Must Have Tools for Beginners Learning Hand Engraving

Рет қаралды 9,528

Күн бұрын

This is my list of the top tools I recommend for beginners learning hand engraving on precious metal. Getting the right tools is essential for learning hand engraving. Sometimes, the right tools make the job much easier and quicker to achieve. If I was starting from the very beginning learning hand engraving again, these would be the ones I would get first myself.
❤️ Some of my tools mentioned in this video:
1. divider: amzn.to/3TgHK7K
2. scriber: amzn.to/3NmpV3k
3. thermo-loc: amzn.to/3Rf5o22
4. stainless steel ruler: amzn.to/3RbdlFq
5. nail polish remover: amzn.to/3RBscuf
6. pneumatic engraving machine: amzn.to/3tbVs1a
7. headband magnifier: amzn.to/3GzvMib
8. lubricant or cutting fluid: amzn.to/3R8suqY
💎Shop my handmade jewellery:
My website: huiyitan.com
Etsy: www.HuiyiTan.etsy.com
😀 Join my channel to give support:
/ @huiyitan
🛠️ Full list of all the tools I used in my videos can be found here:
huiyitan.com/collections/misc...
www.buymeacoffee.com/huiyitan...
👩‍🏫 Exclusive tutorials detailing all my personal jewellery making tips: www.skillshare.com/huiyitan
🎵 All music by Epidemic Sound: www.epidemicsound.com/referra...
📸 Instagram: / byhuiyitan
☕ Buy me a coffee: www.buymeacoffee.com/huiyitan
My microphone:
🇺🇸 amzn.to/3PhYM1T
🇬🇧 amzn.to/3rekyvr
My tripod:
🇺🇸 amzn.to/3PmtBm7
🇬🇧 amzn.to/3PkWMWG
My keyboard:
🇺🇸 amzn.to/3rqaH5D
🇬🇧 amzn.to/3PI3nvJ
My headphone:
🇺🇸 amzn.to/3sUFXdw
🇬🇧 amzn.to/44PRh80
My mouse:
🇺🇸 amzn.to/3RpCGgt
🇬🇧 amzn.to/3PGD2Ol
⏰ Time Stamps:
00:00 must-have tools for beginners learning hand engraving
00:35 the 1st tool
02:15 the 2rd tool
04:43 the 3rd tool
05:22 the 4th tool
06:34 the 5th tool
06:59 the 6th tool
08:23 the 7th tool
08:46 the 8th tool
09:29 the 9th tool
09:36 the 10th tool
09:52 the 11th tool
10:01 the 12th tool
10:08 the 13th tool
11:16 the 14th tool
12:09 the 15th tool
12:53 the 16th tool
13:20 the 17th tool
❤️ If you would be so kind as to use any affiliate links in my descriptions, it won't cost you any extra, but will help me get some treats for my ducks and cat 🦆🦆🐈🐾

Пікірлер: 41

@pedrotome9119 6 күн бұрын

All your tools, are beautiful, well made, and can have other uses!! 😮😮❤❤

@beautgrainger147 Ай бұрын

The graverhone looks appealing for watchmaking gravers too

@viggizags 6 ай бұрын

For sandpaper I prefer the 600 grit polishing paper that has the felt back. It's not as aggressive as 600 grit aluminum oxide grit to remove burrs. And if I want to polish from there I go higher in grit to the thousands. The 600 is the grey colored one. And the ceramic files are really nice to fix any slips that a burnisher can't fix.

@roparzhlapprenti 3 ай бұрын

Really great video. I'm just starting to consider engraving (as a metal worker, i'd love to propose this kind of work/finitions), but i had a lot of questions about it. You answered almost all of them. Big thanks for your work.

@HuiyiTan 3 ай бұрын

I'm glad it's helpful! For hand engraving, you might be interested in this one as well: kzfaq.info/get/bejne/rspphbahlrfQm6s.html

@joserozay213 12 күн бұрын

So beautiful 😍 new subscriber fosho

@selvalss 6 ай бұрын

Thank you so much for taking the time and sharing this. Super interesting and informative. The best beginner information I've found. Have a great week.

