Best Logic Pro channel hands down.

Josh! How cool was this video. I have struggled for such a long time with automation! But I am truly lost for words now! At last! I understand! I can do it! All thanks to your superb, concise and easy to follow tutorials. This one is bang at the top of my saved ones from you and just know I’m gonna be referring to it all the time.

This is GOLD! Thank's a lot for that bright, clear and straight to the point vid !!

This was super helpful. I've been fiddling about with automation and making a mess. You helped me get a better grasp of how this works. I'm going to have to watch this a few times, and I'm subscribing.

I shifted from cubase to logic , your tutorial videos are helping me alot , You’re a saviour man thanks a ton 💕

Click-and-hold, then hold control while moving the automation to slow down and better control the movement... you always include a detail that blows my mind!

Watching your tutorials always inspires me to open Logic... i appreciate these very much!!! 🔥🔥🔥

Cor josh, great works, this really clarified a lot for me, what a genius tool Logic is.

thank you so much for this video! i've encountered such helpful videos like this where every detail is explained in an easy way! ❤

man, I just started using logic last month, this video has been really really helpful , learned a lot. Thank you

Muy buen trabajo, y muy valioso. Gracias!!!🙌

Amazing lessons! Thank you!

I thought I knew what there was to know, but I was mistaken! So much more! Especially about automation of SENDS and EFFECTS. Great instructional video. I agree -- best Logic Pro channel in the 'verse.

THANK YOU!! Extremely helpful!

Been a fan for years. Great videos .... that master fader tip.....💯

Absolutely great as always, thanks !

Thank you for these videos! 👍🏻

Great video as always! A fast shortcut for using the Automation Curve Tool: when using the Pointer tool in the Automation lane, hold control shift and the Pointer will turn into the Curve Tool

youre the best josh! ive watched so many of your vids that i feel like we're friends! stay cool!

I learning from you a lot! Thank you!

That Touch thing for automating plugins is golden, ty!

Excellent, as always! The big takeaway for me was accessing automation on plugins. Thank you!

Thanks for this video. Unreal there is not that many well articulated Logic Pro demonstrations.

Good stuff, man, thank you!

Dude this was so helpful! Thanks for the video!

There is a better way to select an automation parameter instead of switching to touch and back to read: Mix -> Autoselect Automation Parameter in Read Mode

Very useful, thanks!

That THIS has been very helpful 🙏🏾🙏🏾🙏🏾

Great content! Thanks so much!

As usual Fantastic. Thank you so much. 👏👏👏

17:20 FINALLY i've been looking EVERYWHERE for this answer. also i was searching exactly there but for some reason i didn't see the little arrow next to main lol. thanks!

Everything I needed to know and more.

Fab! Thanks so much.

damn this guy is badass!!! thanks for your help and contribution to the music production industry!!

Insanely helpful

Elite as always mate. Control click was what I was looking for, was struggling to get gain plugin back to 0dB straight away by dragging as the increments were too big on my laptop (small screen size). Learning plenty from you lad

Very useful vdo az usual...tanXxx a lot...lotzzz of love from India l🇮🇳..!!

Thank you my dear friend

It's knowledgeable important video 👍😊

amazing!

great video. really

Well, you just prove me how to make a perfect dj mixtape in logic ! thanks a lot 🍺🍻🍺

Wow, Josh! Had no idea how deep (offline) automation could go. This opens up all new avenues of mixing production for me. I’m looking forward to the next drop. 👍🏼 Gianni

A quite new topic for me. The only thing I used already is the Master fade-out. But the rest was is almost unknown an I must admit I didn’t understand everything. I will have to watch this Modul more often. In any case it’s very interesting. A 30th big „Thank you“. I think it’s very important to know much about automation.

