You are back in the arena, great news and fun tool time with sator rotas, nice one👍

That is so cool. Should do the trick. Thanks for sharing.

Good review. Thank you. Excellent safety comments too!

Good to see you back. A great review of this very versatile tool. It does a lot of processes! Thank you.

Hi Pascal. Good to see you again my friend. This is a very interesting video, and I agree the machine needs more safety features 🙂👍

Awesome video my friend nice saw good unboxing good stuff great job thumbs up 👍

Hello Pascal glad to see you have returned i think this is a pretty handy machine but should definitely have a guard that covers the blade completely like a full size table saw does especially if it runs when running the chuck i have looked at these also I would like to have a small chop saw for brass and aluminum stock

Enfin de retour 👍 sympa cette petite machine ...

Looks fairly dangerous to me! And cutting with the sliding miter gauge, and the other end of the wood against the rip fence is just asking for super dangerous kickback! But removing the fence also removes the blade “protection” (its a stretch to call it protection!)! This was a great, honest review! An Amazon find I guess?

Great video. I look forward to your video on the solutions. This baby was just delivered this afternoon. I haven't put it together yet. Your review was most timely!

Looks like a useful tool for what it is. Good luck hope you get the dust under control 👍🏼👍🏼

Congrats to the new saw... great to see you again

really nice and looks like a great tool for Hobby and more, excellent review and test.....thumbs up my friend and many greetings 👍👍

Handy tool. I like the sanding feature.

Good morning Pascal! Great review! Be careful with that thing! 👍😲👍

Nice review my friend, welcome back

Awesome little machine, i call these saws “widow makers” hahaha, i have had so many close calls with my fingers and bits of wood come flying back, everytime i counted my fingers after using it 😅 great video my friend 👍🏻

Hi there, thanks for showing the item, helps a lot to imagine how small the item is when I have never seen or owned such a mini saw. At the 10 minute mark, you were showing the wood kicking back, that's actually because you're touching the wood you are pushing through the blade to the wall to the left. If there was no wall, the wood would just be sitting there and not kicking back towards you. Rule for table saws, and I think this is the same too, to not use both the wall plus the mitre to cut anything, as the saw continuously spins and the wood will get pushed to only one direction when being in contact with the saw. The wall gives another point for the wood to be leaning against and pushes to you. If anyone were to need to cut a longer piece than the 7 cm length, it would be far safer to take out the wall on the left, and just use the mitre while wearing safety glasses.

Nice video welcome back sator rotas good to see you again buddy have a nice day friend 😎👍🏻

Hooray.!! Pascal is back.!! Very good review, solid return to KZfaq.! Glad to see you back my friend.!!

Bonjour Pascale ! Super test, Soyez prudent avec cette Multi-functional table saw!😜👍

Great video welcome back buddy good to see you again sator rotas have a nice day friend 😊👍🏻

Buena maquina, te facilitara bastante la construccion de tus dioramas.👍🏾

nice to see again friend.

Pascalll!!!! Welcome back to you tube buddy. Missed ur content brother 👍 hope u sorted ur other projects out. I no ur been bizy doing other stuff. Awesome video on the lathe an issues there are. Brilliant. 👍 😊 👍 bro.

Hello, do you have a link where you bought it

Hi Sator, Did you come up with a solution to the saw blade cover? I have a mini trim saw I mainly use to cut small pieces of gemstones to size before I facet them. I would like a cover over the blade to prevent water from splashing onto my face when I am cutting the stone.

Hola Sator qué bueno saber de ti nuevamente espero y te encuentres bien de salud,😎 y que buena herramienta para tus trabajos, muchas felicidades 👍

Ah, you’re back. Missed you.

what a great tools to have

salut😁👋, sa fait un bail😅. dsl🙏. mais sa fait plaisir de retrouver tes video👍👍. par contre tu es sur que c'est en vent libre ce truc😱. enfin surtout la scie. le coté ponceuse dremel me plais bien🤩. merci du partage et á bientot, bonne soirée Pascal😃✌✌

Very nice mini tool for the hobby, you need to hold it with clamps to the table and use a wood block as a support for the sanding disck 🔵🔵🔵👍👍👍✔️✔️😀😀🔵🔵🔵

That is a very cool multy function machine I like it but they fact that there is no protection on the cutting disc and the depth is not adjustable that would but me off . Glad to see you back 😊

Hola Pascal Amigo 👋. Me alegra mucho saber de ti 💪. Buena maquina, se puede hacer de todo 👌y para tus trabajos se vé genial 👍. Que pases un buen día 💃Un saludo cordial desde España 😎🚗💨💨💨🤝💨💨🇪🇸

It was so good to watch and hear your intro again. If you were to mount your cutting deck upon extended uprights, could you perhapd end up with a more conventional saw height without making the machine too top-heavy?

good job 👍

I'm in the UK, where do you get the sanding belts and cutting disks from as the both seem odd sizes and I can't seem to find any of them?

nice sharing buddy.

