Motorized Retractable Metal Hobby Train Table Part Three

No video

Motorized Retractable Metal Hobby Train Table Part Three | JIMBO'S GARAGE

Рет қаралды 41,585

4 жыл бұрын

#JimbosGarage #Welding #MetalFabrication This is the last of the three part video I did building this retractable metal hobby train table. This was a very unique build that took some time but in the end turned out great. We were not working off of any plans so we learned as we went. The client was very happy.
Subscribe to Jimbos Garage: bit.ly/JimbosGa...
HTP: www.USAweld.com
Black Stallion Welding: amzn.to/2XJHBJV
MERCER INDUSTRIES: amzn.to/2UzqdWw
Metal Supermarkets: www.metalsuper...
Grinding wheels I use: amzn.to/2PPdEpo
Buy a Jimbo's Garage Welder holders here: www.jimbosgara...
Camera I use: amzn.to/2CfEFOi
Follow Jimbo:
Facebook: / theofficialjimbosgarage
Twitter: / jimbosgarage
Instagram: / jimbosgarage
About Jimbo's Garage:
Jimbo's Garage is a channel to watch real metal, steel, welding and wood projects. #howtoweld #metalgate #bigmetalgate #htpwelders #weldtables #blackstallion #kingmetals #metalhinges

Пікірлер: 87

@aleksandarhalachev5378 4 жыл бұрын

Congrats from Bulgaria for 200k subscribers. Keep up the good work.

@chadneesmith4077 4 жыл бұрын

Turned out very Nice! Another fine build.

@RHEC1776 4 жыл бұрын

That is absolutely badass.

@jasonbiggsimmsimmons2664 4 жыл бұрын

Great work!!!

@NelsonReyesJr 3 жыл бұрын

That would make a great work table as well!

@fwflyer78 4 жыл бұрын

Nice work Jimbo!

@boneal4942 4 жыл бұрын

Awesome project!

@dmwi1549 2 жыл бұрын

Nice work! It would be interesting to see the finished layout and how it fits in the rafters.

@shawsoInc 4 жыл бұрын

Anybody who criticises the size should pay more attention as multiple times Jim makes it clear this is the dimensions the client wanted, his job is to do what’s been asked for. Jealously is a terrible thing. Great work Jim as always.

@sawind2058 4 жыл бұрын

This is craftsmanship 🔥

@jlinkhart 4 жыл бұрын

Slick move with the light that comes on when the table is raised all the way!

@mburton5365 4 жыл бұрын

Awesome mate, well done !

@amycyclenut 4 жыл бұрын

Nice job Jimbo!

@tonyozimek2116 4 жыл бұрын

Pretty Cool!

@joestenzel142 4 жыл бұрын

Great build

@rizwanabdulas 4 жыл бұрын

Great idea

@willford8475 4 жыл бұрын

Pretty cool!

@paulmorrey733 4 жыл бұрын

Thanks

@120Livi 4 жыл бұрын

wow, that's brilliant. the lifting rig is a great idea

@RonMarshallrone 4 жыл бұрын

That is so awesome. I watched from part 1 to now. Very nice job man.

@droy333 4 жыл бұрын

Nice work Jimbo! Fancy stuff!

@boondocker71 4 жыл бұрын

Nice idea, you did a great job with it Jimbo!

@Malandrin 4 жыл бұрын

neat job! finally I understand the dsign, the table is lowered and raised by a frame that can then be hided under the roof when the table is in use, clever design

@phillypauly 4 жыл бұрын

pretty neat concept and like the mods you did

@beozzie690 4 жыл бұрын

What’s so great about your vids is that you give the welder speeds and settings... totally get what you do and helps me with my practice

@francis-paris1629 4 жыл бұрын

VERY GOOD VIDEO 🇱🇷 👍 My name Francis. ( Paris France 🇫🇷)

@Studio23Media 4 жыл бұрын

I just watched Parts 1 and 2 yesterday and was disappointed I was going to have to wait for part 3! I'd love to see a photo of the finished install if possible! Edit: I should've watched the whole thing before commenting. This is an awesome setup!

@MatHelm 3 жыл бұрын

Add a raised hard dust cover lid on the crane frame and it'd be near perfect.

@davidpalmer9029 4 жыл бұрын

Nice build! Please follow up when it has some trains on it!

@anthonyvega1959 4 жыл бұрын

Kick ass work as always

@vladzett 4 жыл бұрын

awesome work!!

@americanmaker8608 3 жыл бұрын

You combined two of my favorite hobbies together. Metal fab and model railroading. I have alway thought about doing this with my layout. Awesome project Jimbo.

@Dzackman 4 жыл бұрын

nice job

@k2line706 4 жыл бұрын

Awesome! Nice to see something other than a gate. Gave me some ideas for what I can do around my place.

@billmckillip1561 4 жыл бұрын

That is a very cool project. I have seen one done in plywood with a manual pulley system - yours is long march beyond that!

@davidbroad4834 4 жыл бұрын

Good job. I have that lift, glad to see beaf up up the weak spot on the crank.

@brambruijnzeel 4 жыл бұрын

Thans was a perfect project Jim! Lovend it all the way. Stay safe, and warm greetings from the Netherlands, Bram.

@BrandonBurns1985 4 жыл бұрын

Badass

@robertoturco420 4 жыл бұрын

W O W !

@jodyrolandconstruction6577 4 жыл бұрын

That turned out pretty nice.

@280zone 4 жыл бұрын

That is pretty slick! Who are these people that say that table is too big? As someone that is six and a half feet tall, I would love that size table! The only thing I would change is the outer ring to inner ring attachment configuration, it seems it might be a bit difficult to stop the motor exactly where you need it to install the pins. Otherwise it looks like a great idea.

