip on chamfering the tenon and where to put the glue.

@RobCosmanWoodworking 3 жыл бұрын

Wow, thank you. Appreciate you watching and commenting

@dkbuilds 3 жыл бұрын

Great video! Great length, perfect amount of editing, incredibly informative. One thing I personally picked up on was the grip of the board against the back of the bench hook, allowing the left index finger to be free to still guide the saw. I wouldn't have thought of that. Thanks for sharing!

@RobCosmanWoodworking 3 жыл бұрын

Glad you picked up a useful tip.

@lakshmikpunugu4735 3 жыл бұрын

A very interesting presentation, A professional, very detailed, text book presentation with great patience..I felt as if I did the job...Many thanks for the morvelous work. 🙏🙏🙏

@fredhermann9717 3 жыл бұрын

Every single one of your videos has good instruction and small gems that are priceless. Marking only one dude of the mortise and drawing perpendicular lines is one of the gems. Right after watching I sweat to the shop to experiment. Worked like a charm. Thank you

@RobCosmanWoodworking 3 жыл бұрын

I am so glad you find my videos useful. Keep watching and I will keep filming

@alecreid9983 3 жыл бұрын

What a great lesson Rob, really emphasises the importance of SHARP TOOLS, the little bits that you are shaving off with ease is amazing👍

@RobCosmanWoodworking 3 жыл бұрын

Sharpening is the most important skill for the hand tool woodworking

@r.parker1933 3 жыл бұрын

I really wish I'd watched this before cutting several sloppy mortises on a couple projects this year. Really good stuff. Thanks!

@jimmys511 2 жыл бұрын

After hearing about the work you do for veterans I have subscribed to your videos but after watching your videos there is no one else to watch because of your skills.

@leeackerson2579 3 жыл бұрын

you are one hell of a teacher, thanks much for a great video.

@jwgolfnut Жыл бұрын

Rob, you make it look easy. Great informative video. I’m glad even a professional like you still has to put on a band-aid now and then. I usually have some sort of band-aid on my finger all the time. 😂. I’ve been a cabinet maker my whole life (63). And I wish I could have watched your videos 40 years ago. It’s pretty easy making furniture with high tech machinery, it’s so much more enjoyable to do it all by hand. Keep up the great work. Your the best out there.

@tomgazebobob1503 2 жыл бұрын

That was enthralling. You come across as an ok person. Thanks

@jeffbourne6015 3 жыл бұрын

Another superb instructional video detailing many tips and techniques to get precise mortise and tenon joints - explained clearly and simply as usual and combined with great close up camera shots. The use of ruling parallel pencil lines as a guide perpendicular to the single scribed mortise slot line was a simple and great tip to ensure accuracy when chopping out the mortise. Equally, the different strategies for sawing the tenon cheeks accurately we’re great too. Thank you Rob and TEAM COSMAN - a LONDON based permanent Cosman video viewer!

@RobCosmanWoodworking 3 жыл бұрын

Glad you liked it and rhanks for watching

@kennethrutledge9222 2 жыл бұрын

Wow !! I like your style !! Very Presice !! I get the jointery you're doing but its your bench that I love !!! I've just decided what bench ill build !! Thank you Thank you for your time !!!

@joehirschegger7723 3 жыл бұрын

Very informative, as always. Thank you Rob and Jake.

@RobCosmanWoodworking 3 жыл бұрын

And I added blood as a bonus!!!

@sreedharanbhattathiripad8656 3 жыл бұрын

very very interesting and detailed demonstration step by step. Checking by a lens is quite wonderful.

@manuzach 3 жыл бұрын

i think this video inspired my "learn M&T" as a new year resolution...i want to get a Domino machine later in the year but this will be my go to video for invaluable theory!

@quamrulahsan335 Жыл бұрын

very precise working!! Amazing..

@jimtrebes7926 Жыл бұрын

Wow what a fantastic video! Thank you.

