Audi A2 - sensor for evaporator outlet temperature (G263) replacement - EP8

No video

Audi A2 - sensor for evaporator outlet temperature (G263) replacement - EP8 - project youngtimer

Рет қаралды 13,660

MtlCarGarage

Күн бұрын

Пікірлер: 28

@nomansland5268 3 ай бұрын

Thank you very good explained will change tomorrow

@Winnetou834 Жыл бұрын

Thank you so much for sharing your Knowledge! This was so helpful!!

@MtlCarGarage Жыл бұрын

Glad it was helpful!

@martinb8874 Жыл бұрын

Thank you very much for the video! It helped a lot in replacing the sensor! To remove the clip that holds the cable to the aluminum plate (shown at 11:37), I used an M5 nut (actually a wing nut, but a normal nut should work the same) that I put over the clips. That compressed them so I could easily draw them through the hole.

@MtlCarGarage Жыл бұрын

Thank you, great tip.

@heisenberg...3429 2 жыл бұрын

I have the same problem. Your professional video helped a lot. Thanks and keep it up...

@08alexcoolboy 2 жыл бұрын

very helpful video and really well explained. you got a new subscriber sir !

@MtlCarGarage 2 жыл бұрын

Awesome, thank you!

@tanie3803 4 ай бұрын

Thank you

@MtlCarGarage 4 ай бұрын

You're welcome

@hayrikarabas 2 ай бұрын

Can you even show us how to change front and rear oxsygen lambda sensor replacement on Audi A2

@MtlCarGarage 2 ай бұрын

Sorry, I do not have time for this ;). Maybe if I will have problem with them in the future.

@pourratmatthias8513 11 ай бұрын

Thank you!!!

@MtlCarGarage 11 ай бұрын

You're welcome!

@tole4022 2 жыл бұрын

Witam Wielkie Dzieki Super Film Hello. Super video, Thank you for the instruction👍

@user-yq2ue8do4m Ай бұрын

Why do you need to remove the A pillar lower trim and the bottom trim? Why is that needed for this job?

@MtlCarGarage Ай бұрын

To get access to the sensor.

@TheJonrag Жыл бұрын

Thanks for the video! The problem I have is that the fan does not work properly, I still have the same problem after changing to a new fan. Is this also the censor that causes this problem?

@MtlCarGarage Жыл бұрын

Sadly I do not know. I did not have this problem. But I do suggest to check with diagnostic if the trouble code is present. If the problem is in this sensor, the trouble code should be present.

@123Poppa321 Жыл бұрын

Thank you for your very understanding video. Very well explained. I have got a problem with my A2 that AC only delivers ice cold air. I can not reach the control module with VDCS and the hidden menu (air circulation+arrow up) does not work either. I have tried a different module but it behaves in the same way. Can it be possible that a faulty sensor confuses the module in a way that it can not be reached? What or which sensor could this be? Any help is greatly appreciated. Kindest regards, R. Winter

@MtlCarGarage Жыл бұрын

Sadly I cannot give any usable suggestion. I would try to find a cheap used AC control unit and test it with that one.

@user-tc6zu9su8c Жыл бұрын

hi. owning a2 1.4tdi. need help with 00710 fault. Any suggestion? thanks

@MtlCarGarage Жыл бұрын

So defroster flap, right? There is no other way except to take it out and try to repair it or replace it. Check if there is an option to recalibrate it first…

@domenicovicidomini5130 Жыл бұрын

buonasera non parlo inglese scusami o un audi a 2 disel non mi funziona piu i 2 telecomandi chiusura e apertura porte mi puoi dare qualche consiglio

@MtlCarGarage Жыл бұрын

Vedere con diagnostica, qualle errore e presente.

@domenicovicidomini5130 Жыл бұрын

@@MtlCarGarage grazie ritorno dal tecnico auto

@alessandroveneziani3325 Жыл бұрын

Non mi funziona l'aria calda può essere questo sensore?L'aria condizionata funziona caricata Agosto ma solo fredda calda nn va..Audi A2 1.4d 2003.Grazie.

@MtlCarGarage Жыл бұрын

I would start with a scan with diagnostic equipment. That should point to the problem.