Jeep Wrangler TJ on 40's!! Complete Walk around

Рет қаралды 16,921

Күн бұрын

In this video i go Bumper to Bumper on my Rock Crawler 1997 Jeep Wrangler TJ with 40 inch tires and beadlocks. This thing has conquered Washington, Moab, Utah and Johnson Valley, King of the Hammers. I walk you through every part of my Jeep From the Body, Drivetrain, Steering setup, Suspension and the Interior. If you need more details about something, drop a comment or shoot me an email. Or better yet i probably already have a video with all the details!!
Subscribe to my new Channel Here!!
/ @muddybeardscrew
Check out our website: muddybeards4x4.wixsite.com/my...
Amazon Store: www.amazon.com/shop/muddybear...
Get 10% off your purchase at Barnes4wd with this link or use “muddybeards” at checkout
www.barnes4wd.com/?ApplyPromo...
Get your OnX Offroad Free trial and use Coupon code “Muddybeards” for 20% off your subscription. www.onxmaps.com/offroad/app
Get 10% off your Yes Welder purchase and using coupon code “muddybeards”
yeswelder.com/?ref=dVU5yUQ6
Yankum Ropes: yankum.com?afmc=1v
Get 10% off Olight Products, with coupon code “muddybeards44” www.olightstore.com/s/8A018Z
Get 12% off the Setpower AJ30/40/50 With the coupon code: “MuddyBeards4X4”
www.setpowerusa.com/discount/...
Tools I Use, MotivXTools: www.motivxtools.com/
10% off coupon code: muddy
www.setpowerusa.com/discount/...
DISCLAIMER: Due to factors out of the control of Muddy Beards 4X4, we cannot guarantee against improper use or unauthorized modifications of this information. Muddy Beards 4X4 assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Muddy Beards 4X4 recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Muddy Beards 4X4. Be safe! This video and description contains affiliate links, which means that if you click on one of the product links, we receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!

Пікірлер: 90

@Thatjeepguy1996 11 ай бұрын

That’s a real jeep! if it doesn’t have scratches or dents and you got a pretty painted frame and suspension parts get a jk lol

@AZOverLandOffRoad 2 жыл бұрын

Just picked up a jk 2 door, this jeep is my inspiration for that build. All stock for now, but not for long!

@MuddyBeards4X4 2 жыл бұрын

Awesome! Sounds like a fun project👊🏻

@SkyBlueOffRoad 5 ай бұрын

Those front springs have been put to full use since I got them from yall...Missing the TJ content, but I get it. Happy trails mate. If ya wanna hit up Evans or Elbe this spring, let me know. Would love to pick your brain on a couple things

@VictorVectorJKU 2 жыл бұрын

So many upgrades!!! 🤗🤗 I’ll be excited to see what you do for the high clearance front fenders!

@Bigdaddyslasher 2 жыл бұрын

Frame welded sliders are the way to go. I wiped out my passenger rocker on my JKU. Live and learn now I run frame welded sliders and I have bent those but they still work.

@caldider9954 2 жыл бұрын

Cool to see some Moses Lake footage! Mud flats are open right now.

@alderbottomoutdoors9794 2 жыл бұрын

I am building a scout II, so I can wheel elbe. Vids are awesome!

@zodiac8208 2 жыл бұрын

Finally!!!! Waiting for this video! Thanks

@MuddyBeards4X4 2 жыл бұрын

Haha, I figured it was about time.

@brandonq6373 2 жыл бұрын

Cool to see an everyday jeeper jeep stuff channel

@MuddyBeards4X4 2 жыл бұрын

Thanks man👊🏻

@DaddyJeepGarage 2 жыл бұрын

I do love my automatic trans as well

@kenworth278660 2 жыл бұрын

Impressive build 👏

@MuddyBeards4X4 2 жыл бұрын

Thanks🤟🏻

@btakin8737 2 жыл бұрын

As always great genuine gearhead video! My YJ 4.2 with a Magnaflow has a great smooth rumble OUTSIDE, OMG it is just a black noise drone inside. Interested in what you choose to make it it more enjoyable environment. I do get it , it’s a Jeep😝! Great content!

