My Barn Find Honda CB750 FINALLY Gets A New Clutch!

Рет қаралды 15,851

Ай бұрын

My barn find Honda CB750 FINALLY gets a new clutch to replace the slipping original! After getting this bike running and riding I have ridden it over 3,000 miles which have been awesome but....only at 90% throttle as the original clutch would occasionally slip in 3rd and 4th gear at wide open throttle. It would also slip on bumps while accelerating. This was of course not ideal but never bothered me that much as I could still enjoy the bike to its fullest ability. Now is the time to change the clutch though as I wish to get this bike on the dyno in an upcoming video!
For this I used factory springs available from Honda, Partzilla, CMSNL, etc. I also installed new seals on the clutch cover as well as the clutch cover gasket itself.
Playlist on this bike: • Barn Find Honda CB750 ...
Seth's black CB750: • I Bought ANOTHER CB750...
Clutch cable adjustment video: • Honda CB750 Clutch Cab...
If you found this video helpful or simply wish to support the channel further feel free to donate to the "Tip Jar" via the paypal link below! Anything is very much appreciated!
www.paypal.com/donate?hosted_...
My second channel:
/ @tangentsbhb
Brick House Builds Amazon Storefront:
www.amazon.com/shop/brickhous...
Brick House Builds Ebay store:
www.ebay.com/str/brickhousebu...
For updates on this project as well as others be sure to follow along on all the Brick House Builds social media platforms!
Instagram - / brickhousebuilds
Facebook - / brickhousebuilds
Website - www.brickhousebuilds.com/
Tik Tok - / brickhousebuilds
#brickhousebuilds #barnfindmotorcycle #cb750

Пікірлер: 247

@mikeduffer6858 Ай бұрын

I'm a retired Lead A&P Mechanic from a Major airline. I think you are doing a great Job! Keep it up bro.

@BrickHouseBuilds Ай бұрын

🙏🙏

@Scooterdude01 29 күн бұрын

I'm retired from the aerospace industry, I never heard anyone referred to as bro. Think your full of smelly stuff.

@Scooterdude01 29 күн бұрын

Yeah bro where were you a lead a&p mechanic.? Hahahaha 😎

@BrickHouseBuilds 29 күн бұрын

@Scooterdude01 You haven't heard bro?

@rockbay79 Ай бұрын

I'm old enough to remember riding these bikes brand new. It warms my heart to see you younger men reconditioning these bikes! Much respect to you both! Love your channel. I remember when you first picked up this bike. You are really a Master Mechanic!

@BrickHouseBuilds Ай бұрын

Well thank you!

@tonysargent1699 Ай бұрын

Are you a motorcycle mechanic? Are you capable of modifying mechanical parts? The answer to both questions should tell you what you did to the clutch was "Mechanical Engineering" and fully acceptable. What did people do 50 years ago when parts were needed on the quick, ring a single supplier, order the part and have it delivered next day? NO, they did not! They modified what they had and got on with it! Sounds good to me! KOOOL!!!

@BrickHouseBuilds Ай бұрын

100%

@djantix1200 Ай бұрын

Forget the haters! Love your channel man! Keep wrenchin' and ridin'!

@BrickHouseBuilds Ай бұрын

🤘🤘

@johnashley9021 Ай бұрын

Don’t let the odd dick!! Rattle you. Love the Timelapse vids CB750F on the horizon 😜 😜 come on you need another project 😂

@NoCoastGolf Ай бұрын

I know absolutely nothing about doing mechanical work on older bikes, which is why I'm watching this video. I love these man. Keep it up.

@BrickHouseBuilds Ай бұрын

Glad you enjoyed!

@Joe_HamRadioGuy Ай бұрын

Nothing wrong with modifying a part to make it work. You aren't the first person to do it you most likely wont be the last. Nice bike for sure. Love the videos.

@BrickHouseBuilds Ай бұрын

🤘🤘

@laurencehastings7473 Ай бұрын

I watched this one and thought " it's running really smooth" . I'd been following the series but couldn't remember whether or not you'd done a top end rebuild so I've just binge watched the complete series yet again. An amazing transformation from an ugly, neglected, siezed bike to a fully functional daily runner. The only re-occuring issue seems to be that some of your viewers claim to be able to do things better. Quite possible, so I suggest they take the time and energy to make videos and put them on KZfaq. We all like watching good vids. Until that happens I and many thousands will continue to watch your videos and enjoy the content.

