Multi strand copper wire bracelets by Flatwearable Artisan Jewelry

Рет қаралды 107,390

3 жыл бұрын

Check our Facebook page for how you can purchase jewelry made by Suzanne. / flatwearableartisanjew...
Follow along as I teach you how to create gorgeous multi strand bracelets out of simple copper wire. If you don't want to make the twisting jig we have them available for purchase. www.flatwearable.com
Many of the items used in the video are linked below.
Butane torch on Amazon, www.amazon.com/Lighters-Kitch...
EZ jump ring maker on Amazon, www.amazon.com/Beadalon-Round...
Copper wire on Amazon, www.amazon.com/s?k=copper+wir...
Annealing pan on Amazon, www.amazon.com/recocido-sart%...
Engraver on Amazon, www.amazon.com/Neiko-Handheld...
Center finder www.flatwearable.com
Center punch www.flatwearable.com
Center drill bit www.flatwearable.com
Power max flush cutters www.flatwearable.com
Jewelers saw www.flatwearable.com
Polishing compounds www.flatwearable.com
MyTFlux, color-coded solder chips, jewelers silver solder, rotating soldering platform, third hand, solder pick, honeycomb board, Upins www.flatwearable.com
Disc cutters on Amazon, There are MANY choices in varying price ranges, www.amazon.com/s?k=disc+cutte...
Disc cutter at Harbor Freight, www.harborfreight.com/hand-to...
Dapping set at Harbor Freight, www.harborfreight.com/hand-to...
Divider with other measuring tools on Harbor Freight, www.harborfreight.com/6-piece...

Пікірлер: 76

@jdavidbaxter 3 жыл бұрын

Wow, as a former bench jeweler, I found this video very informative. If I had the tools, I would definitely be able to follow your tutorial and make one of those. Great video!

@luziferkupfer 3 жыл бұрын

I just started the video to have quick glance at the copper bracelet, but the intro music drew me in, and your presentation and explanations kept me watching the whole video. Great work and great video!

@wolfmom21fl52 Жыл бұрын

Just out of curiosity... Why did cut the jump rings instead of just leang them uncut and soldering the coil together?

@Ghostwriter69 3 жыл бұрын

Clearly one of the best tutorials I've ever watched on this topic. Very detailed and well thought out. I'm a new subscriber!

@omari5701 2 жыл бұрын

Incredible tutorial!!! Thank you for going through all the detail. One of the best tutorials I've seen on anything!

@FlatwearableArtisanJewelry 2 жыл бұрын

You're very welcome!

@SaltyWackyPotato 3 жыл бұрын

This is like the best demonstration I have found to be useful for what I want to do, Great job

@RicardoGarcia-104 Жыл бұрын

Jus wanna say thank you for these amazing video with soooo much information you have really help light a fire in me to get creating these awesome pieces of jewelry for my self and maybe to one day make some side money. Thank you very much for taking the time to teach us these steps and tricks of the trade.

@meggweeg7005 3 жыл бұрын

Me to.love power tools. sister power!! ha ha i love my dremels/rotary tools. too. i own like 4 dremels/ 4 drills. mega screw drives! 8 hammers. from jewellery ones, to framing and i even taught myself to weld. thanks for the video. I love copper. and i also make cutlery jewellery.. try that.. awesome jewellery!!

@dirtybird1933 3 жыл бұрын

I've learned, to get a uniform twist in your multiple wires, figure how long you want each strand to be, get that much wire for how many strands and how many sections you want, twist it all in one go, then cut to length, uniformity is best that way. And it makes the end product look that much better

@cmjudco 3 жыл бұрын

This is beautiful!!

@kimbercole2438 Жыл бұрын

really nice job ! I can use this to practice my soldering and get a great bracelet too? Thanks for sharing!

@barblarson7410 3 жыл бұрын

Wow, that's a lot of info packed into an hour! Beautiful work.

@valkobranislav 3 жыл бұрын

Perfektná práca....👍👍👍🌲🌳

@rickbailey7183 3 жыл бұрын

Very well done instructional video! Thanks!

@aidahnamusoke576 2 жыл бұрын

Thx for the lectures.

@larryrichards3668 3 жыл бұрын

Thank you, very good video and explanation of each step.

@johnriley8314 2 жыл бұрын

Very cool,I learned ALOT . Great Info IMO......Rather Long video....but informative for a beginner as me lol....I'm gonna be gettin into this homemade jewelry stuff and some pours as well. Thanks

@tammygurl64 2 жыл бұрын

I am so envious of your power tools and shop! 😄

@amygipple827 2 жыл бұрын

These are awesome, thank you!

@FlatwearableArtisanJewelry 2 жыл бұрын

You are so welcome!

@margaritapatino4246 Жыл бұрын

Tutoriales de alanbre y verdaderas joyas exelentemte de conprender muchas gracias GramEmma Patino de Iowa

@jennifermanning2934 3 жыл бұрын

This was very informative and well presented! Thank you!!

@FlatwearableArtisanJewelry 3 жыл бұрын

Glad it was helpful!

@chepemoncada4705 3 жыл бұрын

Bonito trabajo

@bthomasx 2 жыл бұрын

Excellent video

@FlatwearableArtisanJewelry 2 жыл бұрын

Thank you very much!

