Bad dude Donnie Hagar!! Green Vega goes crazy!

The patina matched wing is the icing on the cake

That fuel sump deal you guys came up with is a great idea!

This thing absolutely needs patina vinyl 632 SS stickers on the back of the bed sides!

Love it! The engine sounds super healthy! Awesome build!

It always makes me happy to see an Operator shifter! Nice work, guys

Thanks Doug great content

16:46( maybe ready to pop off) you jinxed yourself bud!!😂

Derek @VGG just did an awesome job on this truck. Im so happy to hear he will be driving it for sick week.

When putting the LS3 head on the 6.0 liter block, the head chamber is wider than the 4 inch bore. Nobody makes offset dowells to Stop the block from presenting a ledge to the incoming Air Flow, maybe you guys could pay that some attention.

Sounded Crisp Great Video

Very helpful video in so many ways

I've always wondered how a 28x10.5 would look on a OBS truck, it looks good and fits well. Would be nice to see how much frame clearance and outer fender clearance you have for future reference. I am enjoying the build. Thanks for sharing it

That sump idea is perfect for what I need!!!

This is awesome build 🥶

I wondered what happened to that truck. Glad to see it again!

Love this truck

@JimmyDaleRacing with NX is the man you need for your nitrous wants. Love this OBS content whenever y’all want to put it out. I’m ready to see this thing lift the front tires! 🇺🇸

This is a pretty cool project 👌🏻 🤘🏻

That view outside the bay door of the corn field and silo’s would be a perfect background setting for a photo shoot with the Ol OBS work truck!

My favorite truck they take a beating and still keep going. Well the stalk one that is

There's just a whole bunch of cool stuff under this pickup we'll start with the headers gas tank the whole rear end setup definitely can't wait for her first pass

Gage is a bad man behind the wheel if a bracket car. Would be awesome to see him enter the truck in a big money bracket race 😎🤓

Sounds good 👍👍

Awesome!!!!

Derek (VGG) really put the shine on this truck. Good luck at Sick Week!

You guys have a chance to make a GOOD set of ls headers for the obs. There is only two options really and they aren't that great.

Nothing to it but to do it!!

Hey I am a huge fan of everything that you build. I have also been a Motion Raceworks customer since day one. An I have never been disappointed with any of the products I have bought an if there ever was a problem your guys customer service is top notch. I would lov3 to come work with motion to tske the soical media an youtube channel I have endless experience building and growing KZfaq channels from Friends channels to my own and at the core of everything I'm a die-hard car guy a drag racer to the Core and I have a job with motion raceworks I would be so happy I would work 7 days a week 20 hours a day cuz my grandpa always told me can you find a job you love you'll never work a day in your life. Well hope this gets read

Outstanding! Glad to find out MR is still here... funny how a couple of times now... wtf? What? Notifications and sub turned out nada. On another note, love TBM! Respectfully, Seth

I totally figured about 3400lbs...awesome truck and look @ all that e-85 sitting in front of you

Hell yeah boiizzz!

I have been in the “Andy in the engine bay position” in mine more than a few times 😂

Let’s go!

More!

Orange zip ties are my favorite I would requisition a 50 pack You can make crazy cool wiring looms from them

Support

Fookin crazy awesome content AZ all g my bradas keep up the cool work ALOHA FROM HONOLULU AL MANOA VALLEY 😊

awesome video, and slick setup but your killin me smalls with "in a few weeks"

Fuckin badass Chevy truck!!! I love it!!🇺🇲🇺🇲🇺🇲💪💪💪

Please send to me in Australia!! Cheers legends

cool

I wasn’t real sure where you were then I saw the corn and knew it wasn’t Florida lol

My first vehicle was the same color but a longbed Cheyenne. It was basically a w/t. I eventually put steelies and glory rings, lowered it with side pipes, and a small block. Very fun truck, I put 5 4l60e's in it. Sold it to a young man for his first truck!!! I wanted 2k for it and after talking with him and his father I talked myself down to 900$ it was a humbling experience.

U gonna take this thing to sick summer so i can see it? Im excited to finally come to a sick event!

Obs chev now…. Maybe obs Ford next? Love the content and what you guys are doing.

Hey guys great truck! Can you please tell me who made the front wheels your using? Keep making build content it is awesome.

I was way off! My stock 95 C2500 is 4850. Good job on the weight reduction! If feel like I'm rambling now but each comment gets you like 1⅛ of a penny I heard! Have fun! Also pretty sure Gage B do something once or twice 😅

There are no box bracket guys laying down packages you can only dream of.

