How To Install a Motorized Bike Kit! Installing a Motorized Bike Kit Walkthrough!

Рет қаралды 95,135

2 жыл бұрын

in this video, we install a motorized bike kit from amazon onto my buddy's bikes. he has been wanting a bike ever since he rode mine. and now he has one. the build went very smoothly!!!
Motor Kit
www.amazon.com/IMAYCC-Bicycle...
SUBSCRIBE ➡️➡️ / @barriosbuilds7688
If your in the mood to check out some of my other builds/projects click here!
Trike Build
• New MOTORIZED Build
Jack shaft Kit
• Motorized Bike Jacksha...
Pull Start
• Motorized bike Pull start
Once again thank you for watching this video, hope you have a good one!!
Music
New Road by Ghostrifter Official bit.ly/ghostrifter-sc
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/3mDCzhT
Music promoted by Audio Library • New Road - Ghostrifter...

Пікірлер: 320

@Evan-lr8nq 7 күн бұрын

Off topic, but that is a nice looking neighborhood. love the brickwork.

@ShapdCrusadr 7 күн бұрын

Instead of using the included rear sprocket mounting system that comes with those bike engine kits. Instead get a Rear Hub Adapt it clamps on the center hub of the wheel it's very simple to install and will be 100% true straight once installed.

@jestnutz 3 ай бұрын

That neighbour hood be looking real crisp. Good to see the lawns chopped. Bike looking and running good, time to mow my lawns and build a bike.

@Evan-lr8nq 7 күн бұрын

I thought the same things. And the brick worked houses are nice too.

@edselbobpacer 5 ай бұрын

Ty and u helped me to have the confidence to build one

@EverythingOffRoadOfficial 10 ай бұрын

Best video I’ve seen on how to build one of these

@JorgeRodriguez-ei2gi Жыл бұрын

Great builds Mr barrios& well,explained.

@user-fc1zs1wh9g 10 күн бұрын

lol ...well explained?...this guy needs to learn how to talk i cant even count how many times he doesn't know what something is called and sits there for 10 seconds trying to think of it i just turned off the audio...makes it easier to follow

@user-fc1zs1wh9g 10 күн бұрын

fuel on off switch? its called a petcock and the gas tank mounting brackets are called brackets... if you can believe that ..hahahahahaha this guy omg

@user-fc1zs1wh9g 10 күн бұрын

dude you have to cut the chain that's not meant to be a chain tensioner its a guide so it stays on the sprocket

@barriosbuilds7688 10 күн бұрын

Does it matter though? I don’t think there is another part in the box that stops fuel from going to the carb. Same with the gas tank brackets, if I just said brackets someone could have mixed it up with the engine mounting brackets.

@IanSchreckengost 2 күн бұрын

Thanks for doing the turn over ogf camera now i have no idea how to do it, total big brains

@barriosbuilds7688 2 күн бұрын

Huh?

@XxNateqazxX Ай бұрын

Thanks bud. For real. I thought i got the wrong size bike lol i got the bolts on backwards for the back sprocket

@sarahkem2628 7 ай бұрын

OK so you were like totally amazing. I am getting ready to make my old Schwinn stingray bike back into a gasoline bike what are used to have that somebody stole. Your video is amazing and I’m literally going step-by-step and the camera work is good and so far so good on my attempts even without a lot of experience, I am currently getting ready to go into the fuel line part. I hope I’m in the homestretch

@barriosbuilds7688 7 ай бұрын

Thanks! Once you get the chain you’re good, the chain in my opinion is one of the hardest parts. Just make sure your sprocket is true, like in the video when I spun the wheel on the bench.

@randyhollis1217 2 ай бұрын

Thanks for being so precise the instructions booklet I got was a little confusing with the instructions and pictures

@Crossaintman 19 күн бұрын

For real

@conraddcruz 2 ай бұрын

Very nice ... getting one very soon and will follow the instructions to the letter ... 🤣16:40 😁

@normanwray1341 9 ай бұрын

That a good idea clutch.

@arnobashtar6707 Жыл бұрын

Love the zip tie trick, ingenious.

@BossMan-yu1og 10 ай бұрын

Is the gear shifter for the rear derailleur included with the clutch handle or is it standalone? Also, with the front derailleur disconnected, which sprocket do you recommend leaving the bike chain on for maximum speed and efficiency when the motor is not in operation?

@SurfWitch-yz1ux 7 ай бұрын

No is not

@818adventures 2 күн бұрын

That's a "round slide " carburetor. Round because of it's shape they also have "flat slides" as well . And The gas on/off switch is called a "Petcock"

@DeadSharkOG 10 сағат бұрын

Yo was good man I just got a new chain today but the adapter comes on Sunday. So what I’m going to try and do for now is just to try and straighten the sprocket until it comes. Just so I have shit I can do on my day off 😂. I’ll of course keep you updated and I’ll tell you when or if I works and how well it performs with the upgrades I made already

@chrishenniker5944 9 ай бұрын

Can you get speed equipment for stuff like this, like a supercharger for a four stroke engine?

@barriosbuilds7688 9 ай бұрын

You can put all kinds of mods, I think it’s a fun part of the hobby. Exhausts, intakes, carburetors, heads, reed valves, etc. and they are a blast to ride.

@Steadyglok 18 күн бұрын

Would this engine fit on a occ schwinn stingray?

@ChaseFromSpace Ай бұрын

Did you have any after market parts like the spark plug or carb? My carb keeps flooding and thinking about getting a new one

@barriosbuilds7688 Ай бұрын

No, this one is stock. And after the mods that we’ve done to this bike. We still kept the stock carburetor, maybe a little jetting but that’s it.

