MX5 / Miata MK1 wheel arch and sill repair : 2022

Рет қаралды 44,666

Жыл бұрын

In this video we repair the wheel arch and sill / rocker panel on a Mazda Miata / MX5 MK1.
-
Music: Stay With Me by Onycs is licensed under a Creative Commons License.
creativecommons.org/licenses/...
/ onycsmusic
Support by RFM - NCM: bit.ly/2xGHypM
-
-
Music: Walking In The Sky - Nico Staf
Support by RFM - NCM: bit.ly/2xGHypM
-

Пікірлер: 82

@colinritchie1757 Жыл бұрын

This is rapidly becoming one of my "Must Watch" channels - For all MX owners - There is hope out there for our little rot boxes!

@yorkshirecarrestoration Жыл бұрын

Hi Colin and thank you :) its support from all our viewers that makes it all worth wile :)

@thedecliningcyclist3321 Жыл бұрын

This is one of the only channels showing sensible economical repairs that will keep these cars on the road and safe for years to come 👍🏻

@yorkshirecarrestoration Жыл бұрын

Thank you :) we do try to show good usable content that can be applied to everyone car that need Ms attention 👍

@angrywargamer8836 Жыл бұрын

Even though you brits have terrible and incorrect names for food your craftsmanship is excellent as always.

@yorkshirecarrestoration Жыл бұрын

Thank you :) we do appreciate your support :)

@JohnnieBravo1 Жыл бұрын

Geezus, I surely wish I had the skills you guys have!

@yorkshirecarrestoration Жыл бұрын

Thank you :)

@peterraymond3653 Жыл бұрын

Thanks for taking the time to make this video. I did a similar repair on my Nissan 200SX, lots of layers but now know what to expect when I do the sills on my son's MX5 track car. Top job and again, thanks for sharing

@yorkshirecarrestoration Жыл бұрын

thank you Peter , glad the video is of some help :)

@leeopenshaw9302 Жыл бұрын

Brilliant as always ,always look forward to seeing what’s happening next on the channel 👍👍the Kate bush singing was spot on😂

@yorkshirecarrestoration Жыл бұрын

haha thank you Lee, think i should stick to cars :)

@thomas.vitzak 5 ай бұрын

Beautiful repair 👍

@hoofie2002 Жыл бұрын

My lovely blue 20yr old NB lives here in a cozy garage in Western Australia and there isn't any rust anywhere on the shell. Thank god for warm climates and no salt on the roads.

@yorkshirecarrestoration Жыл бұрын

Yes it's the salt that kills them Graeme :)

@stephenvoisey1391 Жыл бұрын

Love these videos such talent 👏

@yorkshirecarrestoration Жыл бұрын

Thank you Stephen :)

@melbice9906 Жыл бұрын

My new favourite channel, brilliant work 👏👏👏🇦🇺

@yorkshirecarrestoration Жыл бұрын

Thank you , glad your enjoying the channel :)

@mix1806 Жыл бұрын

looks good to me!!

@yorkshirecarrestoration Жыл бұрын

thank you :)

@inuyasha_115 Жыл бұрын

Liked, subscribed, and waiting for the next few videos, this is a difficult task that no shop will do for me

@yorkshirecarrestoration Жыл бұрын

Hi, if you have a look back on our other videos you will see some similar examples, but next week this one should be almost finished :)

@jalopy2472 5 ай бұрын

This one didn’t even look that bad from the outside. Shows that even a little bubbling probably means bad rust on the inside

@markfoster7564 Жыл бұрын

The rust makes me ill…..I know that’s weird…..great work as always!

@yorkshirecarrestoration Жыл бұрын

Haha thank you :)

@user-od1ni6ng7l Жыл бұрын

大胆で思い切りなカット腐食した隠れた内部を的確に切り取り補修するのはビックリ‼️大胆でも正確に板金するのが凄い仕事が早い。

@yorkshirecarrestoration Жыл бұрын

ありがとうございました , google translated , thank you :)

@telabib Жыл бұрын

Without some internal rust treatment, like dinatrol injection, or something similar, it will just rust away again. Good welding job though.

@yorkshirecarrestoration Жыл бұрын

As we state on a lot of our videos everything needs protecting after work has been carried out , thank you for your comment :)

@magiQxx Жыл бұрын

if i could, id drive the 1500 miles necessary to have my NB professionally done by you😂

@yorkshirecarrestoration Жыл бұрын

Thank you for the compliment :)

@MrTonyBrooklyn Жыл бұрын

I had no idea that cars rusted so bad in the UK. It is very common here in the Northeast USA. Anyway another great video thank you!

@yorkshirecarrestoration Жыл бұрын

Thanks for watching!

@chucky2316 Жыл бұрын

I am in the UK my little Mazda 2 was a rot box steel wasn't that thick to begin with welded some patches in it and moved it on.

@stringsnare 10 ай бұрын

damn, this is wild. i learned from yt how to do body panel repair with bondo. this is the next step...wonder if i can find a place that will teach me to do this. this is so cool.

@ustimqx3786 Жыл бұрын

На видео отлично показано, то как не надо делать!!!)))

@yorkshirecarrestoration Жыл бұрын

Thank you for your positive input.

@jamienevill1768 Жыл бұрын

Reminds me of a mk1 I went to look at as my first one. Both sills were nothing but fibreglass and filler. Ouch! Suffice to say, I walked away from that one.

