🌘🌘🌘 Check out our other video HERE: kzfaq.info/get/bejne/mbmAqZNqtJjepKc.html

I remember as a kid, there was a magazine with ads for gas powered engines you could install on your bike. This is so cool. But, I'm now too old to be cool. Lol

The last one would sell so much better than any available ebike

The last one with the drill batteries is a work of art and convenient.

Good luck with the dogs on the second bike.

I remember adding engines to everything growing up 😁, although we ordered a clutch instead of welding one on.

Nice ideas, I have built 2 ebikes with treadmill motors (belt drive) and they work great for the price. Its addictive salvaging junk for a DIY build!

I love it, especially, the last one.

It's easy to build one from scratch like you did if you have the know how and tools at your disposal but for the rest of the world, it's easier to buy a build and slap it on a bicycle frame

Your patience and integrity is superb. I salute you.....swamhiji

Beautiful and professional book. I like this car

In germany, you going straigt to jail when you drive this and have fun

Great colors too.

Interesting. But if you're gonna attach a sprocket straight to the spoke intersections, expect problems sooner or later. Spokes can break from seemingly no good reason already on a proper build. Attaching a bolted on sprocket to the intersection crossovers is only gonna cause undue stresses on the spokes and also spoke rubbing wear and tear, those aren't flush surfaces. Also, don't assume anything about the bolt pattern, different rims have different spoke counts, one such spoke count is 28, which doesn't divide by 6 or 9, it divides by 7. People, if you're gonna modify your bicycles, don't make any assumptions about videos such as this one, do all your own measurements CAREFULLY. Measure 3 times and cut once is what most experienced builders will tell ya, for good reason. Edit: Also make sure you don't have the exhaust coming right onto your tires. Not saying this happened in the original video, just saying it's another thing you should look out for if trying similar modifications yourself. I feel there should have been more safety and common sense engineering information posted along with this video.

Ide yang cemerlang, jenius, membuat kita nyaman bersepada👍👍

Extremely impressive

I think you’re missing what makes bicycles cooler than cars.

I have a full suspension mountain bike with a Poulan/Husqvarna chainsaw engine mounted mid frame. It used to use the rear derailleur, definitely not recommended, but it works pretty well. Gonna do some more mods later, it already has a headlight, taillight and turn signals. I'm going to change the gear ratio, love your build here.

Awesome skills. This show should be on tv

Can this work on full suspension bikes?

I love videos where people do things the hard way !!

The last one is a beast 😎

Tax insurance, licence? Now it’s motorised!!

wow talent man make a nice design ♥️

The first bike needs to be sold in a kit, no welding and minimum tools

Cool! He even painted it Husqvarna Orange. My favorite

Parts list would have been sweet

Мощьность вымышленая!!! А скорость с горы!!! Прямо в овраг с обрыва!!!

How to the spokes fare? It seems like it would damage or off-balance them down the road.

He built the bike to go longer farther faster. Great 👍 work

Tenis ball tires , WOW , I wonder how good they work ?

FIGHISSIMO che bello, BRAVO 👏👏👏👏👏👏👏

Safety tip: never wear gloves when using a drill press

Byooty beats. Soothes. Soothes even the savage Offspring Album

Can anyone tell me what thickness of metal plate and pipe to use for the 1st project in this video. Cheers.

The power of imagination. And you dont need a shop to do this either. I like all the bikes he made. Excellent job.😊

The first bike has a gear ratio of about 4.5 to one. So if the engine is at 4500rpm the wheel is spinning 1000 rpm. So the 26 in wheel has a circumference of about 82 inches which would travel about 6666 feet per minute, times 60 minutes and divide by 5280 ft come to about 75mph. The max speed of this 25.4cc engine is likely less than 30mph? which would put this engine at about 2000 rpm. What am I missing? without a jackshaft with extra reduction these types of vehicles have a gearing almost the diameter of the wheel. Think of a friction drive bike which will have a roller less than 2 inch diameter, spinning an the circumference of the entire tire.

First motor bicycle is a gateway to motorcycles.

In the past, 50s and 60s, could you see pushbikes with small engines everywhere in europe.

liked the last one.

Superbe idée ,mec t'es un bon toi👍👍👍

What is tope speed of this cycle and how many cc of engine

this is a real wretchedness of the mind, an electric bicycle, and it is not clear what it is

Does this bike still use the gears ?