@KillPsychoProx 23 күн бұрын

question what fuel and oil mix do you use. what type of fuel and oil whould also be handy to know.

@barriosbuilds7688 23 күн бұрын

I just buy the true fuel brand 40:1 and throw it in the gas tank, I’m too lazy to mix it lol. And it’s convenient to ride to the hardware store and pick up a can.

@muppy3472 Жыл бұрын

So I'm getting this kit on Amazon would the upgraded chain tensioner its black and spring loaded as well as the ignition could up grade are any of this any good

@barriosbuilds7688 Жыл бұрын

Honestly the stock ignition is plenty for this motor, it’s reliable and I wouldn’t change it. Ur the chain tensioner yes! That is an amazing upgrade for this kit. It’s a lot more reliable and safer than using the one provided.

@muppy3472 Жыл бұрын

@Barrios Builds ty very much I can't wait if I run in to any issues I'll just post em here u seem to know your stuff very informative and ty for responding

@thomasshearer5735 7 ай бұрын

I have a question? When i finally put everything on the bike and tried to start it by pedaling then everything else. But the bike wouldnt even let me pedal, so i got someone to tow me as i pedaled. This started the engine and i could pull the accelerator and get some action going but as soon as i lost speed and momentum from the person towing me. It would turn off, this happened three time and on the third time it knocked the he chain off, popped my tire, and i ended up drifting. How do I fix this because I really want to my bike?

@barriosbuilds7688 7 ай бұрын

Sounds like your clutch is locked up, or something. Check the handle and make sure when you pull the lever the arm on the clutch moves. If it doesn’t you’ll need to adjust the flower nut under the clutch cover. Sometimes they won’t be adjusted correctly from the factory.

@UFO.UAP.areFake.balloonsLED 2 ай бұрын

did you get it fixed

@annaberger453 11 ай бұрын

Was the exhaust pipe from a different kit? I’m worried I’m going to run into the same issue with my bike

@barriosbuilds7688 11 ай бұрын

Yes it was, he just wanted a black one but it didn’t fit. But the stock one was perfect.

@Gramma_Is_pissed 11 ай бұрын

Great video! I am now confident I can do this ❤️

@muppy3472 Жыл бұрын

Any recommended gaskets for the engine I ripped the felt trying to check for saving marks I used silicon for now 😮

@barriosbuilds7688 Жыл бұрын

Amazon is where I get my gaskets

@muppy3472 Жыл бұрын

@Barrios Builds what about that mixture where did u get that can I get that at Walmart or Napa or something

@barriosbuilds7688 Жыл бұрын

I just get the 50:1 two stroke mix… probably not a good thing to run in these engines. But they are cheap🤷‍♂️

@muppy3472 Жыл бұрын

@@barriosbuilds7688 ty man

@Voidesth 9 ай бұрын

Hey should my chain be tight around the sprocket or slack? My chain keeps clasping together

@danielalexspark 8 ай бұрын

The chain should have a little bit of play or slack, but it should not be overly loose or overly tight.

@Voidesth 8 ай бұрын

i think i messed up its on a kent city bike i took off a couple chains....@@danielalexspark

@petercomix8364 Ай бұрын

What size frame would be good for this motor on a bike? What kind of bike should I get?

@barriosbuilds7688 Ай бұрын

Mountain bikes are my favorite because you can go off road. But sadly this frame is discontinued. I’d just take a tape measure to Walmart, lol exactly what I did with these.

@socialmediaego Ай бұрын

So the exhaust from the actual kit didn’t work initially or ? I’m just confused about that part before I buy this kit. Thanks.

@barriosbuilds7688 Ай бұрын

Yes the exhaust that came with the kit worked perfectly. He just wanted the spare I had on hand, but it didn’t end up working. So we just used the exhaust that came with the kit.

@socialmediaego Ай бұрын

@@barriosbuilds7688 Thanks for response.

@user-ub4gx6we2n 8 ай бұрын

hi i have the same engine but i cant get it to spark .?

@slimkim3046 6 ай бұрын

the pedal always seems to get in the way with the exhaust no matter how i adjust the engine. Any tips ?

@darrellmcquay9808 6 ай бұрын

Screw it’s down to a work bench or piece of wood, use a propane torch to heat it up and twist it with channel locks to get to to where you need it for clearance

@BunnyFooFooOG Жыл бұрын

Thanks for the video, now my husband won't have to help me put my motor on my bike and I get to play mechanic while he's being an atual mechanic at work... 🤣 Love the '60s bush porn music in the background, adds a touch of class to the video... 🤣

@JaxsonThomason 5 ай бұрын

how long did it take u and was it hard to do ?

@BunnyFooFooOG 5 ай бұрын

@@JaxsonThomason the motor turned out to be junk, I got a different brand and it looked exactly like the one I got but with way better parts... It took me roughly an hour and 30 minutes to get it together...

@UnorthodoxGenius 7 күн бұрын

THIS VIDEO IS A FUCKINGGGGGG MASTERPIECE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@MarkoYolo 11 ай бұрын

can i install this on my mountain bike i have a trek hybrid with dual disc breaks. would the breaks be in the way?

@barriosbuilds7688 11 ай бұрын

Disc brakes yes, unless you modify them!

@MarkoYolo 11 ай бұрын

@barriosbuilds7688 thanks.

@keeganhache6667 2 жыл бұрын

Great job man! We need more people like me and you making bike videos

@DeadSharkOG Ай бұрын

Hey man one more question, can you list some upgrades I can do that will effect the performance of the bike? Like upgrades to go faster? Or more miles?

