How you only have 23k is beyond me. Awesome content, great quality, actually finishes projects, and shows attainable cars that a lot of people can relate to. Keep killing it Chris!

Underrated channel. Dude doesn’t click bait and gets straight to the point.🔥

I like how you do things right. Your meticulous about your builds, even cleaning everything before re-assembling them. Need more mechanics like you.

1 of only few KZfaq KZfaqrs that actually knows his stuff and finishes projects extremely fast . Love the content man keep it up

This man built himself a spaceship boys.

“I don’t know if this was built on a Friday, or they cracked a couple of cold ones before building it” 😂😂😂😂 I’m happy to hear her run, especially right before the Holidays

Watched every episode of this build back to back...enjoyed every minute. Awesome work. Merry Christmas everyone!

Been following for a while, you are a true inspiration! Wish I had a garage...

There's nothing better than seeing a Car rebuilt with LOVE by a true professional. You could work on my car ANY time. Great job

Sounds really good! You should keep this one. That way you have a boosted c6z, and a naturally aspirated one.

Such an underrated content creator. I like how you do mostly everything yourself. Keep up the great work!

I Really enjoy watchin' the projects you do & how ya explain what you're doin' Thanks

Love watching your channel grow! Keep up the great work!

Congrats chris! Love the channel! I'm a big chevy guy and enjoy watching your journey👍

Chris, I was whopping it up with you when you brought that baby to life! I followed the project from the start and really enjoyed the content. I'm learning a lot and really appreciate the detail you go into for disassembly and reassembly. Mad skills bro! I'm envious! I subscribed and will go back and watch your other videos. Keep up the great content.

Fantastic coverage if the LS7 replacement Chris!! Brings back old time memories of working on my 396! New to your channel but I Am Hooked!!!!! Keep up the great work!!

I'm 51 from Finland. I like to watch KZfaq videos while I'm doing my training indoor rowing 6times/week. I'm so happy to find your KZfaq channel. Great content, good music and different cars. Here in Finland, cars are twice as expensive as In USA. Thats why my car is only 2015 Mustang GT 23000miles.

Man in everyone of these videos your choice of music make me think your ✊🏾

Another awesome video Chris! Glad you brought the Z06 back to life…Merry Christmas to you and yours! You will be at 100k subs in no time.

Such a great feeling! Just had the same thing (to an extent) after blowing a head gasket on my 03 Cobra. After the tear down and rebuild nothing better than hearing that first fire!

Just watching some older videos and commenting for support. Great video

Texas speed headers is where it’s at. I’ve used their products for both Ford and GM and have had no issues.

Awesome videos! Love watching these builds.

F’n hells yeahs!! Think I was about as pumped as if I did the work! Ha! Great job my dude delivering great content on saucy vehiculars. Getting it done right!

shoutout to the High Noon chillin like a good boy on the electrical box

I want 0ne, exactly like what you you've built. Thanks for your video, your a Pro at how to!

criminally underrated, I told all of my friends ab you. such down to earth stuff bro

Went to watch the whole build. Nice!!

Bro this dude can do anything. I aspire to be like him

Love your videos man! Probably my favorite automotive channel right now. I gotta ask, where did you learn how to do all that you do? Seems like you can do just about anything.

Just subscribed yesterday and have been binge watching. Love the content. Keep the vids coming, please.

That thing sounds so good! C6 is my favorite body style for the Vette. One of these days I’ll own a Z06 or a ZR1. Can’t wait to see the rest of this build!

Dude, you make it look easy. I know you put a ton of work into this build. So nice to see you putting this Z back on the road again. I have an 09 Z06. These cars are monsters. Cheers.

The zinc content of conventional oil is what’s important for break in.

Chris watched the video. I am so happy for you that you got the car running. I only wish I had half the knowledge you have about building this car. Can't wait to see next video when you take it out on the road. Take care stay safe and Merry Xmas to you. :) 😁😁😁👍👍👍

Sounds insane. Can’t wait to see the finished product!

Nothing comes close to my sons birth, but this is pretty darn awesome bro! Excellent work and attention to detail.

I love your videos man I have a 2006 and I’m getting ready to do a clutch in it and I’m kind of dreading it but watching your videos is making it way easier lol

watching these videos is always so cool, keep up the awesome work !