What is the size sprocket used for the first orange bike and chain size please. Anyone ?

what is the name of the engine?

ever thought of running engine output into a geared rear wheel hub? shimano's 3 speed thingy should work for a nice gear reduction, a direct drive and an acceleration.

واو.مدهش.عظيم .افكار راءعة . ولكني لست من مشجعي الدراجة ذات كرات التنس .هههههه. اما الدراجة الاولى والثالثة فممتازة وفكرة جميلة .خصوصا اول دراجة ذات المحرك البنزين .غير متعبة عند السياقة وسريعة . ممتاز .تابع التقدم والافكار .

Pra isso eu teria que ter tempo dinheiro uma bike e todas essas ferramentas !

That orange was very attractive

A motorized bike gets you around faster. Really great for quick bike deliveries. Or for longer than normal distances.

Trust me if you want to make tons of more money carry your diy creation to a manufacturer & make kits so we can buy it online or at retail stores it will sell out very fast as it hit the shelves!

What are the materials?

i like the first and the last. the last one, probably good idea with gas instead of battery.

I commuted on one of these for about 6 months. Until my mechanic friend said “Any torque applied to your bike spokes and not your hub. Is a ticking time bomb.” You really have to replace wheels often with this method, and wear a helmet.

Parabéns pelo seu trabalho gostei e muito top

On the last part of the video they should have made two types of foot rest it would be useful on the last bike over all I really enjoyed the video tho looking forward to watching more videos on different bikes being together I'm currently trying to put my bike together as well with engine on it

Dude I absolutely love it love it love it! I've been riding motorized bikes for 15 years now, switched up to some high-tech ebikes now, but what I just saw on the first 10 seconds of your video was pure gold! You rock dude

I love that bicycle..goodwork

That motor is really cool.

Thought it said" monetized " . Confused for 15 seconds lol

You bro are totally FUN!!! 🎉 😮amazing

Damm 😳.. He got good skills 👍💪😎

It's a good idea, but that product existed a long time ago. Honda Cub F type

Três projetos Top !!!

Is there working plans available for the motorized bike or any other projects

Good idea, nice job, joyful music-video. Thanks.

That’s some Mad Max shyt right there. 😮 WOW!

What a Legend!

dunno man for some reason l likes that second one, the orange bike, lawn chair seat.. nice

Thats actually content. Thank you algorithm

Nice job. But he forgot to add Breaks 😂😹

Very well done

Buenos vídeos cargados de grandes ideas

Хорошая идея с мотором. Но думаю спицы полетят на не ровной дороге .

Perfect. So simple. All can I do in our kitchen...

This is a great watch. I dig the last one. Keep up the good work!

We need a good $200 1948 Whizzer motor kit.

I knew I was onto a winner as soon as he sprayed the tyres 🤭

Wily el collote,te kedo brava lo boy a intentar,gracias

That was cool but the weight on the back wheel makes it harder to control at lower speeds, like when starting and stopping. Especially since the weight is on one side. I've been wanting to add a engine to my bicycle but I definitely don't want to lose the function of the gear shift. That would slow me down. Peddling while riding let's you accelerates faster.

Firts time to watch your video today 6/5/2033 I'm totally amaze.

Should have put the motor in the center of the bicycle attach a gear to the left side of the crankshaft where the pedals are attached remove the pedals as well and then you still get your gearing ratio on the other side so you can still shift gears and get better speeds or torque depending on the need setting it up the way that these guys did by attaching it to the rear tire off-center make the bike lean more to one side because of the extra weight and then you have to deal with that while riding How the gearing is you will not get much speed tiny wheel turning big wheel Also the way that the gear is attached to the rear tire will eventually cause it to break

satisfying to watch...amazing skills...keep it up 👍😎

Didn't liked the gasoline spill at the end of the first bike, but still an amazing job!

What welder are you using I'm trying to buy one like that?

Очень круто👍😎

Hey that last one was super cool

Excellent my man very creative!

Um projeto tão elaborado desse e soldou o pinhão, e na hora da manutenção/revisão ?

How long did your clutch last? I smoked and destroyed mine in 5 minutes haha. It was a 27cc craftsman weedwacker motor.

Konkret benzin motor respekt ! Elektrik no god !

Wow, soon as I saw you bolting that project through the spokes I just shut it off.

That's freaking awesome

Pretty slick !

I like that sprocket

Last one was too smooth...

what kind of paint did u use for the tires?

nice welding

Nice one I love the bike