Motorized Bike SAF Super Clutch (First Impressions)

Рет қаралды 24,520

2 жыл бұрын

With the S.A.F. your clutch will lock in like a bit bull! This clutch will fit into a 66/80cc, Yd-100, Phantom 85, and 110cc bottom end and is designed for high HP motors. From what little I know about it I have no doubt it will out perform anything I can throw at it... but I want to know if it's practical to use for daily performance driver.
At Time Of Recording:
$115 Super: dlh-performance.myshopify.com...
$80 Force: dlh-performance.myshopify.com...
$45 Budget: dlh-performance.myshopify.com...
Note: Other than basic hand tools, the only thing you need is a 1/4" 20 tap.
Basic install video: • S-A-F Super Clutch Ins...
In depth install video: • S.A.F. Super Clutch Se...
The in depth video has critical information that needs to be followed!
We upload motorized bike videos every week (sometimes more)!
FAQs:
Oil: 32:1, semi synthetic, random brands.
Gas: 87oct
Spark Plug: NGK B8HS (yd-100), NGK B6HS (pk80)
Parts: I buy mostly from Amazon.
Favorite Motor: Firestorm Zeda 80
Favorite Carburetor: NT Speed
Favorite Bike For A Motor: I don't have one yet.
To contact me directly find me on Discord "LA Hover#1036"
For motorized bike help, join the server / discord

Пікірлер: 137

@JMB676 2 жыл бұрын

I think that's funny, no matter what state your in or town your riding through 99% of all of us pedal when we pass a cop. I think it's just in our DNA. 😂

@LAHover 2 жыл бұрын

Hitting 40+mph, see a cope, start pedaling lol... If nothing else it might mess with their head just long enough to do the trick :P

@JMB676 2 жыл бұрын

@Steve Sweedy for sure, we all are.

@mikecyanide7492 28 күн бұрын

Lol guilty but I'm not gonna assume we're ALL felons

@kjohns1413 2 жыл бұрын

🤙 Turbo kicked in at 6:33 haha dang!

@Bradshaw02 2 жыл бұрын

i love your stuff bro i been here for 4 yrs now and i love seen you do this i have one and i love it i got one bc of you

@LAHover 2 жыл бұрын

Thank you that means allot :D

@HanzelFonferek 2 жыл бұрын

That thing was flying!

@bryduhbikeguy 2 жыл бұрын

I watched a couple DLH videos,and went to his sight.The prices he charges are worth not having to do all the work yourself,especially if you're in an area without a good hardware store.I have 1 here that I actually have bought the ball-bearing from,along with nuts,and bolts.I still won't be building a clutch though.Thanks LA,for the great info,and a nice ride.It's not been above freezing for a couple weeks.

@m.kasper7646 2 жыл бұрын

I'm using Darcy's clutches at dlh. 👌💪🏁👍

@samuelpiekarek925 2 жыл бұрын

I bought myself a cruiser bike, waiting for the motor to come in. This is awesome

@LAHover 2 жыл бұрын

Good luck on the build! There will be headaches, but when you get it going the feeling is so nice! :)

@vapethenasty6457 2 жыл бұрын

Exactly what I was waiting for thank you

@KB_Joys 2 жыл бұрын

Thing purrs like a kitten, or can scream like a banshee, lol

@kevinpuckett8223 2 жыл бұрын

I don't know what took me so long to find you site but I am glad I did. I'm still saving up money for my build. This is why I'm over 300 lbs and I don't just want it to ride I want it to run as close to 55 mph as I can get.With that being said please keep putting out if videos as you are with all the info and how to.

@darcyhemeon4309 2 жыл бұрын

I have a minarelli build that will get you thier on my youtube channel Complete Engine build , I also sell all the parts you need on my website it's in the descriptions of This video My channel is DLH Performance

@iszlaimatyasjeno1301 2 жыл бұрын

Sweeeet sweeet riding footage...thx for all the infos about the SAF clutch

@LAHover 2 жыл бұрын

And thank you :)

@HanzelFonferek 2 жыл бұрын

Awesome video bro!

