Much Needed Step for John Deere 1025R!

Рет қаралды 64,655

5 жыл бұрын

Tractor Time with Tim installs the new step for the John Deere 1025R from Bolt On Hooks. This new step bolts to the loader mount in less than 30 minutes! The 6" drop reduces the first step height to about 14" from 20" making it easier to get into the seat. The step has a large 4-1/2" x 4" non-slip step area and doesn't interfere with other accessories or implements. This is another great product from Ken at Boltonhooks.com!
Tractor Time with Tim
Website: TractorTimewith...
Favorite Products: amazon.com/shop...
TTWT Merchandise: TractorTimeWith...
Facebook: / tractortimewithtim
Sponsors:
Bolt On Hooks (and other accessories):
www.boltonhooks...
Good Works Tractors:
www.goodworkstr...
ISOTunes link: bit.ly/2sCMOG4
Special Promo with Coupon Code TTWT

Пікірлер: 263

@lazerbeam3928 5 жыл бұрын

Two observations: (1) Don 't use a torque wrench to loosen tight bolts. (2) After torqueing the bolts down, you should go back and do them one more time. You might be surprised that more often than not they will actually torque down a little more.

@16B9 5 жыл бұрын

I got my 5" step for my 1026R with the Mauser cab two weeks ago from Ken. Easy install and excellent addition to my tractor. (I wire bushed my bolt threads clean before I put Lock Tight on them)

@photocontrol 5 жыл бұрын

Nice little accessory for Johnny! Makes stepping up and off much easier.

@88dalejr1fan 5 жыл бұрын

You do a very good job of the installations showing the proper way using a torque wrench is the proper tool awesome job

@doogiek13 5 жыл бұрын

I had a local machine shop fabricate a step for my Kubota B2301. Makes all the difference in the world after a project that has you on and off the tractor a bunch of times.

@Slideways24 3 жыл бұрын

Tim enjoy watching your videos. Always nice to see the video end with a biblical encouragement.

@samtalley791 5 жыл бұрын

Tim this video seems so professionally made. Great job to you and your wife on how you did this!

@TractorTimewithTim 5 жыл бұрын

Thanks for your kind words!

@rangermacc Жыл бұрын

I was able to add the step thanks to your video took about 10 minutes. You are great

@kevinsheddrick2757 4 жыл бұрын

Just bought me a 1025R and playing catch up on all your videos. Really enjoy them! ps: Love the Psalms 37 verse when doing a step install video... well played!!!

@TractorTimewithTim 4 жыл бұрын

Congratulations, Kevin, and Welcome to our channel. Lots of catching up to do, but hey, it IS winter! Keep on watching and commenting!

@jasone9 5 жыл бұрын

Those new lights in your building are fantastic

@AppleUser 5 жыл бұрын

Outstanding! Exactly what I need. Thank you very much for showing this product.

@southlakelife 5 жыл бұрын

Another one well done Tim! It's hard to believe how much a little step like that helps out when climbing on and off. Particularly so as we age. Lol.

@lonniecurtis3540 5 жыл бұрын

HI Tim great video,i like the new shed and the lights,cant wait to see it all organized,ha,ok later Tim,

@rogerhuber3133 3 жыл бұрын

There are different types of torque wrenches. SOME....will work in the OFF direction and SOME WON'T. This type is needed to check existing torque which can be important at times. It's common in the aircraft industry. Generally though if it isn't one of those it can damage the internal mechanism. Best practice is to use a breaker bar to remove bolts.

@murraygood276 4 жыл бұрын

Just what I have been looking for. I have MS and fall down just walking, once I'm seated all is good. This will help so much, thxs.

@TractorTimewithTim 4 жыл бұрын

Sorry to hear about your MS.

@curtwhite876 5 жыл бұрын

Red loctite comes loose with heat. Agree, blue is better for this application. That step looks a whole lot better than the flimsy formed sheet metal step that comes on the Kubota B2650. More great stuff from Ken's Bolt on Hooks...

@jeffcolley8979 5 жыл бұрын

Kens bolt ons are the best. Keep up the great videos you guys.

@kdeckster 5 жыл бұрын

Thanks Jeff!

@eosjoe565 5 жыл бұрын

While on the subject of click-type torque wrench usage... ALWAYS reset the torque wrench to its lowest setting prior to storage. This will preserve the calibration.