@MuddyBeards4X4 2 жыл бұрын

Thanks👊🏻

@Ben-lo7cy 2 жыл бұрын

That’s a great build man. I need to start welding so I can eventually do my own projects

@MuddyBeards4X4 2 жыл бұрын

Thanks man👊🏻

@williamshore3942 2 жыл бұрын

I would love to see u teach us how to do a front stretch! I can't find any good videos, explaining/showing the whole process, and different things to do/watch out for. I learn the most from your videos! Thanks for what u do!

@MuddyBeards4X4 2 жыл бұрын

Thanks man👊🏻 I am trying to do it without going full hydro or coilovers so it makes it more difficult. But I have some idea, hopefully I will be able to make it happen this year.

@williamshore3942 2 жыл бұрын

@@MuddyBeards4X4 that would be perfect! That's exactly what I was hoping to do myself. Maybe move the spring buckets forward? I don't know. Waiting to see what u come up with. Ty!!

@cgscprspecialist3937 Жыл бұрын

Love it

@Tbmx8 2 жыл бұрын

Bad ass Jeep Kelly, hope to see ya on the trails sometime here in Wa 🤘🏻

@MuddyBeards4X4 2 жыл бұрын

Thanks man, I will be out there all summer👍🏻

@ebalmes 2 жыл бұрын

I love the 12th man pokinatcha punk sticker on the dash. But you knew that already

@MuddyBeards4X4 2 жыл бұрын

Haha, yup.

@miniontj9497 2 жыл бұрын

Beast

@MuddyBeards4X4 2 жыл бұрын

Thanks🤟🏻

@thisguy7120 2 жыл бұрын

Massive 😊😊👍👍😊😊

@cole8557 Жыл бұрын

@muddy beards 4x4 Thanks for putting these vids together for us to follow along. Do you think a similar build would be practical on a yj? Considering the suspension and drive line are so heavily modified I would think there isn't much different between the two but I haven't seen many compact 40" yj build. Thanks again 👍

@MuddyBeards4X4 Жыл бұрын

Thanks, the YJ is a great platform, the frame, suspension and drivetrain are basically the same as the Tj, just the tub, interior, cage are different. So yes throwing 40’s on a YJ is basically the same amount of work as the tj.

@Ryan_Tidwell 9 ай бұрын

Kelly, I have been watching you and Nate for a while now. Love your content ! I want to put 40's on my TJ but I'd like to keep it as narrow as possible. I'm looking for 1 ton axles. Seems I can get all different widths. What is the narrowest axle you would use to run 40's ??? Also any preference on Dana 60 vs Ford 9"?

@cbr6864 2 жыл бұрын

My favorite upgrade is my body mount lift. It’s amazing how just 1.5” makes maintenance so much easier

@YONNY93 2 жыл бұрын

Hey Man, did you ever end up using the new winch remote the control box came with? If not, how'd you program your old one? Mine busted and was thinking of ordering just the remote but could't even get my buddies control to pair with my winch and HF hasn't been much help.

@jk_wrangler13 2 жыл бұрын

Nice!!! I'd love to get a 95 yj and turn it into a mean machine like yours

@MuddyBeards4X4 2 жыл бұрын

Thanks.. do it!!👊🏻

@jk_wrangler13 2 жыл бұрын

@@MuddyBeards4X4 just as soon as I can get the money I will.

@DaddyJeepGarage 2 жыл бұрын

Check out my DaddyJeep Garage channel for some good YJ action. :) Mine does have a lot of similarities to Kelly's kzfaq.info/love/oXxx7fbRKnS4YAtuWZtt9w

@cvuedoo9608 2 жыл бұрын

You should have a beard made out of mud logo

@stevenbadillo2977 Жыл бұрын

Hey made that is a sick Jeep. I just bought my JkU Sahara. I installed 3.5 Metal Clock game changer lift kit and HD steering. All new fox shocks and steering stabilizer. I would like to know what locker I should invest in. I live in central florida and would love to go off roading but honestly have no clue. Could you give me some adobe

@jamesws08 2 жыл бұрын

Hello. Random question; I’m working on a 72’ hp44 for my rubicon. Do u know if 78-79 Ford F-250 hi steer knuckles, (8lug), can be used with F150 (5lug) hubs, rotors, spindles, & brake brackets on the hp44??

@jeepindave5464 2 жыл бұрын

Im still bummed to see the ax15 go, but since its strictly a trail rig it make since completely. Hopefully robbie doesn't sell out on the trail plug lol.

