MSFS | BRAVO TQ CONFIGURATION GUIDE | TWIN OTTER & KODIAK 100

MSFS | BRAVO TQ CONFIGURATION GUIDE | TWIN OTTER & KODIAK 100 | Suitable for most Turbo Props

Рет қаралды 13,511

Күн бұрын

Another configuration guide for the Honeycomb Aeronautical Bravo Throttle Quadrant. Focus is on Turbo Prop Aircraft, with a step by step guide for the Aerosoft Twin Otter and the SWS Kodiak 100. Designed for those simmers that want something as close to the real aircraft as possible.
REFERENCED LINKS
Aerosoft Twin Otter: www.aerosoft.com/en/microsoft...
SWS Kodiak 100: orbxdirect.com/partner/simwor...
Simhanger Kodiak 100 config video: • MSFS | KODIAK 100 Conf...
Honeycomb Aeronautical: flyhoneycomb.com/
CHAPTERS
00:00 Intro
00:25 Kodiak 100
9:00 Twin Otter
16:18 Key Bindings
SIMHANGER KZfaq Channel Link: / simhangerflightsimulation
Join Simhanger on Discord: YOUR DISCORD INVITE: / discord
For more details visit Simhanger Website: www.simhanger.com
Connect with me on Facebook, Instagram and Twitter: @Simhanger1
✈ Would you like to support the Simhanger Channel? You can donate here: www.paypal.com/paypalme/simha...
You could also buy me a coffee here : www.buymeacoffee.com/SIMHANGER
Looking for help with MSFS, then check out my HOW TO GUIDES, link to playlist here: • MSFS HOW TO GUIDE
MSFS on Xbox playlist can be found here: • MSFS on XBOX
Thanks for watching
#xbox #microsoftflightsimulator #virtualreality #msfs #vr #cloudgaming

Пікірлер: 121

@SimHangerFS 2 жыл бұрын

Get your Kodiak and Twin Otter into the air with realistic throttle quad settings!

@transair27 2 жыл бұрын

thanks Mark. I had a previous config which was nowhere near as good as yours for the DHC6.

@MTN_Photographs 2 жыл бұрын

You have done so much for my Flight Simulator experience over the last 12 months. I don't think I would have ever figured the configurations out for the BRAVO throttle without all of your videos. Thank you so much mate.

@jerryrivera4298 2 ай бұрын

My man! You have saved me from further elongating the already 2 hours long journey into finding a solution for the feathering with the Bravo. GOD BLESS YOUR SOUL. ❤🎉

@lwooden100 2 жыл бұрын

I don't know how you are able to figure these things out, but you are the best at it. Thanks so much for sharing!

@hwoods01 8 күн бұрын

A huge THANK YOU for this vid.. Was having all kinds of trouble setting up my controller.

@robertpelland5649 4 ай бұрын

You sir , are a gentleman and very gracious with your time, thank you.

@Mr.Martini549 2 жыл бұрын

The service you provide with Honeycomb configuring is immensely invaluable! HC does little to help out its customers with useable content such as yours. Keep up the great work Mark!

@MrSschrotti 9 ай бұрын

Great! The idea is the double binding on switches! So many thanks for this instruction!

@265petsar 2 жыл бұрын

Your videos are amazing, I wish you could help me. I am 69 disabled and have love everything flight sim since I first used a so called flight sim on a Sinclair Spectrum in the early eighties. My family bought me a Thrustmaster Hotas Warthog stick and throttle when MFS was released, but I'm very confused how to set it up with MFS 2020. If you could make a video showing how to setup these controls , it would make my flying so much more enjoyable. If not I would like to thank you for all the hard work you put into making the videos, for all to enjoy. God bless Mark and take care. John ( UK ).

@rcj4046 Жыл бұрын

This is so VERY helpful! I cannot thank you enough. I spent a few hours yesterday fighting with this, but I should have known to check here first. Thanks, yet again, for another lesson that I've benefited from.

@portlandtwowheels1872 2 жыл бұрын

Wow. Thank you so much for this. I was having trouble figuring out the condition lever issue and cutting out the fuel. Thank you!

@Simbuilds-ud2kn 19 күн бұрын

microsoft should pay you for your videos. thank you

@liortaylor5305 2 жыл бұрын

you are a god send Mark. Thank you!

@eska_tv 9 ай бұрын

Even with my Saitec Throttle Quadrant, your video helped me a lot, cause it works the same! I saved the Link to your video for when I get my Bravo Quadrant. Thanx a lot, Mark, I am a big Fan of your Channel!

@Tabfren 2 жыл бұрын

This also fixes the Milviz PC-6 Porter, brilliant work, not all hero's wear capes!