@HamiltonvilleFarm 5 жыл бұрын

looks like it's gonna help ease the getting in and getting out. Good job. Looks sturdy too.

@michaelmactavish1728 5 жыл бұрын

tobad the steps doesnt come factory when tractor was made like kubota does

@akbychoice 5 жыл бұрын

Michael Mac Tavish that’s something relatively new with Kubota.

@PhilHilton 5 жыл бұрын

Thanks, You really stepped things up for this video.

@KirtH27 2 жыл бұрын

I will be ordering this

@RJ4O4 5 жыл бұрын

you sir...truly are my hero. ive been looking everywhere for a step solution for mine. I have the original cab though so I guess I need the cab version..... EDIT..also want to say I never knew about this site. just checked it out and probably will get the seat springs AND differential pedal modification. GREAT Stuff ! Why doesn't deere themselves think of these things? !! :)

@TractorTimewithTim 5 жыл бұрын

Thanks RJ. We've mentioned boltonhooks.com many times in our videos. Glad you've finally taken the time to check them out! Excellent, helpful products.

@RJ4O4 5 жыл бұрын

@@TractorTimewithTim Wow..i watch a LOT of your videos and this was the first I ever saw it. I guess I was too busy buying all the other stuff you've mentioned :) Anyways...REALLY helpful with the step.

@dwayneloftice2326 3 жыл бұрын

Ken makes great products! I see you guys are "stepping" up in the World!

@TractorTimewithTim 3 жыл бұрын

Love the step!

@peterkober6758 5 жыл бұрын

Tim Christi good show the blue is great I retired from a large equipment company and used numerous different types of locktite they all work wonderful butif using the wrong one you may never get it lose thank you God Bless PaK

@eosjoe565 5 жыл бұрын

FYI... even the red can be loosened by applying some heat.

@peterkober6758 5 жыл бұрын

@@eosjoe565 try pruple or green

@eosjoe565 5 жыл бұрын

@@peterkober6758 Purple is low strength stuff designed for very small bolts (< 1/4") that need to be adjusted. It would not be applicable for the loader bolts. If I recall, the green stuff is for applying to fasteners that are already assembled. Not sure how it is rated strength wise.

@kdeckster 5 жыл бұрын

Great video Tim, thanks!

@kenmaine9437 4 жыл бұрын

Tim your use of a torgue wrench is correct, I have seen misused when they put a 6" ext on the Torque wrench, the 6" ext lower lbs at the bolt or nut. Very Good.

@brucealvarez9263 5 жыл бұрын

Interesting that Loctite puts blue fluid in a red tube. Seems like they might want to match the tube color to the fluid color so you can easily grab the right one. And conversely, not accidentally install a bolt 'permanently'. Looks like Christy and Katriel will both appreciate that new step.

@tgilldesign 4 жыл бұрын

Ha! I thought the very same thing.... stupid marketing move.

@danimal1611 5 жыл бұрын

Hopefully Ken will do something like that for the 2320. A little step up would be so helpful.

@alaya9860 2 жыл бұрын

I have a 2320 and desperately need a step!!! JD said they dont make them??? Been getting on and off for 15 yrs. body is torched!

@doogals 5 жыл бұрын

Sometimes the simplest modifications make the biggest differences. Tada!!

@bottomupbrewz8981 3 жыл бұрын

Thanks for the vid, I have one on order and will be installing it soon!

@lennykouma2438 3 жыл бұрын

Will this step interfere with drive over deck?

@nevanbradshaw216 5 жыл бұрын

When using a torque wrench never use it to break a bolt lose. Always store at the lowest setting. When tightening a bolt go in intervals with the torque wrench

@TractorTimewithTim 5 жыл бұрын

I never made it ‘click’ when I was loosening, so there is no way I damaged it.

@jeffreyallan2545 5 жыл бұрын

Tim it is only rated to torque or “click” in the tightening direction. It won’t click in the loosening direction no matter how much torque you apply to it. Unless it is rated to torque in both directions which very few of the common torque wrenches are.

@Malakie 5 жыл бұрын

Ok Tim, no one else said it.. but I am going to.. Sucks to get old so much you need a step to get up on your one series, huh? LOL 😂

@joshh7002 5 жыл бұрын

Well now I will have to order one it does look nice.

