MV Agusta Brutale 800 RR - Overview of accessories - CNC Racing, Evotech, Fresco Exhaust and more

Рет қаралды 12,764

Жыл бұрын

In this video, I give an overview of many the accessories that I have added to my 2022 MV Aguste Brutale 800RR SCS. If you have any questions, please leave them in the comments. If you have any of the accessories, let me know what you think about them.
Here are links to some of the accessories. The Amazon links are affiliate links, so I do get a small commission if you purchase them at no cost to you. Thank you for the support.
Fresco Corse Trio Exhaust: bit.ly/3xX2oP4
Evotech Performance:
Radiator and Oil Cooler Guard Set: bit.ly/3Ek6AvJ
Frame Sliders: bit.ly/3fTqyUA
Fork Sliders: bit.ly/3EkIXTO
Rear Axle Sliders: bit.ly/3tlXf08
CNC Racing Accessories:
Clutch Fluid Reservoir Cap: bit.ly/3tnr4gW
Rear Brake Reservoir Cap: bit.ly/3hzlYLC
Front Brake Reservoir Cap: bit.ly/3WPRN33
Brake Lever Short: bit.ly/3UP82eL
Clutch Lever Short: bit.ly/3A7i82K
Rear Wheel Nuts: bit.ly/3UuexnA
Sprocket flange Nuts M10x1.25: bit.ly/3WUP3RW
Rear Sprocket Flange: bit.ly/3A7tCDr
New Rage Cycle:
Fender Eliminator and Turn Signal Kit: amzn.to/3E1LuRz
Quad Lock Mount and Accessories:
Mount: amzn.to/3th03f3
USB Charger: amzn.to/3TspeWB
Wireless Waterproof Charger: bit.ly/3Eo2cvE
Vibration Dampener: bit.ly/3tivrK7
Amazon Accessories:
Mirrors: amzn.to/3Tn0QFD
Mirror Adapter: amzn.to/3TqCP0G
Mirror Hole Plugs: amzn.to/3A4TDDy
LED Brake Light Bulb: amzn.to/3UH2OSg
Accessory Lights: amzn.to/3O3EzvK
Switch: amzn.to/3DZHYH4
Healtech Brake Light Strobe: bit.ly/3WNllhX
Healtech Servo Delete: bit.ly/3tlRzmF

Пікірлер: 51

@english.ricardo Жыл бұрын

Cool man, excellent video and awesome bike. Congrats.

@mzgarage Жыл бұрын

Thank you! It's such a fun bike!

@checker3694 Жыл бұрын

Great review very enjoyable, I have a dragster and superveloce.

@mzgarage Жыл бұрын

Thanks, I still love the Dragster. I was going back and forth between the two, but the spoked wheels deterred me, but now every time I look at a Dragster I want one!

@beauclark8593 3 ай бұрын

Thanks for the video! I’m picking one up tomorrow and already want to do some of these same mods. Love the exhaust and how you added that color pop. Have you thought of doing the clear clutch cover with red or bronze clutch pressure plate?

@mzgarage 2 ай бұрын

Glad you enjoyed the video. I would love one of those, but I just can't justify the price.

@MrPressPhotographer4 8 ай бұрын

The Brutale 1000RR Nuremberg is the most beautiful bike.

@mzgarage 3 ай бұрын

I agree!

@JuistSurfer 9 ай бұрын

well done

@MotoNuks Жыл бұрын

Hi! I'm interested in seeing the modifications needed to install the NRC fender eliminators. Planning to get one as well. Thanks!

@mzgarage Жыл бұрын

Unfortunately my bike is stored for the winter so I can't make a video for a few months. If you have IG or FB you can message me on there and I can send you some photos that will help.

@danielgielchinsky6951 4 ай бұрын

Are you using the stock headers? How you polish the pipe on the right side of the bike?

@beauclark8593 3 ай бұрын

Just got the bike. Love it! Did you end up taking out the db killer in the stock exhaust before you changed it out?

@mzgarage 3 ай бұрын

I do not recall there being one that can be removed.

@Mr.Blessed. Сағат бұрын

Please make a video about the fender eliminator / Tell tidy install. Thanks.😅

@Drumminz777 Жыл бұрын

Hi I love your bike! May I ask you for your opinion. I am thinking of fixing rear axle spool sliders on my Rivale. But I also wish to put the bike on a left hand side paddock stand like you. My worry is damaging the rear wheel and axle in the event of a crash since I won’t have have any axle sliders. Is that a concern for you? Or is it just a trade off for having killer that look? Thanks in advance for your advice!

@mzgarage Жыл бұрын

I actually purchased the Evotech axle sliders and I like the look of it without them better, but with that said, they were really easy to install/take off. If you had to do it each time you need to put it on the stand, it's not that much of a hassle.

