Love watching these videos because I am a father of three and try to keep a nice lawn. Always an adventure! Keep it up!

you have beautiful daughter and son. nice family you got there. best of luck for you all

I've got a couple that need moving in my yard and i've been putting it off for a year. Thanks for the motivation, I needed it!

I've found that if I put a plastic lawn bag down to collect the dirt from my hole it is much easier to clean up after I've installed the head.

A little trickier with the PVC lines I installed 30 years ago, but it can be done as well - just a little more digging.

lol, it took me a while to figure out what your little son was saying, hilarious! The camera lady or camera guy was sort of naked and only had underwear on. Adorable.

“Well sort of naked you have underwear on...” 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

One thing to think about is the depth of the funny pipe in regards to if you plan to aerate in the future. Other than that nice job! 👍🏼. Looks like a great spot to put a head for when the kids are sitting in the lawn chairs and you sneak away to turn on the irrigation system 😁

The little one was priceless

Thank you for this video. You make it look so easy that I feel I can get starter on my project this week end.

Awesome video. I just trying to dig my new sprinkler system and this is the only video that talk about it. I did everything by my self but now, seens that have something like pipes and I just can't dig enough.. some advice?

Very helpful tips one other way I layed the piping was I used the edging tool like you used and made a single wedge and prying up the sod very slightly then tuck in the funny pipe or pvc I do both then mash the sod/soil back together leaving only a thin seam. Thanks for sharing I wanted to share one of my tricks too😁😁👍👍

miss this guy

I did the same exact thing this past weekend

I was just literally thinking about doing this project in my yard!! Thx for some guidance!!

I need to move a few sprinklers this weekend. Very helpful video!

Can swing pipe be used instead for such long distances instead of the flex pipe? Thank you.

very helpful. I've seen a lot of these. This was the easiest to deal with and learn from

It needs to be deeper to avoid being pierced by the aerator every Fall.

Thanks for your video. I once had to make a quick video of the noise a worn out wheel bearing makes, and that's right when the neighbor's yard guy started his leaf blower. Unlucky timing. Had to do the video again later.

I couldn’t see the connection to the old funny pipe. If I have a white main pipe with a short funny pipe connected to it and the old sprinkler I’m removing, would I unscrew the connection to the white main pipe and screw a new right angle piece to connect the new funny pipe, or would I just cut off and remove the existing funny pipe off the connector to add the new pipe to the old connection, or would I just cut the old funny pipe midway and just use a piece to join the old funny pipe with the new funny pipe and not mess with the connection to the white pvc main line?

How do you connect the flex line to the current PVC pipe? I need to move a sprinkler and didn't hear you cover this.

Well that's a nice shot of the back of our head

Great video. You gave me an idea and now to execute. lol

You make it look so easy!...thx

Thinking about extending my patio and i have sprinklers in the backyard...so we are going to have to reroute the lines in order to extend....

Your kids make your videos the best. Did you install your irrigation system initially?

You need Better camera angles! otherwise it was good.

@grass daddy, where did you get that little torch? ? And there is no concern you would melt the Pipe?

One reason to to bury the line deeper than you did is so it doesn't ever get damaged in the future if somebody runs an aerator over that spot, pulling 3-4" plugs out of the dirt.

Good Job thanks!

At least your neighbor mows. it's been 3 weeks since my neighbor's last mowed.

Helpful video, but rocks to hold the Riser in position? I placed pieces of rubber between the rocks and the Risers to hold them where I wanted them before replacing the dirt and sod. Because I don't know if the vibration I saw in the uncovered Riser while checking for a leak could cause the rocks to wear holes in the Riser. Also, in a pinch very hot water can be used to soften the funny pipe, it just takes longer ......

If I want to add maybe a couple more sprinkler heads but I have no access to the pvc pipe, would it be functional to use funny pipe for it? Long story short: A company that I paid to extend my driveway screwed up zone 1 (THEY DIDN'T CAP IT! BELIEVE OR NOT!) So an area of my yard died because we can't use zone 1 anymore because we don't feel like it is safe to see water gushing out in the driveway between 2 cement plates. I want to tap on another zone to cover it... but with funny pine and 2 more heads? Yay or Nay?

Did you originally put in the system yourself or did you have it installed and now you just do the maintenance on it? I was thinking about possibly a system down the road, but I've got an acre yard, and don't think I'd be able to put everything in myself to start with.

FYI the funny pipe is threaded on to the elbow connector. It's not a straight ribbed fitting.

Great job, thanks for the video!!!

Adjust the left stop with the water off.

Hows that pipe working for you? I am planning to install and deciding if need to buy PVC or this pipe will work out well in all weather. I am in TN.

I am a 43 year veteran of this profession. NEVER run funny-flex-pipe more than 24"-30" max. Not only is it manufacturers standards it is also very good service common sense. If you do not understand the service part, you are not a professional.

Slit and stuff .... This project would take me about 10 minutes.

It’s like you read my mind. I’ve gotta move a sprinkler soon too. Thanks for the video man! What other projects you got coming up that I need to do too? :P

You never checked for s leak before re burying it

I did my whole system with Sch 40 PVC. Have had more than a few breaks. Think I am going to use your setup for my future repairs.

Man that line is shallow. That was no 6” on that run. I’d be super sketchy about aerating over that line.

Very nice

How much grass/dirt do you put around the sprinkler head? Can you show us what your other sprinkler heads look like in the lawn? I never noticed them in your other videos...

Isn't there a limit to how far you can go using funny pipe?😊

But I only have 2 helpers not three...:)

GD What editing software do you use? Is it possible to do a voice over and cutting out the sound the camera is picking up, especially during a time lapse Great info though

Lol @7:20

Interesting.. used to old white pipr and glue. This Resists crush and fracture better?

What the hell is funny pipe, I thought sprinkler systems were PVC

I don't recommend heating the funny pipe, and that's quite a run for funny pipe... Also I think putting the head by the blue pot would have been a better location for head to head coverage. Good job though.

Wonder what part of the country this is in

I can’t see what you are doing to connect the line!

I wish this video was more helpful but the connection to the new line and moving the existing head was not caught on camera.

6" deep enough for frost line?

You can scare the old funny pipe with razor knife little heat pops right off

I’m sure your mowing doesn’t annoy anyone

Why do U always use ur left foot for everything and ur right handed

It's not easy lol