@BrickHouseBuilds Ай бұрын

Many thanks 🙏

@LeonardoCostaUSA Ай бұрын

Yeah man, you have got it!!

@wlingrell Ай бұрын

Love those old 750 Hondas. I had a 1972 when I was young. Love the sound of these old machines. Love your videos. Keep up the good work.

@BrickHouseBuilds Ай бұрын

NOTHING sounds like a sohc 750! Glad you enjoyed!

@martyndunn1905 Ай бұрын

If modifications work then it's all good in my book, love old retro bikes.

@BrickHouseBuilds Ай бұрын

If it works it works!

@grantottaviano7445 Ай бұрын

Let the haters hate, you are a knowledgeable moto mechanic. I’ve learned several things from watching you for my own CB750. And I agree with the Rotella T4, one of the finest motorcycle lubes out there, along with Chevron Delo.

@BrickHouseBuilds Ай бұрын

🙏🙏

@jimclarke1108 Ай бұрын

Felt like the old days on my CB750, great memories and ride😁

@johnnyrvf Ай бұрын

I'm 67. I rode my first CB 750 in '75. It was so good to hear that soft Honda 4 into 1 burble/growl whilst you were out riding again! Brought back many memories! As to the clutch friction plate mod, stuff 'em, those that complain would freak at the mods I've done to my KZ 900 LTD! ( The model hit with the ugly stick ).

@BrickHouseBuilds Ай бұрын

🤘🤘 Glad it brought some good memories!

@MarkKoekenbakker Ай бұрын

Dear good guy, Don't let a few curmudgeons drive you crazy or ruin your mood, commenting on everything. They are not worth it and you don't have to defend yourself like that. From what I see (and I've seen a lot of you), you deliver craftsmanship and I would have no problem feeling safe on a bike that has been serviced by you. Greetings from the Netherlands

@BrickHouseBuilds Ай бұрын

Much appreciated! I'm getting better at just ignoring most of the curmudgeons but this guy was throwing a temper tantrum lol

@Cochise6-6-6 Ай бұрын

Been wrenching for 20 years now, I see nothing wrong with your work, thanks for the great content brother. That clutch mod was slick

@BrickHouseBuilds Ай бұрын

Thank ya!

@NoSlogan Ай бұрын

Tinfoil instead of corrugated Teflon for drippings!!? Never use that! I should know I'm a pizza mechanic. Screw the haters. They don't have a channel. This channel has been a wealth of knowledge and resource for me and the bikes I wanna build. Keep it up!

@BrickHouseBuilds Ай бұрын

Hahaha thank ya!

@terryturner681 Ай бұрын

Those sounds bring back memories I had a 1974 green.

@BrickHouseBuilds Ай бұрын

Oh man I want a green one!

@barryjackson123 Ай бұрын

Great work. And awesome tip with that retainer plate going back in. It is a heart breaker to get to that one last little snug up to hear the snap. One thing I'm going to try next time as well is to paint mark the location so the orientation is the same as it is removed just in case there is a slight wear pattern that could cause a slight bit of binding.

@BrickHouseBuilds Ай бұрын

Yeah I have seen so many people break the pressure plate because of this. Definitely sad

@robertcollins4685 29 күн бұрын

I'm a retired automotive mechanic and I approve of all your methods. Keep up the good work! You know more about bikes than i ever will.

@BrickHouseBuilds 29 күн бұрын

Well thank ya!

@airmotivewelding8012 Ай бұрын

I am a 25 year A&P, IA and I think your doing a great job. Skills are evident hoss.

@BrickHouseBuilds Ай бұрын

🙏🙏

@cainbeeping8480 Ай бұрын

Love the sound of that bike.

@kencreten7308 Ай бұрын

Oh man... this into looks great. Every time I hear the 750 Four...

@BrickHouseBuilds Ай бұрын

Definitely nothing sounds like them!