Chris this Edwin from Florida Jacksonville I got two Corvettes myself I watched your channel every morning so I can learn myself

You Are A One Man "Wrecking Machine"!!! The G.O.A.T. of the Corvette World in My opinion!!! You're my New Favorite Channel Sir! 😎

Your Z sounds great.................Well done...👏

That 8mm socket was trying to disappear like they all do😆 congrats on your successful build. I don't know if you're formally trained for TIG welding, but stainless is unforgiving. Your welds are hot and the chromium has cooked out and it will rust in that area. I'd like to offer some tips for the next time you would be stainless. Measure the thickness of the material. For every thousands of an inch = 1 amp on the welder. Stainless can't get too hot, so you'll have to weld faster or increase your gas flow. Once you see the weld puddle, get moving! Overall good job bro, this is how men give birth! Enjoy that car💪🏆

Them Milwaukee ratchets are amazing in tight places. Made putting my headers on a Breeze.

I'm a recent subscriber, and growing fan of the work you do. I've built several cars over the years (I'm nearly 64), and finished the build of my 2010 C6 GS in January 2022, dyno'd at just over 500 rwhp (508/462). Nice manners, good street ride, nothing too rowdy. Question: I understand that your new LS7 bullet has a Cam motion custom stick, but can you please share the specs? Sorry if I missed the part where you already did - told us. I can't wait to see this on the dyno!! Merry Christmas to you & yours / and keep up the terrific DYI videos.

You gotta do some pov rides. Mount the camera so we can see the shifts. Overall love the videos

Makes me smile about owing a C6 here in germany, whenever I see your newest video, Chris. Big respect! Keep em coming!

Anyone else catch spidey senses when our dude was talking about the exhaust fitment issues??? Frame mount issue made it cheaper? Don’t wanna jinx it tho. Throwin heavy Debbie Downer vibes

My My Chris I feel your enthusiasm and I'm not even a Chevy GMC guy but you did a great job from the beginning I just want to see what the next step going to be and I'll be watching like normal

It sound insane man ! You deserve it for sure with all that work on that car ! Probably a very very good feeling of achievement ! Now i want a LS with a big shop cam !!!!

Glad to have found this channel. Fun to watch the C6 Z06 come back to life.

nice as your adidas cap is, should get a bad ass Chevy cap or an automotive one..but tell you what dude..that Corvette is a rock n roller..

Did you know Corvettes have a lubrication mode? Press the clutch to the floor and the gas to the floor and motor will crank but not fire. Make sure it’s in neutral. Great vid!

Just epic!! Your videos just get better !!! C6z sounds great keep up the great content!!! 💪🏽💪🏽💪🏽

Chris , you did wonderful engineering on that messed up exhaust system as it turned out great! I swear a lot of the online reviews are faked just to sell product!! Man the cammed exhaust note is pure music!!

Nice work brother! Love this guy! Really knows what he is talking about. Keep up the good work Chris! Hoping you dyno that Vette. Awesome!

Awesome video!! So great to see all that hard work and patience get rewarded this way!! Great job Chris! Looking forward to the next video!

Greetings from Germany. I like your videos very much. Please keep going.

I can tell without even asking that those are Texas speed headers. I had the exact same issue. Glad im not the only one lol

Awesome video! I really enjoy watching all of your projects. I'm pumped to see what's coming down the line!

Absolutely great channel!!! Great job on the Zo6!!!! Can’t wait for more videos of it!!

Mr. Sullivan Sir, you are a talented individual…stay stract! Love your content…keep up the great work!

My favorite new channel ive followed in awhile. Great overall video editing and content. Super stoked i found your page. Actually it was the V1 that originally had you pop up im my feed and after my first view sub’d.

Totally agree with your break in oil thoughts. I am using Driven BR30 and then will go synthetic. It's a spicy motor instead of a rebuild so that's why I chose to spend the money on it. Love your content bro. Cool to see someone learning and teaching others along the way.

Awesome Content! Just finished my 2008 Z-51 with a 525 GM Crate. Thanks for posting!

I just bought an oem tools coolant tool like yours. I don’t build engines but I have it just in case I need it and it seems like a great tool to have.

I’ve never heard to it referred to as “Horsepower Tuners” 😂. Awesome work!

