Motorized Bicycle Kit +nitrous

Рет қаралды 70,434

ZoominAlways

25 күн бұрын

this was a fun and interesting experience, never rode one of these.
Comment Any Ideas Below
Snapchat-imzoominnn

Пікірлер: 142

@Gusbuhler288 23 күн бұрын

When’s the sprocket vid?

@Justgonnasendit88 22 күн бұрын

Real

@Cow_Pie 22 күн бұрын

Soon😊

@tejdz1337 20 күн бұрын

you need that "baffle" for the exhaust to function as an expansion chamber. without it you loose alot of power

@gabrielpinhao6459 11 күн бұрын

Those are very poorly dimensioned, taking them out actually helps.

@Joshtheweatherman 7 күн бұрын

On a 4-stroke, it's true. But on most 2-strokes, having no baffle will actually gain more power. Most 2-stroke race bikes don't even come with baffles from the factory. So an aftermarket exhaust is kinda pointless.

@Beastcore59 22 күн бұрын

His neighbors have to hate him with how loud he is lol

@krossmellow9434 21 күн бұрын

I have one of these I built and you keep the basic bike chain on to be able to pedal start it! That's the whole point!

@fadedbreads 23 сағат бұрын

wouldnt the engine spin the pedals?

@wisecampmotorcycles8258 23 күн бұрын

Awesome bro, but hurry up with the sprocket collection video 😂 And a bigger NOS bottle.

@theLyzhendricks 20 күн бұрын

Glad u built one of these thier super fun I got 2

@Mr_Flybacker 2 күн бұрын

A little history. This engine was created after WWII in Ukraine (then part of the USSR), after which it was produced in Kharkov and later in Leningrad. In the 2000s, the Chinese copied it, changed the volume and shape of the cylinder, removed the spool intake, and installed electronic ignition. But the shape of the body, its dimensions, clutch, and drive sprocket remained from the original from the 50s, made in the USSR. Live with it.

@blackswordsman-cy5kb 13 күн бұрын

It's a 2-stroke, you have to put the mixture in the petrol

@Zane.Wellnitz 22 күн бұрын

You still need the peddle side chain to get started. Think moped... Also those wheels are going to make you wreck at speed. When you start feeling the heat on your arse pull over. It is your rear axle heating up and will snap and High side you. Speaking from experience 🤙🏻 🚴🏻‍♂️💨✨

@JB_Lego 21 күн бұрын

Damn my bearings are just a little worn from going 50+km/h

@Zane.Wellnitz 21 күн бұрын

@@JB_Lego I was going 60mph and slowed down to 45 when I was feeling the heat. That's when my axle snapped and half of it fell out of the bike. The wheel started violently wobbling and I took it into the grass and that is when the wheel flopped to the right and steered me to the left which high sided me onto my right side. Slingshotted me. I bought a set of Gemini's to stop that issue from ever happening again.🤙🏻 🚴🏻💨✨ ✨🇺🇲✨✝️🙏🏻✝️✨🇺🇲✨

@TimpBizkit 6 күн бұрын

@@Zane.Wellnitz what kind of junkyard bicycles are you riding?

@Zane.Wellnitz 6 күн бұрын

@@TimpBizkit a board track racer and a 125cc dirt bike. What is your issue?

@TimpBizkit 6 күн бұрын

@@Zane.Wellnitz all my bicycles have been stable into the 40s. I haven't found any safe downhill to get them any faster. A Scott Voltage MX3, Giant Yukon, Saracen Helix and some Viking Race. The bearing did eventually go in the Scott but I rode it a lot - a few thousand miles with a bafang kit - and the replacement wheel was good. A bit blustery at 47 mph due to the wind but no speed wobbles or mechanical issues. Also is the heat of a bad bearing even noticeable above the engine or simply using a back brake? Potholes however. Killed a rim hitting one at 35 mph. Nearly threw me off the bike! Thankfully on the Scott with tough beater rims with 36 spokes and not the dainty Saracen road bike.