@barriosbuilds7688 Ай бұрын

Exhausted with an expansion chamber, carburetor, racing head, and smaller sprocket for speed. Don’t get a smaller sprocket if you live near hills. Sometimes the stock carburetor is best, and it’s cheap to fix.

@brianrizzi6321 Ай бұрын

Usually those Chinese engines need a 30:1 2cycle mix. How’s that engine doing a year on with the 50:1? Very interested

@barriosbuilds7688 Ай бұрын

The manual says that but that’s really bad and probably smokes a lot. For this bike we’ve always used 50:1 from break in and still using 50:1, this bike has a lot of miles on it and it’s still running great! I use 40:1 on my other bike though mainly because of its best. But this bike is my friends bike and he’s always used 50:1 and doesn’t want to change it.

@prodlowkey Ай бұрын

me and my mate already built mine but I'm only watching for some additional knowledge, typically id be bored shitless but you guys have managed to make this video super informative, interesting and entertaining. Well done, definitely will be watching more.

@russellswain2675 27 күн бұрын

Hey I have a bike I’m having trouble finishing it’s a beach cruiser with a 100cc motor I can send you pictures and stuff how much would it cost me for you to finish it

@AJthrasher 5 күн бұрын

Hey, Im on the edge of buying one of these kits, is there gears just like dirtbikes and how loud is it? Do you think it’s loud enough to go down bike trails and neighborhoods? Thanks!

@barriosbuilds7688 5 күн бұрын

lol if you ride dirt bikes, you will hate this. They are slow, they only have one gear etc. the sound level (stock) is about equivalent to a weed eater. And did I mention they are slow? lol ya the only upside these bikes have over a dirt bike is that you can get away with riding them in a neighborhood. If your exhaust is stock or modified but quiet. They are just so fun to ride and then work on. My bike currently goes 40 but after a lot of mods like balancing the crank and a bigger carburetor and stuff like that. But this bike is for my friend and he kept his mostly stock and still runs good to this day. It tops out at about 30 ish. Both bikes are fun neighborhood cruisers, not really built for speed.

@AJthrasher 5 күн бұрын

@@barriosbuilds7688sounds cool! I ride electric bikes that go 28 mph. I want to get something kinda legal to ride down trails and in some parts sidewalks, do you think I could get a legal 50cc or not legal 80cc 😂 and make it go 30 mph? Thanks for the quick response!

@barriosbuilds7688 5 күн бұрын

@@AJthrasher when you order a kit order the 80cc because they are almost exactly the same. It’s just branding. And a cop can’t tell that it’s over 50cc unless they remove the head. So just say it’s 49cc lol. But stock after break in it should go about 25 - 30 depending on rider weight.

@Wablito 17 сағат бұрын

Did you have to cut the chain? I have the same kit and I think my chain is too long

@barriosbuilds7688 15 сағат бұрын

Yes you will need to cut the chain. They give you a lot to accommodate larger frames.

@ChaseFromSpace Ай бұрын

I just finished mine but when I put the chain on the back wheel just doesn’t turn. Any clue why?

@barriosbuilds7688 Ай бұрын

The only way for the chain to move when the motor is off is when you pull in the clutch, you should be able to walk with the bike while holding the clutch. If not, check to make sure your clutch is adjusted properly, and that your chain isn’t too tight.

@thedankesttendie7745 Ай бұрын

Good job for explaining how to turn over the mi Motor ididot

@barriosbuilds7688 Ай бұрын

Take off the gear cover, turn over the sprocket with a wrench. Welcome Sincerely Idiot

@09mantlek 10 ай бұрын

Hey what size frame was this? (measurement from pedal crank to bottom seat post? My friend wants one but they are very small. Mines on a 20" frame and it fits fine, I'm wondering what the smallest you can get to is?

@DeadSharkOG Ай бұрын

Hey man if I was gonna do that with my bike does the weight limit matter? If I put all that on the bike and I ride it (I’m 235) would it take a big hit?

@barriosbuilds7688 Ай бұрын

Short answer yes, and I mean that in the nicest way possible. I’m 170 after a good lunch and I rode this bike after break in and I topped it out at 32 ish. You definitely would want to upgrade the exhaust, check out the video on my channel about exhausts. It’s a huge performance upgrade.

@DeadSharkOG Ай бұрын

@@barriosbuilds7688 gotchu

@DeadSharkOG Ай бұрын

@@barriosbuilds7688 what does upgrading the Carburetor do?

@kakabukkake0 Жыл бұрын

This is a dumb question but how loud is it? I got the impression these were just wayyy to loud to run in any suburban neighboorhood-

@barriosbuilds7688 Жыл бұрын

Meh, they aren’t quiet. But I’d say you can hear it coming down the road, about equivalent to a weed eater.

@mountainrun 3 ай бұрын

NO! Do not notch into the frame for the exhaust.

@barriosbuilds7688 3 ай бұрын

Oh ya no that was a joke, it would fold like tin foil!

@carloscamano2483 Жыл бұрын

I have. Aproblem. When i arm . The Chain part. The engine is locked. So i cant install the Chain. How to free the engine????

@UFO.UAP.areFake.balloonsLED 2 ай бұрын

maybe if you spoke English we could help

@DeadSharkOG 15 күн бұрын

Hey bro I just bought my kit. It comes on Sunday. I bought the 100CC version of this kit. Is there really any noticeable differences? Just asking tbh.

