Love the build, great choice on Grips!

You should try putting the wing in the front. Gives a little more pressure on the belt pulling it into you more. Personally I find it comfortable

Love seeing other Asians getting out there training with their guns and not just showing. Have that almost same build, but with a Zev citadel slide. Hate that I have a gen 4 though, so Gen 4 Afterburner+ Ramjet rarely comes out. SRO is amazing, but heads up a friend that works at an FFL tells me SROs are by far the optic that gets warrantied the most. Obviously we don’t always know the exact reason why, but just something to know. Mine has been fine after 8k ish rounds of fairly intense schedule.

It's overlooked, but the chest tip is spot on. Hit the gym men. We all need to be in shape. Shout out to all law-abiding men.

Looks great👍 All high quality and reliable parts 👍👍

Started on an sig p320, moved to a Smith and Wesson 2.0 compact but gonna end on a a Glock 19 MOS cause it just flat out works. Asians in the gun community love to see it brother 💪

Just a tip with the trex arms holsters: take off the claw/wing and put it on in the FRONT of the holster for better concealment! Keep up with the content! Love seeing more asians in the gun community

Have the same exact setup except my 19.5 has the acro p-2 and the VA comp. Nice setup!

First video im watching from this channel and subbed right away!!! Keep it up bro

Clean pistol🔥💯

Hey nice seeing a handsome asian man protecting himself and his loved ones around him. :D I'm a weirdo and I carry a Glock 29SF that has a 4.67" extended ported barrel with a laser/light combo and +3 round pearce grip extensions. Also I have a Glock Trigger Pin Thumb Rest Ledge. The gas pedal, lol. Needed for 10mm follow-up shots. 12+1 and backup of 12, 10mm Auto.

duuuu maaaa nice setup man, im def gonna be doing this but with a glock 45 and acro

I just subscribed bro. 💯

Chefs kiss 🤌🏻 on that setup man. Like I said in a previous comment I run the gen4 34, ZEV Dragonfly slide cut for 2.5 SRO, Trijicon night sights, Full DK trigger, g17 mags with ZEV +5 base plates &mag well rounded off with a TLR1 HL.

Nice! I recently built one with a Brownell cutout slide for a ported barrel on a SCT 19 frame. Low cost, love it. My next project is a P320 with full/Compact/Carry setup

Holy crap! SRO, X300, and a ramjet!? That's a gucci glock already!

Love your Glock 19 setup

Glock 26 with an x grip and 15+1 in a Vedder holster with a claw and a wedge. Go up or down in capacity. Losing weight has helped tremendously with appendix carry even with more form fitting clothes on its right up against the body with no printing. Good review on this.

I have a really similar setup on my gen 4, except modified timney trigger with some Johnny Glock parts, Harrington arms comp and a 15# spring. But you have me thinking about ordering a 13# to try out. You’re the first one I’ve seen that didn’t run into an issue

Good info- thanks for sharing

I used to have a t.rex arms sidecar for my 19 but had to buy a new holster when I got my surefire x300 turbo and went with Tenicor Malus sol and it conceals incredibly well. Also I always carry a tourniquet as well as a handheld light

Nice setup and cool channel. I carry a zev duty g19 with the afterburner and an rmr. Love the acro though and have one on top of my lpvo

Dope set up

Need to get a Ram Jet for my Glock 17. Dope video.

I’m Laotian, shout out fellow south east brother. It’s too hard for me to conceal a g19 so I’ve just been carrying my 43x mainly. I’m also 5’6” lol

Carry a very similar setup just doing an SLR grip and extensions and went a lil gucci with a zev slide. The SRO is great, wish safariland holsters didnt have issues with them!

Very nice

Pro tip with the wing on that holster. Moving it to the front of the holster instead of the back greatly increases conceal ability.

Good Video man, love the setup. I carry something very simular, Glock 17 with Acro P2, Radian Ramjet and Afterburner and X300 in a T-Rex Sidecar

instant sub

Bro has like a 25in waist…OF COURSE he can carry that fucking thing lol😂

Can you make a video on how u conceal carry (like what belt you use to conceal in them sweat pants)

Wish I could grab the Radian system with a 43x, still convinced me to buy a comp and throw it on though :p.

great carry setup. i switch between carrying a CZ P10c and a staccato C2. both with x300T's and Acro P2s in QVO wingman holsters.

A very well thought out system as always. Having had a recoil spring fail during competition, I highly suggest having two recoil springs, mark one with an enamel marker so that you can tell the two apart, and use one for practice/training/competition, and the other one only for carry. 4:45 Wow, that light is bright, there's no way my $30 Gmconn 1200 lumen Amazon light could wash out the camera like that :) I would say that light has a floody beam (not foggy), compared to a light with a tight beam, a thrower. 14:36 I think the pin that came with the trigger is a firing pin safety, Glock calls it a plunger, and the reason it improves the trigger pull is because it is pushed up by the trigger bar and it being polished allows it to move with less resistance.

🔥🔥🔥🔥🔥

Did you notice a difference in grouping after installing the ramjet? Maybe I need to put more rounds through my ramjet but my grouping is noticeable compared to the stock barrel. The stock seems to be more accurate with smaller and consistent grouping.