@henryhawk978 Ай бұрын

Nice work, BJ. The pair of 750"s going down the highway together was a very nice 👌. RIDE SAFE OUT THERE!

@BrickHouseBuilds Ай бұрын

Much appreciated Henry 🤘

@leon0 Ай бұрын

Now for a constructive comment. Patty is for patina. I get it. But rust is nobodies friend. It eats away at ferrous metals if left. So whilst the dents on your points cover are part of the history of this bike, it's patina, the rust on your clutch cover will likely worsen over time of left. How about just giving it 2 mins with a soft cloth and some metal polish to get rid of the rust there. There will still be patina staining and maybe some light pitting after but it will be stable that way. Best wishes ... 👍

@upsidedowndog1256 Ай бұрын

I have been an aircraft mechanic since I was 20, but fixed motorcycles since I was about 12. 54 today. You do fine by me. The total FAA approved aircraft would never get off of the ground!

@BrickHouseBuilds Ай бұрын

🤘🤘

@bobcarry4820 29 күн бұрын

As a real old man I was always forgetting my signal lights. I opened the headlight shell and wired in a pizo electric buzzers. Works well until I forget my hearing aids. Keep up the good work.

@BrickHouseBuilds 29 күн бұрын

These originally came with the loud turn signal buzzers!

@andrewashman3333 Ай бұрын

Great stuff - sounds beautiful !

@BrickHouseBuilds Ай бұрын

🤘🤘

@AidanH1 Ай бұрын

Modifying the clutch plate - great job. Improvise, Adapt, Overcome. Awesome.

@BrickHouseBuilds Ай бұрын

🤘🤘

@michaelweilmuenster5754 Ай бұрын

The bike sounds great. I was taught to soak the clutch disks in oil, seems correct to me. The modifications to the disks on the lathe were clever! I would have probably done it with a grinder and not thought twice about it. Keep doing what you're doing, good job!

@BrickHouseBuilds Ай бұрын

🤘🤘

@irocss85 Ай бұрын

This is important. When ever you use the impact super torque'er wrench you have to say "click" once the exact proper torque spec is achieved.

@BrickHouseBuilds Ай бұрын

It's measured in ugga duggas

@davidevelyn530 24 күн бұрын

Nice! I thought I was nuts after I repaired and renewed the clutch on my 97 Valkyrie. (Not as easy to access). It really felt different, as you noticed. Had 60K miles. This old fart really enjoys your videos. Much respect!

@BrickHouseBuilds 24 күн бұрын

🙏🙏

@paulgeek Ай бұрын

Man do I wish I was local to you. When I watch one of your videos I always give some serious thought to moving. Your videos are so exacting and give perfect instructions. Still not a fan of the 4 into 1 exhaust, prefer the all-original look. You are the master.....

@BrickHouseBuilds Ай бұрын

Well the orange cb750 in another recent video will tickle your fancy for stock exhaust. I'm just not a fan

@xanbiker Ай бұрын

That is the sign of a true mechanic you are able to fabricate to make parts work as in turning down those clutch ears. Never underestimate your abilities.

@BrickHouseBuilds Ай бұрын

🤘🤘

@pipersall6761 Ай бұрын

Another great and very informative video! Thank you!

@BrickHouseBuilds Ай бұрын

Glad you enjoyed!

@user-gn7cm6db2d Ай бұрын

Greqt job qnd still nice to see the 750s live definitely my best bike ever.

@BrickHouseBuilds Ай бұрын

This bike should live on quite a while still!

@outerfroggy1 Ай бұрын

The old school paper written directions on the gas tank 😅 love it

@BrickHouseBuilds Ай бұрын

Always has good signal!

@earliebraggs2763 29 күн бұрын

Had to laugh about your statement "whatever I do you guys are going to disagree" 😂 because you're right. Someone will. Enjoying your videos!!

@BrickHouseBuilds 29 күн бұрын

It's painfully true lol

@LS-uv9gg Ай бұрын

These old fours sound so beautiful. Yes, I know the TV show CHiPs bikes were 900/1000 Kawasakis, but the sound of these two together during the ride at the beginning, totally gave me the feels of the show sounds from ol' Ponch and Jon, heh heh.