@doswelk 2 ай бұрын

Thankyou excellent guide, had some fun with the props not unfeathering but that was a failure to clear button 28 from the mixture settings, d'oh!

@hardware1197 Жыл бұрын

Mark - got the Kodiak for short field work and was basically at my wits end with being unable to reliably reverse the prop.....My control profile was a disaster from trial and error and I was ready to start trying JetSki or pogostick simming or something until I ran across your tutorial. The updates to the Kodiak from SimWorks and this tutorial have been spot on making this plane challenging but predictable and this plane has a personality!......I am using the Logitech TQ and this was still very relevant.

@CMACJAZZ 2 жыл бұрын

Thanks Mark, I’ll give it a go when time allows -great job BR Charlie

@alancaldwell8192 Жыл бұрын

Thanks very much for taking the time to explain this, very much appreciated.

@renefeijen5916 Жыл бұрын

Great instructions, would never have been able to configure my Bravo the right way for the Kodiak!

@tommysecondspace6977 Жыл бұрын

Still extremely usefull!!!! Thank you for the configuration. Works perfect.

@rexjaneway186 2 жыл бұрын

Very useful video thanks Mark great videos very helpful and kind as always. Keep up the good work mate.

@ramarrie Жыл бұрын

Finally I got the right settings for the C208, thank you very much, you really do good for the community.

@Voltomess Жыл бұрын

Amazing I bought my Kodiak yesterday you are WONDERFUL!!!

@thekorben 2 жыл бұрын

This works perfectly, thank you so much. Also works great for the MilViz PC-6. :)

@stmarch8359 2 жыл бұрын

THANK YOU MARK FROM FRANCE; you re a great help for the community

@georgesiebes 2 жыл бұрын

This works very well, highly recommended.

@tonyvelupillai2728 2 жыл бұрын

Excellent tutorial on how to configure the Power Management settings for the Kodiak and Twin Otter. I had attempted a setup myself on both but could not get the Feathering to work. Now it does. Thank you.

@olddogg60 2 жыл бұрын

Thank you. This beats my configuration. 👍

@mikevadnais7722 Жыл бұрын

Have the Bravo arriving tomorrow, but I thought for fun I would try your settings on my Logitech throttle quadrant. I am happy to say they worked perfectly. I no longer have to use my mouse wheel to put the prop in feather position. Really appreciate the level of detail you provide. Thank you again

@Hongthreei 2 жыл бұрын

Thank you so much, Now I can control my condition lever, not mixture! :)

@commentingpausedtoprotectus Жыл бұрын

Fantastic settings!

@SparkySven 2 жыл бұрын

I found what made my fuel cut off not work anymore after SU8. That sensitivity extremity dead zone 20% was reset. Great video. I bookmarked it to keep 4 ever if something does not work anymore. Sim Update reset the Bravo default profile also with SU8 so middle row switches where in conflict again with the bottom left switches on the Alpha and also on Bravo again the switch button 47 / 46 where turning Avionics on and off again. MS / Asobo never thinks about peeps owning both end up with huge mapped binding conflicts if you own Alpha and Bravo. Everything is working and better with the not jumping prop so big thanks.

@SparkySven 2 жыл бұрын

Thanks Mark. I can get those two planes up & running with my Bravo. Too bad Aerosoft does not show the feathers props animation like the Kodiak does.

@JohnCinOz1 Жыл бұрын

Thanks once again Mark, for a super helpful tutorial. I found I needed to use the Propeller 1 Pitch Hi for the Twin Otter as well as the Kodiak. Without that setting, the prop lever in the Twin Otter jumped forward when coming out of feather. With Propeller 1 Pitch Hi applied to Button 26 it works perfectly. Perhaps due to Aerosoft DHC-6 update Version 1.0.6.0 which is my version? Anyway, all good now. Many thanks, John

@iFlyIt Жыл бұрын

Please help! The condition lever in Caravan will not stop going to cuttoff position before reaching or entering detent. I have tried many extremity dead zone sensitivity settings. Even tried deleting all bravo profiles and starting from scratch. What am I missing???

@Ralf71 Жыл бұрын

Sooo many THANKS!!!!!!!!

@edwarddoloughty3268 3 ай бұрын

Thank you!

