Great Video, I have always wondered how to install a 2 step! it blows my mind that you don't have way more subs and views, You have a GREAT channel!
@slow_restoration4 жыл бұрын
Thanks, it takes time! Thanks for watching!
@davidgriffiths58974 жыл бұрын
at the beginning of the video: oh no hes trapped in the fish bowl hehe
@chrissexton66975 жыл бұрын
Looks pretty easy to do bro thanks!
@slow_restoration5 жыл бұрын
extremely easy!
@rubendaboyy18674 жыл бұрын
what did the wire look like when you connected the triggered wire to the powered break wire?
@timh11875 жыл бұрын
Sounded like you ran the 2 step at the call out.
@slow_restoration5 жыл бұрын
I did, should have turned up the RPM a little it's at 2,800. This install was filmed before the call out.
@akp4111 ай бұрын
Thanks for the video
@slow_restoration11 ай бұрын
Thanks for watching!
@DirtyBird01 Жыл бұрын
You would use the blue and white wire for a 12v momentary button? my 12v button has a single black cable does the blue and white wire connect to this wire?
@gabeserson25432 жыл бұрын
Did you have the factory exhaust on?
@senditsteve82065 жыл бұрын
c5 next?
@slow_restoration5 жыл бұрын
Bring it on down!
@joebarz43812 жыл бұрын
Soooo I can swing it while this is turned on ?
@PABLORL19894 жыл бұрын
If you have a stall rated at 3000rpm and 2 step at 3500rpm, will it 2 step at the stall rpm or setting on the box?
@slow_restoration4 жыл бұрын
It won't hit the 2 step until it hits the set RPM on the box, assuming it has enough power to get there with the brakes applied. You would normally set the 2 step under the stall speed.
@BrandonGarcia-lv7ut4 жыл бұрын
So does the 2 step lets go at the same time you let go of the brake pedal ? If so, where did you connect the power wire to? Or do you have to turn it off with the switch?
@slow_restoration4 жыл бұрын
Once it's armed with the switch, the brake switch activates it. When you let off the brake it disengages it.
@1rdzdslim4 жыл бұрын
Brandon Garcia did you ever figure out the wiring? Just got mine only problem I’m having is wiring it up
@UNEEK_LOGIK3 жыл бұрын
How did you run the wiring from switch & brake pedal.? What circuits .? Thanks
@slow_restoration3 жыл бұрын
I see you found the update video! Thanks for watching
@Legendary_Frank6 ай бұрын
Is there a way to put the activation switch on the voice button on the steering wheel
@evelynjorge33825 жыл бұрын
Do you need to have big upgrades ? To get 2 step like cam or turbo or supercharger ?or can I do it on a truck with headers full cat back and CAI ?
@slow_restoration5 жыл бұрын
Not at all, you could put it on a stock truck! Easy install too!
@DatHondaBoi2235 жыл бұрын
slow_restoration does it make the truck backfire? i have a 5.3 it’s got long tube headers, and a y pipe straight pipe
@shawnsmith98254 жыл бұрын
I’ve been lookin for this 2 step for ever could u leave a link to where
Will this have similar results on a stock 4.8? Do you need any mods to install this? If so which?
@slow_restoration3 жыл бұрын
Yes it will work on any LS and no mods! Just install it and you're good to go!
@dirtymike40535 жыл бұрын
You got any pics or anything i can get of what or how you wired it to the powerside to the switch?
@slow_restoration5 жыл бұрын
I don't have anything, I can see what I can do.
@dirtymike40535 жыл бұрын
I just wanna know what cable he connected the blue cable to and where at?
@Kevin_Yagoonie4 жыл бұрын
Looks easy but I don't understand how you hook it up to the brake pedal and the switch. And where do them two wires go to coming off the 2 step box?
@slow_restoration4 жыл бұрын
We are doing another build and installing the same 2 step. I will remake the video and try to be more specific! Stay tuned.
@Kevin_Yagoonie4 жыл бұрын
@@slow_restoration awesome thanks
@blakebrewtnall11524 жыл бұрын
Yep I just ordered one this is how I want to set up mine so keen to see exactly how you did it just subscribed 👍
@ETxKILLSx4 жыл бұрын
Will this fit on a 1999 Chevy Silverado ?
@slow_restoration4 жыл бұрын
As long as it's a v8, yes.
@carterscars4 жыл бұрын
How do you set the RPM of the 2 step?
@slow_restoration4 жыл бұрын
There is two dials on it that you turn to set RPM.
@whem. Жыл бұрын
I’m confused about the boost part isn’t that a n/a motor
@slow_restoration Жыл бұрын
It was on it's way to boost. It was built in steps.
@brentfs3 жыл бұрын
What do you run the blue wire to
@daltonhicks99113 жыл бұрын
It optional you can run the 2 step to a ground for the solid blue wire and the white with blue line goes to a 12 v or like he did with a break in the middle like a toggle switch if you run the 12 v wire you just let the blue hang DO NOT HOOK BOTH hope this helps
@brentfs3 жыл бұрын
Yeah man I took it to my mechanic he installed it to a switch I toggle of an on but I can’t use it for launch control still trying to figure that out
@phuk_yall Жыл бұрын
Is this bad for the engine?
@slow_restoration Жыл бұрын
It's not.
@apollotwins66062 жыл бұрын
Can you install this into any vehicle?
@slow_restoration2 жыл бұрын
Any with a LS!
@apollotwins66062 жыл бұрын
@@slow_restoration I see. What about a Toyota 2005 tundra 4.7L?
@bourbon65865 жыл бұрын
Am I able to do this to my 2012 Dodge Ram 1500? It’s a automatic 5.7
@slow_restoration5 жыл бұрын
Absolutely!
@bourbon65865 жыл бұрын
slow_restoration what brand of 2 step should I use? Because I can’t find one that is for my year 5.7, any help? Maybe your better on searching these type of things
@bourbon65865 жыл бұрын
slow_restoration also, what’s the thing that when you press your brake pedal it turns yellow?
@Jamesrdc2 жыл бұрын
4l60 still?
@slow_restoration2 жыл бұрын
2500 HD it has a 4L80E factory.
@Jamesrdc2 жыл бұрын
@@slow_restoration sick bro. Haha didn’t pay attention to the door.