@randyrush9856 2 жыл бұрын

Wow, amazing camera work 👏. I have no idea how you did that! Awesome

@JMB676 2 жыл бұрын

He has a 360 degree camera. It's suck right?

@tinbatman111 2 жыл бұрын

@@JMB676 But is it on a drone or what? It doesn't appear to be attached, but to be hovering alongside.

@HanzelFonferek 2 жыл бұрын

Here before 100 views!

@413MassDigger 2 жыл бұрын

Well seeing were about to get butt pounded by mother nature, with over a foot and a half of snow Here in Massachusetts,, I appreciate the vids man,, they will keep me entertained until i can get back riding in July lol

@LAHover 2 жыл бұрын

Ouch! I will do my best to keep you entertained through these trying times ;)

@Robert-hf5xr 2 жыл бұрын

Looks awesome

@LAHover 2 жыл бұрын

Thanks!

@tetojackson5040 Жыл бұрын

Cool man great video good job

@allbusiness8869 2 жыл бұрын

Someday bump your cylinder up to a Stage6 street race. They pull like crazy from 25 to 60mph.

@garylee7774 2 жыл бұрын

The bucking bar issue has been solved with the "nail type" one piece, T-bar.

@LAHover 2 жыл бұрын

Oh! Thanks for the feed back I'm going to look into this :)

@Boneze46 5 ай бұрын

Nice video 😮

@mozezcen-valley7555 2 жыл бұрын

Keep it up

@stlrob21 2 жыл бұрын

You may have to get smaller feet hahaha your foot still hits the carb great video

@LAHover 2 жыл бұрын

Out Of Stock... every time I check :P

@jayvlog9841 Жыл бұрын

Amazing 😮

@Technicallyfruit 2 жыл бұрын

Hey, how come you haven’t done a review of the bbr tuning kits? I’d like to see your review and opinions on them (particularly the 100cc). I’ve been considering buying one soon to start my early spring builds.

@spectrum4873 2 жыл бұрын

whats up la hover

@LAHover 2 жыл бұрын

Hello :)

@novavroomvroom2979 2 жыл бұрын

Will it work on a ZEDA FIRESTORM..???

@darcyhemeon4309 2 жыл бұрын

Yes it will work on any engine . I've streamlined my product so thier is something for everyone and every engine , the SAF is one of the best on the market

@LAHover 2 жыл бұрын

Yup :) that's what I have.

@E3motionz 10 ай бұрын

Hey mate. So I know you're one of the go to guys for info on motorised bikes. I have an 85 phantom I'm looking for some decent upgrades, an expansion chamber that can bolt straight on, a better and bigger carb and Reed also is there any magneto upgrades out there. Any help would b greatly appreciated as I would have no clue but really want to upgrade a few things

@EMNM22 2 жыл бұрын

16:30 Use a cut down drill bit shaft for the bucking bar.

@accidentalnick1982 9 ай бұрын

I'm looking to upgrade to a motorcycle clutch and cable as well, do you recommend anything specific that would translate over good for these motorized bike engines? I have 0 experience with actual motorcycles so I have no idea what they use vs our use case.

@22YZ450FX 2 жыл бұрын

Another awesome video! Be careful of the spokes I've had the torque rip the spokes out after a good run. This is why using a lower HP motor is important but the spoke thing should still be priority!

@LAHover 2 жыл бұрын

Thanks I'll keep an eye on them :)

@m.kasper7646 2 жыл бұрын

Ken Tyler, Why not just buy better wheels, 10gage spoked rims, sealed bearings and an overall better idea than "going down on horsepower". And they're Disc brake equipped too. 🏁👍✌️

@22YZ450FX 2 жыл бұрын

@@m.kasper7646 Yes I'd agree now such things are made but in 1984 when we used 10 speed bike with 50cc engine and minibike clutch the sprocket did weld to the bike hub but no such 3rd party made these in 1984.. Thin ga spoke isn't made for motorized drive was all I was saying. I haven't had spokes come loose on the 22 yz450fx and I try to break em out..