@flybeeson7950 2 жыл бұрын

Thanks very much Mark for revisiting the power management settings for the Kodiak (which as you say will apply to other planes with reverse thrust as well). (I used the settings in your 4th December 2021 video for the V1F Controller). I tried to apply your new Bravo settings in this video to the V1F Controller and the Throttle and Prop settings worked fine - I'm getting reverse thrust and prop feathering perfectly. However for some reason I couldn't get the Condition Lever settings to work at all. The V1F Lever detent position didn't take the planes' lever into cut off. I have ended up deleting both the recommended Condition Lever Axis Cut Off and the Decrease Condition Lever 1 settings and instead have set "Neutral" on the Sensitivity of Joystick L Axis 6 to -(minus) 100%. That was the only way I could stop the lever going into the Cut-Off position below about the 50% position on the V1F Lever. If you get a chance could you please have a look at it and see what you think. I would be most grateful for your opinion.

@Salty_Sambo Жыл бұрын

Hi, not sure if you were able to resolve this. I was having the same problem and the only work around I found was to create a separate profile for the Kodiak without Mixture axis mapping. It appears Mixture interferes with Condition settings. I also changed the bravo levers to match that of Mark.

@johnf6545 Жыл бұрын

Hi Mark, thanks for all the help you give us bravo users! I applied these settings to the King Air 350i and got everything working perfectly except the condition lever cutoff. Can't seem to get them into cutoff no matter what I try, not sure if you have any ideas, cheers.

@sascenturion 2 жыл бұрын

Awesome stuff and like someone mentioned in the comments ... " how on earth you figure out all this stuff! " 😳😀👍 Thanks again

@SimHangerFS 2 жыл бұрын

Trial and error…plus a few beers 😂

@sascenturion 2 жыл бұрын

@@SimHangerFS 😂👍

@havekidswillafk Жыл бұрын

you absolute legend, throttle, prop and condition lever settings also work on the saitek/logitech throttle quadrants,

@Topcat1952 2 жыл бұрын

As others have said below, your instructions are extremely helpful. I have the Bravo as well and will be adjusting it for my turboprops today. One question: Did you happen to do one of these for the TBM930? I thought I remembered seeing one but not sure it was yours. If you did, would you provide a link? If not, it would sure be helpful since this airplane has a different set-up (no condition or prop levers) than the other single-engine turboprops. Thanks!

@SimHangerFS 2 жыл бұрын

kzfaq.info/get/bejne/g9CfqaeV2svFln0.html

@Big_Sierra 3 ай бұрын

Great! Thank you, sir. No way to map the emergency throttle?

@calinutza33 10 ай бұрын

Amazing , thank you ! 😮 Have you got any tutorials for the Alpha yoke lights mapping ? Thank you. !

@SimHangerFS 10 ай бұрын

They are not configurable unfortunately. Maybe with SpadNext.

@CMACJAZZ Жыл бұрын

Hello Mark, Been reviewing your excellent series of Bravo TQ configuration tutorials, do these config profiles that are created only work with default aircraft, I am thinking of the Black Square range of aircraft. Thanks so much for the tutorials.

@SimHangerFS Жыл бұрын

My profiles will work with any aircraft that uses a standard binding config. Kodiak 100 etc. Where it will not work is where the dev has used non-standard simconnect calls for functions.

@georgesiebes 2 жыл бұрын

Thanks, as always. Quick check, the throttle adjustment was set to on-press, as opposed to the fix for the prop?

@SimHangerFS 2 жыл бұрын

Yes - on press

@bourdil98 2 жыл бұрын

Thanks again for this great tutorial!! Did you find a solution to configure the propeller of the Skymaster?

@SimHangerFS 2 жыл бұрын

No, I don’t have this aircraft.

@GumperVanLier 2 жыл бұрын

Your videos are very informative. I use the VelocityOne which I watched your videos on that. The Kodiak is difficult to fly and needs an update. The trim is at minus 38 on take off most of the time and you can loose control of it quickly as it will flip over. The Velocity is quirky and when you touch the trim wheel, it bounces to -1 or 0 which causes the plane to go erratic. Then on landing, the plane will nose dive when autopilot is disengaged. I've learned a workaround by engaging autopilot soon after takeoff, let the trim wheel adjust, and then disengage autopilot. Upon landing, I disengage autopilot sooner to get the plane under control when it nose dives. The Caravan 208B, especially with the mod, is a better plane. Also, the plane will crash if you accidently open the window. Although a pretty plane with many models and liveries, needs an update.

@SimHangerFS 2 жыл бұрын

Check you have the pilot assist settings off in the assistance options menu.

@GumperVanLier 2 жыл бұрын

@@SimHangerFS Okay. I will check for that. Thank you.

@GumperVanLier 2 жыл бұрын

Finally, the Kodiak got updated today (PC). It flies and behaves much better now. Very impressed.

@maxborgen5131 5 ай бұрын

Thanks!

@SimHangerFS 5 ай бұрын

Really appreciate your support of the channel. 👍 Thank you.