@sasquatch_886 7 күн бұрын

Motorized bikes are the best dude. So cheap, highly customizable, tons of performance, awesome hobby. An actual solid mode of transportation too. It's actually pretty straightforward, just watch some in depth videos on how to do it. Just get a large frame bike if you can, not to hate but this bike was janky especially without being able to pedal 😂

@Arzzzz-ww1ry 3 күн бұрын

But illegal in my country 😢

@ogcosmin4071 5 күн бұрын

I beg you to buy another 2 engines and mount all three of them on a single bike. You will need welding, but I am sure that is no issue for you. You can mount them over or behind the rear wheel, connect all of the engines to a new axle with chains and then connect the new axle to the wheel using a single chain.

@TimpBizkit 6 күн бұрын

Did you make the fuel mix any richer for the NOS? More oxygen = more fuel to go with it. Do you have any two stroke oil in there, cause if you don't it will kill the engine. Also, the left brake is the front in America? Weird.

@shanegrundy8553 Күн бұрын

Hi im from Australia 🇦🇺 where do u buy the nos bottle holder from thats on handle bar when nos button from ?

@wisecampmotorcycles8258 23 күн бұрын

Hey camera man, you blew it ! You missed the crash !!!

@brwed 22 күн бұрын

what do you mean you wont be able to pedal thats like most of the point of a motorized bicycle you start it by pedaling and releasing the clutch...

@teeco5952 19 күн бұрын

I just run start mine I got tired of adjusting 2 chsins

@kusinx800 13 күн бұрын

@@teeco5952so you just took the stock chain off?

@DraycenScherer 22 күн бұрын

Why did you take the chain off the bicycle chain?

@LenkaLietuvis 22 күн бұрын

Why don't you start it which pedals

@BeamerTheFox 22 күн бұрын

VERiNICE ! GRREAT SUCCESS !

@Goose_13 23 күн бұрын

When is the sprocket video

@forrift7845 23 күн бұрын

They don't fit lol

@zermecment5781 23 күн бұрын

@@forrift7845 lol

@cruzwilson-eo9gy 23 күн бұрын

i have a motorised and it goes 90 its aboustly crazy love ur videos btw

@DogsaladSalad 19 күн бұрын

Mine goe 105

@gazza70cr 8 күн бұрын

Great videos. you deserve more views.

@2strokezoomies 21 күн бұрын

@zoominalways hope you mixed oil in petrol or it will sieze

@cskalle1213 16 күн бұрын

16:00 we have a "fuel issue"

@2strokinbikes 2 күн бұрын

It has to be broken in before using nitrous and u need to b at top end speed before using nitrous so the piston doesn't explode and the nitrous kit needs to be attached to the intake for a better performance gain

@Littleevil9975 15 күн бұрын

Great video bro thanks for sharing it

@fancy_banna 13 күн бұрын

ngl i forgot abt the nos till he reminded me 9:20

@Stinky_Couch_Pickle 8 күн бұрын

holy crap thats a long intake runner! Im still watching, lets find out!

@TheOfcCdog 23 күн бұрын

A poor guys surron

@teezo6574 22 күн бұрын

man u own a nitro rc car shut up

@onskuponsku_11eo21 22 күн бұрын

bruh

@2strokezoomies 21 күн бұрын

These can be quite expensive with all the upgrades you can do I’ve got one with £250 ish into performance parts

@udpro1 23 күн бұрын

You should get rid of the old sprockets front and rear, and then get rid of them peddles and weld some pegs cause there isnt really a point in pedals. Also I am getting a 50cc 2 stroke kit for a small supercycle. I have got rid of the front sprocket and am leaving the rear. It is almost done 😄

@Stinky_Couch_Pickle 8 күн бұрын

true, thats an option! I think the pedals are for keeping the bike as a pedal-assist catagory, obviously the speed ruins that tho!

@worscohli 13 күн бұрын

No link to nitros tank?

