New Rage Cycles Fender Eliminator Kit install on a Panigale V4S. Install will be the same for the V4 and the V4 Speciale models. NRC Panigale V4 / V4S / Speciale Fender Eliminator Kit : goo.gl/Rjk5Ss www.motomillion...
Пікірлер: 79
@zeronomon6 ай бұрын
Yes! Thank you! I’ve seen so many installs that didn’t explain where the nylon washers go. Not even NRC instructions showed this. Much appreciated 👏🏻
@ashten922 жыл бұрын
That NRC just blows the competition right out of the water. It is by far the best liking eliminator on the market.
@650ib6 жыл бұрын
AWESOME video Mani!!!!!!!!!!!!!!!!!!!!! I can't wait to produce my video of the Speciale with all of your parts installed.
@Motomillion6 жыл бұрын
Thank you Ib! Can't wait to see it and hear that roaring Akrapovic exhaust!
@yeyo88166 жыл бұрын
Thats my man ib from 2010 nd his frist bmw 🔥😍loveu
@mfadz43786 жыл бұрын
Ibbbbb
@Isolationrides2 жыл бұрын
Mani is absolutely a class act. I have had issues with things purchased on installs. And he reach out to me personally to resolve any issues.
@quanremy2 жыл бұрын
Thanks for the instructional video! It always helps watching someone else do it before attempting to do it yourself.
@jasoncastle82626 жыл бұрын
Great video truly appreciate it. One NOTE: you do not need to remove the two bolts under the passenger seat. However, it was good to see what happened once I did and to know I can remove them.
@JaretCampisi6 жыл бұрын
Great video brother! Definitely do more install videos, I really enjoyed it!
@Motomillion6 жыл бұрын
Thank you, got a few of them lined up, we will upload them as we get them ready.
@jacquelinemendoza52054 жыл бұрын
WAVKL🏁🇱🇷
@ashten922 жыл бұрын
If just looks so mutch better than any other for the Ducati panigale V4.
@theozman384 жыл бұрын
That is definitely not boring taillights lol. It pops out atya !!! Very nice 👍
@ashten922 жыл бұрын
Its so mutch easier to just remove the two mounting bolts and disconnect the one conector and unbolt the tail unit and split it in half when it is off the bike.
@moun2136 жыл бұрын
Magnifique 😍😍 l'année prochaine ✌️
@SmokeNYC6 жыл бұрын
Great Video! The bike looks beautiful!
@Motomillion6 жыл бұрын
Thank you! Wait till you see the exhaust this bike is getting installed!
@jdm4lf116 жыл бұрын
That looks clean.
@kevinganser78953 жыл бұрын
Damn i just cant get mine to sit flush like that.
@oneonlyxram6 жыл бұрын
My tapered screws were actually too long and i had too get ones 1/16 shorter...
@RonnieLD36 жыл бұрын
Same
@spineface5 жыл бұрын
Thank You!
@user-rc3vw4ce4v6 жыл бұрын
Wonder did you really wear the AP while doing the install lol ;)
@SpectacularRiders8486 жыл бұрын
whoa, really cool dude 😀
@josevergara77106 жыл бұрын
the ducati v4 has a passenger seat , greetings from Colombia
@laksvlogs71516 жыл бұрын
Manny from motomillion
@Motomillion6 жыл бұрын
That is the him! :)
@Elgeomentao2 жыл бұрын
Perfect
@charliejeppe3346 Жыл бұрын
Great video! Does this and your windscreen video for V4S also apply to the SP2? Thanks!
@Vforfreedom Жыл бұрын
Even has the rain mode too where both sides flash like the hazard lights in a car
@RicViperskylogs5 жыл бұрын
Awesome vid, i assuming this should work on the 2019 V4r
@Motomillion5 жыл бұрын
Thank you, and yes, the application on the V4R should be the same.
@colinoz Жыл бұрын
I heard another KZfaqr say that this NRC product burns out over time. Does anyone follow the instructions when they install this kit? There's no need to even take the back seat off and undo those grab strap bolts. Also, those white shim washers are meant for the bolts that hold the whole kit on the bike..
@Motomillion Жыл бұрын
Never had issues. If there are any problems they warranty their products. The white spacers are for certain plate positions. We have a new updated video coming soon.
@KurtAlanSmith5 жыл бұрын
Why did you remove the seat? Not a requirement of the install.
@Motomillion5 жыл бұрын
You are correct, that had to be edited out.
@KurtAlanSmith5 жыл бұрын
@@Motomillion yeah, I am unimpressed with this part at the price point. Maybe you got a better deal than me. I didn't pay that much more for a clear clutch case and shorty levers. This piece at 100 dollars is worth it, but at 210 dollars....rubbish.