@SandBoxJohn 4 жыл бұрын

I waited for you to finish the whole series before describing a similar setup that was done by fellow model railroader for his layout. He suspended his 12' X 8" L shaped railroad using 3 cables from the trusses in the 2 car garage. The 3 cables went through 3 pulleys above the bottom cord of the trusses and were combined into 1, then through a 4th pulley then down the a winch mounted waist high on the wall. 3 cables were attached to 2 X 6 joists under the L shaped bench work. A block was attached to the cable between 4th pulley and the winch to hit micro switches to control up and down over travel. A small induction motor was used to power the winch controlled by up down and on off switches. The entire setup weight less the 300 lbs.

@sampull3541 4 жыл бұрын

Neat!

@baldanddangerous1572 4 жыл бұрын

really enjoyed this one jimbo,totally dif build from all others.....thanks jimbo...all the best,stay safe.............dougie

@akilmurugesan3023 4 жыл бұрын

That's a clean build ,keep it up

@joserocha4267 4 жыл бұрын

Me gusto jimbo

@kp724 4 жыл бұрын

теперь еще и сварочный стол туда же 😉👍👍🔥🔥🔥

@linsvagner 4 жыл бұрын

Hello, Jimbo's. My name is Vagner Lins, from Brazil. Very good your workes.

@thanhucle6274 4 жыл бұрын

Hay quá bác

@klausreviewscraftrestore3152 4 жыл бұрын

key bo man.

@TP-xi7ri 4 жыл бұрын

Very nice I enjoy all of the videos you have made. your fabrication and video skills are excellent. TP

@waltermila 4 жыл бұрын

nice Jimbo's Garage!!!

@amilcarmoncada1801 4 жыл бұрын

Excelente trabajo Jimbo muy buenos tus videos y el producto final quedo estupendo, saludos desde Venezuela.

@imversatile4106 4 жыл бұрын

Thank you sooo much sir I m also a welder n you are my inspiration sir 😍🥰🥰 Loves from india 🇮🇳

@danielcardosoagero7952 4 жыл бұрын

Very good, a hello from Brazil!!! :D, i enjoy very much watching your videos

@BARTSGARAGE 4 жыл бұрын

Great job. I like wchatch you'r video's. I'm huge fan 😁

@mantaz603 4 жыл бұрын

It's awesome. I would hate to have to pay for it but it's a great concept.

@jacekostrowski8373 4 жыл бұрын

Ok👍

@casycasy5199 4 жыл бұрын

realy nice job.wish you showed how that light works when it hit the right hight

@user-ri4pz3pq7r 4 жыл бұрын

Класс

@sheph7ceo799 4 жыл бұрын

Nicely built, very clever design, could have other applications. Over time, because the lifting cable winds from two different ends of the same drive shaft will not one end of the table eventually get ahead or behind the other end? I see maybe an "open-loop" problem.

@andejo4436 4 жыл бұрын

I don't see your HTP 2400?? What the heck! Great Video. When I bought my HTP they asked how I heard of them. I told them Jimbo's garage. She said her daughter loves your channel.

@LemonySnicket-EUC 3 жыл бұрын

Great project 👍 when will the bench dogs be on your site for sale ?

@Jan-mu6vs 4 жыл бұрын

If it's as wide as the client wants it is as wide as it should be...

@slipknot7424 4 жыл бұрын

Man that’s a really nice ping pong table. 👍🏻😂😂😂😂

@yva5869 3 жыл бұрын

👏👏👏👍

@stefanmeier6763 4 жыл бұрын

How is the light beneath the table provided with power?

@MrDangerous64 3 жыл бұрын

What brand is the lift motor? That would be useful for a lot of things.

@rv-eb3wu 4 жыл бұрын

is there a connection that comes together at the ceiling for the electricity for that light underneath the table, I figure the rest will plug in with a cord when it;s down.

@peterj5869 4 жыл бұрын

Will there be a stop to prevent a collision between the ceiling and mountains and buildings?

@drich6816 4 жыл бұрын

What wire size are you using? .30

@sheep3854 4 жыл бұрын

That light is interesting, I dont see any cables on the table when the frame is removed, how does it work? Is it battery powered?

@Crewsy 4 жыл бұрын

There is a cable reel above it on the right that you can see at the end that plugs into the table. The wire is black but you can see it against the cabinets on the back wall

@thar6664 4 жыл бұрын

Great work jimbo!! Thats some awesome and fab and design skill you out into the project. Any hint as to the total cost of the project?

@dorianfulton7168 2 жыл бұрын

MDF... light?!!!

@volla40 4 жыл бұрын

Are we going to see a short video when everything is complete?

@buckWildest 3 жыл бұрын

Are you related to O'Dell concrete? You both sound really similar!

@robthewaywardwoodworker9956 4 жыл бұрын

Almost feels like it would have been cheaper to add on to the garage! LOL

@kristoffscuba5466 3 жыл бұрын

Why not just have a standard shop bought large metal framed folding leg table, and fit threaded lifting eyes in each corner. Lower the 4 lifting wires and clip to each eye, lift it with the motor and fold the legs away on the way up. Seems like the retracting metal frame is totally unnecessary. As is the custom table. Could do the above in an afternoon with readily available items.. suppose you’d have to ensure the table could take the weight, but even if you had to brace it..... much more straightforward..

@neyfrossard 4 жыл бұрын

First

@theessexhunter1305 4 жыл бұрын

First...........

@Ayjkuiwiwe 4 жыл бұрын

loool

@9856CB 4 жыл бұрын

I hope he doesn’t live in a dusty area. My garage gets pretty dusty

@SandBoxJohn 4 жыл бұрын

The setup I described in my other post had a cover above the bottom cord of the trusses and a curtain that surround layout when in the lifted position. Kept the railroad quite clean.