I'm a single mom and I was seriously annoyed about having to do this but it turned out to be super easy. I fixed my mower and I'm proud of myself!! Haha. Then fixed I the neighbor’s. (Thankfully they were the same.) 😂Double thanks!!

Friggen AMAZING! Worked like a charm!! Our local shop was a month out so I decided to give it a try. Changed the spark plug. Got old fuel out/ new in. Would sputter but wouldn’t start. Found this video and gave it a try. STARTED ON THE FIRST PULL!! THANK YOU!

Thank you! I cleaned out the carburetor with a sewing needle, cleaned out the gas tank and put in fresh gas, and fired it right up! I couldn't have done it without you.

My lawnmower hasn't been working since last fall, and I was very frustrated and decided to watch a repair video to see if I could fix it myself. I am glad I watched your video, it was very straight to the point filled with detail and instructions to the point that I was successful at fixing my 1 year problem thank you so much for allowing me to save money and time

Thank you for the video. I couldn’t start my mower for two years. Kept putting it off. Your video was the perfect pace and to the point. Thanks!!

Awesome! I searched high and low for a video to fix my lawn mower that I left gas in over the winter. While following your instruction, I noticed that the holes in the ejection system did not look clugged. As per your instructiin, I cleaned the out anyway. Low and behold it started after reassembly. Thank you!

Great tutorial video, Hans! You made it look easy. That is nice of you to fix for your neighbor. Hope you’re doing well. 🇺🇸🚜👍

I just did the same thing to a mower that was given to me and it worked. Thank You for uploading this video. Your step by step video made it easy to do. : )

I've never worked on a plastic carb before and couldn't get this thing running after cleaning until I watched this. Runs perfect now minus the throttle wiggling a bit!!! Thanks for your help!!

I have been using a machine with a B&S 450 engine for 10 years, when I once started having carburetor problems I simply used premium gasoline, which in cars cleans the injectors, for three years I have been using it professionally. I add fuel stabilizer. No problem.

Awesome clear and concise video. Great explanation and did the trick. Back up and running Fast. Sorry lawn repair shop but you take the loss and we win on this one.

Great video. Thankfully some people still don't want to mess with doing this, as easy as it is, and it keeps putting money in my pocket. 😂

Thank you, thank you....I confidently took apart my carburetor cleaned it, put it back together, and it runs like a charm. ❤❤

I followed his instructions. Got my mower back up and running. Great advice 👍.

Cleaned the carb as you described and it's running great now! Thank you!

Seriously, amazing tutorial! Worked like a charm for me!

Success! I knew i had to clean the carb but never did a plastic one so the step by step was super helpful! Just old fuel in the carb that didn't allow the engine to turn over. Thank you!!

Mower running rough, tried this, nope. Replaced the carb (with $14 via Amazon), still running rough. It may be time to just cut it loose.....

Thanks my guy I was hating life cutting my moms grass and I went ahead and just performed this fix and puppy fired right up thanks my bro!

I cleaned my carb as per this video carb cleaner and air compressor reassembled fresh gas ran like a Swiss watch cut my grass thanks for the video keep up the great work.

Just watched your video , did what you did…..started on the first pull. Thank you !

Excellent! Followed your instructions & my lawnmower sounds like new! Roared up on the first pull...

Thanks man, i took mine apart, i spent all morning trying to fix mine. Ill give this a try in the am

Every time I have to mess with those plastic carbs, I have a tendency to invent new cuss words.. lol..

You're the man, cleaned my car and started right away!

Awesome video!!! Done it exactly as you said and my mower fired up first crank. Thank you man!!

Thank you for this tutorial , tomorrows project 🤞, too much rain , my grass is out of control 😬and subscribed !

Welders Tip cleaners. Welding supply, Aome Depot, Amazon. Thanks, I found one today 2017 model. It looks like it was used one time. The motor oil is clean as new.

Very helpful. My husband was ready to take it to someone to have it worked on butI was able to clean the carburetor and get it working. Thank you.

Did what U recommended, worked like a champ! Thanks!

Great video. Thank you very much. Saved my mower.

Thanks, solved motor issue following your clear guidelines, cheers 😊

Thank you so much! It worked perfectely for me!

So strange the carburetor is made of plastic. I guess plastic doesn't rust, though. Great little tutorial!!!!!

I decided to replace the jet on mine with a newer design (before 2018 vs after 2018). Snapping the new jet into place was a MAJOR chore, there is no way you can just push it into place with your thumbs. Be warned, other than that it is a fairly easy process.