@barriosbuilds7688 15 күн бұрын

Yeah, the entire jug assembly is different. And I’ve heard people have problems with them. If it’s not too late I would still get the 80cc version. Just a personal preference, but I don’t know much about the 100cc

@DeadSharkOG 15 күн бұрын

@@barriosbuilds7688 Ah okay, it’s too late but push come to shove is there just anyway I can just buy the 80CC engine by itself just in case?

@barriosbuilds7688 15 күн бұрын

@@DeadSharkOG yes, most of the parts from the 100cc kit should bolt on to the 80cc motor. Only thing that might not work is the exhaust and intake manifold. But most 80cc engines come with intakes.

@DeadSharkOG 14 күн бұрын

@@barriosbuilds7688 gotchu thanks for all your help

@merlinknight6422 Жыл бұрын

Can you install 50cc motor on mountain bikes with rear disk brakes

@barriosbuilds7688 Жыл бұрын

Yes, you just need a spacer that goes in between the sprocket and the brake disc. And then I think a custom mount for the caliper. A lot of work, but it’s in the plans for one of my builds.

@merlinknight6422 Жыл бұрын

@@barriosbuilds7688 I've got the motor saved to buy most bikes here have disk brakes and don't shift anymore at the crank so I'm still hunting down a 21 speed mountain bike they have a 18 speed but I'll b going across the US and there's lots of hills to climb

@DeadSharkOG 21 күн бұрын

Hey man I’m buying my kit next week but I’m going for the 100CC one. I have a question about it though. When they say this “Fuel type: 90#, Mixing Ratio of Fuel and engine oil: 16:1 for new equipment, 20: 1 the run-in period (after running 500km)” I don’t understand what kind of fuel that is especially when I don’t know anything about gas or different types of gas. Can you help?

@DeadSharkOG 21 күн бұрын

Can I still use the 40:1 gas?

@barriosbuilds7688 21 күн бұрын

Yes, don’t listen to the manual. The engine will smoke to death and won’t actually break in properly. Pretty much burning oil. Just use 40:1, even on first start.

@DeadSharkOG 21 күн бұрын

@@barriosbuilds7688 alright thanks man.

@DeadSharkOG 21 күн бұрын

@@barriosbuilds7688 oh wait ONE MORE QUESTION 💀. Do I have to drill a hole into the handlebar for the throttle thingy? I seen someone else just get pliers and snip the thing inside of the throttle thing is that okay?

@barriosbuilds7688 21 күн бұрын

@@DeadSharkOG depends, sometimes you’ll get a metal one and you can’t snap it off. But It’s best to drill the handle bar. Because the entire throttle assembly will twist if you don’t. But it might work if you tighten the Jesus out of it.

@no830ahgaming9 9 ай бұрын

How do I put on the rear sprocket with disc brakes

@barriosbuilds7688 9 ай бұрын

You’re gonna need a spacer that goes between the sprocket and the disc brake. And then figure out some way to mount the caliper. It’s in the plans for me, and I’ll be sure to make a video on it. I already have all the parts.

@DeadSharkOG 4 күн бұрын

Hey man bike works idk if you’ve seen my other comment. But here’s the thing I rode it for a couple mins then the chain snapped as I was going up hill and downhill

@barriosbuilds7688 4 күн бұрын

The sprocket probably still isn’t perfectly straight.

@DeadSharkOG 4 күн бұрын

@@barriosbuilds7688 Fuck okay well I ordered a new chain on Amazon. Can you be the judge and tell me if it’s a chain that fits? It’s called a 415H 110L motorized bicycle then it says it’s compatible with 49CC up to 80cc. Will that be okay for a 100CC engine?

@DeadSharkOG 4 күн бұрын

@@barriosbuilds7688 also the sprocket needs to be as tight as possible right?

@barriosbuilds7688 4 күн бұрын

@@DeadSharkOG should be the same sprocket included with the 80cc and 49cc engine kits. So I’d assume it would work.

@barriosbuilds7688 4 күн бұрын

@@DeadSharkOG not too tight or you’ll strip the bolts. Just needs to be straight.

@nickmeyer7771 Жыл бұрын

I just ordered this exact kit. Did it come pre greased?

@barriosbuilds7688 Жыл бұрын

Yes everything came with some sort of grease, but I would still double check the bucking bar. Because it only came with a thin coat on this kit, may be different for yours.

@nickmeyer7771 Жыл бұрын

@@barriosbuilds7688 okay thank you. About how fast have you had it up to? I'm building mine for speed. I weigh only 140 and am gonna put a 32 sprocket on mine.

@barriosbuilds7688 Жыл бұрын

Funny enough that’s about the same specs as my buddy, the owner of this bike. It topped out at about 32. And we did a few more mods to it and got 35 out of it. You can find a couple rid videos on my channel. Just make sure you do the complete break in, and it will do great!

@nickmeyer7771 Жыл бұрын

Shit idk if this even fits my frame😭. I already ordered it so I guess I'll see when it gets here. What bike frame is that?

@barriosbuilds7688 Жыл бұрын

Oh good luck, finding mountain bikes is hard. This I just a Walmart special, They don’t make them anymore though.

@damianking2065 Ай бұрын

My 2 cents from my experience. 25:1 always. Dont even hook up Killswitch, choke out to turn off. No back discs. Bit of correct size radiator hose be your best friend to get carby to fit even on big frame bike. Dont even use supplied spark plug. Stock exhaust is the best. Grip shift gears. Always wear helmet, cause when front tyre escapes from rim at 65kph you will be thankful. Until that day it finally destroys your bike, youll have a blast

@barriosbuilds7688 Ай бұрын

I’m gonna have to agree with you on the spark plug, and the helmet. But that’s it. I will always run 40:1 in my bikes. 25:1 I bet that bike smokes a lot! This bike belongs to my friend and he’s been using 50:1 since it was built, we ride regularly and the bike seems to be doing great! As for the stock exhaust, it’s terrible. Check out the idle short in front of the pool on my channel. That exhaust setup is the best, I also did a video on it.