@projectrubberband 21 күн бұрын

needing an exhaust to be on for a 2 stroke motor debunked - zoomin always 2024

@Red_Knight_66 21 күн бұрын

I have 2 of these! They are fun. Except when I installed the motor I kept the entire bike intact

@Bdggd 23 күн бұрын

It’s technically snorkel now😂

@leonardarola 12 күн бұрын

No. Nope. Nos substitute not a great port work, a well dialed carb etc... kid.

@Dirt-Tomfoolery 22 күн бұрын

That bicycle kit sounds just like my 74 ke100

@CarlCarl-rt6of 23 күн бұрын

the golf cart build please????

@Sam-zc3oe 23 күн бұрын

They did it already I think

@sumguy1174 18 күн бұрын

Where can I get the nitrous kit

@trentbikes 23 күн бұрын

Time to do a lot of upgrades and mods to the engine.

@alanspring8462 12 күн бұрын

Happy to subscribe to you guys.

@tylerhale1696 18 күн бұрын

I always replace the studs with bolts😅💯

@Motorizedstuff 23 күн бұрын

Why would you take all the gears off the back madness

@Stinky_Couch_Pickle 8 күн бұрын

I dont think you would ned the gears since its now petrol powered. I dont know what kind of derailleur would be needed for all that torque

@Motorizedstuff 8 күн бұрын

@Stinky_Couch_Pickle no I mean pedal with it like an e bike

@Stinky_Couch_Pickle 8 күн бұрын

@@Motorizedstuff yeah, I realized what you meant afterward as I looked closer at his setup.

@Motorizedstuff 8 күн бұрын

@Stinky_Couch_Pickle they are acctually very power full when you take the stinger out the exhaust and take the sponge out the air filter drill some holes in the air box and 2 holes at the end of the exhaust and pedal with the bike i swear you can get up some really big hills I think they are deacent to be honest

@Stinky_Couch_Pickle 8 күн бұрын

@@Motorizedstuff insane bro!

@tjr1071 20 күн бұрын

I got the exact same kitten that's awesome

@timevett692 6 күн бұрын

That engine is screwed. You guys need to break those motors in! I literally just bought a pexmor 100cc a month ago and the break in is vital!! I’ve since then moded everything you can and ported and polished mine and changed sprockets. Mine does 60+ mph now.

@tiaanmarais8720 18 күн бұрын

When doing burnout throttle and dump the clutch

@enry_lebaron 15 сағат бұрын

dat carb intake stole all yor power

@Jackson-zx7ir 9 күн бұрын

You guys are basically making a dirtbike but with nitro lol

@suli_jo 22 күн бұрын

Sprocket vid?

@DailyDoseOfEthernet 7 күн бұрын

Link for kit?

@papi24x 23 күн бұрын

finna try this

@ThePomskyCuber 7 күн бұрын

Yo, can you like link this kit?

@teezo6574 22 күн бұрын

yeah man i give it a B+

@ov4h 23 күн бұрын

Big zooming!

@koltenmarcum 22 күн бұрын

Why take the gears off, that's what keeps it a bicycle, my dad built two and never did anything to the gears.

@stashered 23 күн бұрын

15:48 😂😂😂😂😂

@Kidztv69 5 күн бұрын

bro was huffing gas

@cskalle1213 16 күн бұрын

16:00 we have a "fuel issue" ofc it looks like there aint no 2stroke oil in the gas its clear as day!!! xD RIP piston&cylinder

@High.Gear.Garage 21 күн бұрын

Insane

@CJTJBIshorts 22 күн бұрын

W vid

@Jamin.Tortuga 21 күн бұрын

Gota film dat shit lmao over the bars

@cheesecake9336 22 күн бұрын

Bruh I got the exact same bike. So only a 85 cc one would fit not 100cc bruh that’s what I tried the 100cc to big

@Braapboys6969 23 күн бұрын

Goes a lot faster if u cut the muffler off

@MarcusLong-Plays 7 күн бұрын

remove the plastic cap that you used to put the nos in (the bike wil have more torque)

@Skindianabones415 10 күн бұрын

It takes 40:1 oil n gas

@jacobbennett2994 23 күн бұрын

Bro thats a pocket bottle 😂😂😂

@BeamerTheFox 22 күн бұрын

sneaky pete kit lol

@al3k 20 сағат бұрын

Must be a hard life having a gold helmet welded to your skull.. :(

@ricksanchez8295 6 күн бұрын

no bardzo dobra robota 👌

@onskuponsku_11eo21 22 күн бұрын

SPROCKET VID!!!!!