@tammygurl64 2 жыл бұрын

I was not thrilled with 14+ ads that I had to watch to see this video (I suppose it's the price of "free" LOL!).😟 HOWEVER, it was an EXCELLENT TUTORIAL and demonstration 👍 and you did a great job explaining some of the things I wish had been explained to me when I first started making jewelry. I was wondering though if there would be less waste if the holes on your twister jig were closer together or would that not produce the best twisted result? Just curious before I give it a try. 🙂 Anyway, again... very good tutorial! 👍 Thanks so much for sharing! 😊

@mikegentry9082 2 жыл бұрын

Can brass/brazing rod be used? Interested in how the contrast would look. Very nice video/info. Easy to understand. And I can stress this enough....thank you for providing useful camera angles and zoom. Awesome

@FlatwearableArtisanJewelry 2 жыл бұрын

It isn't something I've used for jewelry but I don't see why it wouldn't work.

@rhaven50 3 жыл бұрын

Nice

@jitendrabdarji6098 3 жыл бұрын

Yes

@trasure435 3 жыл бұрын

I do believe her theme song should be Ray Stevens, “Power Tools.”

@Crimsonjewel1 Жыл бұрын

TYVM for the lesson on soldering! I currently use a little hot iron, as I only do jump rings at this time.

@yakovsara 2 жыл бұрын

First of all I loved your video, secondly what solder do you use and how do you stop the copper from tarnishing.

@FlatwearableArtisanJewelry Жыл бұрын

I use both silver solder and copper solder. We sell several types on our website. www.flatwearable.net/home/soldering-station/

@chanalowenthal3897 3 жыл бұрын

Can you use a hand crank with a chuck and a chuck holding the wires in the vise?

@FlatwearableArtisanJewelry 3 жыл бұрын

So long as you can keep the wires taught that should work.

@edgarscale 3 жыл бұрын

i just looked up keiga wire cutters and they are now discontinued by the manufacturers. might be able to buy off of riogrande or somewhere like that. it figures the good stuff gets discontinued. good video. keep up the good work,

@FlatwearableArtisanJewelry 3 жыл бұрын

We carry them on our website. www.flatwearable.net/home/twist-it-up-bracelet-jig/

@maladylis08 3 жыл бұрын

Where did you get color coded solder ? Great bracelet, thanks for the tute !

@FlatwearableArtisanJewelry 3 жыл бұрын

We carry it on our website. www.flatwearable.net/home/soldering-station/

@maladylis08 3 жыл бұрын

@@FlatwearableArtisanJewelry how cool ! Wish is was wire instead of pallions but I'll get some in time. Thanks !

@Eldormen 3 жыл бұрын

just to make sure. the sader is the same as you would use on sterling right?

@FlatwearableArtisanJewelry 3 жыл бұрын

Easy silver solder would work fine

@caryk60 3 жыл бұрын

great video....do you ever do a 10 foot or so copper strand at once?

@FlatwearableArtisanJewelry 3 жыл бұрын

You wouldn't get an even twist from end to end.

@RicardoGarcia-104 Жыл бұрын

Jus wondering y you pickle pot after annealing not most do it that way was trying to figure out the difference. Thank you

@FlatwearableArtisanJewelry Жыл бұрын

Annealing creates fire scale which needs to be removed.

@chanalowenthal3897 3 жыл бұрын

What size hole are you putting in the disc? Do you need different size holes for different size wires?

@FlatwearableArtisanJewelry 3 жыл бұрын

1/8". You can drill any size holes you would like.

@Anywhere72 3 жыл бұрын

would be faster to use wood with a 3 inch hole saw

@lindacreatore1628 2 жыл бұрын

When you annealed the twisted wire, did you roll it into a bundle as before? TY!!! Great video!

@FlatwearableArtisanJewelry 2 жыл бұрын

Yes I did

@nobackhands 3 жыл бұрын

what size holes did you drill?

@FlatwearableArtisanJewelry 3 жыл бұрын

About 4mm

@LadyWilowbilly 2 жыл бұрын

Could you use dead soft wire?

@FlatwearableArtisanJewelry 2 жыл бұрын

absolutely

@dennismitchell5276 6 ай бұрын

Live wire would be shocking.

@CaptainNemo49 3 жыл бұрын

What type of pickling pot ??

@FlatwearableArtisanJewelry 3 жыл бұрын

A small crock pot from a thrift store

@georginahemi-wharekawa1395 Жыл бұрын

Isn't it a compass? Or do others call it a divider???

@FlatwearableArtisanJewelry Жыл бұрын

Technically, a compass is a drafting instrument that has one pen or pencil point and one sharp point that is positioned at the center of the circle to be described, while a divider, on the other hand, has two sharp points, one for the center and the other for scribing or marking.

@meggweeg7005 3 жыл бұрын

I used bullet ends on one.. made it for a male customer, he didnt buy it. and too big for me to wear. will make another one, for myseef now...

@wayneswenson8890 2 жыл бұрын

Can these bracelets be purchased?

@FlatwearableArtisanJewelry 2 жыл бұрын

Check our Facebook page for how you can purchase jewelry made by Suzanne. facebook.com/FlatwearableArtisanJewelry

@moneykills 2 жыл бұрын

do you sell these? if so I'm interested!

@FlatwearableArtisanJewelry 2 жыл бұрын

Yes, you can message me at suzanne@flatwearable.net

@inneczasy4913 2 жыл бұрын

40:05 What is this?

@FlatwearableArtisanJewelry 2 жыл бұрын

Copper jump rings

@inneczasy4913 2 жыл бұрын

@@FlatwearableArtisanJewelry How do you connect copper? What's in the box labeled "H"?

@FlatwearableArtisanJewelry 2 жыл бұрын

solder

@lexthy286 3 жыл бұрын

Nice tut, I think. Didn’t make it to the end, though. The amount of commercials is just rude. Dim it, girl!

@FlatwearableArtisanJewelry 3 жыл бұрын

We have no control over the amount of ads shown.

@omar3omar410 3 жыл бұрын

Nice

@jitendrabdarji6098 3 жыл бұрын

Nice