There are two more videos on this sucker in my playlist. I went into it blind. Sometimes you just have to dig in and finger it out. 🏁🏁🏁🍻

@ColdStartGarage Even with the struggle you made it look fairly easy. Gave me more confidence as a diesel mechanic with 0 knowledge about boats. I know how you feel about that grommet. The simplest concepts can be made pretty difficult if you let an engineer design it

Found it in a doctors garage basement. Pretty mint machine

Sometimes I feed a piece of copper in and try to break it up. And use some solvents.

Thanks Sean. It gets 3 times harder when you film stuff. But fun was had by all

I would use an illustrated parts catalog that is provided somewhere online. I don’t recall which one I used. This video is becoming on the old side. But if you have the part number of the oring in question and the catalog that will narrow your search🏁🏁🏁🤘🏻

So Mike. Mine does the same thing. I let the motor sit for a good amount of time and took the bottom screw off the stern drive to check for water. Water would be at the bottom of it, if it was there. Only thing that dripped out was oil. Just a quick check. No need to drain the oil completely. But let me say one thing. I am no expert on this matter. I know enough to get myself into trouble and back out of it 🤣

The problem is this machine was pumping water earlier that week. But the plant mater that I flushed out must have swelled in there. This was a 4 part series. I bought the machine from a guy that had it in his basement garage for over a decade.

Yup there is a key. Make sure the impeller is installed the way you removed it. It has an orientation. Be patient and take breaks as needed. If you get to rushing you could up making a preventable mistake. I usually mess up that way and have to start over 🤣

I tried that. Mud bees plugged it right up!

Or an STD 🤣

I don’t have that data. But if you keep it out of the ketchup a 6 gallon tank will do just fine and have left overs after 3 hrs. I sold the rig the year after due to space. What a gem that Lund was/is

Just about 30mph. Scoots pretty good for what I need it to do 🏁🏁🏁

I can tell you did not view the whole movie. How do you get into your stern drive without disconnecting the gear selector? Or removing the bolts to the stern drive? 🤣 all jokes aside thanks for the view nonetheless! 🤘🏻🏁🏁🏁🍺

Thanks for the video retention. I appreciates that about you. Your mom didn’t tell me 11 mins was too long 🤣 family channel and all I suppose that was a bit crass! This was an earlier video of mine and I’m not an how to channel. Either way thanks for the view and the comment

Things that didn’t need to be removed Like what

Thanks for the view. Some people watch KZfaq for entertainment. Are you not entertained?