@alexwardenburg6099 Ай бұрын

What bike should I use

@barriosbuilds7688 Ай бұрын

I like mountain bikes because it makes a great trail bike. These are just cheap Walmart bikes, and I loved them but they got discontinued. Currently still using these frames and don’t plan on changing.

@AlShams69 Жыл бұрын

Please tell me what type of gas to use I know the oil ratio is 16:1

@barriosbuilds7688 Жыл бұрын

Just regular 87 I believe, then mix your oil with the gas. I always buy that pre mix stuff, but you can get more out of your engine by using your own mix. Because you can use your own ratio.

@AlShams69 Жыл бұрын

@@barriosbuilds7688 oh alright another person was saying premium but I’m not sure

@barriosbuilds7688 Жыл бұрын

@@AlShams69 I wouldn’t worry about it. In the end you may get better performance, at least that’s what the 4 stroke guys say. But I’d just stick with 87. Cheap, reliable, etc.

@AlShams69 Жыл бұрын

@@barriosbuilds7688 gotchu sir and what type of grease do you recommend for the bearings and etc

@barriosbuilds7688 Жыл бұрын

@@AlShams69 honestly, I don’t think it matters. I’ve used white lithium, bearing grease, etc. just be sure the bucking bar and ball are greased, probably the most important part for greasing.

@sofakingwetaughted 4 ай бұрын

Did I miss when he did the kill switch? I can’t figure out where it goes

@barriosbuilds7688 4 ай бұрын

The kill switch and the throttle handle are one unit so if you installed the throttle handle and cable then all you have to do is wire just plugs into the motor. Black with black and blue with blue (sometimes it’s red).

@wilstocken3897 3 ай бұрын

What did u do with the white wire

@barriosbuilds7688 3 ай бұрын

Disregard the white wire, it is for accessory lights etc. your engine will run fine without it, some people just cut it off.

@Perses-_- 2 ай бұрын

What's the max speed on one of those

@barriosbuilds7688 2 ай бұрын

Maybe 30-35. With mods it will go faster.

@DeadSharkOG 13 күн бұрын

Yur Wasup man my kit comes tomorrow. I’ll be using your video as a helpful tool thanks for everything man. Also I bought a better spark plug as well man. Idk if that does anything but I got a B7HS NGK spark plug from what people are saying it’s good. Good for what? I have no idea 😂. But it was $5 so it’s cool.

@barriosbuilds7688 13 күн бұрын

Thanks! I don’t think it adds more performance, but it will definitely last longer.

@DeadSharkOG 10 күн бұрын

@@barriosbuilds7688hey Wasup man I’m in the middle of doing this thing but I don’t have clippers to cut in the middle of the black tire thingy. Is there anything I can cut it with?

@barriosbuilds7688 10 күн бұрын

@@DeadSharkOG saw, anything just to split one of them.

@DeadSharkOG 10 күн бұрын

@@barriosbuilds7688 can a knife work? I don’t really have the necessary tools tbh.

@DeadSharkOG 10 күн бұрын

@@barriosbuilds7688 alright I’m just gonna bring the tire thing to the hardware store so I can just use a free saw for a second lol. I’ll be back when I’m done.

@ChaseFromSpace 2 ай бұрын

Do you have to take off the gear shifter or no?

@barriosbuilds7688 2 ай бұрын

I did take off the center one but I kept the rear on. I just moved the shifter to the other side of the handlebar.

@ChaseFromSpace 2 ай бұрын

@@barriosbuilds7688thx for responding so quick, do you need to use the zip ties for the back tire

@barriosbuilds7688 2 ай бұрын

@@ChaseFromSpace no problem, you don’t need to. But it would help make sure the sprocket is centered.

@Fosterdana 4 ай бұрын

will this fit specialized mountain bike xl men

@barriosbuilds7688 4 ай бұрын

As long as the engine will fit in the main frame of the bike, you will be good. I like to go to Walmart with a tape measure!

@Gramma_Is_pissed 10 ай бұрын

When I pull the other side of the carburetor cable, nothing happens. Yes, I installed everything correctly. Help?

@barriosbuilds7688 10 ай бұрын

Make sure the throttle cable barrel is installed inside the little hole on the bottom of the slide. That will make the slide move up and down.

@Gramma_Is_pissed 10 ай бұрын

@@barriosbuilds7688 yep, did that. Ugh. Gonna take it apart and look at it. Thanks for your reply

@Gramma_Is_pissed 10 ай бұрын

Okay, everything is correct, still no movement. Is it possible its defective?

@barriosbuilds7688 10 ай бұрын

@@Gramma_Is_pissed that’s weird, I’ve personally haven’t had one to be defective. But I’m sure it’s possible. Just that barrel should be in the notch on the sleeve. And if you pull the other end of the throttle cable the sleeve should move up and if you let go the spring should bring it back down.

@Gramma_Is_pissed 10 ай бұрын

@@barriosbuilds7688 yep, but it doesn’t. I swear, Ive had nothing but problems with this kit, bout ready to throw it thru the window

@ChaseFromSpace 2 ай бұрын

What fuel did you usev

@barriosbuilds7688 2 ай бұрын

Premix 40:1, from the second you start it to the second you blow it up. Don’t listen to the manual. It’s quite common to use 40:1.

@philrose7716 5 ай бұрын

How fast will this bike go?

