My Build of The Liberty Engine #3 - Finally Re-configured

Рет қаралды 12,925

6 ай бұрын

Пікірлер: 42

@gerryplayz4532 6 ай бұрын

The liberty people say ArgAlium alpha is the alloy, someone in their comments said that there's somewhere in england that sells it

@ScottFogarty-iv9wt 6 ай бұрын

Hello, If you find it, let me know. Thank you.

@alexgazzola8592 5 ай бұрын

hi, in my opinion there was an error in connecting the connectors coming from the power source, the blue connector should be moved from the center to the right to the end, you must connect the connectors correctly, they must be mirrored and the initial electric current it must pass in the right ways. try to check.

@user-ry7sl1eu6l 26 күн бұрын

and also the black one from the center must be moved to where the blue one is And the jumper must be connected because its missing. That is the difference i observed from the original video.

@gkeith4120 5 ай бұрын

Always interesting however, I don’t think that tenacity can overcome physics again did you talk to liberty engine to hear his BS response to DIRECT questions regarding the magic behind his videos?

@ScottFogarty-iv9wt 5 ай бұрын

No I haven't. I would be interested, however

@gkeith4120 5 ай бұрын

@@ScottFogarty-iv9wt TRY please and let us know.😩

@L3X369 6 ай бұрын

I followed you and noticed quite a big difference between the Liberty Engine I seen working and yours, besides the bar. It's the fact that the original liberty engine is based on 230 volts (it's made in Spain, EU) and you are pushing just 110V. Before scraping this, just get a 230 volt microwave motor and try that. (I don't know if the coils of the motor and the microwave transformer are also different in the US), but the little motor is definitely is. Other thing to try is to put a crank handle and spin it a bit more. Maybe it needs more juice to resonate.

@ScottFogarty-iv9wt 6 ай бұрын

Hello, Thank you. I still have some ideas (I won't be scrapping it).

@fawazohab7614 5 ай бұрын

He is correct scot

@fawazohab7614 5 ай бұрын

U need 240v to make a strong magnetic field

@christopherzurita9670 6 ай бұрын

Have you thought about giving the transformer base a magnetic charge. The phenomenon that the guy from Florida discovered to make the only monolithic structures in the US. He used a DC spark to magnetize his horse shoe magnet.

@ScottFogarty-iv9wt 5 ай бұрын

Hello, I'm going to test using an earth ground on the stand. Because of the flux from the outer pair of magnets, the stand is magnetized. It could be interfering with the direction of the flux. Thank you

@elmultimediaschoolofartscu3924 5 ай бұрын

Your wiring is definitely wrong. Is that Delta connection or...? I see an incomplete s❤😢 circuit, fix where you do not register electricity, that's where to fix only n ur good to go

@ScottFogarty-iv9wt 5 ай бұрын

Hello, I've changed it several times. I'm not sure if I should connect the capacitor in the circuit or not. I'm thinking that it should be. There aren't many wires so it shouldn't difficult to test. Thank you.

@user-ce5ff4fk5m 6 ай бұрын

I think he needs a piece of magnetized metal inside the motor in order to stimulate the electrical current and so that it does not lose its power.

@ScottFogarty-iv9wt 5 ай бұрын

Thank you

@user-fz2rr9dt8z 6 ай бұрын

Ahoj Scott, tyč je slitina paramagnetického a diamagnetického materiálu, to bude asi klíčové. Zhotovil jsem repliku engine 3 a dělalo mi to přesně, co tobě, taky budu dělat další pokusy.

@ScottFogarty-iv9wt 6 ай бұрын

Hello, GOOD. I hope others will also. Thank you

@bhothot 5 ай бұрын

Attach sync motor directly to the motor - just make sure its registering on the analog meter - cut the power bar out of the test. - "Reverse Volt protection circuit?"

@ScottFogarty-iv9wt 5 ай бұрын

I thought that could be an issue.

@user-ce5ff4fk5m 6 ай бұрын

إستعمل الألمنيوم لكن اضن الحل يكمن في وضع مغناطيس داخل المحرك .

@ScottFogarty-iv9wt 5 ай бұрын

Thank you

@longanghoai9881 5 ай бұрын

Still not working ?

@Naseeb8893 4 ай бұрын

Can i contact you somewhere? I wanted to ask if its working now? Im trying the same ,but it's not working And im starting to get frustrated 😢

@ScottFogarty-iv9wt 4 ай бұрын

Hello, I can understand your frustration. I have some ideas I will put in a video very soon. I hope you will keep up your work. Thank you.

@LI-pi9gu Ай бұрын

@@ScottFogarty-iv9wt 根据原视频的解释中间圆棒用的是（银铝）银和铝的混合新型材料目前市面上并未销售还处于实验阶段如果用铁棒外围包一层 N S 小磁铁块不知道可不可行个人想法

@ScottFogarty-iv9wt Ай бұрын

@@LI-pi9gu Hello, There are some other materials which might work such as Supermalloy and others. You can read about them here: softmagneticalloy.com I still believe it has to do with Resonance. The method of how the device is put into resonance has yet to be determined. Thank you.

@elvitacasimir3950 6 ай бұрын

Put magnet in argalium place

@ScottFogarty-iv9wt 5 ай бұрын

That might be a good idea. Thank you

@elvitacasimir3950 5 ай бұрын

Oui tu vas y arriver, quand tu vas ajouter les aimants, tu feras en sorte que les extrémités des aimants ne se rencontrent et les qui ne se rencontreront pas vont terminer en pôle Nord et Sud de manière à déjà créer un champ, maintenant tu resteras à activer ce champs à l'aide d'une energie non permanente

@SINANOZYOLDAS 4 ай бұрын

Since 15 years, I have been dealing with angular energy electricity generation systems (R&D). My positive designs about angular continue. In this regard, my own financial means are insufficient, I had meetings with many businessmen, they accepted the financing of the project, but they gave up when it came to signing a protocol, that is, when it came to formalisation. If there is an entrepreneur who will take firm steps with me on this path, who is idealistic, has financial means and wants to make an official protocol, I would like to meet. 98% of the published videos are wrong and do not work. I know the mistake they all make.

@zdenekzalis5916 6 ай бұрын

It looks like a duck, walks like a duck and quacks like a duck. Believe me, it will be a duck.

@ScottFogarty-iv9wt 5 ай бұрын

Hello, Is that a good thing?

@zdenekzalis5916 5 ай бұрын

@@ScottFogarty-iv9wt By the duck I meant it won't work. All these devices have one thing in common. Hidden power supply. This is not to say that there are no free energy devices, but these types are not one of them. I keep my fingers crossed for anyone who does honest research and doesn't scam people. Good luck

@zdenekzalis5916 5 ай бұрын