Motorcycle Clutch Adjustment: Proper Freeplay

Рет қаралды 42,949

4 жыл бұрын

Motorcycle clutch adjustments are easily overlooked for any new rider. Even seasoned riders can miss this simple concept on clutch lever freeplay. Follow the tips in the video to get your motorcycles clutch lever adjustment down packed. Help your friends out, show them something new. Heck, even diagnose why your clutch began slipping to begin with! ENJOY!
Needs step by step carburetor tutorials?
www.themotorcyclemd.com/pro-c...
Grab your free troubleshooting cheatsheet?
www.themotorcyclemd.com
Need more information about the Inner Circle?
www.themotorcyclemd.com/mcmd-...
Motorcycle clutch adjustment

Пікірлер: 112

@albert30300 9 ай бұрын

Thanks so much! My VTX was slipping out of gear on hard acceleration. Was ready to take bike to shop for clutch replacement but fixed it by just adding the freeplay.

@Messymathews90 Жыл бұрын

1 billion videos later thanks so much.i give this video 5 stars

@nocturncal 4 жыл бұрын

Great advice about listening to ads to support youtubers during these times! It's so easy and requires no effort other than your ear/eyes and extra time, which we all have now that we're under lockdown.

@TheMotorcycleMD 4 жыл бұрын

All the tubers out there will be thankful! I know I will be 🙌🏻

@brianburk2559 4 жыл бұрын

Great video! My rider friends were always criticizing the free play in my clutch! O man you should have it tight.... Always made more sense to me to have some play.

@Gabbiano88 Жыл бұрын

Burnt up my clutch from having it to tight…. New rider…. Didn’t know wish I saw this sooner

@cncbuss1 4 жыл бұрын

Finding your videos to be the best in regards to regular maintenance on my motorcycle. Just got back into riding after over 15 years of having no motorcycle. I wish you terrific success with the channel - Thank you for describing the importance of watching ads on KZfaq in order to support our favourite the vloggers. Not many people know this. I’ve subscribed to your mailing list and look forward to your future posts. I’ll be on the lookout for any products you promote as an affiliate. Stay safe - enjoy your Easter Sunday.

@TheMotorcycleMD 4 жыл бұрын

Thank you Claude, really was encouraging to read this. Hope to bring you more value in the future.🤙🏻

@B3rnik 4 жыл бұрын

Good info lots of videos saying is easy but never address all questions you my have like how to know you adjusted things correctly. Yiu did answered most of them. Thanks

@BrandonLund 4 жыл бұрын

Great video Cody. I like the new shop! You did a great job explaining it. Thank you and stay safe buddy.

@SoulAnarchistMusic 4 жыл бұрын

Great info, thanks! I'll be re-cabling my clutch this week, this helps immensely.

@TheMotorcycleMD 4 жыл бұрын

Perfect!

@rickyschultz6357 4 жыл бұрын

This video could not have been more timely. I just watched it yesterday and today put on the new clutch cable for a KZ650 cafe racer I am building. So I managed to put it in correctly and get it adjusted without having to wonder if it was too tight/loose. Love your videos! Keep up the good work.

@TheMotorcycleMD 4 жыл бұрын

Perfect!! Just for you bro!

@davidbedard7195 3 жыл бұрын

Simply the best - by far. Thank you for explaining things in such a useful way - so that I actually understand what I am doing.

@jrsanacore2310 4 жыл бұрын

Thank for your video brother! Since all of the situation outside, I've been able to make a rusty 83 Honda sabre to work. Carb clean, ignition system, fork work, brake work, etc.. with all of your videos. I love your channel because you go in depth. Thank a lot! Continue your good work

@williamsmith8665 4 жыл бұрын

Wish you and your family well. Great video, as always. Thank you.

@jezzahawkins966 2 жыл бұрын

I've watched a few videos on "adjusting freeplay"... yours is by far the best, most well-explained I have seen - well done, and thank you, it's very helpful !

