I put my first bike together about a week ago, never understood why you called your viewers enthusiasts until the second I got it started. My hands are constantly covered in grease and oil, and I now have "pocket wrenches" but I absolutely love it. You helped a lot so far! Thank you!

I went through pretty much this same exercise last year. Headlight, taillight, stoplight, turn signals and horn. All on batteries, not connected to the magneto. From your comments, sounds like the scooter laws in LA are similar to Michigan. I went to the local police to have them inspect the bike so I could apply for a VIN, yada, yada. They pointed me to their motorcycle / scooter expert. He pretty much laughed and said, it's a bike. As long as it has peddles and can be ridden with out the engine running, they consider it a bike. Legal to run on the streets with or without the engine running. I asked him if he would sign a letter to that effect and he did without issue. So, if I get a ticket someday, hopefully this covers it. I found the whole exercise weird, but am glad I have the lights on the bike now. I do appreciate your video, as you used different components I was not aware were available.

10-4 on the 49cc motor sticker. I actually took the plastic shrouding/cover off of a 32cc weed Wacker and cut and dremeled to semi appear like it belongs to the engine. Thank you again for your time and insight. Cheers

All of my engines are 49cc, even the YD100.

I like this build.I hope it is still working well for You! I have a similar set up and i really like it mostly for night riding! You can alway use an auxiliary mag . It fits on the right side of your existing mag.Puts out 12 to 18 volts at 3 amp.and will not affect your other mag setup or power at all for about 30 bucks. And it work very well.I have had it in one of my bikes for over 20 plus years and works everything you want to turn on or charge. Keep up the great work and thanks for sharing your FUN upgrades and Ride alongs.👍

Bruv. Your content is awesome and doing a lot of the leg work in helping me convince the boys into starting a tongue in cheek motor(ed) cycle gang. Keep up the great work!

I’ve found if you just pedal along while you ride, it breaks most suspicions from any law enforcement or whatnot.

GOOD LOOKING OUT L.A. HAPPY VALENTINE TO YOU YOURS .. AND ALL

She is purrying love that sound

I have a Huffy Good Vibrations. Very similar, if not exactly the same. Going to be putting an engine on it soon!

hover years ago in the early nineties we were a bunch of broke kids we couldnt have even dreamed of all that stuff on a bike but we were clever all we could afford was those cheap plastic five dollar a set pedals for our bikes the ones that wore out in a hundred miles or less what we did was grind some of the plastic out and put a metal liner in there with grease those pedals would then last about 175 miles or one summer vacation another thing we did was we would run drywall screws through our pedals and then snip them it kept our feet from slipping off the pedals as the metal was sharper and harder than the plastic barbs already on the pedals man those were so fun times hell we even kept junk bikes around for parts one of us was always breaking something lastly we salvaged the 54 tooth sprockets and crank assembleys from exercise bikes and put them on our bikes as a result we could pedal and get speeds of 35 to 38 m.p.h. and with slight downhill grade we hit speeds of 40 and sometimes as much as fifty if the grade was steep and long enough back then we had no idea of how dangerous that was because at the time bicycle tires were only rated for 32 m.p.h. l.o.l. good times those were

Awesome stuff. I went on Amazon and found an adapter for my Ryobi One+ 18v batteries (they sell similar items for most other cordless tool batteries too). It fits over the battery and has two 12ga wires sticking out of the top. I bought an adjustable step down transformer online as well and wired it to the adapter wires. I adjusted the voltage from 18v to 12.5v. Now I have a very loud car horn and a way to add more stuff when I'm ready. It is, however; independent of the magneto system so it will not charge while riding. Not an issue for me since I have several batteries and only using it for a horn. Works great for my 1 to 2 hour a rides around town on the weekends.

Hello very interesting video the bike looks awsome with all the mods them fenders are cool.

Those collapsable fenders are cool as frig

2 years late to the comments, but I did remove just the brake shoes for awhile without issue and ended up going back to coasters. I also have front and rear hand brakes. Going strong without any issues, just keep em greased up good.

Test the amperage output to be sure! This vidio interests me because I have an old school headlight and most people say the white wire on the kits is useless so I'm hoping your right!

And cops... what i do is just hit the kill switch anytime i see cops. And peddle try to peddle all the time just the act of peddling no strength behind it.