@yorkshirecarrestoration Жыл бұрын

yes there are two type of MX5 , the ones that have been done or the ones that will eventually need doing :)

@jimcameron4672 Жыл бұрын

Shaping the sheet metal is my favourite part of these great videos, can you tell me the size of the blue anvil you are using as I fancy getting one , I've been having a go DIY style since last year and want to improve ,thanks

@yorkshirecarrestoration Жыл бұрын

I will check with you and yes shaping metal is enjoyable :)

@jozhebermeomontero5116 11 ай бұрын

El Permatex que utilizás es a base de agua...

@sergiovargas2727 11 ай бұрын

Hi what type of welding machine is that?

@user-ft7du3go8d 6 ай бұрын

Ниче так . Но сварку бы еще настроил для хорошего провара

@46MOTO46 Жыл бұрын

299 ЛАЙК!

@yorkshirecarrestoration Жыл бұрын

Thank you :)

@lazyj4732 Жыл бұрын

What thickness steel do you use for the rear wings? We have 2 Mk1's, one needs a little welding to get it through the MOT, the other we are thinking of stripping right down and getting chemically dipped as it's in a bad way.

@yorkshirecarrestoration Жыл бұрын

the rear arch panels are prefabricated as you will see in the next video but the inners sill sections we have repaired in this video are 1mm and 1.2mm in thickness :)

@lazyj4732 Жыл бұрын

@@yorkshirecarrestoration Thank you 👍

@eddiecairns2623 Жыл бұрын

Yet another other great MX5 tutorial with some questions! 1) Are there still drip holes in the bottom of the sills to let the condensation out. 2) The inner vertical upright repair which was done with a complete plain piece off sheet metal with no access holes, how do you get cavity wax behind it and in front of it and behind the new inner sill covering it? Or is this a say 5-year repair rather than a full expensive restoration that is not justified as if you go looking for further problems you will find them, and the costs will skyrocket.

@yorkshirecarrestoration Жыл бұрын

Yes moisture vents through those holes, we also drill our own holes to vent more after we have completed the job. the cavity wax can be done through the grommet in the inner arch as it offers a lot of access, but again after repair we drill holes and inject the anti corrosive coatings after the job is done then insert rubber grommets.

@jalopy2472 5 ай бұрын

@@yorkshirecarrestorationwhere should I drill holes to spray cavity wax in an NA Miata?

@dynamicb7178 11 ай бұрын

what is that tool called use at 4:24 in this video?

@xlee888 Жыл бұрын

What's that tool on 15:27 called where you crimp the metal and make it bend?

@yorkshirecarrestoration Жыл бұрын

hi Lee , its a metal shrinker :0

@davidfrance2056 Жыл бұрын

Hello, Can you tell me what make the folder is on your bench. Thanks

@yorkshirecarrestoration Жыл бұрын

Hi David , the folder is just a generic one from ebay i think they still sell them but you can buy cheaper ones that attach to a vice and work very well :)

@frankgrimes8714 Жыл бұрын

Do you ever regret taking on a MOT repair? For instance its only a bit more money for the customer to use replacement panels and replace it back to as factory and saves you a lot of labor/headache?

@yorkshirecarrestoration Жыл бұрын

Hi Frank. Replacement panels can be purchased for these jobs and you will see in the next video we do use a panel that replaces the wheel arch and outer sill section but most of the time these repairs stretch bigger than the replacements that you can buy meaning you would have to fab your own anyway. Our videos are here to show you how to replace metal when panels aren't available.

@yorkshirecarrestoration Жыл бұрын

Also the inner wheel arch sections and under floor section you will see in the next video aren't available as replacement panels :)

@russellkerfoot5423 Жыл бұрын

I WAS VERY SURPRISED TO SEE YOU HITTING A HAMMER WITH A HAMMER. TWO METALS OF THE SAME HARDNESS WILL CHIP BITS OF METAL OF AT HIGH SPEED. HAS 30 YEARS HAS A TIN BASHER I HAVE SEEN A LOT OFF BAD CUTS AND PEOPLE CARTED OFF TO HOSPITAL WITH EYE INJURIES THROUGH CHIPS OF HAMMERS AND CHISELS.

@yorkshirecarrestoration Жыл бұрын

Iv been hitting hammers on hammers for over 26 years, never once have I had or heard of a hammer chipping or anything like, but I do understand your concerns, play safe :)

@Ranishmmukundan Жыл бұрын

Which types of welding is that mig or flux core?

@yorkshirecarrestoration Жыл бұрын

its mig with 100% o2

@Ranishmmukundan Жыл бұрын

@@yorkshirecarrestoration ❤️

@coreyposada Жыл бұрын

@@yorkshirecarrestoration You're using straight oxygen for MIG? Maybe you meant 100% CO2? If you are using oxygen only, can you explain why? Fantastic work! Just found this channel tonight. Thanks.

@yorkshirecarrestoration Жыл бұрын

@@coreyposada yes co2 :)

@deangriffiths8107 Жыл бұрын

I do wonder if you’ve ever said no it’s an unrealistic repair? I had a mini when I was a kid that I stripped in my dad’s garage. Got to the point I thought I need my dad, he came and had a look and said nah scrap it.

@yorkshirecarrestoration Жыл бұрын

Not really haha, most cars we do for customers that are uneconomical have sentimental value so money is never a factor :)

@neilbarnes3557 Жыл бұрын

I'm beginning to feel sorry for the tinworm, the way you guys keep digging it out and destroying its nests. It must be nearly getting extinct in Yorkshire!

@yorkshirecarrestoration Жыл бұрын

Haha we will continue to battle it Neil :)