@barriosbuilds7688 5 ай бұрын

After break in this bike went about 30mph please be sure to break in the motor before giving it full throttle.

@JaxsonThomason 5 ай бұрын

what is the top speed on the 80cc

@barriosbuilds7688 5 ай бұрын

This kit stock after break in, topped out at 29-30. Now after a new mods it goes about 35.

@DeadSharkOG 7 күн бұрын

Yo dude I built the kit onto the bike but my rear wheel isn’t moving. It moves when I take the chain off of the sprocket connected to the engine but when that is on the crank that you gotta put the chain around in the engine it won’t turn or anything man. Plz help. Idk if it has to do with something about it raining last night near me and it got wet but plz help

@barriosbuilds7688 7 күн бұрын

Check to see if the clutch is fully disengaging

@DeadSharkOG 7 күн бұрын

@@barriosbuilds7688 the clutch works idk what else it js

@DeadSharkOG 7 күн бұрын

@@barriosbuilds7688 yeah man the clutch is working I’m pretty sure. It feels like it’s working. So I need to put grease or degreaser on the chain maybe? Idk. When it rained last night I looked at the chain and sprocket and it had a little bit of yellow ish orange on it. Idk if that’s rust forming but could that be it? Do you have any social media I can send you pictures on?

@barriosbuilds7688 7 күн бұрын

@@DeadSharkOG it might be rust but a long as the chain is able to move then the tire should move. Next I would check the gear cover take off the cover to the gear and make sure the chain is on right, sometimes they get bunched up. If that’s not the case take the clutch cover off and check to see if the clutch is fully disengaging.

@DeadSharkOG 6 күн бұрын

@@barriosbuilds7688 okay when I get home from work I’ll check the gear. The gear is that large screw thingy that’s on the other side of the engine right? Where the engine is?

@luiscarranza9625 6 күн бұрын

My bike does not ride smooth after I install the kit?? What could be the problem?!!😢

@barriosbuilds7688 6 күн бұрын

I mean they definitely won’t ride smooth. There are so many vibrations coming from that motor. And depending on the frame with the bumps and motor vibration, it can make a very rough ride.

@ry-bread242 Жыл бұрын

Did yours come with a sprocket? Mine didn't

@barriosbuilds7688 Жыл бұрын

It should, I would contact whoever you purchased it from. Or pick one up… if you want the 36 tooth sprocket is a good upgrade for lighter riders. Will give you more speed than stock, but sacrifices a little more torque.

@ry-bread242 Жыл бұрын

@@barriosbuilds7688 oh okay, thank you!

@redbaronvonrichthofen4476 2 ай бұрын

I the IMAYCC 2 stroke 100cc truly 100cc?

@barriosbuilds7688 2 ай бұрын

I call them 80cc engines, although I could be wrong because sellers advertise 49cc through 80cc. There is an actual 100cc engine but the cylinder and head look almost nothing like this. But if yours looks somewhat like this engine you’ve got that 49-80cc engine.

@shynenunez33 11 ай бұрын

How long did this take to do

@barriosbuilds7688 11 ай бұрын

I wanna say about 4 hours… but without filming I could have done it in 3.

@shynenunez33 11 ай бұрын

What type of shop does this work I can not find 1

@dom2751 Жыл бұрын

The chain doesn’t even stay on and it locks up when you go to start it the engine sucks. I was expecting it to be a fun thing but it turned out to me breaking almost everything on my bike

@barriosbuilds7688 Жыл бұрын

Make sure your sprocket is lined up, there shouldn’t be any wobble. And look at the chain from the back of the bike, there shouldn’t be any bends just needs to be straight from the sprocket to the motor. Also get a good start, you need to have a pretty decent speed before you let the clutch out to start it. These things are a blast just take it easy on your first few runs.

@extrarockersworld8271 6 ай бұрын

What type of bikes will it fit on 8:56

@extrarockersworld8271 6 ай бұрын

Also is the actual lever on the engine the clutch is it supposed to be really loose

@barriosbuilds7688 6 ай бұрын

I really like to use mountain bikes because they can go off road comfortably, but for the clutch lever it can be loose but as long as the clutch fully disengages and engages your good. You can adjust the flower nut on the other side of the bike under the cover if needed.

@extrarockersworld8271 6 ай бұрын

Thanks

@extrarockersworld8271 6 ай бұрын

163$ au pretty cheap

@extrarockersworld8271 6 ай бұрын

I’m 11 and my dad and I are making a motorised bike

@Westhelockpicker Жыл бұрын

if it wasn't for the throttle I wouldn't even use a kill switch and you should buy the new tensioner it's much better

@barriosbuilds7688 Жыл бұрын

Honestly same… and tensioner is in the plans!

@c.rutherford Жыл бұрын

is there a link to the new tensioner? The plastic sleeve on the throttle for my kit was a little loose in the handle, I don't like that but can't figure out what to do about it. I could wrap tape on it before slipping it on but it will gum up surely.