@michaelbradley8508 5 жыл бұрын

Thank you for the video Tim. I was not aware the step was available through 'Bolt On Hooks'. I have looked on-line and have asked my dealer about a step and haven't been able to find one. I have a bad knee and my wife is quite short, so we need this step. I will check out 'Bolt On Hooks'. Michael from Canada

@jeremylapar5157 5 жыл бұрын

Hey Michael, I have a 2019 1025R that just bolted on some steps I bought off eBay. These ones were a bit more but did have a tie down loop built into it for the left side along with a right side loop plate for tie down purpose. Not trying to steer you away from bolt on hooks but I do like the extra/easy tie down on this step.

@michaelbradley8508 5 жыл бұрын

@@jeremylapar5157 - Would you mind forwarding the link to the steps you found. I went to eBay and typed in 'step for John Deere 1025R' but nothing came up. Michael Bradley

@jeremylapar5157 5 жыл бұрын

For some reason I can't copy and paste a link, but I did type in 1025R steps and it brought up the ones I purchased plus a couple others. The seller is Mudds Customs (dmudd3), maybe by searching under the company name might bring ya luck. I purchased the shorter step instead of the longer step because the longer step will interfer with the midmount mower deck.

@dman8925 5 жыл бұрын

@@michaelbradley8508 muddscustoms.com has them with the tiedown

@dman8925 5 жыл бұрын

@@jeremylapar5157 thank you for your purchase, I appreciate any feedback

@johanbos160 5 жыл бұрын

That's a great step tim and looks and works perfect and the right colour 👌

@PhatboyHD88 5 жыл бұрын

Hey Tim just some fyi ,, on bolts that large being tightened to those specs i “Always “ use red loctite,, put a impact gun on them and they come loose with no issue what so ever,, i do it all the time ,, hardened large bolts like that you will never have a problem...esp on bolts that you can’t afford to come loose on you like the ones you are doing..

@Drew6709 5 жыл бұрын

Looks like the step needs to be about 2" lower to make access easier. I don't agree with location. Curious if a step below the floorboard would interfere with the mower deck? Looks like an investigation for "Bolt On Hooks" to do. :)

@kdeckster 5 жыл бұрын

Lower can interfere with the MMM. There is nothing good under the floorboard to support the step, nothing we were comfortable with anyway.

@truckerray7533 5 жыл бұрын

Thankya for sharing this video Tim l. Ive been wanting to install some steps of somekind to my 1025R as well. this gives me some ideas. thankya for sharing the video

@TractorTimewithTim 5 жыл бұрын

Thanks for your comment, Rodney!

@mattphillips4260 5 жыл бұрын

not good idean to break bolts loose with your torque wrench like that tim

@Ghostrider304 5 жыл бұрын

matt phillips, beat me to it.

@ynotshowme2ur3times 5 жыл бұрын

Ya. I needed to change a tire on my wifes van last year and broke the lug wrench/ jackhandle and walked half a mile to a garage to borrow a wrench and thats what the guy lent me was a snapon torque wrench! Need i say mire thank god they are full warantee and the guy just laughed. But it was pretty insulting handing him a torqe handle and a 1/2in socket. ...plug er whatever it became cause the square socket drive was sheared off smooth

@eosjoe565 5 жыл бұрын

We'll have to cut Tim some slack this time around - I think this is his first torque wrench. :-)

@TractorTimewithTim 5 жыл бұрын

Folks, I did not push it past the ‘click’. There is NO WAY that I damaged it.

@danvanf 5 жыл бұрын

@@TractorTimewithTim Thanks for pointing that out, I use a torque wrench from time to time to loosen a bolt, it's all about over stressing it. I sometimes like to see what they break free at, just to learn. Oh tell Christie(sp) that her editing skills are doing good. Nice use of banners with fades and all. Tim would agree she is the real power behind the scenes. Nice job, you're learning well.

@phill903 5 жыл бұрын

That step is a must with or without the loader bracket. make getting on the machine easier and safer use.Sure wish I had a 1025R with lbh.

@hsmith3844 5 жыл бұрын

I was taught to toque bolt by thirds, divide the total torque spec by 3 then torque each bolt by each number till at full torque. That could be just for engine building, I could be wrong, but its a habit I continue to this day

@joshriddle4797 5 жыл бұрын

You lost me at 3 😂

@robertbennett6697 5 жыл бұрын

I was going to ask if anyone else had learned to do it in steps.