@sarathab Жыл бұрын

Thanks Mark for your series of videos on the Bravo. confused a bit about the Condition lever vs the Mixture lever. Are they the same or two different things, if so , what is the difference please?

@SimHangerFS Жыл бұрын

Basically the same function, a Condition Lever is typically found on turbo probs, such as Caravan and TBM 930. Rather than be variable as is the case with Mixture (GA) they usually have preset positions…fuel off…low idle….high etc.

@sarathab Жыл бұрын

@@SimHangerFS Thanks Mark

@robertoazzolina8176 Жыл бұрын

Thx for your informative work. I read a lot of stuff on this topic, but I noticed that you, only one among who did that, dont use the vars TOGGLE FEATHER SWITCH 1 e 2. Did you tested with not favourable results?

@SimHangerFS Жыл бұрын

I found response erratic

@robertoazzolina8176 Жыл бұрын

@@SimHangerFS I am talking about King Air 350 with which I still have troubles when I feather ONE engine on air ...

@nemysisretrogaming3771 2 жыл бұрын

I have had my bravo for just over six months and the toga buttons on certain axes stopped working. I contacted honeycomb and it appears that there are some units out there with wiring faults, specifically the wiring that connects the axis to main board of the unit is not firmly connected to the axis levers and over time from using the throttle the thin wires just break. So I am now sending it back for RMA and getting it fixed/replaced. Just thought I would share this info for any other bravo users out there.

@jeffreytlynch 2 жыл бұрын

Please add the same for the Velocity One. Especially sensitivities.

@SparkySven 2 жыл бұрын

That sensitivity extremity dead zone 20% is a global setting and must be set every time you switch from Kokiak to Twotter! That's something you should have mentions or that is what changed and was not so before SU8?

@bobbob8765 Жыл бұрын

Hi, Very helpful video as always. This configuration works on the caravan apart from the fuel cutoff detent but does cutoff at lower end of the axis. My issue is that I am unable to get the condition lever to move at all in the Pilatus Porter, The throttle and prop work as they should. I have tried these settings plus just using the same but the general condition lever selections and no response from lever. Your TBM setup also works great. Any ideas? Thanks for your great work here. 👍

@SimHangerFS Жыл бұрын

The Pilates condition lever not moving is a sim fault. Awaiting fix from Asobo

@bobbob8765 Жыл бұрын

@@SimHangerFS Thanks for the reply, may just have to add the Kodiak to the stable in the meantime 😀

@rodwright3271 9 ай бұрын

Can you please help me ! I am trying to config the THROTTLES for a twin Baron . The No1 and No2 levers only work like a SWITCH to 50% and from then on linear. I have spent hours trying to change this but no luck. With the settings like this taxing is almost impossible so I have resorted to using no 3 and no 4 for the throttles and they work fine. In the configuration box the MODE can be set to either Airbus or Boeing ???? This is being used for msfs2020.

@77flyer Жыл бұрын

Hello! I think I watch most of your videos by now and thanks for all you do. I got everything setup like u for the kodiak but I still get a very aggressive takeoff roll on the kodiak and other small planes. What can I do, i played with the sensitivity but looks like is not working. Thanks for any help

@SimHangerFS Жыл бұрын

Set your aileron trim before take off this has an aggressive pull at high throttle.

@MrSschrotti 8 ай бұрын

hi, any ideo how to adapt to the Porter Pilatus Paware? at the moment, the single prop configuratio works not with the fuel. no movement, no cutoff. i hav to pla with it...

@renefeijen5916 Жыл бұрын

Mark, it seems like the sensitivity for the throttle has to be changed again with the latest hotfix for the Kodiak? I now have extremity deadzone to 0% again to get it in the beta range. Probably 19% still for other single engine turboprops?

@SimHangerFS Жыл бұрын

Yeah…I wish they would stop changing everything! 🤣

@BtcSimmer Жыл бұрын

i follow this for twin otter however when i come out of reverse prop the lever in sim shoots right to full? any idea if i did something wrong?

@pascal-ht4xp Жыл бұрын

When starting the engine on the milviz PC-6 my ITT stays in the lowest end, but this only seems to be the case when the condition lever axis is assigned... When I clear it and leave it unassigned/use the mouse it works fine and ITT raises as it should? Can someone help me out here lol?

@micgrech 2 жыл бұрын

Thank you for the video and fixing my problems with the throttle quadrant on the bravo and Kodiak. One question. Can you tell me how to map the landing lights to the alpha. Its the only light switch that I can not get to work.

@SimHangerFS 2 жыл бұрын

It’s not configurable…it uses an Lvar.