@Westhelockpicker Жыл бұрын

@@c.rutherford just look up black spring loaded tensioner but if I could do it over again I would get the arch tensioner

@c.rutherford Жыл бұрын

@@Westhelockpicker did you have problems with the black spring loaded tensioner? Which kind did you get

@Westhelockpicker Жыл бұрын

@@c.rutherford I have the black spring loaded tensioner just like I said and the only problem with it can be solved with lock tight. The lever that the wheel bolts to will come loose so I just put lock tight on it but the arch tensioner is better. If it would ever break it can't go in your spokes. I already ordered it and I ordered a zeda 80 too

@jrock420cfh 2 ай бұрын

In all fairness, the fuel filter does kinda look like a titty. But seriously, thank you for the video. I bought the exact same engine a year prior to using your video to instruct me how to assemble it. Other than that, I couldn't find instructions no matter where I looked on the internet. The book that came with the engine is pretty much useless because of the very vague instructions, unless you are familiar with building small engines. However, I am not so your video saved the day. Great job bro thank you

@JaxsonThomason 5 ай бұрын

what should i expect going into rhis

@barriosbuilds7688 5 ай бұрын

It’s fun to build them, and once you build it they will run for a while and then you’ll need to maintenance like grease bucking bar etc and sometimes have to fix things. These motors aren’t reliable at all. But that’s the fun part, working on them adding Performance mods to make them faster is fun. And it’s a good way to learn the basics of an engine.

@JaxsonThomason 5 ай бұрын

@@barriosbuilds7688 and about how fast does the it go i bought the same one 80cc

@dejionmustard1746 11 ай бұрын

How do I start it ?

@barriosbuilds7688 11 ай бұрын

Hold the clutch, get pedaling a good speed. Then let the clutch out, it will turn over the motor and start it.

@ChaseFromSpace 2 ай бұрын

What kinda bike is it?

@barriosbuilds7688 2 ай бұрын

Roadmaster Granite Peak, they don’t make it anymore. I wish they did because it was a cheap Walmart bike. Still holding up to the abuse to this day!

@viceeqm2900 Ай бұрын

what bike it this

@barriosbuilds7688 Ай бұрын

Roadmaster Granite Peak, this specific model has been discontinued. But if you can find one, it’s a perfect frame for a motor.

@darrinfry2251 Жыл бұрын

36 tooth hub assembly avoids all of this

@normanwray1341 2 ай бұрын

Hello righting down all your bolts with nuts 😅

@s.s.s4526 Ай бұрын

Name of this kit ?

@barriosbuilds7688 Ай бұрын

IMAYCC 80cc bicycle engine kit (on Amazon)

@DeadSharkOG Ай бұрын

What gas does it take?

@barriosbuilds7688 Ай бұрын

I would use 40:1 2-stroke gas mix. That is what I’ve been running for years. This bike runs 50:1 and has no issues.

@DeadSharkOG Ай бұрын

@@barriosbuilds7688 I don’t understand the gas thing? Is it a labeled gas? Like diesel? Can I get gas from a gas station.

@DeadSharkOG Ай бұрын

@@barriosbuilds7688 idk what gas that is can I get gas from like a gas station for it? Is it diesel? I don’t understand gas stuff 😭

@barriosbuilds7688 Ай бұрын

@@DeadSharkOG these are 2-stroke engines, they require lubrication when running. Or else the engine will lock up. You can get pre mixed cans of fuel at hardware stores so you don’t have to mix the fuel yourself. This is what I do so I can just pour and go. Otherwise you will need to get gas from the pump, then measure and add your own two stroke oil mix to the gas. But lookup the brand “True Fuel”, they make a green 40:1 can that they sell at most hardware stores. And that will be perfect to run as fuel.

@DeadSharkOG Ай бұрын

@@barriosbuilds7688 how many miles does it go?

@dustinplee5067 Жыл бұрын

Did you cut the chain or did you not cut the chain

@barriosbuilds7688 Жыл бұрын

I did, using a chain break it’s pretty easy.

@dustinplee5067 Жыл бұрын

@@barriosbuilds7688 how many pieces of the chain did you cut off

@barriosbuilds7688 Жыл бұрын

@@dustinplee5067 oh I don’t remember, maybe 6-10 it’s different for all bikes.

@dustinplee5067 Жыл бұрын

@@barriosbuilds7688 how many do you think I should cut off on a single speed beach cruise bicycle

@dustinplee5067 Жыл бұрын

@@barriosbuilds7688 and after I put the chain on it won’t roll the tire when I try to roll the bicycle the back wheel just locks up and what’s to slide on the ground how can I fix that and when I flip the bike over and move the wheel it wants to act like it’s going to start but when I put it on the ground it just skid on the ground

@JudeTheYoutubePoopersubscribe 5 ай бұрын

How would this compare to my 1500 watt electric bicycle? That thing tops out at around 35mph but the range isnt that good when going that speed. So i want to build one of these gas bikes for longer distances.

@barriosbuilds7688 5 ай бұрын

Much rather these. Range is crazy good. Me and my buddy ride to the local auto parts and get a can of pre mix and we are good for hours. Ours are modified his tops out at 35 which is the one built in the video. Mine goes 41 with a balanced crank. There are so many fun modifications you can do to these, I’d much rather a motorized gas bike than an e bike. I say, just cruise don’t be gunning the thing because it’s not good for the motor to be full throttle for long periods of time. And if you’re cruising at about half throttle you’ll go for hours.

@JudeTheYoutubePoopersubscribe 5 ай бұрын

@@barriosbuilds7688 so far this bikes been through hell and back, 2000 miles since the summer which has resulted in the battery being sat on the charger for an awful long time. I've got what's considered a massive battery pack for an ebike and I still can only go 25 miles if going full throttle everywhere which I do because I love speed lol. I'm sure if I didn't have a death wish then I could get an easy 60 miles.

@TanveerOrAhmad 9 ай бұрын

What about speed?

@barriosbuilds7688 9 ай бұрын

As is, it would hit about 30-32 and after a few mods it hit 39. The motor is still going strong and is driven regularly. I think this is one of my favorite kits.