@shagyadvetures2460 4 жыл бұрын

totaly thankful for u sharn ur knowledge an experience pickd up an 81 cb 750 an revertd back to alot of ur vids learning how to properly work on an fix wtvr may have been wrong or needed addressed or just pick up extra knowledge myself on anything I may run into in the future.. thanks

@MrAlmar07 4 жыл бұрын

Nice one Cody. Another well explained video, and just at the right time for me!! Wishing you & yours all the best in these strange times. Stay safe mate. Awrabesht from Ireland. 😉👍

@LOYALLUTON 2 жыл бұрын

Brilliant information and so clear, even for someone like me with no mechanical clues whatsoever,thanks very much.

@Gwambua 3 жыл бұрын

This video is absolutely fantastic, i can say categorically and without fear that you saved my clutch with the wisdom that is in this video, thanking you very much, God bless

@reaganuke8 3 жыл бұрын

I've been rummaging youtube for a detailed explanation about clutch lever and arm but this one by far is the most. Thank you sir! New subscriber here.

@evanmapstone137 4 жыл бұрын

Thank you so much for this video. I bought a new used bike and the clutch was so tight it made it kind of unpleasant to ride. After watching the video I readjusted the cable and it's so nice now. Thanks man

@navidkh1883 Жыл бұрын

The best explanation on clutch adjustment. Appreciate it.

@vintagerealityvr 3 жыл бұрын

I watched a bunch of videos on how to do this before I found this one and this one was the be all end all. Everything I needed thanks

@spiritmotion 3 жыл бұрын

Seriously I have watched each and every video about this topic. This video was really explaining some very information points. I just replaced my oem levers with aftermarkets and I had to adjust the freeplay. I couldn't really understand what the freeplay is. You showed that the freeplay is actually the empty space between the end of the cable and the connection at the clutch basket. Thank you man really you made my day.

@dinbosco9658 3 жыл бұрын

Best clutch adjustment video in youtube. Thanks!

@ZippoVarga 4 жыл бұрын

Stay safe and healthy my Friend! Thanks for helping pass the time while we await this Pandemic to sort it self out. Cheers! Zip~

@steveross85 4 жыл бұрын

Thank you for this video. I've learned more from this one video than i have in years.

@mr.u.213 2 жыл бұрын

Thank you so much for sharing! I had no idea how it actually works, now it all makes sense!

@mille925 2 жыл бұрын

Thank you so much. As a beginner rider I was able to understand how its done right. Very good job. Greetings from Germany

@famillebussieres-mainville4831 4 жыл бұрын

Great video. Thanks for posting your knowledge.

@knu8527 3 жыл бұрын

new subs here. this has always been in my mind "the Freeplay" for years until recently i browse some tips in utube. this helps a lot bro. thanks

@blipco5 4 жыл бұрын

For you...I will watch the ad. 🍻

@TheMotorcycleMD 4 жыл бұрын

Alright alright 👌🏻🥃

@8505angel 4 жыл бұрын

Dude! GREAT videos, just the resource I was looking for. Keep up the good work! Stay Safe, stay healthy. Subscribed!

@funonthebun888 2 жыл бұрын

Excellent video.. taught me so much about my clutch issues..

@matdube3577 Жыл бұрын

So useful! Thanks Cody.

@massoudzadeh3394 3 жыл бұрын

Thanks Cody, great information.

@CafeRacerGarage 4 жыл бұрын

Well said brother, love your work, always so much to learn from you 😁 👍

@bennryan2 Жыл бұрын

Exceptional instructions!

@کارمند Жыл бұрын

great info! thank you

@vinerwe 3 жыл бұрын

Great explanation. Hope you and your family are doing well. Having a bit of trouble with my Moto Guzzi and my Yamaha, but different problems. I will re-examine the free play. I hope neither is burnt. I don't detect slippage.

@Will0ver9000 4 жыл бұрын

Thanks for the video now I understand the freeplay

@flammarama 4 жыл бұрын

Great Video, thank you.

@lockedine 3 жыл бұрын

Thank you for explaining this so well. I've been so confused cuz I have 0 freeplay at all and I couldn't tell which way to turn the screws at the bottom.

@brettcreech3490 4 жыл бұрын

Thanks Cody God bless.

@worbianbrownia2038 3 жыл бұрын

Nice one. Cheers muchly.