@scottsendra491 5 жыл бұрын

I noticed especially on the center bolt, when using the torque wrench, after you heard the click, you kept on turning the bolt. I usually go slow when I know I am approaching the torque setting, so when you hear the click, you stop immediately. Also, when tightening multiple bolts on the same assembly, I usually set up the torque wrench to 1/4 of the full torque and tighten all bolts, then set to 1/2, then to 3/4, then full torque. This way the entire assembly is seated correctly, and you do not have one bolt at full torque and the others are loose. You might be able to speed it up by goin 1/2 and then full. I also recheck all bolt torque, to make sure that I did not miss any bolts and that they did not loosen.

@truckerray7533 3 жыл бұрын

Good job. Tractor safe

@johnpeters2211 5 жыл бұрын

Honestly im a mechanic for 27yrs these arent bolts i would torqe. 1/2 impact. A IR244 and ck with a socket and breaker. Good n tigjt is good on those.Tim i love your Channel the love for your family is crystal clear but never never use a torque wrench to loosen tight bolts you have a blessed Sabbath and continue with the videos please

@TractorTimewithTim 5 жыл бұрын

Thanks for the kind words. I understand the ‘rule of thumb’. I just can’t see how I caused any damage by loosening those bolts. Would be same as tightening left handed threads. I did not push beyond the ‘click’.

@jaybee2344 5 жыл бұрын

Just use a lock washer on th bolts! Note: NEVER STORE A TORQUE WRENCHED "LOADED". It must be stored at ZERO torque amount.

@kdeckster 5 жыл бұрын

Bad idea, that will just reduce thread engagement in the hole. A thread locking product is far better here.

@kevin_6217 3 жыл бұрын

Lock washers don't actually do anything...

@tomfarrand3426 5 жыл бұрын

she makes that tractor look HUGE

@benjaminstockton3917 5 жыл бұрын

Good video Tim

@russconklin3414 3 жыл бұрын

You don't have to pull the loader all the way off to do the step, just pull off far enough to take the weight off the tower.

@JunkyardTailgate 5 жыл бұрын

Nothing but a step for a stepper!

@airealguy 5 жыл бұрын

Looks like a great shin buster

@TractorTimewithTim 5 жыл бұрын

Might be, who knows? It doesn't project outward from the tractor. I haven't busted a shin on it yet. Having said that, I whacked the ROPS again with my head today! Ugh!

@airealguy 5 жыл бұрын

@@TractorTimewithTim I jump off that side of the tractor all the time. I think I'd forget it's there and really hurt myself. I'm really accident prone.

@TractorTimewithTim 5 жыл бұрын

Like I say, it doesn’t stick out.

@airealguy 5 жыл бұрын

@@TractorTimewithTim not out to the side but sticks out where your feet/shins/ancles go getting on and off. Know there's no room, but a step mounted to the underside of the foot platform might be better

@TractorTimewithTim 5 жыл бұрын

Ok, I understand. I’m just relating my experience. You can choose to accept that experience or not. Your experience might be different. Who knows. I have had no issue running into the step. In fact, I kinda wish it stuck out an inch or two further at times.

@josephsierra7295 5 жыл бұрын

Love my step...

@tyreluedke156 Жыл бұрын

Tim where did you get the 223 lb-ft number. The book & dealer says 146 lb-ft?

@mikefortune4796 5 жыл бұрын

Hi Tim and Christy nice touch there Tim nice video

@michaelsunsdahl5874 5 жыл бұрын

Very cool Tim! Thinking I might pick up a set for my neighbor. When are we getting together to see Johnny and the homestead in person?

@kw900lkevin 5 жыл бұрын

In case no one mentioned it that type of torque wrench and most are not designed to loosen any fastener, just use a breaker bar or long ratchet

@KiotiCS 5 жыл бұрын

Looking good there Tim great job ! looks nice on Johnny i have been looking at how i can put steps on the Kioti for when the deck is on ! have a great day and a good weekend ! Kioti Curt :-)

@user-qg2sv6pq9m 18 күн бұрын

How is clearance with the load and go?

@michaelbaker7613 2 жыл бұрын

Hey Tim were are you getting your next step from for your new John Deere 1025r bolt on or mudd’s ?

@GitSumGaming 2 жыл бұрын

mudds customs makes an 8 inch drop that works if you don’t have the load n go. That would make its little easier to get on tractor. To my understanding they make some of the products for bolt on.