@MuddyBeards4X4 2 жыл бұрын

Haha, he is sticking with the manual. But after one ride in my Jeep he became a believer in the auto…

@ivanbarguez286 2 жыл бұрын

Hello 👋🏼, question..I have a manual 2007 jk with a 2.72 non rubicon transfer case. Will the auto transmission rubicon 4-1 transfer case from 2007-2011 directly bolt on? Are they interchangeable?

@jamesws08 2 жыл бұрын

No response on high pinion d44 ford knuckles eh? Thanks anyway

@jeepspeednate 2 жыл бұрын

Do you still use the stock AC compressor for compressed air? I would love to see a video on that if you do

@MuddyBeards4X4 2 жыл бұрын

It is all still there. The a/c compressor died a while back so it no longer works. I have been using a Smittybilt compressor for a while now and plan on redoing the whole onboard air setup. Future video for sure.

@dronetrooperfpv7810 2 жыл бұрын

I have had my 02 TJ in Red with the 4.0 and auto for many years now. Bone stock. Yours looks pretty much how I want mine to look. Do you love the 40’s or would you do something different?

@MuddyBeards4X4 2 жыл бұрын

I wouldn’t go back to smaller than 39’s or 40’s now that I have built it up to handle that large of tires.

@paularbon5810 2 жыл бұрын

I don’t think you are going to get much hate about the automatic, anybody who is serious about their Jeep knows it offers way more control. I would convert your a/c pump to on board air. If you want to swap transfer cases I would start looking for a Dana 300 and flip it . Front stretch is a pain and going coil overs will make it way easier than keeping the coils. Basically you are taking about my YJ. Maybe you should do a walk around of my Yj.

@MuddyBeards4X4 2 жыл бұрын

The a/c pump has been converted to onboard air for more than 10 years. The compressor just went out on me a few months back. The Dana 300 and everything to flip it with gears and everything is very expensive almost not worth it. Just getting an rubicon tcase or atlas at some point.

@paularbon5810 2 жыл бұрын

I must have missed that your already had your a/c converted. Dan 300 can be done on a budget.. flip ring is 100 bucks. A case usually go for 4 to 5 hundred. You can make your own shifters pretty cheap as well. People get caught up in needed HD output shafts and gearing and that’s when it starts to add up. I bought my 300 with a 4:1 gear set for 650. Rubicon cases are pretty expensive now. The cheapest I’ve seen was 1200. The 2nd low and the ability to do front digs make the 300 a good case. If I bought a new t-case now I would probably buy the midnight metalworks 300

@erichughes9098 2 жыл бұрын

😎👍

@topgun2877 2 жыл бұрын

how much would you charge to build me your trans?

@job38four10 2 жыл бұрын

So whats to keep small rocks flying off those rear tires going down the road breaking my windshield..........

@MuddyBeards4X4 2 жыл бұрын

It’s a trailer queen. So your windshield is safe

@Jeff-wu6wn 2 жыл бұрын

What front coil springs are you running? and spring rate? how do you like them?

@MuddyBeards4X4 2 жыл бұрын

Metal cloak 4.5” lift dual rate springs.

@samsanderson7159 2 жыл бұрын

Are you happy with that genright tank? I'm planning to go 14 bolt on my 99 so I need to make space. I really don't want a fuel cell, but I want to make sure I have room for a stretch in the rear.

@MuddyBeards4X4 2 жыл бұрын

It works fine. The only reason I did it was I got it cheap used. They are too expensive and this particular tank doesn’t give me as much stretch as I would like. I would probably go fuel cell recessed in the tub down flush with the frame and build something around it so I still had some storage back there if I had to pay full price.

@samsanderson7159 2 жыл бұрын

@@MuddyBeards4X4 thanks for the feedback. That tank is a lot of money. It's hard to justify when compared to a cell. I'm just having a hard time with the fact that there won't be much space left in the TJ after I do it. I like your idea of a recessed cell though. I think I'll explore that option a little more.

@kodybuchenroth532 Жыл бұрын

How did you modify that stock seat?

@MuddyBeards4X4 Жыл бұрын

Made a video on it. kzfaq.info/get/bejne/mpZjdsiB1NS0aJs.html

@JZ-be4ns 2 жыл бұрын

No sway bar in the rear?

