Motovox Mini bike build and road test

Рет қаралды 19,055

10 ай бұрын

Motovox Minibike build and road test
Built a Motovox mini bike using a GoPowerSports Tillotson 212 pull start engine and other GPS parts. Road tested the bike for 0 to 30 times and top speed.
212 Ghost kart racing engine playlist - • 212 Ghost VS 206 Brigg...
Mega moto e-bike playlist - • Raced the QS120 e-bike...
Predator 224 playlist - • Predator 224 gets a 26...
Mega moto performance playlist - • Mega Moto 80/105 unbox...
Bonanza minibike playlist - • 1.3 ratio rockers vers...
Coleman cc100x Predator 212 playlist - • Free Predator 212 perf...
Road rebel go kart playlist - • Kart vs scare chair / ...
Coleman cc100x/DB003 minibike micro bike playlist - • Will a Trumpet exhaust...
Coleman cc100x playlist - • Coleman CC100x Minibik...
Doodlebug playlist - • Is the Doodlebug minib...
Coleman CT200U-EX playlist - • Coleman CT200U EX mini...
Azusa minibike playlist - • Is a Ghost faster with...
Coleman CT200U playlist - • Coleman CT200U minibik...
Predator /Tillotson playlist - • Free Predator 212 perf...
Minibike playlist - • Mega Moto 212 goes 60 ...
Subscribe for more minibike content: kzfaq.infofea...
Instagram - Doubledown555Black66
_______________________________________________________________
Parts used
Street tire - www.gopowersports.com/15-x-5-...
Tillotson 212 - www.gopowersports.com/212-til...
Front suspension kit - www.gopowersports.com/minibik...
Rear brake - www.amazon.com/gp/aw/d/B0BPN9...
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so. The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Пікірлер: 97

@andrewkuhtz 10 ай бұрын

Nice looking bike, i love those frames. They always look sweet stretched👍

@gabrielmorales9908 10 ай бұрын

*sighhh* “Honey, the neighbor got another minibike…” haha

@andrewkuhtz 10 ай бұрын

Lmfao🤣

@JarridT. 15 күн бұрын

Those handle bars are fresh

@brentprickett618 9 ай бұрын

I'm obsessed with mini bikes. Love your channel! Your videos are well edited and you have alot of sense lol. We are just kids who got older.

@Black66 9 ай бұрын

Yes, we are! Thanks for watching the videos.

@dandeve 10 ай бұрын

I have to let you know. Because of you I bought a welder and have been attending KZfaq University so I can start building my own bike.

@Black66 10 ай бұрын

Awesome!!!

@Turbo44mag 7 ай бұрын

I love that frame. (After you restore it especially)

@dmann1209 10 ай бұрын

Excellent! Good looking mini. I would enjoy seeing a build that could possibly be used as a daily commuter. I liked the bones of the full suspension build. Awesome content.

@gloriabauer2392 10 ай бұрын

Another Great Video....I like to read the other people's comments.

@Tyresong 10 ай бұрын

The first modification to the Tillotson has to be a heavy duty Flywheel cover Powder coated Black to match the rest of the bike, and a Cars and Cameras sticker lol, seriously try some 1.3:1 ratio rockers. then Porting with the Ratio rockers, and then go back to stock rockers with a DynoCams CM grind or a Fire265

@ALMIGHTYGARAGE 10 ай бұрын

Man i just sold my motovox and monster moto last week and ive been missing my motovox now i really really miss it this is sweet even though there small bikes they just look sweet

@darintraver4983 7 ай бұрын

That looks so sick !!!! So cool 😎

@GeneralKam 10 ай бұрын

looks sick man!

@thereal_bigchop 10 ай бұрын

I’ve been waiting for a Vox build, unless I missed a different video containing a Vox lol❕ always great content

@BloodtypeTHC 10 ай бұрын

I just built my first bike after watching your videos for over a month. Predator 212 on a Coleman CT200u… to the people who haven’t built one yet, DO IT. I’m only 200$ into this project and the top speed is terrifying lol

@TuckerHill10 10 ай бұрын

How much did you pay for the frame?

@BloodtypeTHC 10 ай бұрын

@@TuckerHill10 hundred bucks

@bernningreen567 9 ай бұрын

I had that frame but it snapped while i was doing 65 so i got a mega moto 80 now

@bernningreen567 9 ай бұрын

Mega moto is a Way better frame

@mikesbarn1858 10 ай бұрын

I love your channel. Always use high speed adhesive stickers.