@stevesvids 4 жыл бұрын

Great one as always bud... thanks. Sending best wishes to you and your family too buddy.... Will be watching all your back catalogue of vids over n over... heheyyy.. 👍 Regards Steve UK.

@TheMotorcycleMD 4 жыл бұрын

My man! Thank you! Stay safe and healthy brother

@MasteringParagliding 4 жыл бұрын

Thanks , this is clear that mine on my ZX6R is way too tight.

@bob4bob3bob2bob Жыл бұрын

Yes, thank you. Again.

@sunsetoriginals7320 4 жыл бұрын

Great video! Thanks

@TheMotorcycleMD 4 жыл бұрын

Your welcome!!

@sumitsinghshekhawat 3 жыл бұрын

Great video !!! Wish health to family

@TheShahart 4 жыл бұрын

Thanks for the video! I have a vt1100c and I'm slipping in 5th gear.

@joeysanchez2023 Жыл бұрын

Thanks Bro.

@jonsmith3723 4 жыл бұрын

Thanks! I needed that

@TheMotorcycleMD 4 жыл бұрын

Your welcome! 🤙🏻

@STIZEN9 4 жыл бұрын

dude you had me cracking up @ 10:47!!! You are pretty fregn cool my man! Your awesome.

@STIZEN9 4 жыл бұрын

you explain a confusing subject in a way that is interesting and simple. I am listening to you talk and I get it. Your a good teacher. Thankyou JESUS for youtube.

@STIZEN9 4 жыл бұрын

15:25! LOL Ahhhhhahahahhhhhh hah

@2jsims 4 жыл бұрын

ok bro - ads it is! the rest is Definitely worth the wait!

@hystloko2890 2 жыл бұрын

Thanks g

@usernamemykel Жыл бұрын

You're awesome - had no chaoice but to like and subscribe. QUESTION: Awhile back I adjusted my free play. As a consequence, now when I want to go from 1st gear to N, it bypasses N and gows into 2nd gear - so, do I need to increase or decrease my lever's gap? Thank you!

@paulopedro1674 2 жыл бұрын

Great👍👍👍👍

@noahprieto4048 3 жыл бұрын

This saves me

@themrrd12345 3 жыл бұрын

Just came up on this video and it's got good information. I have a CBR650F where it feels like it's slipping at higher rpms. Before it wasn't like that but I never messed with the clutch cable adjustment. Would you say the friction plates are worn or might I be able to save it with an adjustment?

@snkboarder 3 жыл бұрын

Lovin' this, but could you go over tensioning the freeplay down below at the locknuts a little more? The fine tuning at the handle is great, but I'm not sure how far to start down there at first. This really helped me on a 1972 Honda Sl100 I found in a barn. I've never worked on or ridden a bike before. It'd been sitting for almost 20 years and the clutch plates were galded together in one huge mass. I had to take it apart and pick the steels off the friction discs with a screwdriver. The clutch discs all seem okay based on what I know from cars, but I didn't get a micrometer out. Everything seems fine for the most part, but when you shift into first you can feel a small load placed on the engine, but the bike won't creep on its own. Some people say that's normal for an older bike with a well-used clutch. I've noticed, though, that the more I ride it, the less it does that. Makes me wonder if it's just junk being cleaned off the friction discs as it gets warmed up, used and fresh oil is sloshed around up in there. Also, I taught myself to ride on this bike yesterday and today is only my second day riding. I tried what you said about getting up to 20 MPH, shifting into fifth and then punching it. The bike gets really throaty and bass-ey, RPMs drop and it lugs just like a car would but will still accelerate at an admirable speed. I think this is a win?

@rodclaude1201 4 жыл бұрын

like your videos.can you help me . older fella,love my bike have 1985 maxim X .green light nutraul is not easy ,to light. Once I stop ,need to turn bike off & pull the foot lever up, & play till green nutral light come on,also copper wire broke off.