@BrickHouseBuilds Ай бұрын

Hey that's cool in my book!

@chrisduffy8018 28 күн бұрын

Every video i learn something new! I wish you were here in Australia to work on my CB750. Keep the videos coming!

@BrickHouseBuilds 28 күн бұрын

Well thank ya!

@stevenharvey4695 21 күн бұрын

I love watching your videos ,you can’t please everybody , just have fun in whatever you do 👍👍👍👍

@BrickHouseBuilds 21 күн бұрын

🙏🙏

@kjc1878 Ай бұрын

If you fix it doesn't matter how you do it. Every mechanic does whatever gets the job done with the tools they are dealt with. Missouri here St louis.

@BrickHouseBuilds Ай бұрын

🤘🤘

@pk-teia6249 Ай бұрын

A true mechanic takes what he's got and makes what he needs. First thing I learned as a apprentice mechanic at a shipyard back in the mid eighties. Great job👍

@BrickHouseBuilds Ай бұрын

Agreed 100%

@kbjerke Ай бұрын

I'm a retired aircraft mechanic up north in Canada, eh? I've got one of those whackit drivers myself! Good job! 👍

@BrickHouseBuilds Ай бұрын

a whackit is a must have in the tool box

@leon0 Ай бұрын

You know, people can claim what they like on the internet. Talk is cheap. You do, and show what you do. Not just talk. I respect that. My the way, an air balloon is also an aircraft. Maybe MrNoItAllGasBag NoNoNo did his training on one of those and now just has his ropes in a twist. Ignore him, listen to the people who have something constructive to say. Thank you for this channel. Leon

@xxl531 20 күн бұрын

Pre soak works great , you can also install dry and run the bike 15 min at idle with the clutch lever in , at first start after clutch instal Just a tip from a motorcycle mecanic 😊

@earliebraggs2763 29 күн бұрын

And a lathe to modify your parts! You're the Man!! Great thought for that clutch plate mod!!

@BrickHouseBuilds 29 күн бұрын

Thank ya!

@gpzman9001 Ай бұрын

Improvise to survive. Brilliant. Well done.

@BrickHouseBuilds Ай бұрын

🤘🤘

@PeterSmith-kl3wl 24 күн бұрын

Nice bit of creative engineering,well done.👍😊✌️

@BrickHouseBuilds 24 күн бұрын

Absolutely 🤘

@jtnelson89 Ай бұрын

Those CB750s sound amazing

@BrickHouseBuilds Ай бұрын

Nothing like them!

@JaroslavP Ай бұрын

Very nicely done. Good sound of the work, jazzy music. The bike sounds very happy.

@BrickHouseBuilds Ай бұрын

Glad you enjoyed!

@aaronpeterson7501 Ай бұрын

These videos are great, makes me want to buy and older bike and not be scared of the work.

@BrickHouseBuilds Ай бұрын

I think it's a mindset thing. Expect to have to work on them and have fun with it

@richards61 Ай бұрын

That vice grip slide hammer is genius

@BrickHouseBuilds Ай бұрын

It's seriously a must have tool

@peteraitken6494 Ай бұрын

Hi Bj the clutch fix was ok by me if it works why not it’s your bike and you can do what you want buddy ,just love that bike man sounds great beats listening to the wife that’s for sure hahaha hope she doesn’t read this 😉 take care and have a great day to you and Seth his bike looks great 👌👍🏍️🏍️🏁🏁🔧🔧🔧👏👏❤️

@BrickHouseBuilds Ай бұрын

🤣🤣 I won't say anything

@paulwhite7475 Ай бұрын

You are so right LOL . I NEVER soak the plates . It makes them grab and stick together. Well it did once for me so now I dont do it . And if the gasket didnt break .... Put it back .

@bren42069 Ай бұрын

let the haters hate, your vids are gold. I'm working on a gs 450 right now, your vids were super helpful on that scrambler, gave me a lot of convidence. i'm watching this as i struggle with a valve cover bolt that snapped off in the head 😅

@BrickHouseBuilds Ай бұрын

🤘🤘

@dozer3955 Ай бұрын

Watching from Australia... Really enjoy your videos young man...

