MPC ONE Sampling Tutorial | MPC ONE Sample Chop | MPC ONE Tutorial
Рет қаралды 64,372
Күн бұрынHere is a video on some advanced mpc one sampling beatmaking for those of you how to enjoy sampling from vinyl or your phone. Here i am going over the Sampling workflow using the Pad-Tap mode on the akai mpc one / live or x i feel like this sampling mode is not talked about as much as it should be. it is a very useful technique that can be extreamly helpfull for those of us doing sampled based hip hop beat making sounds or songs. i hope you guys enjoy this video. Thank you guys for watching. Blessings
My Beat Making GEAR I Use:
MPC ONE Link: amzn.to/3fisJ1q
Turntable Numark pt01: amzn.to/3n5BoYH
Elektron Digitakt Sampler: amzn.to/3fPTM3F
Studio Monitor Speakers: amzn.to/3zfUgIf
Headphones: amzn.to/31JRueN
Cable to Connect Phone to MPC for sampling: amzn.to/2Xxy0eN
Iphone Headphone Jack: amzn.to/3dbod22
LaCie 2TB HD : amzn.to/3gq8Jc7
SD Card: amzn.to/3suOKhg
Follow Me & Contact Me:
IG: / malo_beats
TikTok: www.tiktok.com/@malo_beats?la...
marioose90@gmail.com
Listen to my music here:
/ album .
open.spotify.com/artist/65INI...
Time Stamps:
0:00 - intro
2:50 - Slice Mode
3:30 - Editing Sample Chops
7:24 - Pad Hold Function
MPC ONE Sampling Tutorial | MPC ONE Sample Chop | MPC ONE Tutorial
MPC ONE Sampling Tutorial | MPC ONE Sample Chop | MPC ONE Tutorial
MPC ONE Sampling Tutorial | MPC ONE Sample Chop | MPC ONE Tutorial
MPC ONE Sampling Tutorial | MPC ONE Sample Chop | MPC ONE Tutorial
mpc one tutorial,mpc one workflow,mpc live 2,mpc live song mode,akai mpc one,akai mpc one jam,mpc x beat making tutorial,mpc one hip hop beat,mpc one beats,mpc one sounds,mpc live sampling vinyl,mpc live tutorial sampling,how to chop samples,mpc one sampling workflow,mpc one sampling,mpc one sample chop,mpc one making a sample based beat,mpc beat making tutorial,MPC ONE Sampling Tutorial,MPC ONE Sample Chop,MPC ONE Tutorial,mpc one sampling vinyl
@Webzterr 2 жыл бұрын
When fine tuning start and end points, hit shift and you have an option to snap to zero crossing to make sure chops never click or pop at the ends
@malobeats 2 жыл бұрын
Thank you for this information appreciate you dropping by. 🙏🏽
@DowntownBoom 2 жыл бұрын
Cool tip - thanks for sharing (is caring)
@Webzterr 2 жыл бұрын
@@malobeats thanks I enjoy your content.
@rahvisionproductionz2929 11 ай бұрын
Hey thanks bro for that snap-zero tip! 💯
@thinkognito344 2 жыл бұрын
first video i seen just simply explaining the sampling feature on the mpc sampler... finally... thanks man
@malobeats 2 жыл бұрын
Thank you so much for the kind words and I also appreciate you taking the time to check out the video. I’m glad it was helpful. Blessings to you
@corradospada 2 жыл бұрын
I have mpc one for 2 weeks and thanks to you I learned a lot ... thanks !!!
@sinewaymusic 2 жыл бұрын
This was a SUPER helpful tutorial! You really demystified the different sampling modes and I love that there's a quick way to just add a sample onto an existing program. I just never cared to read the manual but I'm glad I'm following your videos. Thanks!
@malobeats 2 жыл бұрын
Hey David, thank you so much for taking your time and stopping by and also sharing your input. Yes I’ve been using these functions a lot lately as I’m building my sample chops and programs there’s times I want to add a few more hits to the same program and this has been very useful.