@Black66 10 ай бұрын

Thanks! Good point ! 👍👍

@jonlambshead5115 10 ай бұрын

That's A Pretty Good Speed For A Stock Engine , I Am Thinking Of Putting A Honda 6.5 HP On One Of My Go Karts

@Skill_Wize 10 ай бұрын

That sticker lowers your hp by 5mph 😂

@turbocoupe9212 10 ай бұрын

Actually it raises it when your parts are free.🤣 did I just say that..?

@shineyboi 2 ай бұрын

New sub . I want to get into these.. your mini bikes look cool !

@Black66 2 ай бұрын

Welcome aboard!

@user-cb2rq8iy9x 10 ай бұрын

Hey Black66 if you see this comment please do a review on a 212cc dukar engine. I need information on how to upgrade it and get at least 60+ out of it. I know it's a great engine and can easily produce these speeds. I have a 212 dukar and at some point reached 63mph. At the time I was very new to mini bikes and changed some stuff up. I only had 26ld valve springs and a bypass, 15in street tires and straight chain. If possible I know you'd be able to give the best review over anyone on KZfaq. Please please please black66 try to make this happen for us. We love what you do and keep up the GREAT WORK!

@Black66 10 ай бұрын

Thanks! I need to do a Ducar.

@Spacecruizer203 10 ай бұрын

That is one Beefy minibike 🔥🔥🔥🔥 she hot ...u know he gets the free shipping or sumtin

@user-cp8gw2lm7e 10 ай бұрын

where do you find the frames at

@mattplauman4824 10 ай бұрын

I really like your videos! Can you tell us what lift you use when working on the mini bikes or refer me to a video where you have explained that already?

@davidmalone8565 10 ай бұрын

Amr supercharger next!

@romanleonard2154 10 ай бұрын

Could you do a stock 301 for comparison to a small block?

@bigbooste9264 10 ай бұрын

Mod for mod would it be smarter to start with a 224 predator or 212 Tilly

@chelseacarrillo7901 10 ай бұрын

Where can I get that gas tank?

@LordFred69 10 ай бұрын

i swapped a Predator ghost from a 196cc on to a coleman c200. Now it vibrates so hard its almost unrideable. Im using the GPS riser and a TC. Everything is tightened down. Amy recommendations for troubleshooting?

@user-dd1ts8sy9w 10 ай бұрын

I took mine out of the box and zip tide the Spring throttle linkage., Put it on a trail, master storm. It ran 47 miles per hour. You are Going to love building this engine, Now it is on my Coleman CT 200 UES. Running 70

@Black66 10 ай бұрын

Check out the Doodlebug playlist for many different parts combos with the Tillotson 212 kzfaq.info/get/bejne/rpxhfa6TkqfDaGg.html

@CoreyBillingsly 4 ай бұрын

There is an entire world of centrifugal clutches out there and since i have a 75 tooth rear sprocket, getting a 12 tooth clutch should make the gear ratio 6.25, I think? and if I get a 15 tooth clutch, it will make it a 5 g.r., right? But I want to go for overall top speed so which one would be better? Or are those ratios even correct? Since i want to run a predator 212 on mine, I'm not sure what chain to use either, since i doubt that the original chain will work. Its now a #35 Chain I'm pretty sure. Also since i want to be able to reach speeds of 50 or more I dont want it to break on me.

@CoreyBillingsly 4 ай бұрын

Black 66, I'm new to minibikes and I own a motovox. I've been watching your videos and trying to do my research, but I'm just not sure what parts to buy and what parts are compatible with what. I'm wanting to put a predator 212 on it and make it as fast as I can. I'm looking at maybe a Nibbi 24mm carb, but when i look at the carbs it shows that the 28mm is designed for 200-250cc engines. I see that you are running the 24mm a lot of the time. Is there a reason why?

@encin0sa 7 ай бұрын

Where did you buy the chain guard ?

@user-jb1po2op3k 3 ай бұрын

Where can I buy the thing where the sprocket goes like the cover so my chain won’t fall off

@kevinclear4007 10 ай бұрын

I feel like you should put a wet nitrous kit on it. Push the envelope.

@davidvasquez1160 2 ай бұрын

Do you think these motovox frames are better than the mega moto frames?

@jaxone1259 10 ай бұрын

Give to me if your wondering what to do with it next. Nice Little Cruzer 👍

@quebolahoe 7 ай бұрын

Where can I find that fuel tank? Thanks in advance

@gilzminibikes 9 ай бұрын

What kind of sprocket is that? Where can I get it

@encin0sa 7 ай бұрын

What hydraulic brake kit or system did you use and where did you buy it? ?

