Just did this exact same set up to my 9th gen, but for some reason I’m hearing clicking sounds when I turn. I’ve tighten it all down, all my buttons work but the sound is still there. Anyone have any suggestions why ??
@StayLurking2 күн бұрын
Might be the wires/clips inside the hub that are moving when you turn. I had a clicking sound when I turn and it turned out to be one of the connectors being able to move. Taped it down, and sound went away.
@scox63611 күн бұрын
Would the rear brembo's fit the 9th gen as well?
@StayLurking5 күн бұрын
A custom bracket is needed in order to fit the rear brembos and maintain the ebrake function.
@scox6363 күн бұрын
@@StayLurking Okay cool, I was wondering because I bought a full set of these Brembo's and planned to sell the rears, however I'd prefer to fab them to my 9th gen.. Thanks!
@tonyli731713 күн бұрын
Man! You moved on from FB I didn't even know where you went after you sold your EP lol. Nice work! I'm planning to get a FA5 in the future and started looking at mod list, somehow stumbled upon your video! I think this setup might work on FA5 or even EP3 as well. But with bigger brakes comes different brake booster I think? What do you use for your booster after this setup?
@StayLurking5 күн бұрын
Hey Tony! Hope you're doing well. Yea, I'm still alive! 😅 but yes, this setup will work on the 8th,9th,10th gens. I believe the EP and rsx as well, but don't quote me on that. I ran it fine with the 9th gen OEM booster. But i'm sur changing it out to a bigger will only benefit
@tonyli7317Күн бұрын
@@StayLurking thanks for the info man! Hope all is well on your side as well! I just bought a pair from AutoZone with 20% discount lol. I remember one guy from socal EP3 installed the same setup as yours, so I think you are right!
@ignaciovega850015 күн бұрын
You can use montegi traklite 3.0 wheels aswell 17x8.5 +35 👍🏽
@jaysupras242115 күн бұрын
Yoooo I’m super late but I need your help!! What headlights do I need?? Where’d you buy everything ?
@ianmorales550016 күн бұрын
Are you able to run oem brake hoses? Or which do you need?
@StayLurking5 күн бұрын
I'm running stoptech stainless steel hoses, but OEM hoses will work just fine.
@marcossergio555820 күн бұрын
where did you buy it?
@01maverickjfАй бұрын
That ain’t no 2012 civic si
@nerfiasjust4461Ай бұрын
Bro, good job! Really good job! I want to ask you, does the headlights from facelift version and front bumper form restyle you can please just like bolt-in? no additional reworks to put those on?
@tonychau1983Ай бұрын
Did you have to cut the shroud?
@White_Type_RАй бұрын
Did you ever wire up the heated mirrors? I just bought some and was wondering how you would wire the heated mirrors
@rs3tuber425Ай бұрын
Great brake kit for the street and some spirited and short autocross but the caliper still has piston booths although they are better than your average car booth because at least they are silicone. Unfortunately they don't stand a chance for a road course, for that you will need straight precision cut pistons made of high temp alloy. When I say precision cut piston what I mean exactly with this is that the whole(bore) in the caliper is so precise that the piston fits perfectly without getting dust inside and for that you are talking forged calipers. I recommend either AP racing, wildwood or stoptech trophy model, all 3 brands have no piston booths. I personally had stop tech and Brembo GT, not to be EVER confused with the lower tier Brembo sports that MOST factory cars use. Just to summarize, these brake kit is beyond excellent for most people, that is all you will ever need to street, spirited driving and small auto cross but neither the stockfish brake pads nor the booths will stand a chance. The paint will also turn brown because this calipers are simply aluminum and nor forged. Thanks for the video by the way.
@gabersonnnАй бұрын
Would this work on an 8th gen ??
@mikepina-j1491Ай бұрын
I know this is old but did you use the ep3 front calipers or had to switch to Rsx also ?
@crizmplays8699Ай бұрын
Where you get it ?
@crizmplays8699Ай бұрын
I want the visors 😭😭😭 is it too late?
@TubzoonraugXyoojАй бұрын
Hmong wives do everything.
@abrahamlincoln7766Ай бұрын
How much did you spend overall on the build?
@Jonysmoky_2108Ай бұрын
Hey how's it going these look fire they're so clean. Where did you get them at ??
@bryandarksideАй бұрын
will it work on a 11th gen civic?
@michaeljames12902 ай бұрын
What’s the silver bar on rear end
@ivanngarc2 ай бұрын
Where could I find that bumper and trunk spoiler?
@calamityking15322 ай бұрын
Does your steering wheel make a crunchy noise when turning it? Any solutions for it? I tried taping the Bluetooth connector but it seems to still be making noise
@RalliartDylan2 ай бұрын
I’m having the same issue, for me it’s the white connector and the shorthub because there’s not enough clearance causing it to sit unevenly, what shorthub are you running?
@calamityking15322 ай бұрын
@@RalliartDylan Im using a steering solutions hub, haven't really figured it out, kinda got used to it this point because other guides usually have them remove the clockspring itself which I'm not planning to do.
