Motorized bike new exhaust and ride in the rain!
Рет қаралды 8,501
3 жыл бұрынnew flex pipe exhaust!
@twowheeledadventures 3 жыл бұрын
www.amazon.com/dp/B07W6M2DPV/ref=cm_sw_r_cp_apa_i_O1RoFb72WTS9B. Exhaust link if anyone wants it!
@motorizedbicyclenation53cu90 2 жыл бұрын
Did it add much power at all on torque or more mph
@twowheeledadventures 2 жыл бұрын
@@motorizedbicyclenation53cu90 Nothing noticeable.
@HanzelFonferek 2 жыл бұрын
Thx! I was thinking about buying one! Is it still working pretty good for you?
@twowheeledadventures 2 жыл бұрын
@@HanzelFonferek yep, its actually outlasted the motor and is on a new one now lol
@HanzelFonferek 2 жыл бұрын
@@twowheeledadventures wow! Lol
@sxggaming8518 7 ай бұрын
Keep posting bro 👌
@Lookatthebottom 3 жыл бұрын
That exhaust is slick! and the bike sounds great.
@twowheeledadventures 3 жыл бұрын
Thanks!
@Wwill1569 2 жыл бұрын
all i could hear for half of it was wind😂 but ya
@jerryb1234 3 жыл бұрын
The Hulk strikes again, lol, that has got to be one of the cruddiest 2-strokes I have ever seen, Congratulations!, lol, it just shows that you enjoy it, thanks for sharing.
@twowheeledadventures 3 жыл бұрын
Thanks for watching lol 😂🤣
@quantumbox01 3 жыл бұрын
I have just bought this exhaust for my stock motor, hoping it will give a little boost. currently use a 32tooth sprocket which is way too low so waiting on a 40tooth arriving
@an7d7y 3 жыл бұрын
They are some fun
@twowheeledadventures 3 жыл бұрын
For sure!
@motoguy1586 3 жыл бұрын
Love the throttle setup have the same one and I have the same pipe and its crap wondering if heat wrap will fix leaks
@twowheeledadventures 3 жыл бұрын
Mines not leaking yet but I was worried about that :(
@motoguy1586 3 жыл бұрын
@@twowheeledadventures yea they only last about 2 months before the seams start splitting
@artofdisguy3401 3 жыл бұрын
Pull the cap off the baffle can and pull the baffle out,, helps the top end huge, I just used JB weld to put cap back on. Head bolts break due to unsupported exhausts, the backers work. Drill a 10/32 bolt thru the tensioner and frame to keep it secure
@twowheeledadventures 3 жыл бұрын
Good advice thank you!
@motorizedbicyclenation53cu90 2 жыл бұрын
Get grade 8 mounting bolts and exhaust bolts an ms ya golden
@marcs4091 3 жыл бұрын
That exhaust would sound good on the Phatmoto!
@twowheeledadventures 3 жыл бұрын
Oh I have plans for the phatmoto eventually as well!
@stanleydograu150 3 жыл бұрын
where did you buy this rear view mirror on the left side of the handlebars?
@twowheeledadventures 3 жыл бұрын
Amazon, I sadly don't have a link anymore though as it was on an old account
@stanleydograu150 3 жыл бұрын
@@twowheeledadventures OK thank you! I am Brazilian and I like to watch your videos because it shows different and beautiful places. Just an observation; your motorized bike is very weak on the climb, why?
@stanleydograu150 3 жыл бұрын
@@twowheeledadventures oh, I'm a male person, 😂 I'm just saying this because there may be an error in the google translation 🇧🇷
@twowheeledadventures 3 жыл бұрын
@@stanleydograu150 Its weak because its a pretty steep hill, its hard to tell in the video though, I had a bike with a 56 tooth rear sprocket that would make it up no problem but sold it, also thanks for watching!
@stanleydograu150 3 жыл бұрын
@@twowheeledadventures oh yes, now i understand. the video was very good. liked it
@MetalMaster8888 3 жыл бұрын
Don't use bolts there, just use studs and nuts. You have threaded holes with limited depth, so your bolts just rests on the bottom while you try to tighten the flange.
@heavystarch100 2 жыл бұрын
Did you smear shit on your motor?! 😳
@billrivers2578 3 жыл бұрын
How long have you had this does it last... I just got the bionic viper from amazon looks identical to this one..
@twowheeledadventures 3 жыл бұрын
I haven't used it much my motor blew shortly after this, so I can't speak for its longevity, I like it enough that I will be using in on one of my other bikes shorty though.
@billrivers2578 3 жыл бұрын
Niomi Viper is what I have. How long have you ran yours? Does it last?
@twowheeledadventures 3 жыл бұрын
@@billrivers2578 I only got to run it a few rides lol, I will put it on another bike eventually though.
@artofdisguy3401 3 жыл бұрын
@@billrivers2578 I've have both the niome and the kinbell model, identical , these exhausts all come out the same factory, mine have been on and off different motors for 2 yrs now
@breezetixmoto 3 ай бұрын
now you're triggering everyone with OCD with that handlebar setup lol wtf
@twowheeledadventures 3 ай бұрын
Lol 😆
@billrivers2578 3 жыл бұрын
Did you lose any top end speed? Compare to stock exhaust???
@twowheeledadventures 3 жыл бұрын
It stayed about the same honestly
@DesMck36 2 жыл бұрын
Geez bro, what did you do to that to need all of that JB weld ? LOL
@twowheeledadventures 2 жыл бұрын
Even after fixing all this a year later I still call the bike "JB" lol 😂
@Wwill1569 2 жыл бұрын
could u review a potato pipe
@SmokeyVlogs 3 жыл бұрын
me : its raining outside , cant go ride .. meanwhile austin is like rain? haha water cooling !
@twowheeledadventures 3 жыл бұрын
Add some soap and its a free shower!
@michelmullaney3641 3 ай бұрын
It’s actually pronounced Poe Poe not pooopooo
@twowheeledadventures 3 ай бұрын
I might be stuck saying poopoo now lol 😆
@robertkgunn 2 ай бұрын
It’s poo poo
@danpen717 2 жыл бұрын
AT THE END FLYING BY CARS
@robertkgunn 2 ай бұрын
That is the nastiest bicycle engine I’ve ever seen lol
@twowheeledadventures 2 ай бұрын
It's nickname was JB from all the JB weld lol 🤣
Hughes Motorized
Рет қаралды 97 М.
HyperDash Garage
Рет қаралды 7 М.
Motorized Bike Jackshaft. What it does and how it does it *Viewer Request* Hill Climb and Speed Test
Motored Life
Рет қаралды 196 М.
BikeBerrycom
Рет қаралды 11 М.
Barrios Builds
Рет қаралды 90 М.
BikeBerrycom
Рет қаралды 9 М.
Funny Animal World
Рет қаралды 28 МЛН
Layara
Рет қаралды 12 МЛН
Влад Закроев
Рет қаралды 3,6 МЛН