Wish I had this setup. Unfortunately nobody makes good holsters for CZ P09 and streamlight TLR1HL. I don’t really want to carry my Glock 19x or 22 because I like DA/SA guns more. Great video!

Glock superiority, do you speak Vietnamese?

Big edc

The part on the slide is called the firing pin safety: plunger and spring. It is to prevent accidental discharge when you drop the pistol. I inform people who do certain mods to a conceal carry firearms: the prosecutor will use every alteration to describe it as a tactical or competition gun. Not a stock self defense weapon.

I quite literally carry almost the same setup as you and Anh cũng nói tiếng Việt. My current setup is a Glock 47 with a Trijicon SRO, Surefire X300 Turbo, Arc Division Reactor Slide, Kagwerks slide release, Agency mag release, and Carver Magwell with a brass weight all in a Trex arms side car 2.0. Also do you think you are going to make a discord community in the near future?

sick build but trust you should get rid of that mag release. overtime it'll eat away at the polymer on the magazine then it wont lock in anymore/ just start dropping out

Was thinking of getting the ramjet afterburner for my 19 but seen mixed reviews on it bc of price, how big of a difference does it make from a stock 19 is it worth it?

Tell me you are American without telling me you’re American 😂😂😂

Great Video. Can I ask you a question. I am new to gun world and trying to buy ear protection but is the higher decibel number better or lower better for the ear? It is so confusing. Also for eye protector can it be anything eye protector? Thanks

Good setup brotha 🤙

I was going to get a ram jet, just haven’t pulled the trigger yet.

The P2 is just better for the Cheeto dust when EDCing

how do you carry your knife? you carry only with jean or with sweat pants too?

X300-U all the way!

Another question to a fellow Asian…. Does your shirts get tiny pinholes where you AIWB? I asked on some Fb page but no one seems to have this issue. Thinking it’s just me having this issue. Ruined many shirts.

Yeah how big your actual red dot is somthing that is basically irrelevant for conceal carry. If u can afford a dot get one. It isn’t a conversation anymore

#GlaccatoGang

whatchu do or did to be able to afford all these beautiful guns homie 🤣

careful with that mag release.. if its metal it could eat away at what secures the mag in the gun and they will start to just fall out. metal on metal, plastic on plastic. I would recommend trying to find out if ppl have had any issues with it. if not then hell ya

how were you cc your weapon without tying your sweat pants really tight?

Nice but the G26/23👑💨🦌🐗🐻are the only two glocks you’ll ever need can edc both have both cals covered but only get MOS/RD in 9mms if you must don’t need RDs on pistols unless it’s a 🏁/hunt gun especially not on .40s 😂best to use Ameriglo Cap/XS sights fast irons

What grit did you use to sand the magwell?

Where did you order the ramjet from doesn’t look like radians site

What belt do you use?

Think of how your high dollar defensive tool will end up in the police evidence locker for maybe forever until your case gets resolved after a self defense situation… of course it saved you and your family’s life though but yes… think of how much time this high dollar tool will be staying in that evidence locker… I believe on KISS.. Just a thought and my opinion…

Can we get the link for the slide release? Please, and thank you

Are your afterburners recent production?

what ammo do you shoot with that comp??

Anyone knows where I can get the Texas map back slide plate? Did he mention it?

How did you find on Amazon?

Your carry gun is my duty gun. Radian ramjet, magwell, +5 mag extension, rmr, surefire. My concealed carry is a stock Glock 19. Don't need any lawyer trying to throw the narrative that I modded the gun to make it easier for me to kill. Also, stock Glock is lightweight. Concealed carry to me is for self-defense. You carry like you're ready for a gunfight.

"a handgun, spare mag, and a knife" Why no handheld light?

The perfect edc is one that works and thus internals shouldn’t be touched. I rock a glock 19 gen 3 and no matter how much I’d love an apex or timney trigger etc - anything that alters the glock, only serves to reduce its reliability, it will not be equal to or reliable, since you altered the most reliable platform, thus.. you’ve depressed its reliability - so it’s a bad move for edc

u have too muhc stuff on here

Have you've run the aimpoint

Where do u live bro?

Hard pass for me, but I'm more of a CZ P10c kinda guy (actually sold my glocks). Still a respectable setup.

I carry a custom G19 with an ACRO P2 and have no problem CC.... I genuinely wonder how people have such issues with legit every gun in CC lmfao...bw in decent shape and wear slightly baggy clothing and poof the gun is gone.

I carry full size m&p 2.0 10mm with a 4.6” barrel, tlr1hl, acro. I carry it easy, why? Cus I’m not a midget.

Tungsten recoil springs are overrated and super expensive imo. The DPP spring is superior in every way.

Dep gai Glock

Not for regular carry..

get a mic, makes quality way better

You copied ghg hustle dnt lie

the acro is 🤢🤢🤢

I still prefer 3 o clock carry.

whats up with zoomers and comps? have too much money or what?

Hey you never sent me an email for the giveaway i won after you asked for my email