@MrPJM22 3 жыл бұрын

Great tutorial, Rob. I’ve done many by hand, but your method and tips will certainly lead to better results. Thank you.

@RobCosmanWoodworking 3 жыл бұрын

gald you found it useful

@mikaelfischer8429 3 жыл бұрын

Really enjoyed the video, great instructor Sir.

@devmatharu8002 3 жыл бұрын

Too good brilliant workmanship

@sacrajah Жыл бұрын

This is excellent technique for making a mortice and tenon joint.

@davidcampbell2845 3 жыл бұрын

Exceptional instruction. Craftsmanship demonstrated with style.

@RobCosmanWoodworking 3 жыл бұрын

Thnaks. I hope it gave you some tips

@FauxtakuLounge 3 жыл бұрын

This is seriously good stuff. Thank you.

@brucekokkinn6347 3 жыл бұрын

Inspirational, detailed and fantastic!

@RobCosmanWoodworking 3 жыл бұрын

Thanks. What video should we do next?

@danielcaputo1975 2 жыл бұрын

Thank you for the video!

@garyhome7101 3 жыл бұрын

Superior video! Excellent instruction step-by-step! In my attempts at mortising, I really have to work on keeping my chisel plumb, and often end up making a gauge to help. I don't have specific mortising chisels, but hopefully will have soon! Thanks for this video Rob!

@RobCosmanWoodworking 3 жыл бұрын

regardless of what you see on some other KZfaq channels, a mortise chisel REALLY helps in cutting mortises. We have a mortise chisel comparison vidoe coming soon

@austinrhoads 2 жыл бұрын

This guy is the best!

@omerofaggionato4405 3 жыл бұрын

Your way of working is really amazing

@MrBillUp Жыл бұрын

Really nice job Rob.

@edwardoneill4080 7 ай бұрын

Excellent instruction video

@johngunning2123 3 жыл бұрын

You certainly make it look easy. I love the quality of your hand tools and how sharp they are. Oh for a workshop like yours.

@RobCosmanWoodworking 3 жыл бұрын

Well you dont really need a workshop like mine. No power tools used on this joint. Juts a few premium tools and a good bench is all your really need.

@paulkarch3318 3 жыл бұрын

I learned a lot from this video. Very clear and understandable.

@RobCosmanWoodworking 3 жыл бұрын

Glad to hear it! Thanks so much for watching and commenting

@andrewbrown8148 3 жыл бұрын

Great instruction~! Watching you go thru the process makes me want to retire my dedicated mortiser and do mortises by hand. Time to practice~! Thanks, Rob~!

@RobCosmanWoodworking 3 жыл бұрын

You can do it! Grab that chisel and mallet

@simonablett8613 3 жыл бұрын

An awesome instructional video, as always.

@RobCosmanWoodworking 3 жыл бұрын

Glad you liked it! what video should we do next?

@toddgrant4268 3 жыл бұрын

Sir I love the way u teach it fits the way I think.

@alimaleki217 3 жыл бұрын

Rob displays his incredible skills again! If that’s not enough he bleeds for his craft!

@RobCosmanWoodworking 3 жыл бұрын

I will do anything for you guys entertainment!!!!!!

@LeavirtuS 2 жыл бұрын

Nice project! Thanks for the enjoyable, instructional video!

@sandromor2007 2 жыл бұрын

Great again and again

@edmcgugan2079 3 жыл бұрын

30 year old chair that has been stood on and piled on? Looks pretty goòd! Good joinery. Excellent video. Nice and clear. Thank you.

@user-qg6fy4yp8t 3 жыл бұрын

Thanks for another knowledgeable woodworking class!!! take care

@RobCosmanWoodworking 3 жыл бұрын

Thanks for watching!

@KennethColeStatenIsland 2 жыл бұрын

Outstanding. Ty

@roberthamm1495 2 жыл бұрын

LOL This great how to work after an injury. I'm needing this video.

@TonKuipers134 2 жыл бұрын

Thx. a very good tutorial. I learned some of the work in another way but I am going to practise the methods that have explained in this video.