@craigslistnothing6015 3 жыл бұрын

Awesome video! Here's a question if you have time to answer: What purpose does the clutch release mechanism and pushrod adjuster play in all of this, and how do I know when it needs to be included in this process? I ask because my clutch freeplay had all but disappeared after, or sometime shortly before, an extensive low speed session. It became symptomatic when the clutch began failing to fully engage when I released the lever. So I made adjustments at the lever to return it to the correct level of freeplay and it seems to behave differently now. The friction zone bites sooner and harder when engaging the clutch, but the overall power doesn't seem quite as explosive as before. I can't seem to lift the front wheel up anymore when clutching up in 1st gear for instance, as if it's almost all the way engaged. Anyway I'll keep experimenting to see if I can solve it, but any input is appreciated if this issue seems obvious to you. Keep up the great work!

@cookiecanfly_ 2 жыл бұрын

Hey man awesome video!!!! Bro what does it mean for my cb250 when the bikes off it’s super easy to get into neutral but if I have the bike running it’s tricky to get into neutral. Cheers mab

@harrywright799 2 жыл бұрын

hey I had this same issue. nighthawk 250. say you're at a stop light, clutch in, in first. you want to go to neutral... but it won't go... rev the engine and try clicking it up to neutral. works? what does that tell you? your idles too low. now great news is this can be sorted with a screwdriver. adjust pilot screw.

@oscr_zen 2 жыл бұрын

why I have corrct free play on top should the clutch lever on bottom move at all in the free play range?

@antiposer016 Жыл бұрын

What about the firmness of the first gear shift, does that "lurch" directly correlate with the clutch adjustment when it's cold? Also I'm wanting to move my friction zone closer to the bars, but I'm worried my clutch isn't engaging fully upon release, how will I know for sure? Is it possible to move my friction zone and be in perfect spec for the clutch?

@thetruthisoutthere8598 4 жыл бұрын

I have a 2005 shadow spirit and it shifts 1st, 2nd and 3rd just fine but very hard to get into 4th and 5th unless really wound out on rpm. Can that be a clutch problem or gears?

@georgesteffens7489 Жыл бұрын

Question for you - I’m replacing my clutch cable for my Shadow, with an OEM stock clutch. In your experience with cables, should they be lubed when new? I keep hearing every now and then Honda cables don’t need lube. Thank you!

@nabusintox2627 4 жыл бұрын

I know this is off topic but I'm a big fan and didn't know where else to ask - I've got an '83 CB550 and have always noticed the chattering valves. A Harley bro I was talking to said that sound means I needed to adjust my valves, but I thought the Nighthawks had hydraulic tappets that didn't need adjusting. What, if anything, does this mean, and what can/should I do about it? Thanks in advance as you've already helped me with so much on this beauty!

@TheMotorcycleMD 4 жыл бұрын

Your bike does use the HVA system. Unless the motor is really high in miles, it’s unlikely the HVAs need attention. Unless they are not functioning. Regardless. It’s more likely to be your cam chain or cam chain tensioner that is so noisy. Best thing to do is isolate the noise by pin pointing where the noise is coming from. If it’s loudest dead center of the cylinder or head. It is cam chain noise.

@Mrbooboo1972 3 жыл бұрын

Hey Cody bud... Im in need od some help. My 2001 Suzuki gsx600-f Katana i have i changed over to a pair of MZS shorties levers and they worked great. I then bought the complete shprties with brake reservoir attached and the complete clutch lever side and well i cant get my lever to adjust properly i even messed with the lower part where you take the cap off and turn out the nut then adjust the screw. I cant get my clutch right it wants to engage right off the handke bar.. which is No bueno/ Good. I did notice that on the back of the new clutch lever it reads sv-650 which i believe is for s-vrom 650 Suzuki, its not not right man. Any suggestions. Thanks in advance

@jamesa6272 Жыл бұрын

So what I’m dealing with is the opposite. I just replaced the clutch disks on my rebel 450. If I add the suggested free play it’s hard to shift gears. If I make it tight it shifts good. I’m not sure what’s going on

@AICD1999 4 жыл бұрын

Yes, being in the medical community myself it is a two edge sword. Every other week work cycles here. Unfortunately there is nowhere to go on your off week. Going to ride, work on the 1988 VTR250 by painting plastics, and general spring cleaning.