That was a great video but I have one question on the back of that plastic carb there is that little white thing that looks like a hose supposed to go on there and there is a little black nib on the back of the primer housing it also looks like a hose goes on there as well can you please tell me what they are for and if they stuck air

Excellent tutorial. To ease installation of the carb, remove the engine cover (3 bolts) first. 👍

Very helpful! Thank you!

Worked perfectly fired up on the 3rd pull

Just wanted to say Thank you this was a very good video I was able to fix a Lawnmore i got off of offer up website.

On my Murray 22 inch 450 e, 4.50, Two of the screws are 7 mm for the carburetor, the other two screws for the carburetor are 8 mm

that's really helpful, thank you!

It worked! Thanks for the great video

Congratulations, looks wa easy for You. I wish You are closed to start mine.

It works thank you!

Very Helpful im trying mine to fix it up.

Hey man I js wanna say thank you so much i clean it and it turned right up thank you

Everything I did on my toro 675 series,, I consulted to all experts mechanics on KZfaq,, but still won't start my lawn mower,,, perhaps I need to change my plastic carburetor,, I had checked spark plug,, compression,, timing,, gasoline all perfect,, many thanks bro...

I have 4 mowers to work with. On a briggs and stratton pushmower it doesnt start. Clean new gas. I cleaned carburetor. I replaced a needle and seat. The floater doesnt lay flat, but its springy. Is that ok the floater isnt level cause of the needle and new seat ?

I like your videos. Keep it up.

Can the floater be in 45 degree angle instead of flat even? I installed a needle and seat cause my carburetor was leaking gas underneath. carburetor

I didn't see you use any carb cleaner, on the plastic carb, although I saw a can of it in the video.

Good work

Worked like a champ! 💯 percent satisfied. White crusty particles on the plastic tubes. Cleaned and reinstalled. Nothing beats the smell of lawn mower engines running in the morning. Any recommendation for fuel additives prior to storing in the winter?

Did you ever used that gray spray can ?

Thanks Man

Worked like a charm

right on thanks

I just picked one up for $50 from the thrift store...if it doesn't start, I thank you in advance.

I’m at my 3rd plastic carburetor they are the worst. Mower runs 2 min than chock again!

Thank you for your video .Looks like I have to do that with wire brush thats the only thing i did not do.

Solid.

I have a Murray 500e 140cc Briggs & Stratton it will start then it will turn off would you recommend me doing the same thing to the carburetor as you did or purchase a new carb

Perfect

I couldn’t get the cartridge to snap back in no matter what. It was facing correctly.

Hey, i just got started fixing lawnmowers and I’ve already sold 4. I bought one for 40 but it’s missing the “blade control” cable. I got wires to connect it but i don’t know to what hole to connect it. Any chance you know which one it is?

Yuhh that shit works fixed mine 👍🏾

I cleaned the card real good but she’s still running rough kinda will run high then low then sound weak but she’s running

Thanks!!! You good I guees I learned.

10mm we assume?

Use a guitar string to clean those little holes in the carb 😊

Thank goodness all of my yard tools have metal carburetors. “They don’t make them like they used to.”

I did that and it didn't work for me so where did I go wrong

Awesome 👍🏽

I replaced my card but it still won’t start without starter fluid. Any advice?

Are there some other things I should check prior to taking all that apart?

Hey Hans, what spark plug does the Brigggs and Stratton use and gap size ? Can u show a video on how to pick and gap size the spart plug please thanks. U got a fan here in the SHOW ME STATE of ST. LOUIS MO.

Hi Tractor Hoarders✋I have a same motor 550E. My motor do surging. I cleaned the carburater twice but still surging. What i need to do?

Worked great to get it started back up, but after a little mowing, it won't stay running

I wish you were my neighbor, I’m having trouble fixing this thing.

Hellllpppp......I got it to start.....buy its leaking gas now.......is the linkage cable supposed to go in a certain way? I'm thinking now the float isn't wrking properly

Where are you located Are you in Atlanta Georgia

Just ran thru these steps on my mower and it started up, but it feels weak and stalls after 4-5 min . Any ideas ?

Oh yeah I will thank you

💯

It’s already clean.

Nice….

PLEASE HELP!!! I did all of this down to the “T”, and now I have gas squirting out of that little white nozzle next to the fuel line and it’s squirting out of the damn Primer bubble??????????

I didn’t have any luck

It starts then dies

I did everything I saw on the video, and it still doesn’t work… But great video!!

tnks I to😂ok it apart every tng was good and started up tnks