@francisv_01116 жыл бұрын
Great vid. Manny keep it up and want to see more vids. of new product on the market. By the way thanks to you, speedcell lithium 5.0 battery are awesome my bike are back in business.
@Motomillion6 жыл бұрын
You are welcome Francis, thank you for all the support. Stay tuned for the upcoming video :)
@TURTLEscooterking6 жыл бұрын
Why do i keep smelling carbon fiber and Rizoma parts?
@Motomillion6 жыл бұрын
Even more special stuff than Rizoma parts ;)
@Dub3God5 жыл бұрын
Looks great. Who rides two up on a V4? Remove those damn things. Killing me smalls.
@lizlana42003 жыл бұрын
Especially if you don’t want pussy white cream all over the seat from the panty dropper Panigale Exhaust. Wet af from such a sexy bike 🏍
@Hasan10034 Жыл бұрын
I wanted to install it so badly and it got dark that I put them on with no signals until tomorrow. Had to rush because my fiancé doesn’t know I bought a bike yet 😂
@Eric-xb4zm Жыл бұрын
That’s not where the nylon washers go
@stealthdoocatee3 жыл бұрын
Same video for the streetfighter v4s right ?
@Motomillion3 жыл бұрын
Yes sir. Extremely similar.
@GIN.356.A Жыл бұрын
5:08 how did you get the inside of the brake lights to light up too? Is that a mod u did in a separate video?
@smcromu4 жыл бұрын
Available for the new Ducati Streetfighter V4S ? What is the maximum distance between the outer edges of the 2 indicators in centimeters ?
@thienchien64726 жыл бұрын
dual saddle???
@tonyrrc514 жыл бұрын
Hey guys, I have a 2018 v4s. I installed this kit the day after I got my bike. Recently the DES lights has come on and the bike rode terrible. Brought it to my dealer, and they said the blinkers are controlled by the BBS and that’s what caused the problem. They have to replace it, and Ducati won’t cover it under warranty. The BBS alone is $500 without labor. Has anyone else had this issue? I call BS
@Motomillion4 жыл бұрын
The turn signals have nothing to do with the engine control unit and the bike being in limp mode (since you are saying the bike was running horrible). Also the DES is the suspension error code, again would have nothing to do with the turn signals.
@bryankennethcaraos4 жыл бұрын
When is it gonna be available again sir?
@Motomillion4 жыл бұрын
Available again!
@htran49963 жыл бұрын
I had the NRC eliminator kit for my 899. The plates were really close to the engine and some people said their plate got warped from engine heat. This kit seems to have the plates a bit farther out but will it potentially have the same issue? Just wanted to know in advance so that I can stick a heat shield on the plates to prevent warping problems. Thanks in advance.
@Motomillion3 жыл бұрын
Never heard if such issue.
@computer19953 жыл бұрын
can this be used in panigale v4r???
@Motomillion3 жыл бұрын
Yes, it is the same.
@duclife10595 жыл бұрын
Could you tell me how you got the top part so flush? For some reason, mine is not. I followed this installation instructions 100%
@Motomillion5 жыл бұрын
Do you mean the little flap looking piece? If so, you can test fit first, if it is off a little but, just bent it with gentle force.
@ducatihunter37523 жыл бұрын
Im having the same issue mine has a gap in it pleas let me know what you did to fix it
@Tricky-dj6yw4 жыл бұрын
Hi will this fit the v4 street fighter thanks 👍
@Motomillion4 жыл бұрын
It will fit the V4 Street Fighter.
@spirosstrag2 жыл бұрын
Ι can't find it on the website
@maiko72385 жыл бұрын
how do i install the back most position
@bensahar2153 ай бұрын
Are they street legal in the US?
@nihadkeso98712 жыл бұрын
Man those freakin connectors took me like 10 minutes to put in😑😑😑
@abel666sk84 жыл бұрын
Does it fit to Panigale V2? Thanks
@Motomillion4 жыл бұрын
V2 has a specific one that looks identical. Just wiring is different
@daintreetosea4 жыл бұрын
Does it also have slop in the plate mounting holes?
@arcangelocanciello78173 жыл бұрын
Great! This is compatible with streetfighter?
@Motomillion3 жыл бұрын
SF V4 has one that is made for it which looks the same. Just some of the electronics are different so that it doesn't hyperflash.
@arcangelocanciello78173 жыл бұрын
@@Motomillion on motomillion.com I saw that there is also a version for streetfighter v4s
@giancola1234 жыл бұрын
Does this tailtidy fit the streetfighter model?
@Motomillion3 жыл бұрын
The one for the Streetfighter V4 is here : www.motomillion.com/collections/ducati-streetfighter-v4/products/nrc-ducati-streetfighter-v4-v4s-tail-tidy-fender-eliminator-kit