@TheMotorcycleMD 4 жыл бұрын

Great idea man! Busy work is good!

@abhishekbsws 4 жыл бұрын

I feel little jurk on my lever when down shifting.. why?

@sydneybaumgartner9801 4 жыл бұрын

Great info! I have a 2008 KLR 650 and after a shift I have to take my finger and push the lever back forward. Will an adjustment as you describe cure this? I also have a 2016 Goldwing. Thanks!

@TheMotorcycleMD 4 жыл бұрын

No likely! Would suggest a fresh cable first!

@sydneybaumgartner9801 4 жыл бұрын

@@TheMotorcycleMD Ok thanks for the suggestion!

@joedeleon3435 4 жыл бұрын

Hey Cody just wanted to ask you is that a 1971 CB750 in the valley green metallic paint scheme in the background? Oh I see now, it's a cb450 right? Same paint scheme

@irishpac22 Жыл бұрын

Hello Cody, I have a question. Does clutch freeplay increase or decrease as the clutch wears?

@tknadin 4 жыл бұрын

Would it be a good idea to show how the clutch basket works? - Great show.

@TheMotorcycleMD 4 жыл бұрын

I suppose everything helps a bit! Noted. 🤙🏻 Thanks for watching

@daveco1270 4 жыл бұрын

He did a video a while ago where he replaced a clutch. You should definitely check that one out. Very educational.

@TheMotorcycleMD 4 жыл бұрын

Thanks Dave!!

@daveco1270 4 жыл бұрын

Is that a Texavina (aka DayTrader07 on Ebay) seat I see on your Silver Honda CB450? I ordered one from them a couple weeks ago, waiting for it to arrive.

@TheMotorcycleMD 4 жыл бұрын

Yes!! Love the seat!! A little stiff, but i love the craftsmanship!

@garylollman5339 4 жыл бұрын

I have a question to ask you. I have gotten to that age (75) where I have issues with my balance. I am uncomfortable too try and ride my 89 Gold Wing, and yet I would like to ride it. I have been giving thought too buying the parts to make my bike into a trike. Okay here my question. Do you have any experience in trike system and if so what would be the best by for the buck? I classified them into two types. One you use the current bike rear wheel and add training wheels to each side. (This looks hooky to me.) Second you take the rear wheel off and use your driveline and go into a differential and build from that. Anyway what are your thoughts on this and any manufactures I should look into? Thanks in advance, and I watch ever one of your videos you post. You are amazing young man. My first bike was a Honda 360CL. Rode it from Portland Oregon all the way to Everett Washington and back on trip. I made up my mind that I wanted a more road bike but life an bills got into the way and never was able to afford one until my late sixties and early seventies. Thus my issue with balance.

@TheMotorcycleMD 4 жыл бұрын

Great questions Gary. I have built a handful of trikes on many bikes. I actually work at a shop that is also an authorized Motortrike dealer. Here is my advice and I would listen close. Any bolt on training wheel style attachment is something I would stay VERY far away from. This includes any modifications that require the rear wheel to still be installed. I believe they are called galaxy kits or odyssey or something like that. Garbage. He have seen them come apart and now we won’t even touch any bike with these kits installed. We won’t even remove them.... If i were you, the best bang for your buck is to keep on the lookout for an already built newer GL1500 set ups. Roadsmith, California Side car, Champion, Motortrike, and Hannigan trike. All make good kits. I don’t think Hannigan makes 1500 kits but they are top tier. Many riders who own trikes are older, at such a fine age as yourself. Often times these riders just can’t ride anymore. They are typically well kept and well maintained. You may love your 89 but the cost effectiveness to have a kit you trust (rear differential/axle/ body swap) installed on such a bike will be just shy of a newer already completed kit. Any of those Branded kits I described are trustworthy kits. If you go with a bolt on training wheel death machine. Just remember.. You have been warned!! Glad to hear you still out and about with the passion for two wheels. I hope this really helps with your decision. As soon as I read that you looked at the bolt on side wheel kits. I just had to put my two cents in. 🤙🏻👍🏻 Ride safe brother.