@khrysocupe603 2 жыл бұрын
Sup Malo, I just want to say you inspired me to purchase my own MPC one - it comes in tomorrow! For such a small channel you’ve been cranking out some dope content that’s definitely helped me and others learn more about the MPC workflow and get over that learning curve. From the video quality, audio, and editing I can tell you put in a lot of work brother & you and your channel have big things your way! Keep up the good work!! Subbed and thank you
@malobeats 2 жыл бұрын
Hey brother, man you have no idea how humbled I am after reading this message, thank you so much for taking some time out of your day to simply watch this video, it means a lot. I receive your words and I don’t take them lightly. Thank you for your support and I am looking forward to keep pushing with the channel. Congrats on your MPC by the way I’m sure you already have it in your hands 🙏🏽🙏🏽🙏🏽
@timothyruffle4777 2 жыл бұрын
I used to make beats on garage band … all sounds and drums … then went on to machine but I don’t really like the work flow on it… been off for ten years but after seeing this bad boy I can’t waittt!!!! J dilla big inspiration!! Can’t wait
@planemo191 Жыл бұрын
Greeting from the UK bro! Your vids are amazing. I find your general vocal delivery and clarity of speech top notch, perfect when listening to instruction. Thanks so much!
@ashorii 10 ай бұрын
these videos are amazing. Thank you so much for the time you put into this man. respect.
@nelsonlemusimagery Жыл бұрын
Good tutorial, thanks for your work. You just helped me up my sampling game. Thanx!
@splitlip100 2 жыл бұрын
Bruv Your channel is so helpful, I've been lost with the MPC One and your vids are the best thing I have been able to find to get my head around it. Respect fam.
@malobeats 2 жыл бұрын
Oh man, thank you so much for taking the time and sharing this feedback with me it really helps a lot and it means a lot too. I’m glad that these videos have been helpful in your journey.
@waiji_le_feroce Ай бұрын
Amazing ! very understanding and helpful
@BestKeptSecreization 2 жыл бұрын
Yesssss that’s what I wanted to learn , more sampling techniques on my MPC UNO ! Great video King ! 🔑👑👑👑 Keep them coming… Peace
@malobeats 2 жыл бұрын
Tha know you so much for taking your time and checking out the video🙏🏽🙏🏽🙏🏽 really means a lot and most definitely we gonna keep them coming. 💪🏽💪🏽 blessings to you brotha
@chenelius Жыл бұрын
Great video. Thanks for sharing. It's always fascinating to me to see other people's processes . I like yours, it seems very methodic. Subscribed
@kekoaschlesinger7941 6 ай бұрын
Super helpful video man. Love the content 💪
@PeteOnTheBeat 2 жыл бұрын
Still enjoying and discovering the songs you shared from your YT "crate"! Thank you! I started making "beatmaking" videos and in the next one I'll probably sample something from your playlist and I'll give you a major shoutout! You deserve it! Thanks!!
@malobeats 2 жыл бұрын
Oh that’s interesting brother, I’m excited to check out your new videos And I’m glad you’ve been enjoying that playlist I keep updating it as a bump into new record so be on the lookout.
@des7638 2 жыл бұрын
Great teacher. Thanks man
@illanoiz1 2 жыл бұрын
Thanks….haven’t been sampling a lot lately and definitely haven’t used this feature so good tips. Salute
@malobeats 2 жыл бұрын
Thank you so much for taking your time and dropping this comment I’m so glad it helped you and your music creation workflow. Blessings to you
@pablo65315 Жыл бұрын
Wonderful. Thank you
@ilfantasticobananajothesci3922 Жыл бұрын
"man darf in den tasten sein" - love this instrument
@antoniusmoments 2 жыл бұрын
thinking of picking this up. Just started getting into production. Enjoying my time in Logic Pro. Huge hip hop fan and wanted the 2000xl but this one seems to be the way. I wanna get into diggin into the crates for a sample. Thanks for the video!
@malobeats 2 жыл бұрын
Hey broth, thank you for sharing this here. Yes I think the MPC ONE IS A smart choice it just does everything so much faster and convenient and it also sounds amazing
@RuffneckBizniz Жыл бұрын
Great tutorial thanks
@jonnyhead 11 ай бұрын
Brilliant tutorial as always 👌🏼
@zaleschukmusic 2 жыл бұрын
This is so convenient, thanks for sharing!
@malobeats 2 жыл бұрын
You're so welcome! Thank you for taking the time and sharing your feedback 🙏🏼
@mikedegrazia 2 жыл бұрын
Thanks for that info man. More stuff i never knew....
