Do you use an electric...or gas powered pressure washer?

Brian is a Jack of all trades being able to teardown anything!!! Happy 4 July, hope you are taking a break today

Thanks for this wonderful post

A Thing! Yes!. Really interesting vehicles. Haven't seen one in person in a long time that's for sure. I kind of forgot how small they are seeing you tower over it.

I like the car! It may be the first (VW) Thing in the history of humanity to get a wash. ;)

You remind me of “ Tim the tool man” 🤣 you up great everything you own !! “ it needs more power”

Brian happy 4th of July to you and your family,have a safe Independence day

very cool video my friend. ru having 80's flash back with that scale...lol.enjoy ur 4th of july..b well and safe buddy. .

HOW do I know which size Orifice I have in mine?? I opened my MTM PF22 which I bought from Amazon for my electric pressure washer but don't see any markings on the orifice to know what size it is...

What do you suggest using on the quick connector to keep it lubed, so that it “swivels” well? Thx Brian

What can I use an a lubricant for the quick disconnect and swivel?

I'm hoping you can help, I just purchased the SG28 with the of 22.2 cannon. When trying to use the stubby, the water shoots out all around the tip but not through the tip. Yes the connections are tight and sealed with teflon tape. I'm using the Ryobi 3300 psi 2.3 gpm gas pressure washer. If I change to the stock Ryobi tip as well as a generic 40° tip to the stubby I get the same results. When I use the stock Ryobi wand with the foam cannon as well as either tip it works fine. I can't do understand why the water is spraying all over the place from around the female quick connect at the tip? There is not an o ring that could be broken?

Thanks for the video Brian! I have a Ryobi electric pw, cheap Amazon foam cannon and the 1.1mm orifice. I can get great foam however I can barely get around a mini van before my bottle is nearly empty. What is the trick? I've seen other youtubers lay down foam around the whole vehicle twice with a quarter left still in the bottle? I've done 2-3 oz soap with either 10 oz water OR the rest of the bottle full of water.

Apex detail... I know you're vid is old, but I have a question. My gun has been dropped a few times. Why may it be running water on its on without trigger engagement?

What product would you recommend to lubricate the quick disconnect coupler on the nozzle(where the foam cannon would attach to). Mine gets stuck sometimes. MTM said any silicone based lubricant would do. Would WD-40 be fine?

Do the braided hoses layout better and no chance of kinking? Thx Brian

Ive pressure washed 200 plus decks/houses over 20 plus yrs. Didn't know much about the guns or wands, but I sure do now...

Great informative video Bryan !!!!! I have gone through two of the cheaper Duschin short handles as the trigger tends to break. My next purchase will definitely be a beefier MTM. Do you know what size the inlet is on the MTM? I noticed the Duschin has a threaded male connect while the MTM does not. I need he threaded male to connect to my electric PW. If you happen to know the size it would be very helpful when I order.

The THING!! 😮

Hey Jimbo how many of the plastic bottles do you go through in a season or year. As careful as I am I find myself going through about 2 or 3 a year.

Good video Brian very interesting, just do not know what would be your option 1 and what would be your option 2, cost and utility ... thanks for sharing ... always pending your videos

Hey Brian I'm currently using a low pressure foam cannon (which I bought for an electric pressure washer) on a 3100psi gas unit. It doesn't seem to work very well. Have you ever tried the 1.1 orfice on high pressure just to see what happens? It's a cheaper generic foam cannon so I'm not sure if the orfice size is hurting performance or if it's just a cheaply built unit. Thanks and Happy 4th to you

Hey Brian, noticed what looks like a GreenWorks Electric pressure washer in your video...I've got a SunJoe 3000, and I've struggled to figure out how to adapt it to a snub gun? The hose has M22/15mm ends on it, and I've tried to configure things so I can get a snub gun? There has to be an easier way than getting multiple male/female/plug adapters?? I keep running into a dead end....I just want to get a nice 50ft flexible hose and snub gun with one adapter on the output of the SunJoe unit? Oh, and what gas pw are you using in this video?? Happy 4th of July!

I am in the Uk. Do you send products across the pond? If not do you know of any distributor in the UK? Like you videos.

What do you suggest for lubrication on brass quick connects?

Hi. When you say keep the connectors lubricated, do you mean adding oil based lubrication to the joints of the QC? thanks.

Another great informative video 💪🏾 god bless! So I have a request, there’s a lot buzz going on with IPA, to use it or not to use,just wanted to see what’s your opinion on that , thanks

Hey Brian, I'm just pulling together a video demonstrating the difference in flow rates for the generic guns Vs the MTM one, would you mind if I included a bit of your tear down footage in my video? I'll of course put a card to your full video, but I wanted to ask permission rather than just doing it.

Good video , thin foam...it should be closer to lather like shaving cream.

correct me if i'm wrong, but those QD's alone can't swivel under pressure

Hey Brian, I'm pretty happy with my MTM setup, but I could use a hose that's less of a pain in the ass. Would like something that's flexible and easier to work with. Any suggestions?

Where did you get the smaller orifice

Have both... use the gas washer.

79 through 87 big huge blur...oh yes it was...

I have a honda gas powered.

How do you get away with washing a car indoors? Is using soap foam really necessary other than being cool looking? Why not wash cars the old way using just soapy water and a mit?

They’re so much here that out was nearly useless

The width of the tubing isn't the "difference between a high and low pressure unit" its the difference in a high flow and lower flow rated unit lol both of these a junk btw just roll with a suttner st2605

Hey this reminds me. If you can measure with your calipers the diameter and the whole length of a costing bottle, all sizes... message me the measurements at my instagram. I want to start engineering one and machining a coating bottle holder

What a waste of soap u still got to use more soap to wash I’ll stick to rinseless