Yeah, i accidentally totally disassembled my coaster brake hub when just trying to remove the arm. I learned more about coaster brakes than I ever wanted to know, having to struggle to put it all back together.

Because you helped me with some ideas for my bicycle I'm gonna subscribe to you just to show my support to your channel

You killed the the motorbike game with this one!!! 👍🔥🔥🔥

By the way watch all your videos , Build Break n fix as well as johnnies love them all up and are very informative......

Im joining the bike club 2morrow!!! My 1st with a BBR bored out to 100ccs! IT has gum tires 1920s race seat and tail light. Custom exhaust pipe sounds like a Ducati!!!! I'm getting an motorcycle retro headlight painting the seat gun color adding turn sig mirrors. I'm gonna custom a retro faring retro odometer horn and retro 1920s graphic stickers and wrap the frame in wood grain vinyl. I can't wait for the upstate wny trails and parks and rds.... We got the best outdoors! I think my bike does like 55mph???? Getting a beno half shield helmet and caaaaant wait!!!

That's bad ass I'm working on my project 80cc motorized bike myself

I have a proprietary coaster brake removal process thats simple enough to complete with simple hand tools in about 20 min. Its a brake shoe and slight modification to the spring clutch device inside. brake arm removal is optional ( I usually leave them intact just for fun )

Like the 49cc stickers

That's a beautiful trail path for riding your motorized bike love the video bike looks nice clean bike setup ma guy like always ma respect and love to you and the family stay safe out there God bless you and the family and the whole world 🌎❤

My headlights on the front are dual beam 2500 lumens, and my helmet mount is triple beam 5000 lumen. Bright as fuck.

i gotta say im glad theres someone like yourself in the motobicycle hobby thats helpful enough to have a channel that can help someone like myself. i struggled with numerous things like coaster brake re-installment and breaking in your engine properly. is there a contoller box of some sort that you have hooked the electronics up to or is it all just going straight to the battery? because ive got some lights and getting the same relay and indicator switch you used, so it would help to know how you wired this together. let me know because im in the process of making my 49cc bike street legal in the state of VA. love your videos, you've helped me out a lot.

My dream would be to attach a massive co2 canister connected to a train horn. The sound would be hilarious

pretty sweet set-up...in FL, as long as you have some sort of head and tail light you are good...if you are going to register it it has to meet the same requirements as those of a moped

Thats a seeutek very nice motors for being a China doll

I had no problem removing the coaster broke of course its easy when you have the right tools

I've built my own lightning system from scratch it runs on 12v 3.5amp motorcycle battery the headlight is a 35w halogen im just installing it into my electra custom frame i have a few short vids on my channel

Enjoy your videos bro

It becomes a "moped" they give you a vin plate. Depending state to state is different.. but depending on how hard your state is on emissions and depending on if mopeds need to pass emissions in your state these chaina dolls wont pass. But dont worry you can buy "flying horse" epa kit or maybe just the exhaust im sure you can find it used since no one runs the epa exhaust from that kit you lose a lot of power with it.. but to pass inspection if needed 2 nuts take 2secs to swap out

3A is a LOT for the generator addon. Where i lived in the US, we didn't need any of that stuff, and couldn't register it even if we wanted to. And they are 100% street legal for anyone with a valid drivers license. I did however add all the lights and stuff but that's just for my safety, not for any legal reason. Not sure what state you're in though. I however painted my bike to make it look really pretty. If the bike looks like a messy unsafe POS, you're more likely to get pulled over than if it's something that looks well put together and looks really nice. So i'd suggest painting the petrol tank with something that is petrol/oil resistant. As well as keeping the bike clean and shiny.

In the four states Iv'e had these bikes, the one thing that is not allowed is a clutch. In Oregon the rules vary from city to city.

Love the quality of this video! You gained a new sub :)

I recommend to get a new hub and axle. You can remove coaster brakes if you took out everything it will work but NOT SAFE its a 50/50 just opens the door for issues. So your best bet is getting a h.d axle/hub kit the sell them on BBR and motorbikes they around $50 it will give you a drum brake great brake to have and a better way to put on sprocket. A bike shop should be able to build rim using the huffy rim just swap hubs for another $20-30

23:21 I'm using a Makita 18v cordless drill battery with a 12v stepdown converter on my street legal CR80, since it doesn't have a charging coil. Battery lasts the entire day even with the headlight on (it's illegal to turn it off while riding on the streets).