@BrickHouseBuilds Ай бұрын

Glad you enjoy them!

@daveco1270 Ай бұрын

Jogme probably works for Boing and is the reason that door fell off at 16,000 feet over Portland. HIs comments are kinda funny though, I'm sure he loved you hacking up that clutch plate on your lathe. I don't think english is his first language, which makes me wonder where he's from.

@BrickHouseBuilds Ай бұрын

😂😂

@brianwells5258 Ай бұрын

Great Video BJ....,always enjoy your content. Properly explained throughout and excellently presented.. Keep doing what you are doing..,just the way you are doing it..!! God bless BG.

@BrickHouseBuilds Ай бұрын

🙏🙏

@jefft4629 Ай бұрын

Nice modify/fix on this one BJ. This is YOUR bike, they are YOUR decisions to make. On a bike of this vintage, merely replacing parts is not always an option. I liked your workaround!

@BrickHouseBuilds Ай бұрын

🤘🤘

@yveslegrand9826 Ай бұрын

Working on a bike clutch is so much easier than on a car's. Much more delicate mechanical but so easy to access!

@BrickHouseBuilds Ай бұрын

Agreed lol. I just did a clutch on my transaxle Porsche 924 and it was a bear! Video here: kzfaq.info/get/bejne/fraIqLJ2vryqfaM.html

@doubleR-8 Ай бұрын

Stop giving jogme energy. I've tuned in for ages watching what you do. I enjoy your content, keep it up brother 👍

@BrickHouseBuilds Ай бұрын

He hasn't bothered me lol. I'm confident in my abilities but needed to point out his insanity

@brettcreech3490 Ай бұрын

Good job nice bike it sounds great.😎

@BrickHouseBuilds Ай бұрын

Thank ya!

@rolandwheeler4842 Ай бұрын

Nice job! Looks like you have the Little Machine Shop mini lathe. I have the mini mill at work and that thing gets the crap beat out of it and still performs. Their customer service is great as well. Parts always available.

@BrickHouseBuilds Ай бұрын

Yeah its a good unit. I do wish I could get the adjustments to stay tight though. Always fighting chatter

@adventurerider105 Ай бұрын

Fine Job

@BrickHouseBuilds Ай бұрын

🙏🙏

@GearHeadGeeks Ай бұрын

Soaking the plates, probably extends the life by a 50 or 60 take offs. Why would anyone object to doing that to a wet clutch?? Also using an impact is the best way to save the screw heads. Although your #3 Vessel has a built in impact, at least mine does. Again, why would anyone object?? I like using the DA on the metals, good idea. Here is a tip, before you release the cable, remove the case screws, pull the clutch and a light tap on the case and it will release it evenly so you don't have to use the slide hammer. And cutting down that plate is perfectly fine, I would have done exactly that.

@EwaldSchmidt Ай бұрын

That engine sounds sweet!

@BrickHouseBuilds Ай бұрын

A sohc cb750 with a 4 into 1 is pure zen 🤘

@EwaldSchmidt Ай бұрын

@@BrickHouseBuilds Very sad- a decade ago I bought a beautiful 1982 red CB 750 F with a 4 in one Cowley exhaust (South Africa) for a good price. It was standing for a long time when I bought it. And it leaked fuel from the carborettors, a stream. I don't have technical skills, and could not find anyone who could fix and sync the 4 carbs. Had to sell it again, without ever really enjoying it. You would have been the answer if we lived on the same continent. Years before I had a CB 400 N, and did many thousand happy miles on that bike.

@bensbobbershop33 Ай бұрын

I am also an aircraft mechanic! I think you do great work!

@BrickHouseBuilds Ай бұрын

Much appreciated!

@dwheeler016 Ай бұрын

Nice job

@BrickHouseBuilds Ай бұрын

Thank ya!

@bluehazeboy Ай бұрын

Quite lucky for you to get a few thousand miles out of it,as they’re usually stuck,I did my gs550 clutch a few years ago & the whole stack came out in one piece,super job mate

@BrickHouseBuilds Ай бұрын

Yeah these were pretty clean and came out easy!