@TanveerOrAhmad 9 ай бұрын

@@barriosbuilds7688 thanks buddy

@throatpunch4789 7 ай бұрын

Very helpful video but you skipped some huge steps like the clutch cable hook-up and how to size and install the chain. Other than that i want to thank you very very much👏👏👏 good job brother! 👍

@barriosbuilds7688 7 ай бұрын

I’m actually did film the chain, the footage got corrupted🤦‍♂️ completely my fault tho, should have took the chain off and showed it.

@lsk-nf7um Жыл бұрын

Loctite would have been your friend.

@barriosbuilds7688 Жыл бұрын

I just used bolts that were too short, locktite would helped. But I put longer bolts and locktite, and it’s bullet proof now!

@DeadSharkOG Ай бұрын

A loooittttt of damn work im honestly afraid to do this. Wait would I need a license to ride this shit on the road? (Not like highways or anything)

@barriosbuilds7688 Ай бұрын

It’s so worth it. But as for me, I just ride in my small neighborhood and sometimes to the post office. If the slight chance you get pulled over, just say it’s under 50cc. Doubt they would pull the head off to prove that. But yeah just ride safe and respectful to others and you should be good.

@DeadSharkOG Ай бұрын

@@barriosbuilds7688 alright thanks man. I have a quick question, if I bought this kit and I wanted to upgrade my engine to a 4 stroke could I do that instead of buying a whole other kit?

@DeadSharkOG Ай бұрын

@@barriosbuilds7688 oh wait also can I go to a gas station to get gas for it? What type of gas does it take?

@barriosbuilds7688 Ай бұрын

@@DeadSharkOG you would want to just buy the four stroke. Because it uses a completely different mounting system.

@DeadSharkOG Ай бұрын

@@barriosbuilds7688 alright can I stop at a gas station for gas? Does it take a specific type of gas?

@jimsperlakis5634 7 ай бұрын

Somebody get creative. Make a jackshaft and then use the top sprocket on the right cluster. Or, rotate the cylinder head and reverse the engine direction but still use the cluster sprocket.

@barriosbuilds7688 7 ай бұрын

Look at my jack shaft videos… the jack shaft kit is a pile of junk though.

@_christienn._ 9 ай бұрын

50:1? Jeez man 😂 should be like 16-30:1 for break in

@barriosbuilds7688 9 ай бұрын

Nope, 40:1 from the beginning to the end. Running too much oil like that will never let the rings set, or just take forever to do so. And also build a ton of unnecessary carbon build up. 50:1 I agree is a tad bit much but not bad, according to some, people use 100:1 with synthetic racing oils. But I think 40:1 is perfect. Disregard that manual telling you to do 16:1 that’s nuts, it will smoke like a sun of a gun.

@dustinh4175 8 ай бұрын

Its called a slide my guy

@barriosbuilds7688 8 ай бұрын

Just couldn’t think of it on the spot

@user-ns9ue1vq5l 10 ай бұрын

That's not right. The nut should b secure to the back. N there is a giant space.

@jtkrpm1 Жыл бұрын

Your fuel filter is backwards

@barriosbuilds7688 Жыл бұрын

You know the funny part, I looked back on the footage. I even said to make sure it’s on the right way. And I still put it backwards 🤣

@Gramma_Is_pissed 9 ай бұрын

Hey Barrios Builds! I completed my build and it runs awesome!!! Your videos helped me so much, wanted to say thanks ❤️ -from a 56 year old grandma ( if I can do it, anybody can )

@ghostydubs6208 2 ай бұрын

You missed the how to manually move your engine on your own.. I’m stuck on my chain dawg

@barriosbuilds7688 2 ай бұрын

Multiple methods, 1 take of the cover with the clutch arm. And put the chain on 1-2 of the teeth and with a wrench turn the bolt which will spin the motor over and turn the gear. Thus making the chain go all the way around. 2 is take the cover off put the chain on 1-2 of the teeth, and with any tool, turn the gear over until the chain is around. Method 1 is my favorite and still what I use today.

@ghostydubs6208 2 ай бұрын

@@barriosbuilds7688 I do wanna ask about what if the chain rubs with the tire..

@barriosbuilds7688 2 ай бұрын

@@ghostydubs6208 the chain may touch the tire, but as long as it doesn’t rest on the tire you will be good. Also make sure the chain tensioner is not facing near the spokes. That’s an accident waiting to happen. Sometime you get lucky and you won’t need the chain tensioner. But for this build I wasn’t.

@ghostydubs6208 2 ай бұрын

@@barriosbuilds7688 I have been through 3 bikes now and I’ve gotta flip the tensioner but I also need to remove 3 chain links to make it snug with the bike, but if I didn’t remove the chain links would it still work the same or could that also be an issue

@barriosbuilds7688 2 ай бұрын

@@ghostydubs6208 if you don’t remove the extra links the chain will be really loose. That fork tensioner worked better with a stiffer chain. I would take out the extra links. Just make sure it isn’t too tight, because it will bind up.

@tobyelliott6783 Жыл бұрын

Starting first time

@jarrodcapone8617 Ай бұрын

Shows the entire install process, yet doesn’t show us how to start it

@barriosbuilds7688 Ай бұрын

We did at the end. Literally just like that. Hold the clutch, get going, and dump the clutch. Boom engine started.

@texasred5234 2 жыл бұрын

First

@mikelanoce2165 2 жыл бұрын

36 views..5 likes..you bypassed a few safety tips. Personally..I would not ride that new 1 on dirt roads till you rethink the safety tips and I'll just give you 1.. you should cut up a old tire and put a piece of it under your gas tank so it does not move.. Good luck

@texasred5234 2 жыл бұрын

Bike goes BRRRRR