@SVS96DAN 2 жыл бұрын

Thanks Mark for this great tutorial. Do you know if i can use thoses set up if i buyed my Kodiak 100 and my Twin Otter from Aerosoft and SWS (Simworks studios) directly ? Thanks

@SimHangerFS 2 жыл бұрын

Yes you can. I did.

@SVS96DAN 2 жыл бұрын

@@SimHangerFS Thanks i will try it

@jmskelly59 2 жыл бұрын

Thanks for posting Mark! Would this setp also work for the Asobo PC6?

@SimHangerFS 2 жыл бұрын

Yes it does, except the condition lever. In the PC6 it is broken 😞

@jmskelly59 2 жыл бұрын

@@SimHangerFS Thanks for the prompt reply. Hopefully Asobo will sort it in a future update. It feels like a half finished aircraft. Keep up the amazing work!

@hardware1197 Жыл бұрын

Hey Mark - Since SU12 I cannot get the landing lights to work at all in the Kodiak Have you noticed this?

@dagsy07 2 жыл бұрын

I'm using the SU9 beta and can't get the mixture cut or prop to feather

@seanpinnell4806 Жыл бұрын

Do you know if the TWIN OTTER will come out for us lowly Xbox simmers? Thanks for these amazing videos!

@SimHangerFS Жыл бұрын

Pending WASM implementation…late March 2023…so I would guess the T.OTTER will be available sometime in April or May.

@MrBillpam91 2 жыл бұрын

I dont have the Kodiak and the cutoff for extreme dead is not working on the Caravan.

@mikecoster2709 Жыл бұрын

How do you configure the power lever to utilize the beta range as well, instead of just reverse?

@SimHangerFS Жыл бұрын

I couldn’t config for that. No options avail.

@KEFVatsimTower Жыл бұрын

Would the same settings work for the the V1F throttle quadrant? I.e. the same settings for the axis and detent buttons?

@SimHangerFS Жыл бұрын

Yes it would 👍

@KEFVatsimTower Жыл бұрын

@@SimHangerFS thank god! live savior. straight home I go to update my V1F

@CrucialParadox Жыл бұрын

I’m lost, I follow the instructions but my condition lever ALWAYS goes to cutoff before entering detent. Please help!

@SimHangerFS Жыл бұрын

Check the instructions on an adjustment to solve this starting at time 06:51

@SparkySven 2 жыл бұрын

Mark. I’m at a loss how to feather the twin props of the new Flysimware Cessna 414AW Chancellor. The twin otter profile does not work with super best ga plane

@SimHangerFS 2 жыл бұрын

Hey, how you doing! I haven’t got this aircraft yet….so not sure!

@SparkySven 2 жыл бұрын

@@SimHangerFS it does work but not perfect. It's still in beta so I'll give the devs feedback of the bugs so hopefully it gets fixed before release. It's an insane study level ga twin Prop aircraft.

@SimHangerFS 2 жыл бұрын

@@SparkySven damn…another one for my hanger!

@SparkySven 2 жыл бұрын

@@SimHangerFS I made a BUG compilation video just know showing all the issues and with reference to your Throttle setup video. I'll use this video on their support to show what needs to be fixed. Strangely no other reviewer showed these bugs yet. Can't fix what you don't show ;-) you will love this plane a lot I'm sure! kzfaq.info/get/bejne/fJ6Vdadiyd7RYZ8.html

@Chucklesrailarchive 8 ай бұрын

Where is the manual for all this? Newby not even got anything out of the boxes yet! 😊

@mikecoffee100 Жыл бұрын

I do Hope The Honey Comb Alpha Bravo Throttle Quadrant works with MSFS 2020 SU 11 me Logictech single Throttle Quadrant has gone wrong so time to go for the whole thing and Get the Alpha Bravo Quadrant

@SimHangerFS Жыл бұрын

Yes it works, but the lights on the bravo autopilot are usually not on.

@mikecoffee100 Жыл бұрын

@@SimHangerFS ok and of course now I can watch your previous videos and how to set it up ohh I can't wait though here in Canada it cost a few quid if ynow what I mean. and Thank You :)

@Voltomess Жыл бұрын

Everything was wotking fine until the last update now my kodiak throttle act weird ( not always but sometimes ) when I line up for take-off and move the throttle up in the middle of the runway he moves throttle lever to idle and nothing can be done and lever become unresponsive. it works perfectly fine when the aircraft is OFF and works fine during the taxi but as soon as I put the power above 50% she moves back to idle idk wth is going on.

@SimHangerFS Жыл бұрын

Check the update has not put all your pilot assists back to on. Turn them off.