Yes a video, been a long time since the last. Wow that's a finger chopper, so many ways to cut oneself. I'm with you covers on the 3 sides, the guide is very loose could be better. Then no blade adjustments that could have been done like a Skil saw. The sander disc a direct mount better as it seems so far from the table and no surface in front for a flat sand.

sympa, pour la decouple et le ponçage

Building a jig/sledge to sit on top of the unit would give a zero clearance cut and also lessen the height of the blade.

Looks like the plexy kickback shield prevents you from properly supporting the material on the binding side of the blade. And increasing the risk of kickblade. The desighn could really use a better safety mecanism.

nice tool👍

I was thinking of buying for fun, but thanks for the review, I will look for something safer instead.

Is this a home avaiabe in the UK and what’s the approx price. Best regards

How to use the extensible tool

❤muito legar essa mini serra. Vc saberia me dizer qual a polegadas do mandril w si suporte de lixa? Grata

I guess this product doesn't have a height adjustment - which is why you are cutting a 1 inch tall piece of wood with the blade at 1000 inches

I ORDERD ONE but it has 1 cutting blade only not three instead iwas sent set of tiny tools i did not asked for

Well Pascal. First of all it is great to see you back in action.. :) I have to agree with your review on this machine. Has a lot of awesome features but (in my opinion) no real thought went into actually making it. You of course have found all the issues with this machine. Unfortunately it is not a matter of "if" you will get hurt on this. It's a matter of "when". With the belts all exposed under there as well. YIKES. Thanks for sharing bud and again great to see the name pop up in the videos.. :)

I am a hobbyist and I came across a Vevor mini table saw but for some odd, and poor advertising, they don't show complete pictures of their kit. So that's what brought me here and now I have a full idea of what their kit can do. So thank you for posting your video. The video was very clear. That said, and this is just my 2 cents and no offense intended, why don't you just narrate instead of hand gestures and without background music? I think you'd be able to explain certain things better. But, its just my opinion. Thanks again!

Excellent

Now I understand better why you upgraded this machine, it was really too dangerous. It is very practical and it does not take up space but in terms of security it was really not at the top. Very buy and great video 👍

Hey Pascal I wanted to let you know Stevo D passed away and I will try and get that camper out one day this week been super busy stay safe my friend 🤟🏼

The miter box is not assembled right.

Nice little tool

This looks very dangerous, nobody should be using a table saw without a riving knife and without being able to adjust the blade height. Very dangerous.Also, if you use the mitre gauge to push the wood through the blade then you do not need to use the fence, one or the other, not both. That is why your piece of wood was getting stuck between the blade and the fence. Very dangerous. Next time, remove the fence. Good luck to you!

where ya get it from and whats it called?!?!?!?!?!

Like you say definitely needs some improvements. But after that should make a fine Little table saw. Do you have a link for it? Great work again my friend👍🏼😁

The slider protractor should be facing you. It is backwards

Waoo meja gergaji mini multifungsi rekomendasi untuk membuat kerajinan tangan

Ha ha cool, I observe that you could do a brushless conversion quite easily.

Hi. Is it the saw can adjust up and down?

👍 👍

Mini table saw 👍👍👍👍👍

Saw disc outer and hole size

I would simple remove the saw blade when not in use.

I've never seen such a small table saw. It has so many other options included. I can see, you need to work with safety in mind. It looks fairly heavy duty. Yes, they should have covered the sides as much for safety as keeping the area clean. You have a good plan going forward👍Like 54

Hello Pascal. Handy machine for a handy man,but be careful,it can be dangerous as you say. Conclution...not for me..hahaha

I think you have the mitre gauge backwards. LOL!

bonjour like bonne video gg

Sad - you have a ruler that one cannot tell whether it measures in inches or centimetres or what

NEVER use the fence and the mitre guage together on any scale of tablesaw. One or the other. Never both. Cheers.

What is the name of the model? Why is it not in descr or title? Awful.

Sorry pal but it seems to me that you need a bigger piece of kit for the larger pieces you want to cut !!!!

In the hospital yet??

So what make and model is it? Basic information completely missing! 😳👎

reviews have spoken words not music

NOT A TOY!

Video muy largo y aburrido. No llegué a ver ni un minuto.

Странный какой-то пользователь! Зачем обязательно надо одновременно и Патрон и пильный диск использовать? Сними параллельный упор и режь рейки любой длины. Сними транспортир и оставь параллельный упор и режь фанеру!

No more sign language if you lose a finger! Which in that case is almost like losing your tongue!! 😛🩸🩸🩸