My Control Setup for FlyJSim Q4XP with a Real Ex Q400 Pilot!

Рет қаралды 11,124

2 жыл бұрын

I have had a lot of questions about my control setup for the new FlyJSim Dash 8 Q400 so today I talk you through my settings for a smooth Dash 8 experience!
Check out www.320simpilot.com for guides, reviews and more!
Support the channel through our merchandise store! teespring.com/stores/320-sim-...
The 320 Sim Pilot Gaming PCs from Apex Gaming PCs! apexgamingpcs.com/products/a3...
Discord server for the latest videos, upcoming streams and general x plane and airbus chat! / discord
I am a real world Airbus pilot with thousands of hours flying the real aircraft and thought it would be fun to have a look at the new detailed simulation of the longest baby 'bus by Toliss as well as the new MSFS a320 NEO. Hopefully you find this useful and it brings another perspective to your simulation. Any thoughts or comments are welcome!
This video is intended for home entertainment only and does not reflect or represent any real world aircraft or airline procedures. It is for home flight simulator enthusiasts only and has no real world application. All views expressed are my own.
--------------------------------------------------------------------------------------------------------------------------
Intro Music by Fly24: • Distance Too Far.

Пікірлер: 20

@schmal911 2 жыл бұрын

15:50 - if anyone is looking to have fake detents so the prop lever cleanly snaps to them, here's my response curve for it: Reverse Axis: On Interp Mode: Linear [0.00, 0.00] [0.16, 0.00] [0.16, 0.33] [0.50, 0.33] [0.50, 0.67] [0.83, 0.67] [0.83, 1.00] [1.00, 1.00] This should make it way easier to select the detent you want.

@weswheel4834 7 ай бұрын

Really helpful video, thanks. I was trying to setup my Virpil CM3 throttle with the Q4XP (again has 2 detents, I've got the 2 bump detents installed on the CM3). Following this video I've got the detents setup for the DISC and Rating positions as you did, thanks :) And "Flaps lever" for the prop lever, nice.

@7218PeterH Жыл бұрын

Thanks for this - made my setup so much easier and your explanations are very useful too.

@ComSubGru9 2 жыл бұрын

Finally... been waiting for this.

@Waylander131 2 жыл бұрын

very good explanation. I have built my own throttle levers with detents, however I ran into an issue trying to setup the response curve, as the beta range was fixed to 0.33, and for the correct operation for Q4XP it need to be about 0.29. I found solution by unchecking the "beta/reverse" checkbox and then adjusting the thresholds, now it works fine. I have embedded a switch into the handle for gate toggle and it works fine.

@pegasus11030 Жыл бұрын

Thank you so much for your tutorial with super instruction 👏

@320SimPilot Жыл бұрын

You’re welcome 😊

@budguy21 2 жыл бұрын

Would have been helpful to have an inset of you moving the quadrant while the main screen showed the sim controls moving.

@aeysim 2 жыл бұрын

Thank you very much for this video. It worked great for me. It works perfectly too. However, FlyJSim should assign more joysticks for buttons. For example, I cannot assign josytic for speedbrake.

@virtualaviator21156 2 жыл бұрын

❤️❤️❤️

@Digingsw 2 жыл бұрын

Very helpful video - thanks; could I ask if you have set up the throttles with or without detents (ie smooth axes)

@320SimPilot 2 жыл бұрын

Thanks for watching! I have one throttle smooth and one with detents. I do this so I can feel them if I need them, but they don't get in the way of controlling the power! If I was only flying the Q400 I would probably remove them as you don't need them much (just set full forward to 'normal rating' detent).

@JoAviationandmore 2 жыл бұрын

Hello, I have the older version of the FlyJSim the Dash8 Q400 Legacy. I dont know for that q400 but I would like to know if it is the same version as mine but updated or if I want that version, I'l need to buy it?

@lordmashie 7 ай бұрын

Trying to configure the throttle on the TCA Sidestick (not the quadrant) and the response curve is THE most unintuitive UI I have ever used, I can not figure it out...

@pilotfly_ 2 жыл бұрын

how does it works with the single gate pass, cant find it

@brianthomson6896 2 жыл бұрын

I have had a very negative experience with the TCA hardware and software. They are NOT good or up to to the standards of previous quality of metal Thrustmaster controllers. Plastic doesn't work. I bought them based on your videos and was very disappointed.

@seandonno9248 2 жыл бұрын

Done over 300 hours with mine and still working great!

@budguy21 2 жыл бұрын

No issues here, they work great.

@schmal911 2 жыл бұрын

They're not awful, but yeah, the plastic quality is about as bad as it gets. I broke a reverser detent on my quadrant using barely any force after a few months (which I remarkably repaired using tons of hot glue). If I had to do it again, I would definitely go for a Bravo instead.