@brutallyhonest5239 5 жыл бұрын

always good to buy american made products 👌👌

@jokinjoe9447 4 жыл бұрын

john deere is NOT american made,made in either china or korea until u get up to about 80 hp

@ahack14 5 жыл бұрын

Not supposed to use a torque wrench to loosen bolts...

@toxrozzx8158 5 жыл бұрын

Yeah, I would rather use a Breaker bar

@jimgroff6880 5 жыл бұрын

Nice video Tim. I'd like to see step away from the tractor vs. towards the back axel. My 2¢

@justdoingmyownthing.2504 5 жыл бұрын

Check out Mud's Customs, he has one that might be what your looking for. facebook.com/search/str/mudd%27s+customs/photos-keyword?epa=SEE_MORE

@earthcrusher2500 5 жыл бұрын

Hey happy Friday

@hamiltonwinegeart3793 4 жыл бұрын

I ordered a step an used ttwt code. Didn't receive free shipping. I did receive $4.75 off. Thanks

@TractorTimewithTim 4 жыл бұрын

WooHoo. boltonhooks offers 5% off with code TTWT...does NOT offer free shipping. Each vendor is a bit different. I think you'll like the step. I use it a LOT.

@jeverhart99 2 жыл бұрын

Just got a 1025r with 60D and load and go. Does this 6" drop step seem to work ok with that? I think you have same set up but not sure,

@TractorTimewithTim 2 жыл бұрын

Yes. Works fine.

@GitSumGaming 2 жыл бұрын

@@TractorTimewithTim I saw one from mudds customs that’s an 8 inch drop that works if you don’t have the load n go. That would make its little easier to get on tractor

@justdoingmyownthing.2504 5 жыл бұрын

Great product, but Mud's Customs has been selling them for about a year and he has 3 different versions.

@kdeckster 5 жыл бұрын

Correct, so what?

@justdoingmyownthing.2504 5 жыл бұрын

@@kdeckster So if they are looking for a step and the one you sell doesn't fit what they are looking for then check our Mud's Customs for there are 3 different options. Relax, I think you give great products to at a very reasonable price. You want a suggestion, Check out John Deere's new loader attachment for the 1025R 60"mmm. I have had a chance to see one up close, I think you could make one that is nicer then what they have done and also make one for the 54"mmm. Just an idea. (Updated Correction) I do see that you have the 2 main types at a very reasonable price.

@bradmeszaros3717 5 жыл бұрын

My lock tite was 242 red color. When I installed the step, with load and go ramps, you can’t raise deck to the highest position without it hitting the step.

@TractorTimewithTim 5 жыл бұрын

Must be a difference in deck adjustment. Mine fits fine.

@bradmeszaros3717 5 жыл бұрын

Yes. Must be. Mine is a 1026r. I see your deck tension spring is different than mine. Wonder if deck layout is same on older models.

@retireddriver16 5 жыл бұрын

Tim it's bad to use the wrench that way the snap of the bolts coming losses is what hurts it

@kenlitherland6065 5 жыл бұрын

Christie, your welcome. Tim it looks like the cheeseburger challenged still need the steering wheel for support being front heavy. Ken has meet a big need in the 1 series world.

@kdeckster 5 жыл бұрын

We will have a handle available soon to help Tim LOL

@deangoggle8967 3 жыл бұрын

Where can I order that step from and get it shipped to Canada?

@dennissmallwood9932 3 жыл бұрын

As you no doubt know, MUDD makes these steps in 3 “lengths”....I think something like 3,5 and 7 or such. First, since I intend to install the easy lift brackets on my 1025R mid mount 60 inch deck...Is there a max size recommended and/or are any of these steps likely to get in the way of the mower deck or prevent it from being raised to the fullest?

@TractorTimewithTim 3 жыл бұрын

muddscustoms.com use code ttwt for a 5% discount. I recommend the smallest one. It is very close to hitting the deck on my machine.

@GitSumGaming 2 жыл бұрын

I was told the 5, 6 or 8 inch works. The 8 inch with the deck fully up the bar goes above it a little so you would have to lower the deck a little to use the step but it doesn’t hit anything.

@TractorTimewithTim 2 жыл бұрын

Some mower decks are adjusted differently than others. Some actually hit the step.

@GitSumGaming 2 жыл бұрын

@@TractorTimewithTim Maybe if the deck is set up abnormally high? But I called and talked to the guys at Mudds and they said the 6 and 8 inch both work. He said as long as you dont have a lock and go on the deck; just a standard 60d, that the 8 inch works fine but if you raise the deck all the way up it sits below that bar on the deck so you would have to lower the deck some to use the step but nothing should hit.