@SkylersRants 3 жыл бұрын

Well done, thank you.

@BeADad2447 2 жыл бұрын

There will never be an app for this! Mad skills partner!

@timber7744 2 жыл бұрын

Fantastic.

@robertbamford8266 3 жыл бұрын

Delightful. Thanks.

@markmywords519 3 жыл бұрын

Thankyou. I inherited some old furniture and it is sooo beautifully constructed and solid in th ejoints. One reason why it lasts 100 years, my sons can't cope with the time it requires coz they say its not profitable. Hmmm skill loss and impatience is our future sadly. great video.

@rossgebert9422 3 жыл бұрын

Great video, Rob. Thanks.

@RobCosmanWoodworking 3 жыл бұрын

your welcome. Thnaks for watching

@libork8106 3 жыл бұрын

Great workmanship ...

@dukeengine1339 3 жыл бұрын

This is something!!! Thank you master for the lesson!

@RobCosmanWoodworking 3 жыл бұрын

Glad you enjoyed it! what video should we do next

@dukeengine1339 3 жыл бұрын

RobCosman.com you teach a lot to a lot of people. One time it should be all this people to show back what they did with all your videos. I think it would be good to receive shots of their works inspired by you, collect them and make a video where you show their pieces and comment them, like “that’s good, here he could have done better this or that, this other is perfect,...”. What do you think?

@johnjones291 2 жыл бұрын

You are so blood good thanks for your time I really appreciate it have a good one

@drDAKOTABOOZER 3 жыл бұрын

Rob Cosman might be the wood working god

@rpoolcode 3 жыл бұрын

PRECISION. My word of the day 😁

@chimodual 3 жыл бұрын

Numero uno!

@craigbowman1656 3 жыл бұрын

really great, thanks Rob!

@RobCosmanWoodworking 3 жыл бұрын

Thnaks for watching

@ibrahiymghany5144 3 жыл бұрын

Love it. Thanks bro.

@kennethlemke9826 2 жыл бұрын

Excellent

@MrDCritch 3 жыл бұрын

Thanks again Rob, very informative. I’ve learnt so much and improved with every project following your Videos , this one will help with dining table legs next on the go for Xmas. Looking forward to receiving my crosscut saw and of course big bottle of maple syrup soon. Cheers from a Scotsman living in Australia, with a bit of Newfie in me grandfather was from Newfoundland.

@RobCosmanWoodworking 3 жыл бұрын

Great to hear. So glad you found this video helpful. Thanks for watching and supporting our store

@martyn1678 3 жыл бұрын

glad iam not the only one that drops tools, awesome video id love to work with you if just for a week i think id learn alot

@RobCosmanWoodworking 3 жыл бұрын

Just opened out 2021 class schedule

@savoielvis1 3 жыл бұрын

You are a heeeell gooood teacher.....saved this videos as favorit :)

@The_Seeker_of_Truth 3 жыл бұрын

I have had no need to ever build a mortis and tenon joint, but I still couldn't stop watching to learn how!

@WolfinWolvesClothing713 3 жыл бұрын

Right? It makes me want to go make one just because. Lol.

@allanwaye1302 3 жыл бұрын

THANK YOU

@terrykizer6755 3 жыл бұрын

Perfect timing! We are building a kitchen table to hopefully be ready for Thanksgiving. Thank you!

@RobCosmanWoodworking 3 жыл бұрын

Perfect! send me a picture when you are done

@frankstover3444 3 жыл бұрын

Beautiful job Rob!!

@RobCosmanWoodworking 3 жыл бұрын

Thnaks for watching

@angrygromit93 3 жыл бұрын

I wish I could have seen this two weeks ago. Been making my duaghter a simple desk, 14 mortices, 14 tennons, the tips here could have made it go smoother and a whole lot faster.

@RobCosmanWoodworking 3 жыл бұрын

Well , I guess you could start over agian !!!!!!