No video
MY BMW'S MOTOR IS RUINED! (N54) - Belt Sucked Into Motor Part 1
Рет қаралды 22,212
Күн бұрынIn short, my 2009 BMW 535i with X-Drive is currently down for some time. N54's have are notorious for catastrophic engine failure happening due to belts being shredded and then getting sucked into the motor by breaking the crank seal. This is part 1 of a few videos that will explain what's happening as I go through the proper repair process to get my BMW back on the road and running reliably once again!
PART 2: • BMW's Belt Sucked Into...
PART 3: • BMW's Belt Sucked Into...
Like us on Facebook:
/ foulnewsnetwork
Follow us on Twitter:
/ foulnews
Follow us on Instagram:
/ foulnews
Check out our website:
www.foulnews.com
► Music Credit: LAKEY INSPIRED
Track Name: "Going Up"
Music By: LAKEY INSPIRED @ / lakeyinspired
Original upload HERE - www.youtube.co....
Official "LAKEY INSPIRED" KZfaq Channel HERE - www.youtube.co....
License for commercial use: Creative Commons Attribution 3.0 Unported "Share Alike" (CC BY-SA 3.0) License.
Full License HERE - creativecommon....
Music promoted by NCM goo.gl/fh3rEJ
► Music Credit: LAKEY INSPIRED
Track Name: "Distant"
Music By: LAKEY INSPIRED @ / lakeyinspired
Original upload HERE - / . .
Official "LAKEY INSPIRED" KZfaq Channel HERE - www.youtube.co....
License for commercial use: Creative Commons Attribution 3.0 Unported "Share Alike" (CC BY-SA 3.0) License.
Full License HERE - creativecommon....
Music promoted by NCM goo.gl/fh3rEJ
@vuluv6035 Жыл бұрын
yup my 335i unalived itself with belt snapping due to a coolant a oil leak , which i addressed 1 week before it snapped
@W333dm4n 2 жыл бұрын
I worked in a bmw shop one time this 535i came in looking like a locomotive, oil in the intake and in exhaust.. turbo failed miserably. It was a bitch to replace, the little screws for the coolant and oil lines,oh yeah loved doing those
@W333dm4n 2 жыл бұрын
Took forever, but got it done, felt good cuz the thing worked after and werent no leaks
@FoulNews 2 жыл бұрын
It is definitely a pain and a half to do! That's my next project with this one. 88,000mi and the turbos have failed. But to be fair, I was pushing them well over their designed rating.
@kronz619 4 жыл бұрын
really appreciate the information had the same thing happen to my car but I had it towed and now it's time to get in there and find out how much damage I've done
@FoulNews 4 жыл бұрын
Sorry to hear! It's a crappy situation!
@alexgovoru9748 4 жыл бұрын
i just bought a car like this and this i would recommend getting out as much material as you can and then let it sit for 3 months the oil will weaken the belt inside and the timing chain will break it up after that change you oil after 400 miles then again at 500 then 600 800 900 just keep doing that until you feel like you oil pump is safe
@Ninowitdavibez 4 жыл бұрын
Alex Govoru cool
@zlord1199 3 жыл бұрын
So what happened to your car?
@marsmi6571 5 жыл бұрын
Same thing happened to me but I got lucky and it didn’t breach the seal all the way. There’s one piece of the belt left that’s stuck but won’t budge. Should I give it some more muscle or should it come right out with the seal remover tools?
@FoulNews 5 жыл бұрын
I'd say if there's any belt that broke the seal, even if it' didn't break all the way, you'll definitely need to replace the seal. The seal removal tool should be able to get it out.
@user-hd8mw3bz1r 5 ай бұрын
Mom drove her 528i 3 miles after hard steering because steering fluid leak slipped belt gone to shreds. Thanks for videos. I have to make extra check. May check back to your info.
@smittysmat7826 5 жыл бұрын
Same thing just happened to my 328. Belt broke due to oil leak. Ripped out main oil seal and was apparently sucked into engine...as I quickly got a “low oil pressure” warning light. Figured my oil pickup tube is clogged with belt bits. I’ll be tearing into it soon. Not looking forward to it.
@FoulNews 5 жыл бұрын
That's unfortunate. Since the low oil pressure light came on, it would be a good idea to cut open the oil filter to see if any metal bits are in it. Also if you can, plastigauge the rod bearings to see if they're still within spec.
@pastorghawk 5 жыл бұрын
Same thing happened to my wife’s e90.. Unfortunately we had a shady mechanic try to fix it and he only made it worst... I now have a reputable guy working on it and should get it back tomorrow. Almost $5000 set back... Yikes.. I just thought about it.. Probably should have junked it but my wife loves the car sooooooooo.. Good luck and I look forward to seeing your next video...