@m.kasper7646 2 жыл бұрын

@@22YZ450FX in 71 had a Mac101 on a old tanker beach cruiser that was insane. Yes the wheel thing was a challenge then too for a minute. 😆

@22YZ450FX 2 жыл бұрын

@@m.kasper7646 Nice! Tho going 50+ on these types of bike is crazy and not very stable with the best equipment/conditions.

@joshreed8053 2 жыл бұрын

Any chances you do a chopper build bike id love to see that from you with your opinions on it. A Jessie james or a sting ray chopper bike

@sanbyakuman 2 жыл бұрын

How safe is this with the exposed rotating clutch? I'd be worried about getting my pants leg caught in it.

@darcyhemeon4309 2 жыл бұрын

If a person is worried about this a simple pant leg strap you could use , it's about as likely as catching your pants in the chain .. this is a custom option like on custom motorbikes with a open belt drive

@LAHover 2 жыл бұрын

I guess we will find out :P I'm not sure I did not give it much thought. Would want to keep an eye on shoe laces.

@MezzysAutomotive 2 жыл бұрын

(Late) what can fix slipping of the clutch when starting “ex: popping clutch while pedaling to start it”.

@nigga8319 2 жыл бұрын

Why you don t put high compreesion head on your bikes

@LAHover 2 жыл бұрын

I have one on the way :)

@jamesgnarkill3112 2 жыл бұрын

Awesome content!!.. will definitely be checking into this ..but I'm hoping that the beefy spring that came with mine will be enough 😂😂....any luck with your idle??...

@LAHover 2 жыл бұрын

I hear good things bout them, they can handle most builds. I'm not sure about the idle yet. I did make a few changes that might help, but the clutch was dragging so I could not tell.

@kestonramdeo8419 Жыл бұрын

why do you take off the main spring?

@JustmePeter12 2 жыл бұрын

Hi can you do something about the lights using the one on the motor already

@cls_alex13 2 жыл бұрын

Yo where did you get that motor mount from?

@sastrotri 2 жыл бұрын

Amazing.. what is the maximum speed Bro..?

@HanzelFonferek 2 жыл бұрын

This was clutch! Lol

@LAHover 2 жыл бұрын

pun lol :)

@rodriguezfranco3839 Жыл бұрын

Brother , the minarelli cylinder has the same stud pattern as a 48cc engine or a 80cc engine ? Cause I am looking to get a jog top end for my 48cc

@LAHover Жыл бұрын

the 66/80cc kits. good luck!

@SnowMizt 2 жыл бұрын

I would’ve kept my motorized bike but if I was going on a ride for 10 minutes or more my spark plug was getting really hot and started to melt the boot. Any ways to work around this and make it not heat up so quickly?

@ambiguoustvreference835 2 жыл бұрын

1, get a much cooler plug 2, tune your engine a bit richer

@joneserupinsmoke9161 2 жыл бұрын

I really like these kits I like the complicity of them cool as hell but it's so hard to find a good plug and play with enough power to get u out of trouble with someone driving stupidly and dnt look out .I am waiting on new rings for this phantom hopefully this will be the last time I have to send this thing back it killed most of summer waiting on it all .my kids are tight lol

@joeeastman Жыл бұрын

My mindset is always assume that everyone driving on the roads just got their license therefore always on high alert and aware of everything going on around me

@joeeastman Жыл бұрын

My mindset is always assume that everyone driving on the roads just got their license therefore always on high alert and aware of everything going on around me

@joehfirebrimstone9727 2 жыл бұрын

How do you have a disk brake and the sprocket. How do you make that work!?? It's nice info on the clutch

@LAHover 2 жыл бұрын

This frame "F-Zero" and the "Zeda Dawn V2" both come set up like that out of the box. They use a large rear rotor, smaller rear sprocket, and spacers to make it work. You can do it your self, but it's too much of a hassle for me to bother with. Kevin, from kzfaq.info did his own, I think he has some videos about it.

