No video
MUST DO'S BEFORE YOU INSTALL YOUR TEIN FLEX Z'S
Рет қаралды 18,044
Күн бұрынWe have come to realize that not all consumers or shops for that matter will verify measurements on the products they receive prior to installing them. We strongly encourage you follow these steps to ensure that things are setup symmetrically before you install them. Check out our website for all your Tesla Suspension or EV needs!!!!!
www.zevcentric.com
zevcentric.com/products/tein-...
@lacamula1 9 ай бұрын
You guys are AWESOME 👏 ALOHA🌴
@MochiBoys22 11 ай бұрын
What's the torque spec on the top mounts?
@jean-francoisfortin710 Ай бұрын
Awesome video!! Need help on an information hard to find. I'm looking to raise my MX5 NC that has Flex Z's installed, currently at lowest setting. I know how to do it but the trick question is what is the minimum insertion I need to keep in the lower mount? I don't seem to have a lot of range, but can I have only 1/4 in or 1/2 inch?
@zevcentric Ай бұрын
We are Tesla specific so I dont have data for Miata. Please contact Tein directly.
@TeslaSoCal 3 ай бұрын
What STIFFNESS SETTINGS would you run for the Front & Rear on the TEIN COILOVERS?
@zevcentric 3 ай бұрын
we can review all these details after purchases are made from our website. That's all in the product support side of the company.
@stevenhendler3064 8 ай бұрын
@zevcentric Is the preload measurement ~245mm accurate for the RWD cars as well? I noticed the reference values are a bit different in the manual. I asked Tein and they said preload should be set close to zero but that setting doesn't work well.
@zevcentric 8 ай бұрын
no it's not. Please look at the instructions they provide. It's all in there
@stevenhendler3064 8 ай бұрын
@@zevcentric No mention of preload or that dimension in the manual.
@zevcentric 8 ай бұрын
@@stevenhendler3064 in the manual/booklet there are diagrams and measurements for setting preload. They have values A-D and a hunch of pictures for you to match your design of coilover with.
@meemudang 7 ай бұрын
What about rear shock damper adjustment?
@zevcentric 7 ай бұрын
Video releasing this week!!!
@LastWonBeats 2 ай бұрын
I have tein flex z on 2008 Acura TL, the front is bouncy, do I need to adjust the preload? More load on the springs or less?
@zevcentric 2 ай бұрын
Probably need to stiffen the damping.
@joeyjimenez7027 Жыл бұрын
What do you think of the overall build quality of these for daily driving compared to MPP or UPP?
@zevcentric Жыл бұрын
Totally different price points tbh. A lot depends on your desired ride heights and so forth. Can't really make a blanket statement. The MPP adjustables are stainless steel so they will withstand winters better for example.
@joeyjimenez7027 Жыл бұрын
@@zevcentric Really just looking to get a better quality ride over stock LR suspension with a slight lowered stance to fill the gap with 275/40/20 on with 15mm spacers all around. your thoughts?
@lagwag0n 10 ай бұрын
@@joeyjimenez7027 I can tell you the ride is better than stock. I just got my Tein's installed.
@teslafybc3450 23 күн бұрын
How much is the ride height lowered on a Model 3 with Tein's default reference values? Thanks!
@zevcentric 23 күн бұрын
Not sure. It's gonna be quite low though and the rear spring perch isn't even set. We always change it right out of the box to our own values. If you purchase from us and give us an idea where you want the car to be we can share those values.
@teslafybc3450 23 күн бұрын
@@zevcentric I bought a set of used ones which the previous owner purchased them from you guys. I have a 2022 M3P and just looking for a mild drop. Not too low as there are a lot of hills and inclines where I live. Thanks for the valuable information!
@zevcentric 23 күн бұрын
@@teslafybc3450 you should ask that person where it was setup. Maybe they have pics for you. If we installed it then we would have that data as well.
@TeslaSoCal Ай бұрын
Is it normal for the rear Coilovers to drop in height after driving the car? Mine keep dropping, not sure if my mechanic is setting it up the wrong way or what’s happening…
@zevcentric Ай бұрын
@@TeslaSoCal they do settle a good half inch since the time they are new. Suspension bushings should also be torqued under load. It can be attributed to wither of those or both. We always notify our clients up front of this and that suspension height needs to be reset once the springs have settled and a second alignment.
@TeslaSoCal Ай бұрын
@@zevcentric last time both my end links snapped because they set the height too low. Now they have set the height too high but the height is still sinking on the back left ? Is that typical after several thousand miles or do you think there might be another culprit?
@zevcentric Ай бұрын
@@TeslaSoCal I really can’t take a guess on that, but who was your installer?
@hamkaya 6 ай бұрын
May I know if tien suspension able to adjust higher than the oem height?
@zevcentric 6 ай бұрын
No cant
@daniloreyes2 3 ай бұрын
@@zevcentric will they get to stock height at least?
@zevcentric 3 ай бұрын
No sorry
Fitment Industries
Рет қаралды 373 М.
milanmastracci
Рет қаралды 182 М.
QAZSPORT TV / ҚАЗСПОРТ TV
Рет қаралды 661 М.
ZEVcentric USA
Рет қаралды 5 М.
Everyday Chris
Рет қаралды 65 М.