@RalliartDylan2 ай бұрын
@@calamityking1532 everyone else having this same issue is running the steering solutions hub, I’m going to buy the nrg one tomorrow and let you know if it fixes it, the clicking doesn’t bother me but when the wheel recenters after a turn there’s a bit of resistance which is really annoying
@aldrincesa78172 ай бұрын
Where did you connect the horn
@he4rts2 ай бұрын
so new wing fenders headlights hfp kit ? am i missing anymore
@95Scents2 ай бұрын
I have a 12 so it’s a 1 year model very hard to find aftermarket I had to get my headers made specially for my lx
@RicardoCalderon32122 ай бұрын
The KZfaq algorithm failed me. Just last week I put brand new EBC rotors and EBC brake pads for my stock caliper setup. For just a little more I could've done this?! Ugh, thanks for the great video. I am gonna be thinking about this forever now!🤣
@J_Stark_272 ай бұрын
Dopeeee
@parkermacdonald71242 ай бұрын
I wanna take mine off so I’m just gonna watch it in reverse
@mauricerobinson44802 ай бұрын
What offset are you running because because I did the set up on my car, but my wheels cannot fit I’m running 18 x 8 1/2 with 35+ offset so what offset do I need to get for the wheel to fit without spacers?
@StayLurking2 ай бұрын
Although specs are an important factor in clearance for the bbk, many people often overlook the spoke design, which is just as critical and needs to be taken into consideration as well. I mentioned all the specs at the end of the video. 17x9 +27 but this doesn't necessarily mean that another wheel in the similar specs will clear. Hope that helps.
@angelmejia19152 ай бұрын
Did you find out what offset would be needed?
@JdsCooked2 ай бұрын
How did you get the bumper to fit I purchased one and the mechanic is telling me that it will not fit on my 2014 Honda civic ex l sedan?
@StayLurking2 ай бұрын
You'll need to run the 2012 Civic sedan front grill with the UAE/Asia bumper in order for the UAE/Asia front bumper to fit properly on your 2014 civic. The bumper will fit without the grill, but you're going to have an empty spot in the front of your vehicle. 2013-2015 front grills are different and will not fit the UAE/Asia bumper..
@JdsCooked2 ай бұрын
@@StayLurking thank you the mechanic told me that he couldn’t get the number to fit the car without the grill
@XeroDash02 ай бұрын
Can I use a different rotor that is 320 mm or does it have to be Nissan 3rd seating?
@StayLurking2 ай бұрын
I believe you can, but don't quote me on it.
@XeroDash02 ай бұрын
@@StayLurking thank I’ll try and if not just send it back
@angelmejia19152 ай бұрын
How did it go?@@XeroDash0
@ivanngarc2 ай бұрын
I am looking for that rear bumper that looks like it has a diffuser, how to I find it? I can’t
@gallardo200002 ай бұрын
No BMC upgrade? mushy pedal?
@Jaykalibavevo.2 ай бұрын
total bullshit bro the ballast can’t work with these projector lens
@KIDJaico2 ай бұрын
Where you got this from ? It looks fantastic !
@vermontvermont92923 ай бұрын
Just got one for my 10th gen.
@james95itr3 ай бұрын
Where did you get the hub centric rings?
@Redx3003 ай бұрын
You still on Megan coilovers?
@StayLurking3 ай бұрын
Yup!
@Jaykalibavevo.3 ай бұрын
led bulbs can’t work with there projectors very lame sorry i purchase
@nanocash893 ай бұрын
Does this work on a Exl 2012 coupe
@StayLurking3 ай бұрын
No
@thirtyfivekansei3 ай бұрын
What do you need to do this conversation?
@JuliusmX3 ай бұрын
Does it matter if it’s rear or front calipers
@StayLurking3 ай бұрын
Yes, it does.
@ivanncastro3 ай бұрын
Bro those fast brake kit brackets are steel or aluminum?
@StayLurking3 ай бұрын
I believe they are Aluminum, but don't quote me on that.
@titanthao3 ай бұрын
Does this shifter come with any hardware to button it down?
@StayLurking3 ай бұрын
I bought mine used so it didn't. I'm not sure if hardware is included for a new unit.
@user-du2cr1dv4g3 ай бұрын
❤❤❤❤❤❤❤very nice car. What size are those rims
@alextsao44493 ай бұрын
Great build, color combo very classic Honda racing! I have a question as I'm stuck undecided as to which to choose from situation. I have RL calipers with brackets setup to go on my 7g Accord coupe but seeing this makes me curious about the Brembo options. Was there a big performance difference in your experience (between RL vs Brembo Genesis)? And what was reason for changing? Pad choices? Thanks in advance
@ExoticMario3 ай бұрын
I want the UAE badly but I wish they have one without the front plate mount
@foId3 ай бұрын
Tpms gives me ptsd every time and I’ve only owned my 9th gen for a month