@malobeats 2 жыл бұрын
Thank you so much for taking the time and sharing your input. Blessings to you
@jaedub59 2 жыл бұрын
You just got me to subscribe to your channel with THIS video!! Great info with in...much appreciated!
@malobeats 2 жыл бұрын
Hey, thank you for taking your time and sharing this input, I really appreciate your support also. Blessings 🙏🏽🙏🏽
@cruepprich 2 жыл бұрын
Wow. Super useful, Malo. I always wondered what the other sampling modes are for. Thanks!
@malobeats 2 жыл бұрын
Glad this was useful brother
@rahvisionproductionz2929 2 жыл бұрын
Btw: yes the mpc one is a monster comparing to the 2000 etc. Love your videos I just wish the video was much larger to see the words & buttons you're directing us to... you explain it well.
@ahmada7846 2 жыл бұрын
This is great man thanks!
@malobeats 2 жыл бұрын
Thank you for taking the time out of your day to check out the video and dropping by really means a lot. Blessings
@tuneroneff Жыл бұрын
Gracias!!! I really appreciate what you share!!!
@malobeats Жыл бұрын
Thank you so much for your support brother. 🙏🏽
@TheOfficialBlvckSpider 2 жыл бұрын
Dam man i became a hard die fan of your work and what you do🔥💪🏽 very much respect and love🇲🇽
@TheOfficialBlvckSpider 2 жыл бұрын
By the way! That error you made! Opened up my mind even more and made me understand why you have to hold down the pad. Man im so entertained 😅
@ydnaanicep2196 2 жыл бұрын
Good info thanks
@wambowill1 2 жыл бұрын
You the man!
@RosssRoyce 2 жыл бұрын
Very good!! Thanks! ⭐️
@malobeats 2 жыл бұрын
Thank you so much for taking the time in watching a video blessings to you.
@rahvisionproductionz2929 Жыл бұрын
Hey malo, as a mpc one newbie I must say I like your video presentation. Including errors I've had made the same mistake with the holding pad issue. Lol. The way you teach is very informative & simplistic to learn. I've finally made progress on the basics already thanks my brother 💯💯💯
@rahvisionproductionz2929 Жыл бұрын
Oh btw: you're not alone malo, I also come from the mpc 2000xl as well. I get it lol
@benicrnk712 2 жыл бұрын
eyo your work is really helpful ! thx
@malobeats 2 жыл бұрын
Thank you brother I really appreciate you taking the time in sharing your feedback it really means a lot.
@CDMESD 2 жыл бұрын
This was a very cool tutorial/beat build.
@malobeats 2 жыл бұрын
Thank you so much for taking the time out of your day to check out the video and leaving this comment. I’m glad this was helpful. Blessings to you
@versatiled4468 11 ай бұрын
Great Teacher Bro Appreciate it💯❤️🩹❤️🔥🎶🎶
@ShinyDvibe 2 жыл бұрын
Awesome!
@Metamophisis 10 ай бұрын
Great 👍 video man 📹
@AgustinDavidF 2 жыл бұрын
Very well explained it! New subscriber here 🙌
@MrPSWAYS 2 жыл бұрын
Always good stuff 👍
@malobeats 2 жыл бұрын
Thank you so much for taking your time and checking out the video it really means a lot.
@dassolosyndikat5113 2 жыл бұрын
good job thank you for this
@malobeats 2 жыл бұрын
I’m so glad it helped in someway, thank you so much for taking your time in checking it out. It really means a lot blessings to you
@rahvisionproductionz2929 2 жыл бұрын
Hey Malo! You are a monster involve in studio set up. I just noticed your video pic of your mpc one & pt01 turntable lol lol funny I just bought 2 PT 01 numark tables to consolidate (compact) my studio. Great minds think alike.. it's really all you need
@MadameS81 Жыл бұрын
Awesome tutorial-the MPC One is wayyy different than the 2000xl but I'm a fan of both!
@LZ42BK 2 жыл бұрын
Very nice bro.