@TractorTimewithTim 2 жыл бұрын

@@GitSumGaming yes, without load n go, it will work. Load n Go is more valuable than the longer step IMO!

@brucebishop3044 4 жыл бұрын

Tim, I have two questions: 1) Do you have to remove the front end loader or can you install the step with the loader still attached? 2) Will that step fit a John Deere 1023e? Thanks, I enjoyed your video.

@TractorTimewithTim 4 жыл бұрын

1) remove the loader! It takes 30 seconds!!!!!!! 2) yes

@paulsergojan1541 5 жыл бұрын

Your loader support bracket bolts are now seated short the distance of the added width of the step from the engineered thread seat that Deere designed for that loader support bracket.

@TractorTimewithTim 5 жыл бұрын

Lots of discussion on that behind the scenes. The designers behind the scenes are convinced that there are sufficient threads left to hold sufficiently.

@paulsergojan1541 5 жыл бұрын

That will not be the position the Deere Corporation takes if anyone or any property is injured. @@TractorTimewithTim

@TractorTimewithTim 5 жыл бұрын

So?

@FishFind3000 5 жыл бұрын

Yea I wouldn’t space the bolts out. I’d weld something on it or find another location.

@macdawg6403 5 жыл бұрын

Have you all done a update on the Pole building ??

@TractorTimewithTim 5 жыл бұрын

Sunday Morning 11am EDT!

@PaulChristenson 4 жыл бұрын

Time for you to do a video on the ways to "certify" your torque wrench is still within spec...:)

@rogerhuber3133 3 жыл бұрын

Tim, I bought the step and I'm trying to install it. Using a 1/2 breaker bar and an extender pipe the 3 bolts won't budge! Even using my impact wrench and 120 PSI nothing. I've been soaking them with WD-40 and a penetrating oil but they don't budge. Is it possible some tractors used left hand threads on these bolts? Mine is a 2015 1025R. Any ideas?

@TractorTimewithTim 3 жыл бұрын

3/4” drive socket with pipe extension. Getter dun!

@javadome2573 3 жыл бұрын

Hey Tim, will these steps be effective if there is a cab on the 1025R?

@73superglide62 3 жыл бұрын

Hows work hard cab ?

@ddsgala4405 5 жыл бұрын

Good things come in short packages lol good Visio

@davidshipulski4532 5 жыл бұрын

This was a funny video tim! Good job!

@daveroberts9921 5 жыл бұрын

I bet there isn't a John Deere mechanic out there using a torque wrench on those bolts. They are just zipping them on with an impact. Been a mechanic for many decades, trust me they don't have time for that.

@kdeckster 5 жыл бұрын

Probably true, but that doesn't mean it's correct right?

@daveroberts9921 5 жыл бұрын

@@kdeckster that is true. Most techs are paid by the job. The faster they are the more money they make. Shops pay them this so when business is slow they don't pay the techs anything.

@joelhenry7546 5 жыл бұрын

R.I.P torque wrench

@mattramsey9158 3 жыл бұрын

So ken’s site said it may interfere with the load n go for the 60d deck. Have you been able to confirm this? Did you have to raise the step up a notch?

@TractorTimewithTim 3 жыл бұрын

mine does NOT interfere...it depends upon the adjustment of the mower deck. Mine does not raise quite as high as some others. Even so, if you have issues, you can move it up one hole as Ken states.

@mattramsey9158 3 жыл бұрын

So it doesn’t interfere with attaching and detaching the mower deck with load n go just parking the tractor with deck fully up possibly?

@earthcrusher2500 5 жыл бұрын

Hey good call on the step, and looks like it's going to be able to handle us cheeseburgers challenged,

@keithstickan6486 5 жыл бұрын

Nice

@rexbarrett1643 5 жыл бұрын

230 lbs of torque equals 1 double cheeseburger! Right?

@TractorTimewithTim 5 жыл бұрын

Ha!

@OLIVER_1969 5 жыл бұрын

Nice step , careful with locktite it stains the paint

@Backhoebb 5 жыл бұрын

How do you like the new 260b backhoe? In my opinion it’s the only real “improvement” on the new generation.

