Stormworks Updated Advance Jet Engine Tutorial

No video

Stormworks Updated Advance Jet Engine Tutorial

Рет қаралды 52,907

MrNJersey

Күн бұрын

Пікірлер: 77

@notnotstan3746 5 жыл бұрын

Informative Easy to follow This is why your the best stormworks youtuber

@emperorofwarusthundus Жыл бұрын

Srry accidentaly pressed dislike

@peerebeer4507 5 жыл бұрын

I want some more advanced jet engine designs!

@billy-blij-1-2-36 5 жыл бұрын

I think they need to make a jet intake of 5 bocks Wide we only have 3 and 7 wide

@spacebabiesmusic3602 2 жыл бұрын

you know its a good tutorial when it has 0 dislikes

@clickbrickanimations1313 2 жыл бұрын

Im on vaccation i dont even have my pc with me for the next 3 days left. Yet, i still watch theese

@ProWhitaker 5 жыл бұрын

Thanks for the video, and could you do a video on how to make a really fuel efficient, whats the best type of engine, gearbox stacking, diesel vs jetfuel etc for a survival career scenario boat. Thanks

@Epic_DaVinci 5 жыл бұрын

I wonder if using multiple compressors connected in a T junction or in series would increase the pressure in the combustion chamber?

@blueto16 5 жыл бұрын

I have to say: that's a nice hovercraft right there!

@xxSWxxNINJA 5 жыл бұрын

A constant on PID will cause trouble if your engines are off for a while before you start them. The PID seems to create phantom signals that result in the turbine wrecking itself before the throttle has chance to adjust. I know this from experience with my three turbine MH53, I ended up giving each turbine it's own PID and power on only when fuel pumps are active and the turbine is turning.

@guywholikesplanes 5 жыл бұрын

The large intake is for double flux engines. It should generate thrust like a propeller(haven't tested it yet)

@Bendigo1 2 жыл бұрын

A better PID setting is P 0.5, I 0.00001, D 0.001, it will be much more responsive and allows the engine to reduce throttle. You can also use a clamp frim the PID to the throttle with a minimum value of 0.000001 and max of 0.99 to keep the engine from spooling up out of control.

@Oldmandoom95 5 жыл бұрын

Helpful as always, well done good sir!

@pellethrane2940 5 жыл бұрын

Love ur vids keep up the good work. Please make more ship building series😊❤️

@kacpermakowski9395 Жыл бұрын

best tutorial

@angrypatriot9989 5 жыл бұрын

Please make a power generator using a jet engine, preferably smaller, as efficient as possible and fast

@joshuacurtis3860 5 жыл бұрын

I would like to see you do something like frantic does which is a competition but for other vehicles other than planes and then review the top ones and give a winner Hope you go ahead with this idea👍👍👍👍👍👍👍👍

@kennedy796 5 жыл бұрын

So in theory you could use a turbine to spin the rotor and if you wanted an extra speed boost you could use the rotating exhaust to output thrust as well?

@SopChoppyCopy 2 жыл бұрын

Nice

@streamlin 5 жыл бұрын

Very good tuts as usual jersey:)

@elmainer3638 5 жыл бұрын

Hello I want a full tutorial on how to build full auto drive in a ship I have watched your old video but I want to see it being built from 0 to 100 because I don't have access to steam Thanks And keep up amazing channel

@ulkergencer6202 4 жыл бұрын

Thank you , it helped me a lot of

@thorgeirnable 2 жыл бұрын

Good looking engine. Pretty simple it seems. One question, how is the fuel efficiency?

@jocking3 3 жыл бұрын

How can you manage the spoiler level? My issue is that if I apply even a small amount of thrust, my heli will start rolling forwards and crash.

@TaronTT 2 жыл бұрын

What this fails to explain is how to actually *use* the large intake. I see no transition piece, so how does one do it?

@Megalodon34561 2 жыл бұрын

i put the fuel on jet fuel and attached it to the combustion chamber but when ever i start the engine it never catches and when i put my mouse over it it reads no fuel going in

@lasse8326 5 жыл бұрын

plz do a paintable sign tutorial

@billy-blij-1-2-36 5 жыл бұрын

For my new plane i used a electric motor for starting

@lk846 5 жыл бұрын

Can you make a advanced altitide hold system tutorial, please?

@TotallyNotAFox 2 жыл бұрын

I can't seem to get the intake spinning with more than 0.75 RPM :/

@jaspersgames4094 5 жыл бұрын

make a totorial how to make a bigger/powerfuller jet engine

@masterenos 4 жыл бұрын

Id like to see how to build a turbine engine for powering a ship

@ballistexx7864 5 жыл бұрын

Yessss second like!!!

@user-qf4gx1jv1e 2 жыл бұрын

What do I put in the max value in the pid?

@mala7794 5 жыл бұрын

mine just spools up then as i give it thrust i cant make it go own and it just turns off

@goproskiing_kid619 2 жыл бұрын

Does the thrust spoiler from the exhaust is controlled by the throttle from the combustion chamber or does it have to be controlled from a seperate throttle lever?

@thatoneguy611 4 жыл бұрын

I forgot to set the setting on the PID, and it kept shutting the engine down when I passed 160rps

@joy_0109 4 жыл бұрын

How to build shorter jet engines? You mentioned. Can it still be done?

@MrAlastairwylie 4 жыл бұрын

When i start the engine all is normal but the engine refuses to stop for some odd reason

@lantosadamlevai496 5 жыл бұрын

So what about the tutorial of a jet enginded helicopter. Mine doesn't working :( Oh and you videos are so helpful

@BigDaz 5 жыл бұрын

Do you know if multiple compressors compress it more?