Plazmaman front feed intake manifold so it will fit under factory hoods.

need some svt lightning parts brother🙌🏽

Gage Burch is a baaaaaad dude. I think he could win races on a bicycle.

Please bracket race this truck!!!!!

Will the filter being mounted to the head absorb a lot of heat on longer drives? Or being billet it will dissipate fast enough?

My 1993 weighs 3900 lbs with a small block.

I have a couple ideas first if you guys don't already make them how about a Motion Raceworks blower hat and my second idea, build a Mega Truck with nothing but Motion Raceworks parts.

What is the front suspension set up on the truck? Who makes it?

Where’s the A/C and power steering for those long drives if Ricky mountain race week ?

Are those Billet Specialties front runners that match the rear M/Ts so well? What size please…diameter & width 🤔

I'm still watching but trass cooler fan a pusher or puller?

Big Block Chevrolet Power……Amen🏁🏁

Plug and Pray

Just yesterday I was thinking, what is Motion up too?

Is it not a concern mounting the fuel filter to the head and it heating the fuel itself?

*Question* I recently got a 94 mustang gt with a Vortech V2 Supercharger motor is built for it according to previous owner. However I'm noticing an odd quirk which has me concerned, it is a methanol car running on ethanol free 93 octane and under hard pulls I am getting back pressure into the catch can leading to it blowing oil out (yes I've emptied it) and it's also blown the dipstick out as well. Any and all tips greatly appreciated, I'm concerned I know what the issue is but I don't want to do what I'm sure I will

Flames out the throttle body means it's on upside-down, right? Point the fire in the engine! :p Beast mode!

Does that monster have a roll cage ? Might be necessary if it goes quicker than 9.90 , which it will ! Such a cool project, looking forward to the next installment.

What seat mounts on the stock seats? Are you still using the adjuster?

How much for the entire build if I were to buy everything you’ve done to the truck.

I have a 1992 GMC Sonoma sle. Soon make it a sleeper at least with 600, 700 horsepower to have some fun in the streets.

Lighter than I was thinking by 500 pounds

Might need to at least cut the rust off the cab corners, so it don’t shake it in front of the tire.

What happened to the yellow blazer

This truck would look sweet if you got somebody good at airbrushing put your logo on it do a theme with the patina don’t go crazy on the body

Why didnt you center the motor from the get?

Those headers are sexy looking!

I’m running a trans cooler under the car like this, do you run a temp switch on them or do you just have them wired to turn on all the time? Love the videos 👍

Can you please tell me the manufacturer of the banding table that you banded cleetus and his packs in my company has been looking for a tool like that please 🙏

Who makes the control arms?

What front suspension set up are y'all running? Id like to set my truck up the same.

I say it's going to be about a 8.50 ET

U put a 10 carrot diamond in turd good job boys

LOVIT

Idk how or when missing paint, dents, and rust holes became cool. It’s a shame to put such nice parts in a pile. Like they say - it takes all kinds

Could the fireball happened because he was pumping it like a carb and it’s a throttle body?🤷‍♂️

Maybe the half gallon of fuel that was being sprayed every time it was cracked open lol

Why would you attach the pump to a major heat source such as a head next to the exhaust poet on the head. Bad idea truthfully, and it doesn't matter if it's for just a nanosecond, it still transfers heat. Rule of thumb learned from the hvac trade, and that's the fact that cold flows to hot. Meaning that hot absorbs the cold, because cold is drawn to heat, and aluminum is a excellent source for absorbing heat transfer.

Jimmy dale can get you all of the nitrous

3470

4100

My guess was 3564. Can't wait to see it rip. 🤙

Seems that filling a trans would cause it to slow down, if the fluid is getting into all the spinning bits, lol. I’ve seen it on stock cars cause issues, but I don’t work on race cars that much. I guess if your running dumps and such it could use the extra fluid.

Not all 4500 plates will work. It's technically a 6500 throttle body. Also, tread lightly with N2O...

tried and true pump huh? 😅

You chose the wrong shape for the headers , as the engine needs a D shape, and what you used is an O shape

Someone have a extra 30K laying around so i can get one of these engines? I have a 1500 to put it in too lol

I have seen some crazy guy way south of you who lives close to a track, maybe he can pull some strings and get you guys the track time you need to dial it in. Just keep a close eye on him, he is a very loose unit...nice guy but he skids everything.....lol

I paused the video for weight. I'm going to guess 3977lb. Unpause

1 guy mounts the fuel filter to the cylinder head. Another guy primes the hell out of it when its already fuel injected. And another revs the piss out of it 3 seconds after it fires while its brand new and stone cold. Glad thats not my engine

The guy that doesn’t pay for that engine waps the throttle on first start up cold. 🤦🏻‍♂️