@airenabrera5205 Жыл бұрын

Thank you @MZ Very cool Man. do you still have the brake and lever clutch for sale? Im from Dallas. Im interested to buy it if still available.?

@mzgarage Жыл бұрын

Thanks! Yes, I do still have them.

@sabsterblaster Жыл бұрын

I placed an order for one of these in October 2020. Last spring I couldn't take delivery because of an injury. I love what you did with it. What are your feelings on the transparent clutch cover? I like seeing the fluid flow inside and spin like a washing machine...Anyhow great job and thanks for the video!

@mzgarage Жыл бұрын

Where are you located that it took so long to get one? I hope you're okay now to ride. It's such a fun bike, and thank you. I absolutely love the clear clutch cover and if it wasn't so quite expensive I would put one on. I have heard that it gets dirty on the inside, but I have never seen one in person for myself.

@antontan2880 3 ай бұрын

Looks great!! Looking at the turn signal kit, did you need to use something like resistors or another relay to make these work or is it a straight plug and play? Taking into account the original voltage that is used of 3.2v.

@mzgarage 3 ай бұрын

No, the OEM signals are LED so nothing is needed. They are plug and play. I am not sure if I mentioned it in the videon but I mounted them slightly different than they intended.

@antontan2880 3 ай бұрын

@@mzgarage , yeah you mentioned you mounted them differently and I will figure out the options to mount them similarly. I have tried other LED turn lights before though didn't achieve a normal blinking frequency using resistors, etc. As these ones work fine for you I will give them a shot.

@ComputermanAM13 4 ай бұрын

I suggest upgrading the brake pump to a brembo RCS

@patpat1758 Жыл бұрын

Hi thanks for sharing your mods. Just a question regarding the exhaust: is the heel guard mounted on the footpeg support or on the exhaust? I am interested in case I burn my boot as I will install another exhaust, the QD power gun. Thx a lot, V from Switzerland

@mzgarage Жыл бұрын

For this exhaust the heel guard is mounted to the foot peg. I think the QD power gun has a much larger shield available, and it looks like that connects to the exhaust itself.

@patpat1758 Жыл бұрын

@@mzgarage thx for your quick reply. Are you sure about the shield? I red on their youtube channel that nothing was planned, question of style 😄

@mzgarage Жыл бұрын

You know now that I think about it, I am thinking about the other exhaust that looks like the QD. The guard that I have should serve the same purpose. It's available on any of the sites that sell the Corse Trio Exhaust.

@dodgerboe Жыл бұрын

Love it… where did you get the paddock stand or what make is it ..?

@mzgarage Жыл бұрын

Thanks! It's a Pitbull stand.

@theo2fly Жыл бұрын

What fuel are you using...13.3:1 compression ratio.. I would have to use 110.. i am so on the fence... just a gorgeous street machine... great video

@mzgarage Жыл бұрын

Thanks! I use 93 in the US which I believe is different in other countries.

@gee4zfpv Жыл бұрын

would the red levers fit my 2020 Brutale 800RR SCS? And if so, do you still have them?

@mzgarage Жыл бұрын

I am pretty sure they are the same, and I still have them. I can double-check compatibility, it's been a while since I've looked.

@sword5938 Жыл бұрын

I have the same new rage fender eliminator. Are you able to make a video on what you did so that I can do the same to my 2021 brutale? Please make that video of what you did!

@mzgarage Жыл бұрын

Unfortunately, it took a while for me to get around to editing this video and winter is coming soon. There is a storm coming in this week, so I want to get my bike put away before it gets here. Did you have a specific question on where to cut the license plate bracket. You can message me on IG or FB and I can try and help.

@sword5938 Жыл бұрын

@@mzgarage Hey. Just need to know where you cut on the plate bracket, also did you have to do anything to the bike where you mounted it due it not fitting newer models? Sorry, I don't have FB or IG. I'll download it now though as really want to get this mounted as yours looks amazing. Whats your IG?

@mzgarage Жыл бұрын

instagram.com/reel/CiAstuCIH-Q/?igshid=MDJmNzVkMjY=

@mzgarage Жыл бұрын

I think I have the piece I cut off. I can send you a photo so you can see where I cut it. It doesn't have to be exact.

@Shers121 Жыл бұрын

@@mzgarage hi can you share the picture with me as well. I'll message you on instagram

@SinOne390 10 ай бұрын

I thought these had the see through clutch cover?

@mzgarage 10 ай бұрын

Clear clutch cover?

@SinOne390 10 ай бұрын

@@mzgarage there’s a video from MotoDeal reviewing the 2021 Brutale RR and it has a see through clutch cover where you can visibly see the clutch spinning. Looks badass. Probably a different region variation.

@mzgarage 10 ай бұрын

They are available after market. I think the only model that comes with it is one of the RC models.