@krystianl9459 4 жыл бұрын

and it can be stopped or something or do you need a hook for something?

@deltavii7499 4 жыл бұрын

What is the helicopter?

@mikaxms 5 жыл бұрын

Isn't this video a re-upload?

@poraljoshuas1528 4 жыл бұрын

so please help me im making a jet i get all your explanation and all but what can i put other than the propeller for my jet pls help

@MrNJersey 4 жыл бұрын

Join my discord, ask around, plenty people more than happy to help.

@bobgoat5994 3 жыл бұрын

I set mine up exactly like yours except that I used ducts and put multiple turbines. I'm having an issue however, when I try to throttle down the engines, they will not decrease in rps. Max throttle in second gear of my ship they will be at 74rps, but when I Bring the throttle down to 20 from 180 they will not slow down.

@attilavs2 2 жыл бұрын

Might be a pid issue

@Bendigo1 2 жыл бұрын

the pid settings do not let the engine throttle down if its over 60ish rps.

@xxjuycedxx6650 5 жыл бұрын

@MrNJersey can you make a guide how to build a Range specification view ? :)

@MrNJersey 5 жыл бұрын

Can you elaborate

@xxjuycedxx6650 5 жыл бұрын

@@MrNJersey i tried to build a system wich can Show me how far i can Drive with my boat by the actual use of fuel it needs. Hope Its better now. Thank you :)

@fireflywater 3 жыл бұрын

So Jet Turbines, compared to Diesel Engines, need no cooling, no exhaust, and are degrees more powerful? Just an air intake and whatever you want to drive? What's the catch?

@MrNJersey 3 жыл бұрын

Consume a lot of fuel.

@fireflywater 3 жыл бұрын

@@MrNJersey I have to respectfully disagree. Well, at least for Turboshafts. I made a medium-small turboshaft boat powered by 1Jet Engine and 3 Fluid Jets. At max efficiency, it hits 11.45 RPS, ~60 Knots, ~2.0L/s, and with a fuel capacity of 5000 Liters. I'm new to the game, but I think that's pretty impressive. After using them, I'd say their catch is unresponsive RPS. To prevent extreme acceleration, I'm using the Clutch, Fluid Jet deflectors, AND the Target RPS for multiple methods of thrust control. By the way, the PID is set to 0.1, 0, 0.1, 1. It prevents the engine from overrevving above target RPS. ... ... I can't say anything about using a Jet as a Jet, though.

@secretgaming5739 4 жыл бұрын

Any idea how to reduce the consumption for helicopters like it eats fuel too fast.

@MrNJersey 4 жыл бұрын

Lower RPS and Higher Gear Ratios

@henryscp318 5 жыл бұрын

wait there was already a jet engine tutorial or?

@aeco5973 3 жыл бұрын

Isnt working for me

@alflurin 5 жыл бұрын

For some odd reason, none of my ship's engine work. They're built in advanced mode or update to work that way and when the limited fuel patch came out, I added a fuel inlet. It shows air fuel and exhaust as 100% and when I add fuel and try to start it, it all goes 0%. Now, it worked before so I would be really thankful if anyone has any tips for me. Cheers

@tomkamin2676 5 жыл бұрын

Your throttle is set at 0%. Thats why it shows 0.

@alflurin 5 жыл бұрын

@@tomkamin2676 That would be a possible cause but no, throttle is set to 0.20 although the microcontroller that controls everything might have errors and provoke that. Thanks for tip.

@fredmilne1819 5 жыл бұрын

Do it Hacks

@louis7459 5 жыл бұрын

What’s the hotkey for erase?

@MrNJersey 5 жыл бұрын

@louis7459 5 жыл бұрын

Thx gonna save me a lot of time

@Derpy-qg9hn 4 жыл бұрын

Engine fails to start up. -From front to back: intake, compressor, combustion chamber, small turbine, duct, exhaust, all arrows pointing backward -Fuel tank (with jet fuel) is connected directly on top of combustion chamber -Compressor has medium battery hooked up to it, and only it -Separate battery powers a push button and throttle; button is connected to compressor's red input and nothing else -Throttle itself spawns at 0.5 -Spawning in the map's arctic regions I hold the button for well over 10 seconds; an RPS monitor reading the intake's RPS goes up to 000.84, and never any higher, beginning to drop after holding the ignition down for long enough.

@LandscapeAhoy129 4 жыл бұрын

Derpy 1109 Do you really expect anyone to go out of their way and diagnose what you did wrong based on your terrible explanation of your system? The engines work just fine, you simply set it up wrong. Easy.

@Mathathat 5 жыл бұрын

Yessss 27th

@toddjamessusag 5 жыл бұрын

jet engines don't run of of diesel MrNJersy, ~b00ys (luvherbie)

@henryscp318 5 жыл бұрын

240 Aufrufe 32 likes no dislikes respect

@abysswalker2403 5 жыл бұрын

we need a supercar engine

@jakubpollak2067 5 жыл бұрын

Whole engine have same rps, or not? So why connecting it to generator at 9:10?

@doomdave475 5 жыл бұрын

what generator are you talking about ??

@jakubpollak2067 5 жыл бұрын

@@doomdave475 sorry actual module is called JET TURBINE MEDIUM, why connect RPS directly to it? does it matter? whole engine turn at same RPS so I cna connect it to any RPS output, cannot I?

@doomdave475 5 жыл бұрын

Are you talking about the PID? Because then its because the only throttle options on the jet are on and off so the PID is needed to precisely flicker that throttle lever so the rps is constant