@EARTH.HARMONY.SOUND.HEALING 2 жыл бұрын
great stuff here.. thanks.. love the lighting too! found you from SAI T's
@malobeats 2 жыл бұрын
Thank you for taking the time and watching this video, it really means a lot brother. Blessings to you 🙏🏽
@30MrBappMan 2 жыл бұрын
Keep up the great work brother 🤝💯
@malobeats 2 жыл бұрын
Thank you so much for your support it really means a lot. Blessings to you
@horvathjanos9636 5 ай бұрын
Too easy cutting ... older mpc-s forever :) Great video.
@malobeats 5 ай бұрын
No doubt, thank you so much for taking the time to share this input
@Mar.Escobar24 Жыл бұрын
I thought it was funny that I was looking for MPC One sampling tutorials and I clicked on this one and saw you have the same setup as me with the Numark PT01 Scratch 😂 Only difference is I have the black MPC. Dope video!
@g-track5065 Жыл бұрын
Thanks Brother
@MassiveJib 2 жыл бұрын
Man your videos are so addicting
@malobeats 2 жыл бұрын
Hey Joseph, Man this has been the best comment I’ve read yet I’m really humbled by this brother thank you so much for your support and taking the time to watch some of my videos it really means a lot. 🙏🏽
@djspair 2 жыл бұрын
I did not know about sampling on slice mode. That's a sick feature!
@malobeats 2 жыл бұрын
Hey brotha, yes 90% of the time I’m sampling and slice mode since it gets me halfway there already when I’m creating my programs it’s been very convenient for my workflow.
@djspair 2 жыл бұрын
@@malobeats An ingenious shortcut to say the least. This MPC keeps giving.
@RSotoBeatz 2 жыл бұрын
Thanks bro ✌🏾💯
@malobeats 2 жыл бұрын
Thank you for taking the time to watch the video beotha
@leoopokat8235 2 жыл бұрын
very helpful fam
@malobeats 2 жыл бұрын
I’m glad it was helpful, and thank you for taking your time to leave your feedback it really means a lot. Blessings to you
@g-track5065 Жыл бұрын
Thumbs up!!!
@RhymingontheBeats 2 жыл бұрын
Dope !
@malobeats 2 жыл бұрын
Thank you for taking your time to check out the video and leave in your feedback. Blessings to you
@franciscoramoncleriguesrov7187 2 жыл бұрын
Gracias por compartir experiencia, no se inglés y tengo una mpc one desde unos meses y estoy trabado sin avanzar al no saber inglés. Un gran error de Akai no tiene manual en castellano pdf junto al otro en inglés ( tanto trabajo le cuesta a una marca tan grande como Akai???) Es una makina muy muy completa y muchas opciones funciones y variantes con 400 pág solo en inglés aaarrrggg …. Los subtítulos en español son de agradecer…
@jahilw1975 2 жыл бұрын
🔥🔥
@malobeats 2 жыл бұрын
🙏🏽
@Melodic623 2 жыл бұрын
🔥content. Thx.
@malobeats 2 жыл бұрын
Thank you for taking your time to check out the video and drop your feedback it really means a lot. Blessings to you
@Melodic623 2 жыл бұрын
@@malobeats no problem I learn a lot from you. You have my support
@TomFirth 2 жыл бұрын
Really useful video.
@malobeats 2 жыл бұрын
Hey Tom thank you so much for taking the time and sharing your feedback. Appreciate you, Blessings to you Bryan brother
@malobeats 2 жыл бұрын
Brotha*
@TomFirth 2 жыл бұрын
@@malobeats least I can do is comment 🤣 great content, every sentence was helpful. Good pacing, funny. No faults, already watched it a couple of times and saved it for later. Cheers again!
@darthknowl9222 2 жыл бұрын
This video answered my questions! Got that alone, you get a “subscription “ Peace!!!
@malobeats 2 жыл бұрын
Thank you for taking the time and sharing your feedback and im glad this was able to help. blessings to you🙏🏼
@tyronethomas820 2 жыл бұрын
🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
@davidscott2095 2 жыл бұрын
Thank you so much for the video, Malo. It was very inspiring, as is your channel. Do you have another video where you do this, meaning adding in different snippets in order to break up the repetitive loop? I was hoping to have seen it here but I guess you ran short on time at the end of the video. Either way, thank you so much for sharing. Blessings!
@malobeats 2 жыл бұрын
Hey David thank you so much for this request I didn’t notice it until I read your comment and it’s definitely a topic to be touched up on on its own video since it is very important. Thank you so much for your support and your input blessings to you brother.