@HuiyiTan 6 ай бұрын

Glad it was helpful! more to come, stay tuned 😉

@perttirasanen8967 6 ай бұрын

Hyvä video, Kiitos!

@K12Reversal Ай бұрын

Very nice and useful video,

@barbaracovey 6 ай бұрын

Good video, thanks!

@HuiyiTan 6 ай бұрын

Glad you liked it!

@EduardComan 6 ай бұрын

This answer more of my questions; very informative, thank you very much! :)

@HuiyiTan 6 ай бұрын

You're very welcome!

@makenchips 5 ай бұрын

If using any sand paper most likely in this application aluminum oxide or Automotive grade if you buy in sheet form on the back carefully later shipping tape on the back then cut your squares out or strips. Another method would be to Too Faced tape or contact glue the Sandpaper to tongue depressor or popsicle sticks is your firm surface to work with when done I always use a poly eraser to clean the surface I never use any fluids on my sand papers your sandpaper will last for a very long time also never press hard on your sandpaper let it do its job

@TimezUp23 6 ай бұрын

Thank you for sharing. This is good information

@HuiyiTan 6 ай бұрын

Glad it was helpful!

@TimezUp23 6 ай бұрын

@@HuiyiTan the baby oil got me. I haven’t been using any lubricant, whoops. Something that simple will likely help a million. The shots of you practicing your engraving were excellent.

@JustME-ft4di 6 ай бұрын

Excellent information. Thank you! Can you use a Micromotor with a hammer hand piece for engraving?

@Gojirafistful 4 ай бұрын

Learned a few things, the reusing silver trick is so smart. What angle graver are you using in this?Subscribed 👍

@FB94121 4 күн бұрын

Thank you so much for this video, it's so confusing getting started and your video helped me a lot. One question about the 2 engravers for beginners. You mentioned to onglette Nr 4. Is there a difference between the one for curved and straight lines? Or can you use the same?

@HuiyiTan 4 күн бұрын

They are very different from each other. I have online courses teaching how to make them cut on precious metals like butter. You can find them here if you are interested: huiyitan.com/products/making-onglette-graver-for-engraving-straight-lines

@TheSilverSmithsBench1 6 ай бұрын

I share your video links on my Discord Server for myself and others for learning.

@HuiyiTan 6 ай бұрын

thanks for sharing!

@salenas5249 Ай бұрын

Hello, I’ve been engraving for about a year, I mostly use 90degree and round engravers, I have the grs graver Mach at , anyways what gravers do you use for lettering like calligraphy type writing?

@makenchips 5 ай бұрын

Baby oil is just white minerial oil with a fragrent added, which you do not need! Why not try camellia oil instead. Your dropper bottle is the same system I use. I use 1 oz dropper bottles. Also, neddle bottles used by nail salons work perfectly. Columbus Michigan

@rcmoot 6 ай бұрын

I still chase and hammer. Like your video. Have you made a video , on transfering your design to metal?

@HuiyiTan 6 ай бұрын

this one is coming up soon, stay tuned.

@user-vq5th4fp5g 5 ай бұрын

Thank you for shareing. For the diamond wheels, which brand is your? May I have the links? thank you

@HuiyiTan 5 ай бұрын

📃 Full list of all the tools I used in my videos can be found here: huiyitan.com/collections/miscellaneous

@mikethompson9013 3 ай бұрын

Great video, I'm just getting started. You talked briefly about a vise, which one do you recommend?

@HuiyiTan 3 ай бұрын

I will send you the link once I have finished making the video about vice. For now, if you want to know, full list of all the tools I used in my videos can be found here: huiyitan.com/collections/miscellaneous

@HuiyiTan 2 ай бұрын

I talked about difference vises in this video as well: kzfaq.info/get/bejne/iL9kjbqIxsqcnIU.html Hopefully it helps as well.