@clivewalker5465 Ай бұрын

He builds Airplanes ... works for Boeing , perhaps ?

@BrickHouseBuilds Ай бұрын

🤣🤣🤣🤣🤣🤣

@kjc1878 Ай бұрын

Thats Not far from me

@jeffferguson899 Ай бұрын

great work

@BrickHouseBuilds Ай бұрын

Thank ya!

@davidhayter8516 21 күн бұрын

Miss my 4.

@allenmills9449 Ай бұрын

Love your videos, wish I could do a fraction of what you can

@BrickHouseBuilds Ай бұрын

Thank you

@Floki__Vilgerdarson Ай бұрын

My man learning new things everytime,dont mind the trolls they just jealous, if they are so mutch better where is their YT channel i wanna see ! Greetings from Norway

@BrickHouseBuilds Ай бұрын

I'm very lucky to have minimal trolls but mr @jogme wen't full temper tantrum so I had to make fun of it lol

@colinhead284 Ай бұрын

Here in England the CB650 was a bit of a rarity ( not the nighthawk ) The key and ignition barrel were so worn that while out on a ride the key jumped out , i didn't notice until i pulled up at my destination !! Stupidly i stuck my thumbnail in the ignition barrel and it would turn , so i thought if it turns off i can turn it back on . Err no , it wouldn't turn back on . i was lucky i was near a bike dealership near so i pushed it there , pleaded with the staff for help and they very kindly hot wired it to enable me to get home, when i got home i wasn't careful when i went to un wire it , touched the frame < have you ever heard a 30amp fuse blow ??

@flexjay87 Ай бұрын

Good video, interesting and educational. Pay no attention to the naysayers, if they are so smart, why are they watching ?

@BrickHouseBuilds Ай бұрын

They like to make sure they let everyone know they are doing it wrong

@garrethayes4083 Ай бұрын

She's running sweet apart from the clutch 😎👌

@BrickHouseBuilds Ай бұрын

Definitely

@andyplummer7270 Ай бұрын

Any excuse to use the lathe 😂 Another entertaining and educational video - keep doing what you're doing, you do it well 👍

@BrickHouseBuilds Ай бұрын

This was a "fun" experiment on said lathe. Was absolutely not the ideal clamping setup

@andyplummer7270 Ай бұрын

If it worked, it worked. If I had a lathe I'd be lathing the shit out of everything 😁

@REnfield2022 Ай бұрын

Honda 4 always had a super light feel to the clutch

@BrickHouseBuilds Ай бұрын

It's impressive that they pulled that off as well as having such a light kickstarter.

@FourIntoOne Ай бұрын

Been wrenching on bikes for over 40 years. I would have done the same in the same circumstances (and yes we all know it isn't the right way etc etc).

@BrickHouseBuilds Ай бұрын

Some can't see that logic for some reason lol

@kampatterson1865 Ай бұрын

Great video. I’ve never seen a slide hammer vice grip before ... makes sense though. Did you make that? Anyway agree with the others, modified clutch plate was a great solution. Even if it didn’t work it’s still worth trying . That’s how we get better, trial and error. Cheers

@BrickHouseBuilds Ай бұрын

Glad you enjoyed. I did make my slide hammer attachment but it's not an original idea. They sell a setup just like this.

@paulrooney8164 Ай бұрын

Mert Lawwill would be proud!

@BrickHouseBuilds Ай бұрын

🙏🙏

@S2NAZ Ай бұрын

The bike sounds better with the new clutch, is that weird? You sure have it running smooth 👍🏻

@BrickHouseBuilds Ай бұрын

It's definitely smooth 😎

@RobertAdams-wd6pt Ай бұрын

Yep every other video I have ever watched says to soak the plates before installing

@BrickHouseBuilds Ай бұрын

It's the logical thing to do yet people will still argue over it somehow lol

@joserantocb750 Ай бұрын

Hi, nice and fine job, the only think that I noticed is a rare movement of the RPM gauge needle after the repair, maybe is caused by a loose from its axis, with the age, seems to do it, i saw it a few times, so far, the video and the bike is spectacular.