@mohammedhegdah 2 жыл бұрын

My clutch had no free play at the bottom, i thought my clutch plates were worn out, after i replaced my clutch plates, i still do not have no free play, what could be the issue?

@cow7boy 2 ай бұрын

Any idea what causes hard shifting? I picked up a used 2012 XR650L with less than 7,000 miles on the odometer. I noticed that it feels hard to shift, especially from 1st to 2nd and 2nd to 3rd. It takes some effort. Just feels hard. Shifting to 4th and 5th feels mostly okay. I have adjusted the clutch freeplay to within the recommended range without much improvement. I've owned cruisers, sport tourers, adventure, and enduro bikes. None of them felt hard to shift. That's probably why I noticed it on the XR650L. Any idea why it feels hard to shift? Great video, by the way. Thanks for sharing your knowledge.

@cow7boy 5 күн бұрын

Bump, bump! Anyone?

@alinutzalin6346 4 жыл бұрын

So its better to have more freeplay than none right?

@singhangad 4 жыл бұрын

a heavy clutch pull could also be because of cable thats shredding itself

@markparry5722 4 жыл бұрын

Hey there hope youre okay cody :) i have a cb100 k2 1972! And i struggle to get her to turn over and when she is runnjng she is sputtering and backfiring what could be the issue please? Thank you :)

@TheMotorcycleMD 4 жыл бұрын

Probably either ignition or carburetor!

@markparry5722 4 жыл бұрын

@@TheMotorcycleMD when you say carburettor what carb issue could it be? Thank you :)

@markparry5722 4 жыл бұрын

@@TheMotorcycleMD hey cody just fettled with the carb and its all good and clean original all stock keihin carb and jets! So it leaves me with the ignition the spark plug is giving me a yellow orangle spark is that weak and why could that be thank you very much :)

@amezcuaist Жыл бұрын

Adjust the free play so your middle finger is bent (90 degrees ) just as the lever needs pressure. That`s when wearing your gloves .Don`t be stretching with your middle finger .

@lukechambery3135 4 жыл бұрын

I’m completely confused. I have a 2018 CBR 650F and I was trying to make adjustments and this has completely thrown my bike off. I’m sure I’m making a small misunderstanding mistake, but you weren’t on the bike showing us what it looks like when you let off the clutch and the bike moves forward. Are you in first? Or neutral? If I let off my clutch and my bike is in 1st, that sounds like a throttle problem. I’m just totally confused. And I’m sure 30 people will comment and tell me it’s so easy, but if you don’t know what you’re doing or understand it, it isn’t easy

@toonopolystudios 4 жыл бұрын

Did you go to school for this or did learn by experience

@hystloko2890 2 жыл бұрын

My problem was when I released my clutch it did not stall out or move forward , all I did was adjust my cable and now I don’t have to pay my evil mechanic 350$ for a simple clutch replacement

4 жыл бұрын

Thanks TheMotorcycleMD! Regards from South America, Excuse my wrong english please! I understand about short finger lever adjustment looking for propper clutch disengagement, without any movement on the bike while it is in it's 1st gear. I DO THIS USING A DIGITAL TACH METER AVOIDING DROPPING RPM NOT MORE THAN 20~30 RPM. IS THIS OK? AM I DOING IT RIGHT? Let me talk some about hand anatomy. Normal use of clutch lever is pulling lever with distal or middle phalanx, but I find much more healtly and much more pain resistance USING THE PROXIMAL PHALANX from here: drive.google.com/file/d/1_3MaZYTjzfI6t-Ae717iySI7F0UJsVli/view?usp=drivesdk to here, all the way to the bar: drive.google.com/file/d/17WQs71EoKWERPikqLRna6SVgyQo5Vy5D/view?usp=drivesdk Hand works fully closed! more grip, control and less forearm muscle effort and pain. My question is about that, knowing that my lever setup gets 1st gear and not feeling of bike movement or droping more than 20~30 rpm, ¿WHAT IS HAPPENING IN LONG TIME TO THE FRICTION DISCS HAVING THAT LITTLE SPACE TO GET OIL BETWEEN THEM AT CLUTCH DISENGAGEMENT? THANKS A LOT!!! CHEERS!