Set up of Scoring Blade very simple on the WA6 , but should be similar on other saw's
Пікірлер: 30
@Bill.L.Carroll6 жыл бұрын
That's a really neat and handy feature. Never seen that before. 👌
@ManorWood6 жыл бұрын
I found that not much i cut need this if you have a good quality main blade. but I comes a standard on the WA6 so handy to have ..
@Bill.L.Carroll6 жыл бұрын
Manor Wood I guess it's one of those things you'd use and not really need all the time, rather than not use and need sometimes...
@davesharp19836 жыл бұрын
Thats a beautiful saw. One day i will have a shop. Site saw it is for now
@ManorWood6 жыл бұрын
Its so nice to finally own a sliding saw. but the track saw does work well and did me for years,..
@davesharp19836 жыл бұрын
Manor Wood yeah they do the trick for site work. I use makita gear tho
@gabrielmillan9205Ай бұрын
I need a video on how to remove the scoring blade. I can’t seem to remove mine.
@tundrawhisperer48215 жыл бұрын
Is that a “Rapido” style scoring blade in the WA6? Thx
@ManorWood5 жыл бұрын
no just the standard one..
@TheAlogoc3 жыл бұрын
Does scoring blade teeth ticknesss needs to be the same as on main blade?
@ManorWood3 жыл бұрын
Yep
@TheAlogoc3 жыл бұрын
@@ManorWood Thx, not using it much..
@jimpackard80592 ай бұрын
No. It should be a fraction thicker. I suggest you check an Altendorf manual.
@TAYLORCRAFTWORKSRivertablesАй бұрын
@@jimpackard8059 Correct according to my Altendorf manual. I guess this is to help preserve the teeth on the main blade, probably helps with even wear on each side of the teeth on the main blade as laminate is tough stuff. The fraction wider will be so small, it will be unnoticed. I have heard mixed opinions about this topic, Joiners like to be exact so will want exact width as the blade. Just bought new scoring blades for my Altendorf so im here to see what others are thinking is best. 0.05mm further out from either side of the main blade sounds a good place to start.
@jimpackard8059Ай бұрын
@@TAYLORCRAFTWORKSRivertables Altendorf are the experts on this subject. There are many reasons for this scorer thickness, one major one being that the main blade is wider in cut once it revolves at speed. Hence the fact that the rip fence is not set square to the blade.
@loanwood80533 жыл бұрын
Can you name your sliding table saw
@ManorWood3 жыл бұрын
? It’s in the title
@matzwoodland16656 жыл бұрын
How high can you Cut with IT with the Main Blade
@ManorWood6 жыл бұрын
Good question,I am not sure I think its around 5mm Max.. but its just to brake the surface not to cut really ..
@matzwoodland16656 жыл бұрын
I know about in Germany professionell woodworkers Like me Use those Kind of saws i was Just intressted how high you Cut with Your Main Blade sorry for my broken english
@ManorWood6 жыл бұрын
Main blade just about 130mm. with a large 400 blade fitted..
@matzwoodland16656 жыл бұрын
Manor Wood ive checked PDF Data From Altendorf they Type down 350 Blade 103 mm are you Sure a 400 Blade fits into this saw
@ManorWood6 жыл бұрын
You can fit a 400mm blade there is a small mod need but it very simple ...
@matzwoodland16656 жыл бұрын
Would you explain me how you do that
@ManorWood6 жыл бұрын
OK I will do a video on this very soon .. how do you find the WA6 ?
@matzwoodland16656 жыл бұрын
I find IT super i dont own one but i will buy one AS Soon i know those Kind of Special Things i will Soon make some Videos aswell to Join those woodworking Community would Love to Share my expericne and Projekts aswell even i am an kinda Young woodworker
@matzwoodland16656 жыл бұрын
And thanks U make a Video maybe you could do some review on IT