@Black66 7 ай бұрын

The link for the brake is in the description of the video.

@Perc30- 10 ай бұрын

Take the governor off and see how fast you can go with just that and find the best gear ratio

@Black66 10 ай бұрын

I will do some follow up videos on this bike.

@samceja2429 10 ай бұрын

Can you please tell me what size chain you are using? Thank you for your time.

@Black66 10 ай бұрын

35 chain on this bike. I try and use RLV gold on gold or gold on black whenever I can.

@CX2Pilot 10 ай бұрын

Can you tell us what paint you use on your minibikes? It looks really nice on the bikes that you have painted. I assume no primer is needed if there is no bare metal. 400 grit the old paint to prepare it for the new paint? I want to paint my minibike soon.

@mikesbarn1858 10 ай бұрын

Remove old paint completely. Clean frame with acetone. Mild sanding. Primer coat. Very Mild sanding. Paint with finish color. Repeat. Finally gloss epoxy clear coat

@CX2Pilot 10 ай бұрын

@@mikesbarn1858Thanks for the information! I was hoping Black66 could tell me the paint that he uses on his minibikes. He has so many videos and questions that he probably isn't able to answer them all.

@jacobwilson7912 Ай бұрын

Where can I get the gas tank

@quintynmcintyre2553 14 күн бұрын

Your life looks like a dream lol

@edmarkaleman5282 5 ай бұрын

Where can I get that gas tank? It looks amazing!

@Black66 5 ай бұрын

Thanks! Brad Hill. I think he is on Facebook

@ryancottingham925 10 ай бұрын

Could you post the link to those tires?

@Black66 10 ай бұрын

Here is the link www.gopowersports.com/15-x-5-6-ultimate-mini-bike-street-tire/

@jeffdubin8974 10 ай бұрын

Can you post a link for the gas tank

@Black66 10 ай бұрын

I dont have a link for the gas tank. Brad Hill was on Facebook . Maybe you can find him on there .

@MegaMelvin33 10 ай бұрын

Please tell me how to find that tank

@Black66 10 ай бұрын

Brad Hill is on Facebook. Or at least he was...

@user-cp8gw2lm7e 10 ай бұрын

where do find the frames at?

@Black66 10 ай бұрын

Yard sales, Offer up , Craiglist etc

@CoreyBillingsly 4 ай бұрын

Really if you could please help me, Id like to just have a list of the best parts that you would use personally as if you were starting entirely from scratch building a motovox bike with a predator engine on it. ---clutch, chain, carb, brakes, header pipe, jets for the carb, rear sprocket (if needed) and anything that is used really. The help would be very much appreciated. Otherwise I just have to buy parts and hope for the best. XD

@JarridT. 15 күн бұрын

What kind of tires are those??

@Black66 15 күн бұрын

Ultimate street tires GoPowerSports

@Happyviews82 10 ай бұрын

Ide love to see an ethanol builds on that one 👀

@nickrupp2336 10 ай бұрын

For shits and giggles, do a 3-1 ratio with a stock engine. Then try a modified version.

@TheJacksons521 9 ай бұрын

I need a brad hill tank😢😮 been saying this for a couple years now can’t get the contact

@Black66 9 ай бұрын

Not sure how to contact him other than Facebook.

@67Dimebag 4 күн бұрын

I'm putting stickers all over mine lol

@irunwithtexas 9 ай бұрын

Hey @Black66 I’ve been a follower for a long time I like how you added the @Gopowersports sticker that we smooth bro keep bring that great content

@Black66 9 ай бұрын

Appreciate it!!

@angelrojas2823 10 ай бұрын

Where did you get those handle bars? I looked at the description, but it didn't say.

@hendersonwilliamk 10 ай бұрын

Curious also, they have some that look similar on Amazon.

@Black66 10 ай бұрын

Amazon

@Tru4High2Class0 8 ай бұрын

@@Black66what were they called? I love the angles on them

@marisolestrada6496 10 ай бұрын

Do you know why my pull start is really hard and won’t start?

@kbeezyyyy_5069 10 ай бұрын

set ya valve lash wrong or u hsve to set it

@andrewkuhtz 10 ай бұрын

Set ur valve lash to .003”, its set to tight…

@AdamOpheim 10 ай бұрын

Gear it to the moon without a gov. and put an electric hub on the front to get it off the line. Ever get a measurement on that wheel? Is it really 15"?

@Black66 10 ай бұрын

That's a great idea! It would be awesome with a front hub!