@MuddyBeards4X4 2 жыл бұрын

Nope, I might put one on, but they are expensive

@jbhk7977 2 жыл бұрын

Thanks for sharing. I have a question regarding the rear axle. Why did you chose a Ford 9.0 over a Ford 8.8? I'm looking to swap my rear axle, but over here in the Netherlands, a D44 of Ford 8.8 is priced it's weight in gold. However, a Ford 8.8 is still cheaper, but needs more fab work. I'm not a rock crawler, most of the time it's dirt/sand. Would a Ford 8.8 hold up running 35's? Thanks mate.

@MuddyBeards4X4 2 жыл бұрын

I ran the 8.8 for years, it was a great axle and I never had an issue with it. I even ran it with 40’s. So 35’s will be just fine.

@jbhk7977 2 жыл бұрын

@@MuddyBeards4X4 Thanks for responding so quickly . . . Keep the vids coming, I love them.

@DaddyJeepGarage 2 жыл бұрын

The Ford 9" is in many circles the best axle ever made. In the hard core 4x4 world it isn't quite the best, but darn close. It has tons of options and even in factory form is super strong.

@milesff7 2 жыл бұрын

Ford switched from 9 inch, to 8.8 because the 9” is too reliable, believe it or not. The dealerships need work, so they needed to find a product that was 95%. Drag racers pretty much exclusively use them.

@mobgarage1418 2 жыл бұрын

Dave's Customs Unlimited Jeep TJ boatsides

@MuddyBeards4X4 2 жыл бұрын

I have been looking at those as a baseline to build off of, I will get to it eventually. It cosmetic so it is low priority, lol.

@cbr6864 2 жыл бұрын

Insane build if I had to guess $30K into it

@MuddyBeards4X4 2 жыл бұрын

Thanks🤟🏻 It’s more around 20k maybe under. That’s with selling old parts to buy new parts, lol.

@jeepdude82 2 жыл бұрын

What’s your wheel mount surface on the front and rear axles?

@MuddyBeards4X4 2 жыл бұрын

65”

@jeepdude82 2 жыл бұрын

The rear coilovers probably wouldn’t have fit with narrow axles?

@MuddyBeards4X4 2 жыл бұрын

Nope, it barely fits now. The tires rub the coils just slightly when flexed all the way out.

@jeremy8715 2 жыл бұрын

How do you like your steering system? Any idea how that would be on the streets / highway (i.e. 0mph - 75ish mph)??

@MuddyBeards4X4 2 жыл бұрын

It’s great offroad, I have driven a bunch on road as well maybe 55-60, and it is ok. The nature of heims and the drag link mounted on top of the tire rod gives it some play. So I wouldn’t recommend for something that sees a lot of street driving.

@heavymonty 2 жыл бұрын

did i miss it? what is the wheelbase?

@MuddyBeards4X4 2 жыл бұрын

Haha, yes. There was a lot to cover. It was in the first 2 min. 98” is the current wheel base.

@heavymonty 2 жыл бұрын

@@MuddyBeards4X4 thanks! My TJ is 99" on 42s. Love it for all the wheeling I do (snow and mountain trails)

@2011rubicon 2 жыл бұрын

I use to see and hear that the 9” was no good as the wheel bearing retention wasnt great and couldnt handle big side loading? Have your heard the same?,is it a myth?

@MuddyBeards4X4 2 жыл бұрын

Love the 9”, great platform for strength and lots of aftermarket support.

@2011rubicon 2 жыл бұрын

@@MuddyBeards4X4 so have you ever heard of this side load issue?

@MuddyBeards4X4 2 жыл бұрын

Not really. Here is a good article. Don’t necessarily believe it the strongest axle out there but it’s good info. www.motortrend.com/how-to/9-inch-ford-rearend-strongest-rearend-due-hypoid-distance/

@2011rubicon 2 жыл бұрын

@@MuddyBeards4X4 fantastic, great all rounder and full of features! If you and Nate haven’t had wheel bearing issues they should be good!!

@DumbCarGuy 2 жыл бұрын

You forgot something important. I want to see how you get into your driver's seat. Leg stretch, arm pull, grunting ass hop to the seat maneuver with 40s and a lift. Then again because you forgot the keys.