@thomashempleman7081 5 жыл бұрын

I must have been one of the first people to get the step for my 1025R last year. I got it from Mudd's Customs and it has saved a lot of wear and tear on my knees. I love it. Tim, I just saw something about the John Deere Load-N-Go (part # BXX10241) at Greenpartsstore.com. It looks like it would make 60D mower maintenance a lot easier to manage. Any chance you could beg, borrow or buy one and let us know what you think?? Thanks for your informative vids. Also like how you tie in your scripture at the end to the video subject. Very creative!!

@dman8925 5 жыл бұрын

Thank you for purchase. is it meeting your expectations

@TractorTimewithTim 5 жыл бұрын

I have load n go. Will do video soon. If you haven’t bought, hold off. I’ll get you free shipping.

@TractorTimewithTim 5 жыл бұрын

D Man, are you Derek Mudd?

@thomashempleman7081 5 жыл бұрын

It works great. just wish I had waited for the longer step. I have a Mauser cab and the short step that I got is a little too short. But it still saves my knees.

@thomashempleman7081 5 жыл бұрын

Great!! Thanks. The step saves my knees. the load-n-go might save my back. It isn't easy getting old. Too many cheeseburgers over the years.

@thomasdesmond2248 5 жыл бұрын

Love it God bless

@marilynwitherell186 2 жыл бұрын

I retired from the company that makes the loctite tub.

@marilynwitherell186 2 жыл бұрын

Tubes, not tub. Auto correct was wrong here.

@rideingbikeswithj2989 5 жыл бұрын

I love you guys

@keithstickan6486 5 жыл бұрын

Does he make one for the 2025 model. I have a 2015 and its a long step for me.

@brentgiles5515 5 жыл бұрын

That's a pretty handy step. I don't always get on and off my tractor on the left side like where you installed the step. The step doesn't look universal for right and left. Do you know if JD makes a step for the right side too?

@TractorTimewithTim 5 жыл бұрын

The loader hydraulics are in the way on the right side. By the way, JD doesn't make this step, it is sold by boltonhooks.com

@dunner8125 5 жыл бұрын

I wouldn’t put that mount under bolts that hold loader...would get bolts that are threaded on other side of head n put on that way

@kdeckster 5 жыл бұрын

Like a "double bolt"? I don't follow????

@Cat3406e 4 жыл бұрын

I hate to break it to ya but when we use to set those things up at the dealer we went by Ugga Duggas

@TractorTimewithTim 4 жыл бұрын

Hence the problem of all of the bolts coming loose on dealer installed options. This is a HUGE problem on the Deere machines. Setup techs are not doing a thorough job of installing the dealer installed options.

@Cat3406e 4 жыл бұрын

Hence why I left... I don’t like half assing things!

@Cat3406e 4 жыл бұрын

My brand new 3025D was low on oil in the front axle and my brushog was dry and so weren’t the grease fittings

@8700I 2 жыл бұрын

Who made the theme song for you guys?

@TractorTimewithTim 2 жыл бұрын

a viewer from North Dakota or somewhere out west.

@unclinemanbful 2 ай бұрын

What size is the bolts..I only have a 21mm

@TractorTimewithTim 2 ай бұрын

Well, you’ll need an entire range of sockets and wrenches. Might as well bit the bullet :-)

@unclinemanbful 2 ай бұрын

@TractorTimewithTim I should've been more specific..I've got all the metrics up to 21..wondering how much bigger I'll need to go..

@TractorTimewithTim 2 ай бұрын

@@unclinemanbful I’m not sure. You should be able to try it. You have the tractor now?

@DonBoutin 4 жыл бұрын

John Deere dealer near me is closed during these times. Can anyone tell me the specs on those bolts. I had one snap off and I cant just got to the dealer and pick some up. Local tractor supply doesn't carry metric bolts.

@TractorTimewithTim 4 жыл бұрын

jdparts.com is your friend!

@edjanesherwood3067 5 жыл бұрын

Hi Tim, enjoy your videos. I also have a 1025R, a 2015 model. I would like to know what you think the RPMs should be set at while using the loader? I set mine at 2250-2300, but I'm not sure this is the best setting. What do set your RPMs at when you are moving material? Thanks, Ed

@TractorTimewithTim 5 жыл бұрын

That is fine, Ed. Don’t worry too much about this. Make sure you have plenty of rpm’s to get it done. These machines are made to run full throttle all day long.

@edjanesherwood3067 5 жыл бұрын

Thank you, love the show!