@davidscott2095 2 жыл бұрын
@@malobeats ❤
@KoolteethDeBlog 2 жыл бұрын
Cool, thx for this. I guess I'll stick to your channel!
@KristijanLalic Жыл бұрын
Hi Malo! Thanks for all good videos you put out. I tried to use my old Vestax mixer. But it don't get any sound to the MPC at all, unfortunately. So i tried to go trough my stereoamplifier but the sounds is not great and I can only use the option "Sampling" not Pad sampling or the other ones. So do you have any good recommendations what I could buy so it could work with my turntable? New mixer or is it something else that I can use? Thanks and have a great weekend Malo
@salix5380 2 жыл бұрын
Sampling hold pad function is amaziiiingggg 2.10 is very good
@malobeats 2 жыл бұрын
Indeed it is, are uses feature on every beat
@Rojozproduction 2 жыл бұрын
Waiting on that mastering and mixing video for the MPC ONE! Feel that’s the only thing holding me back from buying!! Dope video and tips nevertheless! 🔥🔥🔥🔥🔥
@PeteOnTheBeat 2 жыл бұрын
It's doable,but not that great. I usually just mess with the volumes and then add a compressor and a maximizer to the master track. I'd love to learn that there are more stuff that we can do
@malobeats 2 жыл бұрын
Thank you so much for this input, well I have been messing around with the MPC hardware in combination with the software on my computer and it’s been very useful when mixing your beats I’m still getting comfortable with the software but I do want to do a video very soon on how you can mix your beats on the software/hardware. I still feel you’ll be a lot more flexible in a DAW like in Ableton or ProTools well you can still do it on the mpc
@NoQualmsTheArtist 2 жыл бұрын
I don't. I transfer the stems into Studio One and mix the same as I do any song. Use the best tools for the job.
@kirkstate 2 жыл бұрын
Explode the tracks and put in a DAW
@crunknavajo 2 жыл бұрын
I have the MPC TOUCH and also the same turntable , numark . How do you set up in prefences to get a clean sound from the turntable to the MPC ? can you do a video ? for some reason i do get playback but its either very low or it really don't sound good to me
@kylen-unixowy 7 ай бұрын
Hi, thx for video, its great :))) i have question Can I safely record dj mix which have over a hour from dj Pioneer into MPC (sd card) ? - it’s stable?
@britox.6216 2 жыл бұрын
Subbed 👌🏽
@malobeats 2 жыл бұрын
Thank you for the support brother really means a lot blessings to you
@mattcero1 11 ай бұрын
Nice! Hey, will this thing sample (grab) directly live from a PC playing music? If I were playing a jam on my computer, could I output the PC audio to this and take samples (grab) of the song being played or do I have to do it via SD card or via the inputs? Thank you.
@cufocufo 2 жыл бұрын
Like everyone else already said, this a is great video, thanks!! One question, do you remember where you got the drum samples from this track? They sound awesome. Thanks again!
@malobeats 2 жыл бұрын
Hey Curtis thank you so much for the feedback and let me get back to you in regards to drum brake are used with this track. If I can get wood samples I used I will let you know
@cufocufo 2 жыл бұрын
@@malobeats it’s all good, don’t go out of your way. I was only curious if you knew off the top of your head. Don’t sweat it though. Thanks very much for the reply and the kick ass video. Take care!
@vinylophil33 2 жыл бұрын
im starting to get the differences of maschine and mpc through youtube. the only familiar experience i have is the app beatmaker 3. I would like to know if you also could easily add different samples to that program from a libraray. f.e. you have the 8 pads from your loop in the video and instead of going on sampling from the record you decide to get a guitar lick from your internal library. Can you easily create your banks flexible in mpcs? cheers and thanks for the vid!!
@malobeats 2 жыл бұрын
Hey brother and thank you for reaching out with this awesome question. To answer your question, YES 👍🏼 absolutely, you can sample in to the mpc and build your program and then latter your can add additional samples to that same program form your SD card or any other source from your sample library
@mrryan7475 2 жыл бұрын
Can i record multiple samples in to a project (as in one instrument at a time, guitar, keys etc)?
