Mugen Gen 3 + NRG Quick Release Upgrade w/ Working Horn!

Mugen Gen 3 + NRG Quick Release Upgrade w/ Working Horn! - 9th Gen Civic Si DIY INSTALL

Рет қаралды 4,543

Күн бұрын

Пікірлер: 30

@StayLurking 10 ай бұрын

Links to parts here: Mugen Gen 3 Steering Wheel: jhpusa.com/products/mugen-350mm-racing-3-steering-wheel-black-leather-red-stitch NRG Short Hub: amzn.to/3tcFCCV NRG Quick Release 1.5 Gen: amzn.to/454y02D NRG Airbag Resistors: amzn.to/3Qa0umu Steering Solutions Plate: thesteeringsolutions.com/products/ste-910gh?variant=41961744105631

@ianbenjamin7997 10 ай бұрын

You couldn’t have posted this at a better time I just bought the same setup with a different wheel and stoked there’s a video

@StayLurking 10 ай бұрын

Nice. Good luck!

@kewadgnahc5131 10 ай бұрын

🔥🔥 that setup!

@StayLurking 10 ай бұрын

Thank you sir!

@calamityking1532 9 ай бұрын

Total around $800 - $850 for all the parts (excluding shipping)

@gabrielvelazquez7046 2 күн бұрын

Just did this exact same set up to my 9th gen, but for some reason I’m hearing clicking sounds when I turn. I’ve tighten it all down, all my buttons work but the sound is still there. Anyone have any suggestions why ??

@StayLurking 2 күн бұрын

Might be the wires/clips inside the hub that are moving when you turn. I had a clicking sound when I turn and it turned out to be one of the connectors being able to move. Taped it down, and sound went away.

@matrickscfw 10 ай бұрын

real men die without airbags 😂😂

@aldrincesa7817 2 ай бұрын

Where did you connect the horn

@fb2javii999 10 ай бұрын

Love this steering wheel as well could u tell me where u got ur rectangular rear view mirror or link it please i need one 😎

@alcidesmaravilla3720 10 ай бұрын

Can you show how you wired it ?

@StayLurking 10 ай бұрын

I didn't have to wire anything, besides the horn, which is just a ground and power wire that can be easily connected as they are supplied by NRG. & I just reused the OEM harness from the steering wheel.

@stephensingh6180 7 ай бұрын

Hey just wondering if all the rest of the cars airbags got disabled because of removing the steering wheel one

@StayLurking 7 ай бұрын

No, because I installed the Airbag resistors

@ulisesdiaz5086 5 ай бұрын

How long did it take for you to get steering salutation plate after ordering

@calamityking1532 2 ай бұрын

Does your steering wheel make a crunchy noise when turning it? Any solutions for it? I tried taping the Bluetooth connector but it seems to still be making noise

@RalliartDylan 2 ай бұрын

I’m having the same issue, for me it’s the white connector and the shorthub because there’s not enough clearance causing it to sit unevenly, what shorthub are you running?

@calamityking1532 2 ай бұрын

@@RalliartDylan Im using a steering solutions hub, haven't really figured it out, kinda got used to it this point because other guides usually have them remove the clockspring itself which I'm not planning to do.

@RalliartDylan 2 ай бұрын

@@calamityking1532 everyone else having this same issue is running the steering solutions hub, I’m going to buy the nrg one tomorrow and let you know if it fixes it, the clicking doesn’t bother me but when the wheel recenters after a turn there’s a bit of resistance which is really annoying

@MartinTorres-hk3lg 6 ай бұрын

Did you have issues with clock spring when mounting short hub

@StayLurking 6 ай бұрын

No issues.

@MartinTorres-hk3lg 6 ай бұрын

@@StayLurking I got the same set up when I finished up when turning my wheel clock spring clicks so what’s happening is where the wires go in at the bottom clock spring sits unevenly and that’s causing the issue

@RalliartDylan 2 ай бұрын

@@MartinTorres-hk3lghey bro how did you fix it? I’m having the same issue when I tighten it all the way?

@RalliartDylan 2 ай бұрын

@@MartinTorres-hk3lgstill looking for a fix pls help 😭