@Micasky9285 23 күн бұрын

I love it

@QuinnCsVideos 22 күн бұрын

NOOOOOO NITRO ON THE ROCK CREEK IS *W I L D*

@efraimdentgames563 18 күн бұрын

Now record video tutorial how to put in nitro !!!

@2strokezoomies 21 күн бұрын

HELL YEAHHHHH

@grahamwhittle6817 Күн бұрын

Talk about a boost

@Pigrr 22 күн бұрын

Zooooooooooooooooooooooooooommmm

@Official_Myna 9 күн бұрын

STRAIGHT PIPE IT!!!!!!!!!!!!!!!!!

@lenniesabas2202 9 күн бұрын

Bro this kit is so simple to use and operate how tf you messed it up that much, brain is missing

@kaiyofox 16 күн бұрын

add a shift kit

@JohnMuri-zo2pw 2 күн бұрын

I have hybrid bicycle motorized+electric

@Bobs-yer-uncle 21 күн бұрын

How not to install a motorized bike kit 😅

@JGGarage-js7bz 9 күн бұрын

Remove the muffler cap!

@Willy38134 21 күн бұрын

ankle burner 500

@xa5hhayezx241 18 күн бұрын

Y’all gotta stop pestering my boys about the sprocket video I I think maybe he shouldn’t have shown the sprockets on KZfaq before making a video about them but

@papi24x 23 күн бұрын

450 swap it now

@Dirt-Tomfoolery 22 күн бұрын

@user-ni7tg5fg9k 19 күн бұрын

switch gears😂

@salemmejalli905 23 күн бұрын

Yoo

@gofrettogofretto2747 23 күн бұрын

More oil

@wisecampmotorcycles8258 23 күн бұрын

Hey bro, try a expansion chamber type exhaust on it, it'll give you a power band.

@Y.A.A.E.G._Games Күн бұрын

Just attach a go pro to helmet.....

@louiseaguallo4213 9 күн бұрын

the prob is... is super slow😢 and to expensive $200

@mikerichardson557 7 күн бұрын

you 2 dont need nitrous that's for sure

@literalbozo-ti8md 8 күн бұрын

Dude shut up and let your friend build it 💀

@ankyx_ 22 күн бұрын

Take the entire exhaust off

@reidmackay9703 22 күн бұрын

Buddy of mine had one and we had no zaust on it and it sounded like ass but was noisy

@joeyweston9001 5 күн бұрын

Walmart fall apart

@evanmeneilley3228 22 күн бұрын

Sprocket video or else we are un subbin

@Tezz42 8 күн бұрын

Dont break my bike youll pop a tyre are you saying your friends fat 🤭

@Nashdpbdrift 23 күн бұрын

Face reveal😊

@wisecampmotorcycles8258 23 күн бұрын

No way dude, that's just how it is. Maybe he is disfigured from an accident or something, and doesn't want to show anything, except the crazy shit he does 😅

@gofrettogofretto2747 23 күн бұрын

Bıke 90 $! wtf so freaky cheap

@suli_jo 22 күн бұрын

No it isnt

@wildcat207 23 күн бұрын

First

@wisecampmotorcycles8258 23 күн бұрын

Big deal

@Sam-zc3oe 23 күн бұрын

Yeah it is a big deal

@slothzombi307 9 күн бұрын

Just put in a random amount of gas and oil. Then zip around at full throttle. Then attach Nitrous and zip about, all before a good break-in period. I guarantee this bike will be toast in a short time.🚲