Congratulations..your a smart dude..been following since you 1st bought this..dang you put alot of work in..Old Saying-"Hard Work Pays Off!!" Literally

Just subscribed. Great content. Thanks! I will be watching your future videos.

GAWT DAMM she sounds ROWDY!!!

Dude I have been nothing but excited for the content man, you give great insight on all of your tasks. Can’t wait for the body transformation dude!!! See you in the next one 💪🏼

Way to go Chris u doing a fine job looks like u know about engines God bless you keep up the good work

Man good job Chris……she’s gonna be a beauty! Phenomenal work man!!

I am not a LS guy but I wanna thank you for all the great info ..Who knows maybe I will upgrade to a Ls one day

The vette stuff makes this channel

That thing is a BEAST

Great job, Chris! You remind me of me 25 years ago. Keep the videos coming!

id like to be added to the waiting list to buy when you're finished.

Bad ass video brother, Merry Christmas all the best in 2023...and keep the videos coming.

I like the videos you put out before I even watch them cause I know they’re going to be good!!!

The HP tuners thing is pretty cool safety feature for your obd2. If it doesn’t recognize it when it’s plugged before starting

Exhaust fitment issues... brings back lots of bad memories. College student years and an amazing deal on a '97 SS Camaro T56 car. Badly warped shorty header flange so I buy new longtube headers. Straighten the oval'd collectors... not sure if shipping or poor quality control but could do that easily in the shop (FSAE team school). No room for the car so it goes to the mechanic. Many hours later ($$$ labor) and.. the headers don't fit. They're up-swept at the collector and hit the floor. Send them back, get another set from a different company and many hours ($$$) later, they are finally installed along with the x-pipe assembly, which needed modification ($$$) to work as well. Very expensive lesson in Murphy's Law and what it means to be a college student, working two jobs to pay for everything; don't take on extensive projects unless you can work on your own stuff somewhere. The frustration is real... I'm just happy I don't do this stuff for a living because it seems the "3 hour estimated project" stuff more often than not, turns into a fiasco for me... where I'm deep in it some 8+ hours later. I'd lose my ass.

She sounds great!

Man she sounds good , Great job Chris!

Chris as an aircraft mechanic by training i am impressed with your desire for cleanliness. Clean up of the dry sump to the removal of the oil cooler and lines - just top notch. You could never successfully get that debris out of the cooler or the intake for that matter. By the way what sort of tool did you use to draw a vacuum on your coolant system? I have never seen anything like it. Your vids are a lot of fun to watch and I will be going back through some of your older work to check them out. Safe and healthy New Year to you and your family.

Excellent work! I’m so impressed with your knowledge, skills and delivery in your videos!!

hell yeah, bro. i love ur content as a fellow ls7 man! i really wish that you spoke more about why you used Rotella for break-in, specifically. i know why you used it, but the average viewer may not know attributes of Rotella and its benefits during break-in. You're a great teacher.

Girl sounds legit!!!

That thing sounds awesome!!! Great job! Looking forward to a rear bumper camera and high rpm gear rowing!

Congrats Chris!!! She sounds excellent!! I wish you lived closer so I could learn first hand! Your knowledge is really impressive!

I been looking for a nice z06 with blown motor for awhile ! Nice score

Had nothing but issues with speed engineering headers and xpipe on my c6z. The headers were rubbing against the tunnel and the xpipe was almost impossible to get on. Ended up returning them and going with Texas speed longtubes.

Sounds so good - great work man

Great content, i have a 17 Z06 but have been wanting to build one of these for a road track.

Shiieeeetttt😮‍💨🤘🏻🤘🏻 add another one to the list, we’ll done good sir 🤜🏻🤛🏻

Just found you Chris!! Thank you, awesome content!! Ebay engine sounds like a total animal!! Great job. You have a way of making difficult jobs way to easy. Keep it up bud!!

Hey Chris, you (along with other factors) motivated me to start my own KZfaq channel showing my car builds. I have a 2017 C7 GS that I’m about to procharge and then plan to get a C6 Z06 to auto cross/road race. Any suggestions on camera/video setups that have worked for you? Enjoy the videos and maybe one day we can do some road pulls together! I’m based out of St. Louis!

Wow man, great work! I want one C6 LS7!

Eggggshaust. Lol I like the little purposefully misspelled words on your lists

You attention to detail and patience is excellent. Glad to see it fire up as expected!