@lowrygriffithbubba4145 2 жыл бұрын

Decent ride!!!!

@lowrygriffithbubba4145 2 жыл бұрын

How many CC's one block is by Don as well?

@lowrygriffithbubba4145 2 жыл бұрын

You past a bike going the other way.

@lowrygriffithbubba4145 2 жыл бұрын

So bikes with gears how come I put my sprocket and my gear is one. On the motor no other gears to wind out.

@jekekefe5923 2 жыл бұрын

So if I put it on a low gear i can go up steep hills ? Can you pedal with the engine? What is the range of these bikes ?

@joeeastman Жыл бұрын

There’s 2 chains, the original bike chain and the motor chain. Your gears only affect the pedal chain (original) chain. Motor drive chain is only one speed. You can still pedal if going slow enough. Range is excellent if you’re just cruising the streets

@Urugami45 2 жыл бұрын

OK, super strong clutch, no slipping, got it. What I want to see a vid about is that side camera you use. What's the mount? How do you control it? And how do you take the support bar out of the picture? THAT's what inquiring minds want to know. :)

@JMB676 2 жыл бұрын

It's kinda like a selfie stick, I believe he explained it in a previous video. It basically records on the front camera at like a 190 degrees and on the back camera at like a 190 degrees and then in edit it makes the stick disappear because it's recording that extra ten degrees both ways. The simpler explanation is, he knows witch craft. It's a super sick way to be able to record isn't it.

@LAHover 2 жыл бұрын

Spot on, thanks John

@Urugami45 2 жыл бұрын

Thanks for the explanation; I haven't seen the other vid you mentioned. And yeah, it's slick.

@JMB676 2 жыл бұрын

@@LAHover yeah man I love that camera it's super sick

@damnthiccassboye7138 2 жыл бұрын

How is the g2 idle doing??

@LAHover 2 жыл бұрын

I'm not sure about the idle yet. I did make a few changes that might help, but the clutch was dragging so I could not tell.

@matthewfredrickmfkrz1934 8 ай бұрын

Sick i got that flypig pipe on the spree

@coothethird 2 жыл бұрын

Which bicycle are you using for this build? Would you recommend it?

@LAHover 2 жыл бұрын

This is the F-Zero, The CDH frame it is built on is nice and solid, but the rest of the part are nothing specials... Knowing what I know now, I would build onto this frame with better parts. Even if it means using a cheap Cranbrook as my daily while I slowly build something better in the background.

@coothethird 2 жыл бұрын

@@LAHover Thanks for the advice! I've been riding a 1990's Huffy Causeway with a modified YD100. Would like for the next bike to be a little more speed worthy and with the built in tank.

@mjsmjs7905 2 жыл бұрын

Yep, got pulled over on the Phatmoto doing about 35mph. Got searched got padded down, ran my driver's license. Two of them, they wanted to give me some but they didn't know what, so they let me go. In NH they could have given me $100 Citation for unregistered vehicle, but I wasn't going to tell them that.

@LAHover 2 жыл бұрын

Bet they were looking for illegal goods... these bikes sometimes get a bad wrap.