@BrickHouseBuilds Ай бұрын

The bike is over 50 years old. The tach will not be precise like a modern vehicle.

@daveco1270 Ай бұрын

Good info. Thanks for doing this job on video. I have 1975 CB750K as my daily rider. and will replace the clutch eventually. Mine has a really nice light clutch, and a very stiff but smooth throttle. Do you have to remove the basket and hub or could you just take off the pressure plate then remove and replace the clutch plates? (Which is how it works on the old Triumphs.) Also, I didn't see any oil come out when you removed the inner cover. Did you drain the bike before doing this job or is there just not a lot of oil in the clutch normally?

@BrickHouseBuilds Ай бұрын

Thank ya. The basket does not have to be removed but since nothing is holding it in I prefer to just pull it out to clean and inspect. There really wasn't much of a chance of oil as these are dry sump bikes and I also had the bike strapped to the lift with a lean angle to the left to keep oil from flowing towards the clutch.

@mfc4591 Ай бұрын

All the Honda CB range seem to use, more or less the same idea and have just made things bigger or smaller depending on the bike. of course each one has its specifics, but it just shows, if something works dont mess with it.

@BrickHouseBuilds Ай бұрын

Agreed

@lovetoflylovetofly3843 Ай бұрын

Did you get on it with the new clutch? Did it grab well? Good stuff.

@BrickHouseBuilds Ай бұрын

I haven't been hard on it just yet but I'm confident it will grab just fine

@keithagn Ай бұрын

Its good industry practice to soak new clutch plates in oil. Unless its a dry clutch like in a car 😆! Regards from Canada 🇨🇦

@BrickHouseBuilds Ай бұрын

Lol yeah car clutch in oil no bueno!

@benthillerup Ай бұрын

If it works….. it works👍

@BrickHouseBuilds Ай бұрын

Exactly!

@ashleyritchie4948 Ай бұрын

U should soak a wet clutch, ur absolutely right ;-)

@juliosousa3785 Ай бұрын

show, muito bom o vídeo

@BrickHouseBuilds Ай бұрын

Glad you enjoyed!

@richardsink9198 Ай бұрын

If jogme builds aircraft for a living, what kind of aircraft? and what certifications does he have to be holier than thou? A bike is not an aircraft and you can get away with alot more on a road machine. I am a Mercedes Big rig mechanic and I would never re-use and oil seal on a customers truck, but in my home garage I would definitely do it. Great video BHB! Keep up the Great information!

@BrickHouseBuilds Ай бұрын

Thank ya!

@BasicPoke Ай бұрын

No no no, you have to soak only 3 of the friction disks. And you have to use 10w40. I'm kidding, man. Looks to me like you are doing a great job. I hope to see some challenge videos coming out soon. I have a cb750k6, fun bikes. Glad to see the JIS screwdriver. You don't use a torque wrench?

@BrickHouseBuilds Ай бұрын

Hahaha thank ya! Deep in the edit for the 48 hour challenge. My goal is to post Monday if I get it done

@dogman129 29 күн бұрын

Watching from Australia, it looked as if you applied a fair amount of toque to the pressure plate bolts, if you had to take a guess, how much toque do you think you applied?

@BrickHouseBuilds 29 күн бұрын

Id guess in the 15 lb/ft range but that is just going by the calibrated elbow

@norton794 Ай бұрын

I like your tank bag SAT NAV 😀😀😀😀👍👍

@BrickHouseBuilds Ай бұрын

Never loses service! 😉

@sqd37l Ай бұрын

I will be doing this in a few weeks. I hope it goes smooth

@BrickHouseBuilds Ай бұрын

Just take it slow and be methodical and you will be good!

@sqd37l Ай бұрын

@@BrickHouseBuilds thanks man!

@raymondpick4945 Ай бұрын

👍👍👍

@BrickHouseBuilds Ай бұрын

🙏🙏

@MrPotatochips4 Ай бұрын

I would have used a file or grinder. But then when the ig key was so worn down by use on '99 SV -33,000 mi., I used a hammer and a punch on an anvil to spread the metal a schoch. I just wanted to ride, not take the front end apart. Ipso facto.

@BrickHouseBuilds Ай бұрын

Different video?