w video thanks allot man

In this video, I demonstrate the following: 1. How to hide and show track automation. 2. How to use volume and pan automation. 3. How to use various tools to writing in offline track automation. 4. How to use aux track volume and send level automation. 5. How to use plugin parameter and software instrument parameter automation. 6. How to fade out a song with the master VCA. Support the sponsor of this video, Boombox | bit.ly/boomboxsponsor For mixing/mastering work, contact me at my website | carneymediagroup.com Follow MusicTechHelpGuy on Instagram | instagram.com/musictechhelpguy Support the channel on Patreon | patreon.com/musictechhelpguy Demo project used in this video | www.logicproguide.com/downloads Timestamps: 0:00 Introduction 0:53 Sponsor Segment 1:43 Volume Automation 5:26 Tools for Automation 9:39 Pan Automation 12:51 Multiple Tracks, Fine Adjustments 14:28 Aux Track Volume Automation 16:39 Send Level Automation 19:23 Plugin Automation 23:04 Software Instrument Automation 25:10 Song Fade Out (Master VCA)

For some reason I don’t feel the urge to skip the sponsor part on your videos XD. Been busy with life now I can get back to supporting my favorite teacher.

This is brilliant. I have a question. I noticed that you did not adjust the dial of a bus itself. I noticed that the dial of the bus opens or closes depending of the automatization. I always though that the adjustment of a bus's dial is only related to the amount of effect we want to be affected independently from the amount of automatizations we adjust. I hope this question make sense and thank you.

❤👍🎙

is it possible to automate switching a preset of a plugin? let's say I want to switch to a specific clean guitar tone from distortion tone without individually adjusting all the parameters in multiple automations. Is there a way to switch to already saved preset during automation?

Pro tools has a channel that you can create called master mix giving the user full control over all tracks to change the volume levels for each track at once with the slider, keeping your mix volumes in tack on each track. How do I find this and create it for a project in Logic 11?

Is there a way to adjust automation by smaller degrees? I find it jumps by, say, half a db or more at a time when dragging. Can I do it by 0.1 increments?

How do you raise & lower the volume of the entire track that you’ve applied automation to?

Once you automate the volume you can't use the fader anymore. In the past when I needed to bring the entire automated track down I'd add a gain plugin and use that. Is there a better way?

Do you have a video on how to "Reamp Guitar in Logic Pro X?

When you have volume automation on a track, then move the fader for that track in the mixer for an overall lower level, does it change the automation or does the automation take over and negate your new fader setting? I ask because sometimes I want to change the volume on all my tracks simultaneously if the overall mix is too loud (overload) or too quiet, while keeping the Master at zero.

how can i just turn an effect on for one bar, like a phaser on a guitar?

I want to automate a parameter of a plugin that I have on the Stereo Out. Doesn't seem to work there like on a track though? Any suggestions?

why does it keep making a spike when I drag down the automation point to make a square?

I'm a little let down that you explain everything in such detail but when you get to panning almost nothing. That's exactly what I'm looking for is a good explanation of automated panning. I need to take 3 tracks (in a stack, or individually) and go slightly to the right then 1/2 way to the left then hard right. And I still have no idea how to do this.

Man, this is driving me nuts. When I edit automation (in my case mod wheel for dynamics on a string library) and then move the mod wheel data up or down (vertically) it compresses the data... so as I move up, it increases the height between top and bottom of the data, and as I move down it decreases the height of the data. All I want to do is move it up and down without this compression! Is there a way to do that?

how do you make an automation square?

Does anybody know of a faster way to get to the specific parameter within a VST/effect? In Ableton Live you can simply click a parameter and it shows up in the automation lane. Do you need to go through the “touch” function to get there? I would love to just shift-click the parameter or something. It is just sooo fast in Ableton, and I want the same functionality in Logic 😅

Is it just me or Automation is clunky and like there is a delay on it compared to other DAWs I have a M1 Mac and even moving automation lines around are fluent. Am I doing something wrong ?

Why are the pan numbers not the same? (63/64)

The demo file seems to have expired... :(