@FoulNews 5 жыл бұрын
I'm sorry to hear that, that's really unfortunate! That's a lot of money, but hopefully once it's fixed it'll be good for quite a long time. Thank you, I'm still waiting on a shop to have space to let me use their lift, but I'm hoping to have some sort of update this week.
@BIMMERZEITT 4 жыл бұрын
Wow that really sucks. Did you ever fix this car?
@FoulNews 4 жыл бұрын
Sure did! Now the turbos are shot lol. That'll be a series in the future as well :)
@BIMMERZEITT 4 жыл бұрын
@@FoulNews Was the engine salvageable or did you get a new used engine? How many miles on the turbos?
@FoulNews 4 жыл бұрын
@@BIMMERZEITT Engine turned out okay. There's some wear on the cams and ledges, bearings looked okay, but slightly worn. It pretty much got aged a bit due to oil starvation, so when it goes finally, it goes. However compression and leakdown are good. Turbos are stock with 86k miles on them, but also they've been on 22psi on e40 for a while, so that has worn them down quite a bit lol.
@BIMMERZEITT 4 жыл бұрын
@@FoulNews haha wow I will dig into some of your other videos then to check out the car. My 335i has 184k and it is stock. Might MHD flash it soon
@FoulNews 4 жыл бұрын
@@BIMMERZEITT Thanks! I'll have some more cool stuff up as soon as I can for N54. Yeah, I'd say go for it. MHD is awesome, just make sure your maintenance kept on top of and you've done all supporting mods.
@brandonfokerman2703 4 жыл бұрын
Learned my lesson the hard way now I bought the N54 Crankseal plate from Oxwerkz
@FoulNews 4 жыл бұрын
Sucky lesson for sure, but the plate can be a life saver! I still check my belt weekly due to paranoia lol
@brandonfokerman2703 4 жыл бұрын
@@FoulNews Its also an expensive lesson
@Pierofelizzola 4 жыл бұрын
Had same shit on a 2010 535i xdrive I bought with low oil pressure but dropped oil pan and was able to clean it but looks like front seal has small leak......
@FoulNews 4 жыл бұрын
That's such a pain. You may need to redo the seal. I can't stand how expensive the sealant and primer are either.
@GrzegorzDurda Жыл бұрын
Did anyone with this issue ACTUALLY find belt pieces IN the engine and pieces in the drained oil?
@FoulNews Жыл бұрын
Yes. You can see it in Part 3 here: kzfaq.info/get/bejne/pK-egJOfzM6reok.html
@KozmikEl7 5 жыл бұрын
It can be done bro
@FoulNews 5 жыл бұрын
N54 Lord Yup, not looking forward to the job though. Hoping I’ll be able to start it next week, I’ll film the process too.
@MrLaloman18 4 жыл бұрын
535i n55 engines don't have this serpentine belt issues where it gets sucked into the motor! lol n55 engines fixed lots of n54 issues...
@Mr.MakeItHappen2 5 жыл бұрын
Got a 2008 bmw 535xi, wasnt that badd to change the crank pulley. Its just taking off the oil cooler, fan, and oil pan 🤦🏽♂️
@FoulNews 5 жыл бұрын
BrookieSmooth Yeah to get the crank pulley off wasn’t really that bad at all, but getting that oil pan off is something I’m not looking forward to.
@jake21328 3 жыл бұрын
How do you really prevents from happening?
@FoulNews 3 жыл бұрын
Crank seal belt guard and ensuring maintenance is properly done will prevent it.
@fisqual 2 жыл бұрын
don't buy a bmw. lol
@tonyrodriguez1622 4 жыл бұрын
Question , before taking the crank pulley off , did you see the strings of the belt with the pulley on ?
@FoulNews 4 жыл бұрын
Not after I yanked what was left of the belt off. It was only after I removed the pulley that I saw some bits of belt through the crank seal.
@tonyrodriguez1622 4 жыл бұрын
Foul News It just happened to me , but hopefully when I take the pulley off I don’t see the the seal fucked , After the battery light turned on , I stopped and went directly home about mile drive , all pulleys look healthy so if there’s no belt I’ll slap on a belt and take it to a shop
@FoulNews 4 жыл бұрын
@@tonyrodriguez1622 ah, sorry to hear. Definitely check the crank seal, it isn't something that you'd want to risk. Good luck, hopefully yours is still in tact!
@Ninowitdavibez 4 жыл бұрын
Tony Rodriguez any update bro happened to me & it died on me & had to get it towed
@tonyrodriguez1622 4 жыл бұрын
Sneaker Reviews Took crank pulley off and saw no belt inside crank seal , slapped on a new belt and oil filter housing gasket and car is running like new , if you strands of belt near the pulley most likely it’s been digested
@tonytrinh5815 5 жыл бұрын
Would I need to remove inlets or dci for just replacing belts and tensioner?