@joeeastman Жыл бұрын

Check your local law about “moped” specifications and see what is considered or classified as a “moped” ie, seat height, engine size ( usually 50cc and below but they can’t really prove if you’re running 66cc or higher), mirrors, lights and signals etc. I used to get shit all the time from the cops but they could never ticket me cause they were clueless on what I was actually riding. I eventually wrote an email to the chief of police explaining that my bike met the specs of a moped and to my amazement he wrote back telling me I was in the clear then and if I were to get stopped again just to show the email to the officer….no more problems 💪🏼

@nurzrachit7133 5 ай бұрын

That is why I put a 49cc sticker on my motor. Legally I don't have to register in my state . Plus I don't go crazy in heavy traffic/population areas. I have noticed the police checking me out on a few occasions and they seem to want to do something about it, but then they just turn the head and act like they didn't notice me. It's actually a pretty big waste of their time to try to make something happen that gets them in my sheet. I want to put a 212cc on my Phatmoto, but it is too obvious when it's sitting up there looking All huge😂. I'm in the process of building a Felt Faker 2 stroke minerelli type skreet racer and I might do the 212 once I get that rolling completely. There's a lot of stuff I could do to the 79cc of the Phatty while it is out too, Port/polish/grind valve seats. Carb jets for max performance, exhaust mods, etc etc etc and I have a strong desire to try that stuff too. I've heard of people WHO DOUBLED their HP with mild energy applied to the build. Possibly get 8HP With some work? With that light an engine, it's a compelling option compared to the heavy 212.

@HanzelFonferek 2 жыл бұрын

What drone do you use to record???

@novavroomvroom2979 2 жыл бұрын

I think it's a 360° camera on a pole

@jorelldye4346 2 жыл бұрын

Yes it's one of those self-driving, auto-following drones 😉

@HanzelFonferek 2 жыл бұрын

@@jorelldye4346 that's what I thought... I am just wondering what brand

@LAHover 2 жыл бұрын

360 Camera on a selfie stick :)

@HanzelFonferek 2 жыл бұрын

@@LAHover okay! Thanks LA Hover

@juststartsomewhere9089 2 жыл бұрын

How does he get that dope shot from behind his bike while riding!? Can anyone tell me it such a choice angle.

@LAHover 2 жыл бұрын

Thanks! It's a 360 camera. This one is the "One x 2" the Max from GoPro is nice too. Software hides the selfie stick automatically.

@LAHover 2 жыл бұрын

FYI, it's audio sucks. I use a chest mount camera for the audio.

@juststartsomewhere9089 2 жыл бұрын

Sweet thanks! I want to start a channel on my builds i litterally only just put a 30 second preview of my daily bike but ive got everything for a new build thatd be more of a show bike and its gonna be sorta cafe racer meets british enfield kinda mixed style. Anyways i bought a akaso brave 4 its what my preview was shot on. I dont hate it but given my budget after your brave 7 vid im gonna get that one but thanks because this gives me a reference point and camera goal lol as im not too tech savy thanks for the response i love the content dude youve been the first channel i reffer to for years

@jawauncobb9300 2 жыл бұрын

Sir how much was that total bike bill I will keep in touch to see how much cause I would like another one build just like that please let me know how much I’d you do so thanks in advance

@jawauncobb9300 Жыл бұрын

So sir I can’t know how much that build is or where can I find this SAF SUPER CLUTCH PLEASE LET ME KNOW THANK YOU

@LAHover Жыл бұрын

This bike was built slowly for over a year~. I estimate it came out to be about $1,500. As for the clutch, it's linked in the video description, and the website is shown in the video.

@allenmorgan8206 2 жыл бұрын

I PURCHASED A SUPER CLUTCH YESTERDAY WAITING FOR SHIPPING INFO (HOPE ITS NOT A SCAM).

@JMB676 2 жыл бұрын

Definitely a cool ass clutch and never having one myself I have always thought they are more for high end or big power builds and just never thought a basic motor really needs one. However if you base your decision on cool factor it's a no brainer. I gotta say I have been wanting to make my own for a while now, just cause it's cool looking.