@DopamineOverload 2 жыл бұрын
Hey Malo! What do you think of chopping samples in Program Edit / Samples? I prefer this way ALL the time, over Sample Edit view, which EVERYONE else does. Since Program Edit allows you to set sample start / end with the Q-Links (either way), why not just do it all in Program Edit, where there are so many more functions, right there? Never understood why everyone always chooses Sample Edit view.
@malobeats 2 жыл бұрын
Thank you for this, I haven’t really explored editing my samples in the program editor but after reading this message I’m gonna explore that a little bit more. Thank you for dropping by and sharing this
@JavierMartinez-rz4vc 2 жыл бұрын
How I can modify the tunning of a chopped samples but not one by one?
@HowYouMove Жыл бұрын
I have one major question as a beginner does it make a difference if I buy a turntable that has a pitch control or not? I ask because I don’t know if the MPC has a built in pitch control that will let you sample slower then a turntable that has a pitch control?
@digitalkmultimedia 3 ай бұрын
I have an MPC One too. Is the drum kit you used in the factory sounds? Or was the kit from a sample library you could point to here?
@yesman6922 2 жыл бұрын
Can you do a video on how you actually import the vinyl into the MPC and what you need to do so
@malobeats 2 жыл бұрын
Hey brother, I’m just going from the stereo output of the vinyl player into the stereo inputs on the MPC one in regards the connections and plugging in
@yesman6922 2 жыл бұрын
@@malobeats thanks, what’s the actual process like though, what do you have to do
@PHeMoX 2 жыл бұрын
@@yesman6922 You're probably going to need some RCA to 1/4" adapters so you can hook up your turn table directly to the inputs of the MPC One using RCA cables. Or whatever cables you could get that go from RCA to 1/4". At that point, you really just have to press the Sampler button on the MPC One. And press record. It's not difficult. The video here skipped over it, but be sure to press Shift and Convert on the touch screen to actually save the slices or they will be gone.
@klawzilla 2 жыл бұрын
Hey idk if you read comments from old vids but how do I go about sampling a later part of the song on the same program if I'm sampling via drag&dropping mp3 files and chopping in the editor?
@demarcusmatthews3512 Жыл бұрын
What’s the vinyl player called he’s using?
@nadirkarim7573 2 жыл бұрын
Nicee,,,,where you get your mpc one covers from
@malobeats 2 жыл бұрын
Thank you brother, the skin I got it from mpcstuff.com it’s called the retro skin it’s very solid and looks really nice
@xXXShinXtremXXx Жыл бұрын
What record player are you using?
@RosssRoyce 2 жыл бұрын
Am I correct to say that there is no “normalize” for an Audio Track ‘s wave?
@malobeats 2 жыл бұрын
This is a great question and if anybody else reading this knows the answer please let us know. I’m not sure and I would not be able to answer yes or no but when I have a chance I’ll get back in the studio and see if I’m able to normalize audio tracks and get back to you later.
@RosssRoyce 2 жыл бұрын
@@malobeats thanks a lot!!
@Daft_cat Ай бұрын
What song is the sample?
@darb51 Жыл бұрын
What record are you sampling
@Tesko530 3 ай бұрын
When i Chop my sample in Slice Mode and press edit, There is only one shop. What did i wrong? Pls help
@Tesko530 3 ай бұрын
Chop*
@nadirkarim7573 2 жыл бұрын
Where you get your mpc one cover at
@malobeats 2 жыл бұрын
Yes I got that cover from mpcstuff.com it is the retro skin version
@snapshotsreviews4967 2 жыл бұрын
I wish he played the track he was making
@malobeats 2 жыл бұрын
Thank you so much for this request, I just looked back at this video after reading your comments and indeed I wish I did play out that beat. On a future video I would love to recall these beats again. Thank you for taking the time brother.
@salix5380 2 жыл бұрын
Hi Malo. ...you don t normalise your sample
@malobeats 2 жыл бұрын
I hardly normalize my audio when I sample unless I really have to, I’d rather record it with the proper gain structure if possible
@bodypoetry4462 2 жыл бұрын
You talk too much!!! Please stop 🛑
MALO BEATS
Рет қаралды 30 М.
MALO BEATS
Рет қаралды 35 М.
ИРИНА КАЙРАТОВНА
Рет қаралды 1,3 МЛН