@FoulNews 5 жыл бұрын
It's possible to replace the belt without removing the front inlet or DCI, but it makes it much harder. To remove the pulleys, you'll need to remove the front intake filter and inlet, which should take you about 5 mins to do if you already have the fan and oil cooler out of the way.
@tonytrinh5815 5 жыл бұрын
Foul News ahh ok I will probably do that, I’m currently stuck in removing the t45 tensioner pulley bolt, I think I actually stripped it. What should I do?
@FoulNews 5 жыл бұрын
Tony Trinh If it’s stripped, I’d recommend going to the next size Torx bit and tapping it in with a hammer. I had to do that for my tensioner as well. I think it was a t47 I beat into the slot then I was able to turn it.
@tonytrinh5815 5 жыл бұрын
Foul News did you have to do that with the radiator off I’m just worried I don’t have enough room to hit it with a hammer.
@FoulNews 5 жыл бұрын
@@tonytrinh5815 I left the radiator in. I only removed the oil cooler and fan.
@Shmoneyteam34 5 жыл бұрын
Any Update ?? Just had my belt snap 2008 bmw 335i
@FoulNews 5 жыл бұрын
Sorry to hear. Yeah part 2 and 3 are up on the channel. I have to edit and upload parts 4 and 5 (final part) this weekend!
@FoulNews 5 жыл бұрын
Also feel free to message me if you have any questions on the process
@gixxerboyroyluvdrumswaters9023 Ай бұрын
Damn i liked my BMW now that this has happened, its problematic.
@contro 5 жыл бұрын
Pray for Foul News. 1 Like=1 Prayer
@FoulNews 5 жыл бұрын
Thank you, that's already helping.
@MegaPapout 5 жыл бұрын
I have the same problem after belt shredded into engine now it won’t start, can you please help me telling me what to do, I’m in Montreal.!
@FoulNews 5 жыл бұрын
What conditions happen when you go to start it? You'll need to remove the crank pulley to see if the belt got passed the crank seal.
@MegaPapout 5 жыл бұрын
Foul News yes I removed it and the belt passed the crank seal, i see pieces of belt in oil pan and in timing chain, I cleaned around the timing chain but the engine still won’t start
@FoulNews 5 жыл бұрын
@@MegaPapout Does the motor turn over at all? Can you rotate the crank with a ratchet or breaker bar?
@MegaPapout 5 жыл бұрын
Foul News yes but it like little heavy to turn .!
@FoulNews 5 жыл бұрын
@@MegaPapout If you can still rotate it, the motor is not seized. How long was it run for after the belt snapped? Did you also pull the oil pan to remove the belt from the oil pickup tube? What other symptoms occur when you try to start it?
@Ryan.E92 5 жыл бұрын
Just happens to me 3 days ago for the 2nd time
@FoulNews 5 жыл бұрын
Ryan Gonzalez that sucks man! I hope the new Oxwerkzperformance crank seal plate I ordered about two weeks ago comes in this week to prevent it from getting sucked in again!
@alexgovoru9748 4 жыл бұрын
i just bought a car like this and this i would recommend getting out as much material as you can and then let it sit for 3 months the oil will weaken the belt inside and the timing chain will break it up after that change you oil after 400 miles then again at 500 then 600 800 900 just keep doing that until you feel like you oil pump is safe
@FoulNews 4 жыл бұрын
I removed all the belt pieces in videos after this one. I throughly inspected the timing chain, cams, oil pickup, oil pump, and oil passages. There was no belt material left after I finished, so when doing the job correctly, there's no need to let it sit.
@alexgovoru9748 4 жыл бұрын
Foul News I bought one that was sitting lol pulled out the drain plug out in a camera fount sons belt material flushed it out and changed my oil like crazy it worked out for me
@BryanChance 3 жыл бұрын
Dont burn down your garage...lol
@FoulNews 3 жыл бұрын
It would make for a great thumbnail though 😂
@MrLaloman18 4 жыл бұрын
535i n55 engines don't have this serpentine belt issues where it gets sucked into the motor! lol n55 engines fixed lots of n54 issues...
@FoulNews 4 жыл бұрын
You're quite wrong about that. All N54, N55 and N52 engines have this same issue.
Дима Масленников
Рет қаралды 8 МЛН
Ultimate BMW Engine Showdown: N52 vs N54 vs N55 - Which One Should You Choose? | Comparison & Review
IzzyE9X
Рет қаралды 109 М.
Garage 54
Рет қаралды 4,3 МЛН
Jake Spence
Рет қаралды 171 М.