@LAHover 2 жыл бұрын

I know you like to DIY, This will probably do allot to beef up a stock clutch. I'm sure some of the other guys sell them too, this is just where I know to find them. dlh-performance.myshopify.com/products/saf-budget-clutch?pr_prod_strat=collection_fallback&pr_rec_pid=7086756724913&pr_ref_pid=7086769733809&pr_seq=uniform

@ifyourgonnabreakitdoitrigh8756 2 жыл бұрын

I can’t for the life of me get the rear disc to stop rubbing on my back rim on my gas tank frame I did every adjustment possible

@LAHover 2 жыл бұрын

Do you know what gas frame it is? got a link? On the F-zero I did not run into that issue.

@ifyourgonnabreakitdoitrigh8756 2 жыл бұрын

@@LAHover mines the 2.4 liter gas tank frame from bbr it’s red

@danielrodriguez1665 Жыл бұрын

So wat is this about

@redneckinventions8733 2 жыл бұрын

If your reeds don't seat correctly then get reed springs

@LAHover 2 жыл бұрын

Thanks for he suggestion :)

@k.c.7394 2 жыл бұрын

It needs a VZ21 Turbo Small Engine Turbocharger! $100 Might be fun

@stephenfhauk 2 жыл бұрын

Good video, But I have no need of some clutch that costs as much as my whole engine did. To each their own I don't see how it does much of anything accept let in dirt and debrief every time you use the clutch. $115 for a clutch, I don't think so! Hell I only paid $140 for the entire engine kit. Cool look but that's not what I built mine for.

@darcyhemeon4309 2 жыл бұрын

If you owned a minarelli probably need one or hi hp engine , your in a different class with all dew respect ! if your running a stock engine .there is no need for the SAF Super Clutch, I have several the top is 115 to my budget SAF Ata very reasonable price 45.00 , But as LA Hover states in video a stock engine just would not require this upgrade

@LAHover 2 жыл бұрын

Thanks, many of the parts in my videos are not for every build :)

@cesarpagan4640 Жыл бұрын

Worst comes to worst we will have to push start it

@joneserupinsmoke9161 2 жыл бұрын

To hove bro I set the new 3rd phantom on a build took plug out walked it to door for 1st test ride and the ring snagged and broke lol dude didn't even get to try to start it .man bro I really want to jist get the after market or what ever u want to call it but the new piston but I dnt want to pay more cash and even more I dnt want to void the warranty on it 😡 I'm so over this phantom engine.ans I fell bad for the dude who made it and how these companies are destroying his ish

@LAHover 2 жыл бұрын

Oh Mannnn... That's gut wrenching lol. I think your motor is cursed!

@paullehman8652 2 жыл бұрын

Where’s that burger

@vampire7878 2 жыл бұрын

4:14 Anomaly 0-o

@JMB676 2 жыл бұрын

🤣 He adjusted the cameras pole.

@LAHover 2 жыл бұрын

Adjusting my UFO ;)

@christiansanchez1486 2 жыл бұрын

DLH clutches are crazy overpriced like holy Moses heard they grip the pads like no tomorrow Edit: also heads up sounds like your small bevel gear is gonna shoot out soon my Zelda 80 with a DIO upgrade start making a squeaking sound around the clutch area and thought I was slipping and on the way home the small gear ripped itself to smitherings I was glad it blew out close to home otherwise I’d have a long heavy and painfully hilly ride home

@darcyhemeon4309 2 жыл бұрын

I have the CNC SAF Super Clutch priced at 115.00 The new CNC SAF FORCE priced at 80.00 SAF Budget Clutch 45.00 Thier is a price range for all levels of builds

@LAHover 2 жыл бұрын

Thanks for the heads up It's good, you might be hearing the clutch dragging when I pull it in because it needed to be re-adjusted. His Force clutch comes in at $80 with the same bite and a nice look, it just does not have the custom face plates witch are what takes more time to make. And I predict the $45 budget clutch will have around 70-80% the performance of the super too, it just uses the stock presser plate. Performance and looks for every price range :)