Can you make a video of how to put the whole thing together?? Please, cause I can’t find any video on YT to help out

Is the stock rear hub holding up OK? I've heard people say its junk but that was on forums that are 8 yrs old...

I'm not sure but I believe you need yellow side reflectors in the front and red side reflectors in the back

(Arkie in San Antonio) I've removed the COASTER BRAKE all of my builds ,all Cranbrooks so far if you find the right directions on line it only takes about 15min walks you all the way through it. 20:59

If you got rubber motor melts and box in the engine make that engine much quieter also add a converter AND a good Muffler will quite not engine down quite a bit it's possible you might not even hear that engine when it's running

Sounds good

I took my coaster break and the rim eventually separating from the bearing, the arm held it together in, idk, but had to get a new rim.

Bro I just got a bike because of watching all your videos and it’s a 2 stroke that’s like very very sketchy (multi gear turned into single speed) but man now I want to make videos lol

He man, you forgot to stop at each stop sign. STOP! Spin Tires On Pavement! S T O P

Do you think you could do a upgrade version of this'll video but have everything running off a 12v rechargeable battery 🔋 and using led lights and you can use with a razor mx650. Thanks

I have that same bike computer on my build, you said the light doesn't stay on, but it can, press both buttons at the same time, and the light will remain on.

I’m thinking about putting together a bike build, but I have a question, I don’t know if it is possible on my bike because the previous owner modified the handlebars to be bullhorn style, and it still has standard grips, and I don’t know if it would be possible to install the accelerator grip. (On the normal grip spot) What do you think?

Good stuff :)

I wish you would have filmed the brake removal but I think that I have only seen the removal of the brake arm!

I bought a bike that has been through the ringer. It works ok but needs some help. I love your video, can you offer any help. I also have parts ordered for it.

I can't see the battery,where is it?

where did you get all these parts?

You should slip them so the under the bars and can see behind you better just look down and you'll see behind you. Just a thought

@LA Hover Did you need something between the battery and the lighting, like a controller? I assume you got the barrel connector wired up to the straight wires somehow...

Yes I removed the entire gut system for my brakes I'll have to do a video on it, basically now I can pedal several times before catching with the chain. To pedal forward but I did not have a option once I had started my build the coaster brake leg got mad and the wheel had locked in both directions like a fixed gear bike. Didn't want the pedals to beat my ankles as I ft down the road soooooo

Complaining about you rolling through stop signs but you remind me of a joke that a State trooper once told me about. He pulled the man over for rolling through a stop sign and the man started to argue with him why should he have to stop if there's no cars coming. State trooper explained that Hill demonstrate why he needed to stop and took out his. He began to tap on the man's head with the knife stick and asked him now you want me to stop or slow down. State trooper claims the man got the point. LOL

The coster break process is hell I completely took the hub apart had to find replacements parts because money then I had to figure the ish 😞 ut

Hey Hover! I got one of these kits for a bike I had I have a 15 inch frame tube height I don’t know if it’s big enough it has the proper with of the tubes what’s the size of your bike? Nice build btw

Hey I was wondering about where you got that lighting system from (taillights, turn lights and horn) and how did you wire them up to the magnetto Edit:and where can I find a dual brake lever to have both in one hand If you could provide me links for everything it would be awesome as I started this hobby from watching your videos and I got lots of my friends hooked on these 66cc beasts

Wisconsin actually has some good motorized bike laws. Up to 130cc and no lights as long as it's day time. For once they're actually less strict than most states.

That’s funny because I don’t even slow down at the stop signs

No nitro and I've been doing a full curcit electrical kit with gps dule hand brake same as a normal car motorbike can run solar, Ac 5v charger 1amp rate, or on the dynamo 6w battery supplys and drop when full to the lighting kit. Going the bike industry as it will fit in a 50mm frame hopefully the 25mm but will need to wait and see. And foot peg led 3 pin types and 2 types Ir and lined as the front is on suspension 😕 9v front light main 2 3.7v backup but can use 5v 9v 12v set as well as horn on a 12 song kit one for now, gps, indicator, hazard and brake kit hand made! But should be a good application 😆. As a few back there was not one worth the cash on and this one from china was like 200 bucks for one front or back and like 20 dollors worth so went to make my own for the industry hopefully in the next year or so with a full tested kit for market use you could basically add all after market led fits on top.

I removed the coaster brake on a bike that I call "clown bike" I took everything apart and Gutted the entire assembly except for the components that are required for rolling (bearings etc) I didn't actually find this to difficult.

doesn't that magneto have three wires?

So cool. So you can hook up lighting system to the extra white wire? And how did you manage to fit the right side blinker into the handle bar with the twist throttle? Thank you

I’m Ok the bike cannot exeed 30mph on flat ground. It can not have a bigger engine then a 35cc. It doesn’t need to be registered or anything and you don’t need a license but it’s gonna be slow...I have a 66cc/80cc engine and it goes ab 40-45mph but I slapped a 35cc sticker on the motor and I just don’t go past the speed limit I ain’t got in trouble yet but I’m good at playing dumb so if I do imma apologize and pretend I didn’t know any of this

are the voltage stabilizers expensive? i think i can build my own

I have a similar bike speedometer, it keeps the backlight on if you hold both buttons for a couple seconds, might work for you, might not.

Hello. I love your content. I need help wiring my turn signals and horn. I have the same turn signal switch and horn switch assembly as you are using on your cranbrook. But I cannot figure it out. I do not have a wiring diagram can you help me with this issue?

Do you have the build for the engine in this bike? And what year is this cranbrook?

your light gets very bright did you get it at walmart

do you have a link for the break switch?

Hello, I’m trying to find some good mirrors that don’t block my shifting and those mirrors look great! Do you happen to remember where you got them from and possibly have a link for them??

Why did u not put links to anything you have ??

Where did the regulator / rectifier come from (ebay , amazon , ?)

im planning on doing something similar to my cranbrook. what brakes did you use? also how did you get your bike to start so easily?

im looking to do the same sort of lighting thing for my bike but im not experienced with the electronic parts of bikes. i was wondering if you could reply with everything you used for your lighting system like horns lights battery nd maybe a link to a wiring diagram if its not too much trouble. you earned a sub btw great job on your bike

In this video you took the coaster brake off that is all I have used on the rear wheel

Where you buy engine

I try getting my bike registered with the dmv but they say no because is a bicycle I have 5 years of building and riding motorized bike and I thank God I never had no problems with the law. I install the rear tire rain cover and I have no problems with is so far

awesome...

Add a Chinese li-ion battery, preferably a 9ah, long lasting battery.. I use. 12v 3.5ah that last 15 days with bike lights and around 7 days with a motorcycle headlamp LeD bulb.

It seems like if I add more oil ti mix it slows it down a lot but I dnt want to mess engine up .I really dnt think more oil will but shit who knows

My motor has the cc rating on the jug. Its really weird. But its a 50 so thats nice

is the engine on that a pk80?

I see people putting choke on why? My engine start cold with choke wife open every time

It would be considered a moped just saying

I wana ask you opinion about the mechanical speedometer/odometer

Regarding the law: My personal experience of riding MB's for about 4,000 miles (in the Milwaukee, WI area) was cop free. I think if you use some common sense you're fine. I even rode quite a bit of 'walking / biking trails' where I know cops would bust me if I was caught. I tried to be quiet near homes and kill the engine near walkers. Never any interaction with a Karen, either. I now live in northern WI in a town of about 350 people. Not a stoplight around for about 25 miles. I don't think anyone gives a sh*t what you do up here as long as you are on public roads or trails.

you should get a 100% synthetic oil, high octane fuel and a better air filter bc this one sucks a lot, and u could take the tip out of the exhaust to have a really good increase of torque. with all that I'm getting 56kmh in straight, u really should do some tunning ;)

Please please please tell me how to get your bike to idle so good, I can't get mine to idle at all its either too low and it dies or it revs to the moon

Parts description?

I wish we could have two magnetos to power your electricity and to power your spark separate so the lights don’t rob your spark power I assume it would rob it anyway

If possible could you send me links to mag.,CDI, magnet,step down you used. I would greatly appreciate it.

How much and where can I get those collapsible fenders and how much, what are the best ones to get?